1. 25 Oct, 2016 40 commits
    • Charlie Jacobsen's avatar
      Starting code for IPC registers and access. · e51d81aa
      Charlie Jacobsen authored
      Set up new header files, under include/lcd-domains/
      -- lcd-domains.h: main include, contains struct lcd
      -- ipc.h: struct lcd_ipc_regs, for message registers
      
      Updated virt/lcd/lcd-domains.c to use new headers.
      
      Updated arch-dep code to use new struct lcd_ipc_regs.
      struct lcd_arch contains a pointer to the allocated
      page for stack / ipc registers. struct lcd (arch-indep)
      contains a pointer to the same memory (so that the
      arch-indep code can access the ipc regs directly if
      it wishes).
      
      Message registers should be accessed through arch-dep
      macros (to be implemented next) for portability and
      speed (some of the message registers will be
      implemented using machine regs, so the message registers
      in struct lcd_ipc_regs are `shadows').
      
      Message register design based on seL4. See seL4 manual,
      4.1.
      e51d81aa
    • Charlie Jacobsen's avatar
      Export lcd_arch_ept_map_gpa_to_hpa. · 166dcf09
      Charlie Jacobsen authored
      166dcf09
    • Charlie Jacobsen's avatar
      Simple stack initialization code (untested). · 93be900b
      Charlie Jacobsen authored
      Stack / ipc registers buffer initialized and mapped
      in guest physical.
      93be900b
    • Charlie Jacobsen's avatar
      Added GDT and TSS guest physical mapping code (untested). · 543ccab0
      Charlie Jacobsen authored
      lcd_arch_ept_map_gpa_to_hpa
      -- simple routine combining effects of ept walk and set
      -- part of arch-dep public interface
      
      Added mapping code to gdt init and tss init, and some
      documentation for those routines.
      
      Starting code for stack initialization (should be
      simple).
      543ccab0
    • Charlie Jacobsen's avatar
      GDT initialization code in place, and desc init code (untested). · fa0097b0
      Charlie Jacobsen authored
      vmx_pack_desc
      -- load base, limit, type, etc. into a segment descriptor
      
      vmx_init_gdt
      -- loads base, limit, etc. for code, data, and tss segment
         descriptors in gdt
      fa0097b0
    • Charlie Jacobsen's avatar
      Segment and desc table regs, address space layout in place (untested). · c4780c3c
      Charlie Jacobsen authored
      Address space layout includes tss, gdt, ipc registers, and small
      stack. See lcd-domains-arch.h.
      -- a tss may be required (not sure) while running in non-root,
         even though a stack switch does not occur
      -- a gdt may also be required (even though all info is written in
         the hidden part of the segment registers); again, not sure
      
      4 KBs is reserved for an IDT if it is needed (not mapped or
      allocated).
      
      GDT layout given in lcd-domains-arch.h. (GDT build code to
      be implemented / copied over next.)
      
      LDT is not used (so no need to load access rights, etc.). It
      is marked as unusable.
      
      Fixed segment register limit fields. These must be 32 bits and
      are always byte granularity. The granularity field in the
      access rights bits is confusing (see Intel SDM V3 26.3.1.2).
      c4780c3c
    • Charlie Jacobsen's avatar
      EPT deallocation code in place (untested). · c9cb61a2
      Charlie Jacobsen authored
      vmx_free_ept
      -- frees all memory associated with extended
         page tables (paging structures and mapped
         physical mem)
      
      vmx_free_ept_dir_level
      -- frees all memory associated with an epte
         at a level in the hierarchy
      -- uses shallow recursion to make the code
         more readable
      
      Simple updates to some of the EPT macros.
      c9cb61a2
    • Charlie Jacobsen's avatar
      Finished arch-dep ept code. · 8f65d678
      Charlie Jacobsen authored
      lcd_arch_epte_t type for arch abstraction.
      
      lcd_arch_ept_walk
      -- simple lookup of ept entry
      -- optionally allocate ept data structures
         along the way
      
      lcd_arch_ept_set
      -- set the host physical address in the
         (final level) ept entry, along with
         default flags
      
      lcd_arch_ept_hpa
      -- returns host physical address stored in
         an ept entry
      
