- 19 May, 2010 1 commit
-
-
Magnus Damm authored
Change INTCS_VECT_BASE from 0x3400 to 0x2200. The old value 0x3400 gave the INTCA and INTCS interrupt conrollers separated spaces, but required ARM support for more than 512 NR_IRQS which is not in place at this point. The value 0x2200 will make some of the INTCA interrupts make use of empty INTCS areas. This is a bit more error prone but works fine as a workaround for G3, G3 and AP4. Signed-off-by:
Magnus Damm <damm@opensource.se> Signed-off-by:
Paul Mundt <lethal@linux-sh.org>
-
- 18 May, 2010 1 commit
-
-
Russell King authored
GENERIC_TIME is now enabled by default, so 'select GENERIC_TIME' is redundant. Remove them. Signed-off-by:Russell King <rmk+kernel@arm.linux.org.uk>
-
- 14 Apr, 2010 2 commits
-
-
Kuninori Morimoto authored
Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by:
-
Kuninori Morimoto authored
Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by:
-
- 07 Apr, 2010 9 commits
-
-
Kuninori Morimoto authored
This patch add SDHI support for G4 board. Current gpio frame work doesn't have the method to control only pull-up/down/free. So, it have special gpio_pull_up function for SDHI. It is quick hack, so this function should be replaced by correct gpio frame work in future. Signed-off-by:
Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by:
-
Kuninori Morimoto authored
Signed-off-by:
-
Kuninori Morimoto authored
Add support for the sh7377 INTCS interrupt controller. INTCS is the interrupt controller for the sh7377 SuperH processor core. It is tied into the INTCA interrupt controller which interfaces to the ARM processor. INTCS support is implemented using a new INTC table together with a chained interrupt handler that ties into the already supported INTCA controller. Signed-off-by:
-
Magnus Damm authored
Add support for the sh7367 INTCS interrupt controller. INTCS is the interrupt controller for the sh7367 SuperH processor core. It is tied into the INTCA interrupt controller which interfaces to the ARM processor. INTCS support is implemented using a new INTC table together with a chained interrupt handler that ties into the already supported INTCA controller. Signed-off-by:
-
Magnus Damm authored
Add SH-Mobile ARM INTCS macros for the INTCS controller. Signed-off-by:
-
Kuninori Morimoto authored
Signed-off-by:
-
Kuninori Morimoto authored
Signed-off-by:
-
Kuninori Morimoto authored
Signed-off-by:
-
Kuninori Morimoto authored
sh7372 chip has 2 INTC. Then, I2C0 is connected to INTCS, and I2C1 is connected to INTCA. Both of these has no GPIO settings. Signed-off-by:
-
- 14 Mar, 2010 7 commits
-
-
Magnus Damm authored
Add SDHI0 platform data for the AP4EVB board V2. Signed-off-by:
-
Magnus Damm authored
Merge the SDHI vectors for sh7372 using the recently merged INTC force_enable/disable feature. With this in place SDHI hotplug is supported using the drivers sh_mobile_sdhi and tmio_mmc. Signed-off-by:
-
Magnus Damm authored
Merge the SDHI vectors for sh7377 using the recently merged INTC force_enable/disable feature. With this in place SDHI hotplug is supported using the drivers sh_mobile_sdhi and tmio_mmc. Signed-off-by:
-
Magnus Damm authored
Merge the SDHI vectors for sh7367 using the recently merged INTC force_enable/disable feature. With this in place SDHI hotplug is supported using the drivers sh_mobile_sdhi and tmio_mmc. Signed-off-by:
-
NISHIMOTO Hiroki authored
This patch adds KEYSC platform data for the G4EVM board. Signed-off-by:
NISHIMOTO Hiroki <nishimoto.hiroki@renesas.com> Signed-off-by:
-
Magnus Damm authored
This patch adds FLCTL platform data for the G3EVM board. Signed-off-by:
-
Magnus Damm authored
This patch adds KEYSC platform data for the G3EVM board. Signed-off-by:
-
- 25 Feb, 2010 1 commit
-
-
Kuninori Morimoto authored
Because AP4 board has capacitor for KEYSC, we need much time for waiting. Signed-off-by:
-
- 22 Feb, 2010 3 commits
-
-
Kuninori Morimoto authored
Signed-off-by:
-
Kuninori Morimoto authored
Signed-off-by:
-
Kuninori Morimoto authored
Signed-off-by:
-
- 18 Feb, 2010 2 commits
-
-
Kuninori Morimoto authored
Signed-off-by:
-
Kuninori Morimoto authored
Signed-off-by:
-
- 17 Feb, 2010 2 commits
-
-
Kuninori Morimoto authored
Signed-off-by:
-
Kuninori Morimoto authored
Signed-off-by:
-
- 14 Feb, 2010 3 commits
-
-
Kuninori Morimoto authored
This patch is based on Rev 0.5 manual Signed-off-by:
-
NISHIMOTO Hiroki authored
Add G4EVM platform data and a magic setup sequence to initialize the r8a66597 block aka USBHS in sh7377. Signed-off-by:
-
NISHIMOTO Hiroki authored
Add support for the sh 7377 pinmux using drivers/sh/pfc.c and some LEDs on G4EVM. Signed-off-by:
-
- 11 Feb, 2010 2 commits
-
-
Magnus Damm authored
Add G3EVM platform data and a magic setup sequence to initialize the r8a66597 block aka USBHS in sh7367. Signed-off-by:
-
Magnus Damm authored
Add support for the sh7367 pinmux using drivers/sh/pfc.c and select serial console pins and some LEDs on G3EVM. Signed-off-by:
-
- 09 Feb, 2010 3 commits
-
-
Magnus Damm authored
Add support for the sh7372 INTCA hardware block. Signed-off-by:
-
Magnus Damm authored
Add support for the sh7377 INTCA hardware block. Signed-off-by:
-
Magnus Damm authored
Add support for the sh7367 INTCA hardware block. Signed-off-by:
-
- 08 Feb, 2010 2 commits
-
-
Magnus Damm authored
Add support for early console to the SH-Mobile boards. Simply perform an early platform probe for "earlyprintk" to trigger the early serial console code in sh-sci.c. Signed-off-by:
-
Magnus Damm authored
Optimize the SH-Mobile interrupt assembly macros to avoid reloading the INTFLGA register address in case of multiple pending interrupts. Kindly pointed out by Russell King. Signed-off-by:
-
- 07 Feb, 2010 2 commits
-
-
Magnus Damm authored
This adds preliminary support for the SH7372 (SH-Mobile AP4) CPU and the AP4EVB reference board. Only timer, serial console and NOR flash are supported at this point. Support for the interrupt controller, pinmux support, clock framework and runtime pm will be submitted as feature patches on top of this. Signed-off-by:
-
Magnus Damm authored
This adds preliminary support for the SH7377 (SH-Mobile G4) CPU and the G4EVM reference board. Only timer, serial console and NOR flash are supported at this point. Support for the interrupt controller, pinmux support, clock framework and runtime pm will be submitted as feature patches on top of this. Signed-off-by:
-
