- 21 Jan, 2014 10 commits
-
-
Santosh Shilimkar authored
Switch to memblock interfaces for early memory allocator instead of bootmem allocator. No functional change in beahvior than what it is in current code from bootmem users points of view. Archs already converted to NO_BOOTMEM now directly use memblock interfaces instead of bootmem wrappers build on top of memblock. And the archs which still uses bootmem, these new apis just fallback to exiting bootmem APIs. Signed-off-by:
Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Paul Walmsley <paul@pwsan.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Russell King <linux@arm.linux.org.uk> Cc: Tejun Heo <tj@kernel.org> Cc: Tony Lindgren <tony@atomide.com> Cc: Yinghai Lu <yinghai@kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Santosh Shilimkar authored
Introduce memblock memory allocation APIs which allow to support PAE or LPAE extension on 32 bits archs where the physical memory start address can be beyond 4GB. In such cases, existing bootmem APIs which operate on 32 bit addresses won't work and needs memblock layer which operates on 64 bit addresses. So we add equivalent APIs so that we can replace usage of bootmem with memblock interfaces. Architectures already converted to NO_BOOTMEM use these new memblock interfaces. The architectures which are still not converted to NO_BOOTMEM continue to function as is because we still maintain the fal lback option of bootmem back-end supporting these new interfaces. So no functional change as such. In long run, once all the architectures moves to NO_BOOTMEM, we can get rid of bootmem layer completely. This is one step to remove the core code dependency with bootmem and also gives path for architectures to move away from bootmem. The proposed interface will became active if both CONFIG_HAVE_MEMBLOCK and CONFIG_NO_BOOTMEM are specified by arch. In case !CONFIG_NO_BOOTMEM, the memblock() wrappers will fallback to the existing bootmem apis so that arch's not converted to NO_BOOTMEM continue to work as is. The meaning of MEMBLOCK_ALLOC_ACCESSIBLE and MEMBLOCK_ALLOC_ANYWHERE is kept same. [akpm@linux-foundation.org: s/depricated/deprecated/] Signed-off-by:
Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by:
-
Santosh Shilimkar authored
The memblock current limit value is used to limit early boot memory allocations below max low memory address by default, as the kernel can access only to the low memory. Hence, set memblock current limit value to the max mapped low memory address instead of max mapped memory address. Signed-off-by:
-
Tang Chen authored
At very early time, the kernel have to use some memory such as loading the kernel image. We cannot prevent this anyway. So any node the kernel resides in should be un-hotpluggable. Signed-off-by:
Tang Chen <tangchen@cn.fujitsu.com> Reviewed-by:
Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "Rafael J . Wysocki" <rjw@sisk.pl> Cc: Chen Tang <imtangchen@gmail.com> Cc: Gong Chen <gong.chen@linux.intel.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Len Brown <lenb@kernel.org> Cc: Liu Jiang <jiang.liu@huawei.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Taku Izumi <izumi.taku@jp.fujitsu.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Renninger <trenn@suse.de> Cc: Toshi Kani <toshi.kani@hp.com> Cc: Vasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Yinghai Lu <yinghai@kernel.org> Signed-off-by:
-
Tang Chen authored
When parsing SRAT, we know that which memory area is hotpluggable. So we invoke function memblock_mark_hotplug() introduced by previous patch to mark hotpluggable memory in memblock. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
-
Tang Chen authored
[sfr@canb.auug.org.au: fix powerpc build] Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
Mel Gorman authored
Commit 4b59e6c4 ("mm, show_mem: suppress page counts in non-blockable contexts") introduced SHOW_MEM_FILTER_PAGE_COUNT to suppress PFN walks on large memory machines. Commit c78e9363 ("mm: do not walk all of system memory during show_mem") avoided a PFN walk in the generic show_mem helper which removes the requirement for SHOW_MEM_FILTER_PAGE_COUNT in that case. This patch removes PFN walkers from the arch-specific implementations that report on a per-node or per-zone granularity. ARM and unicore32 still do a PFN walk as they report memory usage on each bank which is a much finer granularity where the debugging information may still be of use. As the remaining arches doing PFN walks have relatively small amounts of memory, this patch simply removes SHOW_MEM_FILTER_PAGE_COUNT. [akpm@linux-foundation.org: fix parisc] Signed-off-by:
