1. 07 Nov, 2005 12 commits
    • Benoit Boissinot's avatar
      Fix 'Driver using old /proc/net/wireless support, please fix driver !' message. · 97a78ca9
      Benoit Boissinot authored
      Wireless extensions moved the get_wireless_stats handler from being
      in net_device into wireless_handler.
      Signed-off-by: default avatarBenoit Boissinot <benoit.boissinot@ens-lyon.org>
      Signed-off-by: default avatarJames Ketrenos <jketreno@linux.intel.com>
      97a78ca9
    • Mike Kershaw's avatar
    • James Ketrenos's avatar
      Added wait_state wakeup on scan completion. · a0e04ab3
      James Ketrenos authored
      Fixed copyright date in ipw2200.h
      Signed-off-by: default avatarJames Ketrenos <jketreno@linux.intel.com>
      a0e04ab3
    • James Ketrenos's avatar
      Added cmdlog in non-debug systems. · f6c5cb7c
      James Ketrenos authored
      You can now specify via the module parameter 'cmdlog' to allocate a
      ring buffer for caching host commands sent to the firmware. They can
      then be dumped at any time via the sysfs entry 'cmd_log'
      Signed-off-by: default avatarJames Ketrenos <jketreno@linux.intel.com>
      f6c5cb7c
    • James Ketrenos's avatar
      Switched firmware error dumping so that it will capture a log available · b39860c6
      James Ketrenos authored
      via sysfs even if debugging disabled.  When a firmware error is
      captured, it will be dumped to the kernel log (if debug enabled) and
      captured in memory to be retrieved via sysfs.
      
      If an error has already been captured, subsequent errors will be
      dropped.
      
      The existing error can be cleared by writing to the error log entry.
      Signed-off-by: default avatarJames Ketrenos <jketreno@linux.intel.com>
      b39860c6
    • James Ketrenos's avatar
      Changed default # of missed beacons to miss before disassociation to 24 · d2021cb4
      James Ketrenos authored
      (vs. 9 which is too low in most environments)
      Signed-off-by: default avatarJames Ketrenos <jketreno@linux.intel.com>
      d2021cb4
    • Zhu Yi's avatar
      [bug 667] Fix the notorious "No space for Tx" bug. · d8bad6df
      Zhu Yi authored
      We send SYSTEM_CONFIG command after the TGI_KEY command if hardware
      encryption is enabled. It sometimes causes a firmware stall (firmware
      doesn't respond to any request) and finally bungs up the Tx send queue.
      The solution is to send SYSTEM_CONFIG command in the post association
      stage from a workqueue.
      Signed-off-by: default avatarJames Ketrenos <jketreno@linux.intel.com>
      d8bad6df
    • James Ketrenos's avatar
      Catch ipw2200 up to equivelancy with v1.0.5 · afbf30a2
      James Ketrenos authored
      * Fixed #452 problem with setting retry limit (thanks to Hong Liu)
      * Fixed #592 race condition during association causing firmware errors
      * Fixed #602 problem with building in 64-bit environment
      * Fixed #625 problem with SCAN_REQUEST_EXT sometimes failing
      * Fixed #645 problem with bit rate not decreasing when moving laptop
        farther from AP
      * Fixed #656 problem with 'iwconfig eth1 mode auto' and 'modprobe'
        locking the system
      * Fixed #667 problem with "No space for Tx" for hwcrypto=1
      * Fixed #685 kernel panic in rmmod caused by led work is still queued
      * Fixed #695 problem with network doesn't reassociate after suspend/resume
      * Fixed #701 problem with 'iwprvi sw_reset' not resetting the card from
        monitor mode
      * Fixed #710 problem with monitor mode being used after a WEP key has
        been configured
      * Fixed network->mode vs. priv->ieee->iw_mode checking (thanks to Ben Cahill)
      * Fixed "Unknown management packet %d" warning
      * Fixed setting channels multiple times in monitor mode causes scan stopped
      * Fixed ipw_wx_sw_reset doesn't switch firmware if mode is changed.
      * Add duplicate packet checking code (kill ping DUP! and TKIP replay warning)
      * Fix hardware encryption (both WEP and AES) doesn't work with fragmentation.
      Signed-off-by: default avatarJames Ketrenos <jketreno@linux.intel.com>
      afbf30a2
    • James Ketrenos's avatar
      Catch ipw2200 up to equivelancy with v1.0.4 · b095c381
      James Ketrenos authored
      * Fixed #627 problem with open APs not working with wpa_supplicant
      * Fixed #632 problem with 'txpower auto' setting power incorrectly (thanks
        to Kai Groner)
      * Fixed #634 problem with 'iwconfig eth1 frag 0' hanging the shell
      * Fixed problem with adapter not fully powering off during suspend to RAM or
        when module unloaded.
      * Fixed #645 problem with turning fixed rates off not taking effect until
        you reload the driver
      * Fixed problem with firmware restart if wpa_supplicant was used to set a key
        that wasn't exactly 5 or 13 bytes in length.
      * Fixed #623 Added iwpriv sw_reset extension to reset sw parameters
      * Added managment frame export to user space with frame statistics
      * Fixed #652 Modified the driver to load the EEPROM data even if RF KILL is
        active during driver load
      * Global s:CX2_:IPW_:g to make code more consistent
      * Fixed #572 problem with setting txpower to auto
      * Fixed #656 problem with kernel oops if mode auto; modprobe -r ipw2200
      * Added QoS (CONFIG_IPW_QOS) support.  This is being actively developed but
        is the first step in getting WMM support into the driver and the kernel.
      * Fixed some race conditions with channel changes, association, and scan
        abort that could periodically cause a firmware restart.
      * Added some extensions to export scan and network statistics to user space
        (exposed through speed_scan and net_stats sysfs entries)
      * Fixed a few bugs in how monitor mode was supported (scan lists
        weren't quite right)
      * Updated the firmware requirement from 2.2 to 2.3 which supports
        monitor mode.
      Signed-off-by: default avatarJames Ketrenos <jketreno@linux.intel.com>
      b095c381
    • James Ketrenos's avatar
      Catch ipw2200 up to equivelancy with v1.0.3 · c848d0af
      James Ketrenos authored
      * Fix #616 problem with OOPS on module load (thanks to Yi Zhu)
      * Fixed problem with led module parameter being described as
        'auto_create'
      * Added support to merge between adhoc networks (thanks to Mohamed Abbas)
      * Added semaphore lock at the driver's entry points to protect against
        re-entry (thanks to Mohamed Abbas)
      * Added semaphore lock to background scheduled driver actions (thanks to
        Mohamed Abbas)
      * Changed how signal quality is reported for scan output (thanks to
        Peter Jones)
      * Fixed how high/low clamp values of signal quality are reported so a
        more consistent ramp is provided (thanks to Bill Moss)
      * Fix #624 problem with duplicate addresses (again)  (thanks to Bernard
        Blackham)
      * Fix #385 problem with fragmentation and certain sized packets (thanks
        to Mohamed Abbas)
      * Modified iwconfig network name if RF kill is enabled to say 'radio off'
      * Fix #382 problem with driver not responding to probe requests in Ad-Hoc
        mode (thanks to Mohamed Abbas)
      Signed-off-by: default avatarJames Ketrenos <jketreno@linux.intel.com>
      c848d0af
    • James Ketrenos's avatar
      Catch ipw2200 up to equivelancy with v1.0.2 · a613bffd
      James Ketrenos authored
      Removed unneeded parenthesis around numeric constant defines
      