Mel Gorman <mgorman@suse.de> Acked-by:
David Rientjes <rientjes@google.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: James Bottomley <jejb@parisc-linux.org> Signed-off-by:
-
Wanlong Gao authored
arch/sh/kernel/kgdb.c: In function 'sleeping_thread_to_gdb_regs': arch/sh/kernel/kgdb.c:225:32: error: implicit declaration of function 'task_stack_page' [-Werror=implicit-function-declaration] arch/sh/kernel/kgdb.c:242:23: error: dereferencing pointer to incomplete type arch/sh/kernel/kgdb.c:243:22: error: dereferencing pointer to incomplete type arch/sh/kernel/kgdb.c: In function 'singlestep_trap_handler': arch/sh/kernel/kgdb.c:310:27: error: 'SIGTRAP' undeclared (first use in this function) arch/sh/kernel/kgdb.c:310:27: note: each undeclared identifier is reported only once for each function it appears in This was introduced by commit 16559ae4 ("kgdb: remove #include <linux/serial_8250.h> from kgdb.h"). [geert@linux-m68k.org: reworded and reformatted] Signed-off-by:
Wanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by:
Geert Uytterhoeven <geert+renesas@linux-m68k.org> Reported-by:
Fengguang Wu <fengguang.wu@intel.com> Acked-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Geert Uytterhoeven authored
Commit 5fbbf8a1 ("Score: The commit is for compiling successfully.") re-introduced "select HAVE_GENERIC_HARDIRQS" in v3.12-rc4, which had just been removed in v3.12-rc1 by 0244ad00 ("Remove GENERIC_HARDIRQ config option"). Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Cc: Chen Liqin <liqin.linux@gmail.com> Cc: Lennox Wu <lennox.wu@gmail.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Stefan Agner authored
Depending on the regulator version, the voltage table might be different. Use version specific regulator tables in order to select correct voltage table. For the following regulator versions different voltage tables are now used: * TPS658623: Use correct voltage table for SM2 * TPS658643: New voltage table for SM2 Both versions are in use on the Colibri T20 module. Make use of the correct tables by requesting the correct SM2 voltage of 1.8V. This change is not backward compatible since an old driver is not able to correctly set that value. The value 1.8V is out of range for the old driver and will refuse to probe the device. The regulator starts with default settings and the driver shows appropriate error messages. On Colibri T20, the old value used to work with TPS658623 since the driver applied a wrong voltage table too. However, the TPS658643 used on V1.2 devices uses yet another voltage table and those broke that pseudo-compatibility. The regulator driver now has the correct voltage table for both regulator versions and those the correct voltage can be used in the device tree. Signed-off-by:
Stefan Agner <stefan@agner.ch> Reviewed-by:
Thierry Reding <treding@nvidia.com> Acked-by:
Mark Brown <broonie@linaro.org> Acked-by:
Stephen Warren <swarren@nvidia.com> Signed-off-by:
Lee Jones <lee.jones@linaro.org>
-
- 20 Jan, 2014 1 commit
-
-
Ingo Molnar authored
We don't support LWP yet, don't give the impression that we do: represent the LWP state as opaque 128 bytes, the way Linux sees it currently. Cc: Qiaowei Ren <qiaowei.ren@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/n/tip-ecarmjtfKpanpAapfck6dj6g@git.kernel.org Signed-off-by:
Ingo Molnar <mingo@kernel.org>
-
- 19 Jan, 2014 1 commit
-
-
Finn Thain authored
For SCC initialization we cannot assume that the control register is in the correct state to accept a register pointer. So first read from the control register in order to "sync" up. Signed-off-by:
Finn Thain <fthain@telegraphics.com.au> Signed-off-by:
-
- 17 Jan, 2014 3 commits
-
-
Heiko Carstens authored