      Added support for iwspy
      
      Put in fix for Ad-Hoc mode not passing through all packets (thanks to KKH)
      
      Put in fix for fragmentation not working for fragment sizes between
      441-464 bytes (thanks to Mohamed Abbas)
      
      Fixed #592 problem of CONFIG_IEEE80211_WPA_MODULE not including WPA
      support into the driver -- fixed as a result of no longer limiting WPAs
      inclusion
      
      Fixed #594 problem with user rates mask causing lack of association if
      AP mandatory rate is masked out.  We now add back in as a supported rate
      any mandatory rate.
      
      Fixed #597 kernel oops due to calling dev_kfree_skb on an skb multiple times.
      
      Added code to control LEDs that can be controlled through the wireless
      NIC (vs. non-wireless HW interfaces) -- this is currently disabled by
      default due to reports by some users of it hanging their laptop.
      
      Added some more debug messages around fragmentation logic
      
      Added locking around STATUS_HCMD_ACTIVE to prevent re-entry race
      conditions
      
      Moved ipw_adapter_restart to only execute on the priv->workqueue to
      keep keyboard errors from occuring during adapter restart
      
      Added CFG_BACKGROUND_SCAN to easily allow people to play with
      background scanning implementations
      
      Modified WPA logic to send WPA IE if one is set (vs. being based on
      wpa_enabled)
      
      Modified scan result logic to report WPA and RSN IEs if set (vs. being
      based on wpa_enabled)
      
      Fixed issues with endianess compatability between the host and
      wireless adapter (thanks to York Liu and Yi Zhu)
      
      Fixed problem with Ad-Hoc network creation causing a firmware error if
      a scan was actively running (thanks to Mohamed Abbas)
      Signed-off-by: default avatarJames Ketrenos <jketreno@linux.intel.com>
      a613bffd
    • James Ketrenos's avatar
      Catch ipw2200 up to equivelancy with v1.0.1 · ea2b26e0
      James Ketrenos authored
      This commit contains the following fixes:
      
      Fixed #559: iwconfig rate support (thanks to Florian Hackenberger)
      
      Improved link signal quality calculation (thanks to Bill Moss)
      
      Fixed a problem with sensitivity threshold during association
      
      Added iwpriv for turning forcing long preamble support:
        % iwpriv eth1 set_preamble 1|0
      
      Fixed #542 and #377 support for short preamble
      
      Fixed locked BSSID reporting channel number (thanks to Pedro
      Ramalhais)
      
      Fixed type-o with scan watchdog timeout message (thanks to Pedro
      Ramalhais)
      
      Changed logic for displaying get_mode output so the code is easier to
      follow (thanks to Pedro Ramalhais)
      
      Added initial support for WPA (thanks to Yi Zhu) -- tested with
      wpa_supplicant (either tip w/ ipw driver, or with -Dipw2100) with
      both CCMP and TKIP
      
      Fixed problem with CCMP not working due to uninitialized 802.11
      header fields (thanks to Pedro Ramalhais)
      
      Bug references are to defects stored on http://bughost.orgSigned-off-by: default avatarJames Ketrenos <jketreno@linux.intel.com>
      ea2b26e0
  2. 21 Sep, 2005 1 commit
  3. 06 Sep, 2005 2 commits
  4. 05 Sep, 2005 1 commit
  5. 25 Aug, 2005 2 commits
  6. 31 Jul, 2005 1 commit
  7. 27 May, 2005 1 commit