The s390 bpf jit compiler emits the signed divide instructions "dr" and "d" for unsigned divisions. This can cause problems: the dividend will be zero extended to a 64 bit value and the divisor is the 32 bit signed value as specified A or X accumulator, even though A and X are supposed to be treated as unsigned values. The divide instrunctions will generate an exception if the result cannot be expressed with a 32 bit signed value. This is the case if e.g. the dividend is 0xffffffff and the divisor either 1 or also 0xffffffff (signed: -1). To avoid all these issues simply use unsigned divide instructions. Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
SO_MAX_PACING_RATE definition on parisc got a typo. Its not too late to fix it, before 3.13 is official. Fixes: 62748f32 ("net: introduce SO_MAX_PACING_RATE") Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Qiaowei Ren authored
This patch adds all the MPX instructions to x86 opcode map, so the x86 instruction decoder can decode MPX instructions. Signed-off-by:
Qiaowei Ren <qiaowei.ren@intel.com> Link: http://lkml.kernel.org/r/1389518403-7715-4-git-send-email-qiaowei.ren@intel.com Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by:
H. Peter Anvin <hpa@linux.intel.com>
-
- 16 Jan, 2014 13 commits
-
-
Fengguang Wu authored
This is a cleanup proposed by coccinelle. It replaces memcpy with struct assignment on intel-mid's sfi layer. Generated by: coccinelle/misc/memcpy-assign.cocci Signed-off-by:
David Cohen <david.a.cohen@linux.intel.com> Signed-off-by:
-
David Cohen authored
This patch cleans up get_gpio_by_name() to return an error code instead of hardcoded -1. Signed-off-by:
-
David Cohen authored
This patch does cleanup on all intel mid platform code that uses gpio_get_by_name() function. From now on they should check for any error code instead of only hardcoded -1. There are no functional changes from this change. Signed-off-by:
-
David Cohen authored
When Intel MID finds a match between SFI table from FW and registered SFI devices, it will always register a device regardless the platform code was successful or not. This patch adds an extra option for platform code to return error code and abort device registration on SFI table parsing. This patch does not contain any functional changes for current intel mid platform code. Signed-off-by:
-
H. Peter Anvin authored
If we aren't going to use the local APIC anyway, we obviously don't care about its timer frequency. Link: http://lkml.kernel.org/r/tip-rgm7xmg7k6qnjlw3ynkcjsmh@git.kernel.org Reported-by:
-
Catalin Marinas authored
This reverts commit 2f7dc602 . The above commit breaks the mapping type for Device memory because pgprot_default already contains a Normal memory type. pgprot_default is also not initialised early enough for earlyprintk resulting in an inconsistent memory mapping with 64K PAGE_SIZE configuration. Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Reported-by:
Will Deacon <will.deacon@arm.com> Acked-by:
-
Hendrik Brueckner authored
Signed-off-by:
Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Hendrik Brueckner authored
Signed-off-by:
-
Sherman Yin authored
Enable pinctrl for Broadcom Capri (BCM281xx) SoCs. Signed-off-by:
Sherman Yin <syin@broadcom.com> Reviewed-by:
Christian Daudt <bcm@fixthebug.org> Reviewed-by:
Matt Porter <matt.porter@linaro.org> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org>
-
Sherman Yin authored
Adds pinctrl driver for Broadcom Capri (BCM281xx) SoCs. v4: - PINCTRL selected in Kconfig, PINCTRL_CAPRI selected in bcm_defconfig - make use of regmap - change CAPRI_PIN_UPDATE from macro to inline function. - Handle pull-up strength arg in Ohm instead of enum v3: Re-work driver to be based on generic pin config. Moved config selection from Kconfig to bcm_defconfig. v2: Use hyphens instead of underscore in DT property names. Signed-off-by: -
Peter Zijlstra authored
Fengguang Wu's kbuild test robot reported the following new m68k warnings: In file included from drivers/nubus/nubus.c:22:0: >> arch/m68k/include/asm/mac_via.h:262:47: warning: 'struct irq_desc' declared inside parameter list [enabled by default] >> arch/m68k/include/asm/mac_via.h:262:47: warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default] Caused by the reworking of the generic local_bh{dis,en}able() code. To fix it, forward declare 'struct irq_desc'. Reported-by:Peter Zijlstra <peterz@infradead.org> Acked-by: geert@linux-m68k.org Link: http://lkml.kernel.org/r/20140112212456.GQ7572@laptop.programming.kicks-ass.net Signed-off-by:
-
Robert Richter authored
On AMD family 10h we see following error messages while waking up from S3 for all non-boot CPUs leading to a failed IBS initialization: Enabling non-boot CPUs ... smpboot: Booting Node 0 Processor 1 APIC 0x1 [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu perf: IBS APIC setup failed on cpu #1 process: Switch to broadcast mode on CPU1 CPU1 is up ... ACPI: Waking up from system sleep state S3 Reason for this is that during suspend the LVT offset for the IBS vector gets lost and needs to be reinialized while resuming. The offset is read from the IBSCTL msr. On family 10h the offset needs to be 1 as offset 0 is used for the MCE threshold interrupt, but firmware assings it for IBS to 0 too. The kernel needs to reprogram the vector. The msr is a readonly node msr, but a new value can be written via pci config space access. The reinitialization is implemented for family 10h in setup_ibs_ctl() which is forced during IBS setup. This patch fixes IBS setup after waking up from S3 by adding resume/supend hooks for the boot cpu which does the offset reinitialization. Marking it as stable to let distros pick up this fix. Signed-off-by:
Robert Richter <rric@kernel.org> Signed-off-by:
-
Peter Zijlstra authored
Waiman managed to trigger a PMI while in a emulate_vsyscall() fault, the PMI in turn managed to trigger a fault while obtaining a stack trace. This triggered the sig_on_uaccess_error recursive fault logic and killed the process dead. Fix this by explicitly excluding interrupts from the recursive fault logic. Reported-and-Tested-by:
Waiman Long <waiman.long@hp.com> Fixes: e00b12e6 ("perf/x86: Further optimize copy_from_user_nmi()") Cc: Aswin Chandramouleeswaran <aswin@hp.com> Cc: Scott J Norton <scott.norton@hp.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
- 15 Jan, 2014 12 commits
-
-
Bin Gao authored
On SoCs that have the calibration MSRs available, either there is no PIT, HPET or PMTIMER to calibrate against, or the PIT/HPET/PMTIMER is driven from the same clock as the TSC, so calibration is redundant and just slows down the boot. TSC rate is caculated by this formula: <maximum core-clock to bus-clock ratio> * <maximum resolved frequency> The ratio and the resolved frequency ID can be obtained from MSR. See Intel 64 and IA-32 System Programming Guid section 16.12 and 30.11.5 for details. Signed-off-by:
Bin Gao <bin.gao@intel.com> Signed-off-by:
-
Prarit Bhargava authored
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=64791 When a cpu is downed on a system, the irqs on the cpu are assigned to other cpus. It is possible, however, that when a cpu is downed there aren't enough free vectors on the remaining cpus to account for the vectors from the cpu that is being downed. This results in an interesting "overflow" condition where irqs are "assigned" to a CPU but are not handled. For example, when downing cpus on a 1-64 logical processor system: <snip> [ 232.021745] smpboot: CPU 61 is now offline [ 238.480275] smpboot: CPU 62 is now offline [ 245.991080] ------------[ cut here ]------------ [ 245.996270] WARNING: CPU: 0 PID: 0 at net/sched/sch_generic.c:264 dev_watchdog+0x246/0x250() [ 246.005688] NETDEV WATCHDOG: p786p1 (ixgbe): transmit queue 0 timed out [ 246.013070] Modules linked in: lockd sunrpc iTCO_wdt iTCO_vendor_support sb_edac ixgbe microcode e1000e pcspkr joydev edac_core lpc_ich ioatdma ptp mdio mfd_core i2c_i801 dca pps_core i2c_core wmi acpi_cpufreq isci libsas scsi_transport_sas [ 246.037633] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.12.0+ #14 [ 246.044451] Hardware name: Intel Corporation S4600LH ........../SVRBD-ROW_T, BIOS SE5C600.86B.01.08.0003.022620131521 02/26/2013 [ 246.057371] 0000000000000009 ffff88081fa03d40 ffffffff8164fbf6 ffff88081fa0ee48 [ 246.065728] ffff88081fa03d90 ffff88081fa03d80 ffffffff81054ecc ffff88081fa13040 [ 246.074073] 0000000000000000 ffff88200cce0000 0000000000000040 0000000000000000 [ 246.082430] Call Trace: [ 246.085174] <IRQ> [<ffffffff8164fbf6>] dump_stack+0x46/0x58 [ 246.091633] [<ffffffff81054ecc>] warn_slowpath_common+0x8c/0xc0 [ 246.098352] [<ffffffff81054fb6>] warn_slowpath_fmt+0x46/0x50 [ 246.104786] [<ffffffff815710d6>] dev_watchdog+0x246/0x250 [ 246.110923] [<ffffffff81570e90>] ? dev_deactivate_queue.constprop.31+0x80/0x80 [ 246.119097] [<ffffffff8106092a>] call_timer_fn+0x3a/0x110 [ 246.125224] [<ffffffff8106280f>] ? update_process_times+0x6f/0x80 [ 246.132137] [<ffffffff81570e90>] ? dev_deactivate_queue.constprop.31+0x80/0x80 [ 246.140308] [<ffffffff81061db0>] run_timer_softirq+0x1f0/0x2a0 [ 246.146933] [<ffffffff81059a80>] __do_softirq+0xe0/0x220 [ 246.152976] [<ffffffff8165fedc>] call_softirq+0x1c/0x30 [ 246.158920] [<ffffffff810045f5>] do_softirq+0x55/0x90 [ 246.164670] [<ffffffff81059d35>] irq_exit+0xa5/0xb0 [ 246.170227] [<ffffffff8166062a>] smp_apic_timer_interrupt+0x4a/0x60 [ 246.177324] [<ffffffff8165f40a>] apic_timer_interrupt+0x6a/0x70 [ 246.184041] <EOI> [<ffffffff81505a1b>] ? cpuidle_enter_state+0x5b/0xe0 [ 246.191559] [<ffffffff81505a17>] ? cpuidle_enter_state+0x57/0xe0 [ 246.198374] [<ffffffff81505b5d>] cpuidle_idle_call+0xbd/0x200 [ 246.204900] [<ffffffff8100b7ae>] arch_cpu_idle+0xe/0x30 [ 246.210846] [<ffffffff810a47b0>] cpu_startup_entry+0xd0/0x250 [ 246.217371] [<ffffffff81646b47>] rest_init+0x77/0x80 [ 246.223028] [<ffffffff81d09e8e>] start_kernel+0x3ee/0x3fb [ 246.229165] [<ffffffff81d0989f>] ? repair_env_string+0x5e/0x5e [ 246.235787] [<ffffffff81d095a5>] x86_64_start_reservations+0x2a/0x2c [ 246.242990] [<ffffffff81d0969f>] x86_64_start_kernel+0xf8/0xfc [ 246.249610] ---[ end trace fb74fdef54d79039 ]--- [ 246.254807] ixgbe 0000:c2:00.0 p786p1: initiating reset due to tx timeout [ 246.262489] ixgbe 0000:c2:00.0 p786p1: Reset adapter Last login: Mon Nov 11 08:35:14 from 10.18.17.119 [root@(none) ~]# [ 246.792676] ixgbe 0000:c2:00.0 p786p1: detected SFP+: 5 [ 249.231598] ixgbe 0000:c2:00.0 p786p1: NIC Link is Up 10 Gbps, Flow Control: RX/TX [ 246.792676] ixgbe 0000:c2:00.0 p786p1: detected SFP+: 5 [ 249.231598] ixgbe 0000:c2:00.0 p786p1: NIC Link is Up 10 Gbps, Flow Control: RX/TX (last lines keep repeating. ixgbe driver is dead until module reload.) If the downed cpu has more vectors than are free on the remaining cpus on the system, it is possible that some vectors are "orphaned" even though they are assigned to a cpu. In this case, since the ixgbe driver had a watchdog, the watchdog fired and notified that something was wrong. This patch adds a function, check_vectors(), to compare the number of vectors on the CPU going down and compares it to the number of vectors available on the system. If there aren't enough vectors for the CPU to go down, an error is returned and propogated back to userspace. v2: Do not need to look at percpu irqs v3: Need to check affinity to prevent counting of MSIs in IOAPIC Lowest Priority Mode v4: Additional changes suggested by Gong Chen. v5/v6/v7/v8: Updated comment text Signed-off-by:
Prarit Bhargava <prarit@redhat.com> Link: http://lkml.kernel.org/r/1389613861-3853-1-git-send-email-prarit@redhat.com Reviewed-by:
Gong Chen <gong.chen@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Michel Lespinasse <walken@google.com> Cc: Seiji Aguchi <seiji.aguchi@hds.com> Cc: Yang Zhang <yang.z.zhang@Intel.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Janet Morgan <janet.morgan@intel.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Ruiv Wang <ruiv.wang@gmail.com> Cc: Gong Chen <gong.chen@linux.intel.com> Signed-off-by:
-
Eric Dumazet authored
At first Jakub Zawadzki noticed that some divisions by reciprocal_divide were not correct. (off by one in some cases) http://www.wireshark.org/~darkjames/reciprocal-buggy.c He could also show this with BPF: http://www.wireshark.org/~darkjames/set-and-dump-filter-k-bug.c The reciprocal divide in linux kernel is not generic enough, lets remove its use in BPF, as it is not worth the pain with current cpus. Signed-off-by:
Jakub Zawadzki <darkjames-ws@darkjames.pl> Cc: Mircea Gherzan <mgherzan@gmail.com> Cc: Daniel Borkmann <dxchgb@gmail.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Matt Evans <matt@ozlabs.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by:
-
David Cohen authored
We want to support all Intel MID (Mobile Internet Device) platforms with a single config selection. This patch removes deprecated CONFIG_X86_MDFLD and X86_WANT_INTEL_MID options in favor of having CONFIG_X86_INTEL_MID only. Signed-off-by:
-
David Cohen authored
This code was partially based on Mark Brown's previous work. Signed-off-by:
Fei Yang <fei.yang@intel.com> Cc: Mark F. Brown <mark.f.brown@intel.com> Cc: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by:
-
Kuppuswamy Sathyanarayanan authored
This patch adds Clovertrail support on intel-mid and makes it more flexible to support other SoCs. Signed-off-by:
Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by:
-
David Cohen authored
In order make the driver more portable and support other Intel MID (Mobile Internet Device) platforms we need to move Medfield code from intel-mid.c core to its own mfld.c file. This patch contains no functional changes. Signed-off-by:
-
H. Peter Anvin authored
Make disabled_cpu_apicid static and read_mostly, and fix a couple of typos. Reported-by:
-
HATAYAMA Daisuke authored
Add disable_cpu_apicid kernel parameter. To use this kernel parameter, specify an initial APIC ID of the corresponding CPU you want to disable. This is mostly used for the kdump 2nd kernel to disable BSP to wake up multiple CPUs without causing system reset or hang due to sending INIT from AP to BSP. Kdump users first figure out initial APIC ID of the BSP, CPU0 in the 1st kernel, for example from /proc/cpuinfo and then set up this kernel parameter for the 2nd kernel using the obtained APIC ID. However, doing this procedure at each boot time manually is awkward, which should be automatically done by user-land service scripts, for example, kexec-tools on fedora/RHEL distributions. This design is more flexible than disabling BSP in kernel boot time automatically in that in kernel boot time we have no choice but referring to ACPI/MP table to obtain initial APIC ID for BSP, meaning that the method is not applicable to the systems without such BIOS tables. One assumption behind this design is that users get initial APIC ID of the BSP in still healthy state and so BSP is uniquely kept in CPU0. Thus, through the kernel parameter, only one initial APIC ID can be specified. In a comparison with disabled_cpu_apicid, we use read_apic_id(), not boot_cpu_physical_apicid, because on some platforms, the variable is modified to the apicid reported as BSP through MP table and this function is executed with the temporarily modified boot_cpu_physical_apicid. As a result, disabled_cpu_apicid kernel parameter doesn't work well for apicids of APs. Fixing the wrong handling of boot_cpu_physical_apicid requires some reviews and tests beyond some platforms and it could take some time. The fix here is a kind of workaround to focus on the main topic of this patch. Signed-off-by:
HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Link: http://lkml.kernel.org/r/20140115064458.1545.38775.stgit@localhost6.localdomain6 Signed-off-by:
H. Peter Anvin <hpa@zytor.com>
-
Sachin Kamat authored
gpio-samsung.h header file introduced by commit 93177be0910c ("ARM: S3C[24|64]xx: move includes back under <mach/> scope") is required only by S3C[24|64]xx machines. Include them conditionally to avoid the following build errors for other machine configurations. drivers/gpio/gpio-samsung.c:35:31: fatal error: mach/gpio-samsung.h: No such file or directory arch/arm/plat-samsung/pm-gpio.c:22:31: fatal error: mach/gpio-samsung.h: No such file or directory Signed-off-by:Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by:
-
Andrew Jones authored
Commit e66d2ae7 moved the assignment vcpu->arch.apic_base = value above a condition with (vcpu->arch.apic_base ^ value), causing that check to always fail. Use old_value, vcpu->arch.apic_base's old value, in the condition instead. Signed-off-by:
Andrew Jones <drjones@redhat.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Borislav Petkov authored
Having u32 and struct cpuinfo_x86 * by the same name is not very smart, although it was ok in this case due to the limited scope of u32 c and it being used only once in there. Fix this. Signed-off-by:
Borislav Petkov <bp@suse.de> Link: http://lkml.kernel.org/r/1389786735-16751-1-git-send-email-bp@alien8.de Signed-off-by:
-