      Remaining old code will be put in arch-indep
      code.
      8f65d678
    • Charlie Jacobsen's avatar
    • Charlie Jacobsen's avatar
      Loads / stores to cr3 now handled (untested). · 40de4ae2
      Charlie Jacobsen authored
      This is necessary for e.g. the emulab machines (loads /
      stores to cr3 are not allowed in non-root, so must be
      handled by hypervisor). Code simply copies values between
      fields in lcd data structure.
      40de4ae2
    • Charlie Jacobsen's avatar
      Simple EPT fault handling code in place (untested). · c37435a0
      Charlie Jacobsen authored
      Removed the `auto' memory alloc and map from the
      original handler. The new handler is simple for now;
      it just reads the guest virtual and physical addresses
      involved in the fault. The arch-indepent code will be
      responsible for deciding what to do.
      c37435a0
    • Charlie Jacobsen's avatar
      External interrupt code in place (untested). · 1abf5ea6
      Charlie Jacobsen authored
      vmx_handle_external_intr
      -- pretty much a straight copy over of the old code,
         but with comments
      -- one big difference: interrupts are assumed to be
         enabled when this routine is called (I can't see
         how kvm is allowing the handling of external interrupts
         because it disables them when it enters vmx non-root.
         See the kvm code in x86.c:vcpu_enter_guest.)
      1abf5ea6
    • Charlie Jacobsen's avatar
      Set up simple lcd run (no loop) and some handling (untested). · 070e2688
      Charlie Jacobsen authored
      lcd_arch_run:
      -- disables kernel preemption while lcd is running
      -- simple switch on vmx exit conditions
      
      vmx_handle_exception_nmi
      -- for nmi's and exceptions generated by lcd
      
      vmx_handle_hard_exception
      -- for `hardware exceptions': page faults, traps,
         machine checks
      070e2688
    • Charlie Jacobsen's avatar
      bb26f965
    • Charlie Jacobsen's avatar
      Updated kconfig files. · dee9b495
      Charlie Jacobsen authored
      -- LCD_VMX_INTEL => LCD_INTEL
      -- Moved LCD_INTEL config to arch/x86/Kconfig
      dee9b495
    • Charlie Jacobsen's avatar
      Simple re-naming to arch-agnostic names for arch-dep interface. · c8a88195
      Charlie Jacobsen authored
      -- Moved some vmx-specific data structures into implementation file.
      -- lcd_vmx_* => lcd_arch_*
      -- updated virt/lcd/lcd-domains.c
      c8a88195
    • Charlie Jacobsen's avatar
      a46b6017
    • Charlie Jacobsen's avatar
      c2d928c2
    • Charlie Jacobsen's avatar
    • Charlie Jacobsen's avatar
      Added low level vmx launch / resume code. · d90c0cac
      Charlie Jacobsen authored
      Pretty much straight copy over of lcd_run => vmx_enter.
      More comments. Removed re-load of user %ds and %es since
      we are running in 64-bit.
      d90c0cac
    • Charlie Jacobsen's avatar
      Added header doc to lcd-vmx.h and lcd_vmx_destroy. · 4cdb5e83
      Charlie Jacobsen authored
      lcd_destroy => lcd_vmx_destroy. Pretty much a straight
      copy over, but removed some unneeded code.
      4cdb5e83
    • Charles Jacobsen's avatar
      Fixed vmcs configuration bugs (small macro bugs in vmx.h). · aad218b5
      Charles Jacobsen authored
      Debug controls macros for vm exit and vm entry were
      wrong (I wonder if the kvm guys know, it's in the stable
      linux build).
      
      I had to enable exiting on load / save to %cr3 for it
      to run on emulab machines.
      
      Tweaked vmx control debugging code, cleaned up
      logic in adjust_vmx_controls, much simpler.
      aad218b5
    • Charles Jacobsen's avatar
      Added vmx configuration debugging. · 8c3624a5
      Charles Jacobsen authored
      -- vmx_print_controls
      -- updated setup_vmcs_config to use it
      8c3624a5
    • Charles Jacobsen's avatar
      Fixed bugs in lcd_vmx_create and dependencies. Clean build. · 4d27a893
      Charles Jacobsen authored
      Conditional compilation on number of autoload msr's.
      
      Untested.
      4d27a893
    • Charlie Jacobsen's avatar
      Added vmcs read / write routines. · 0de48e3b
      Charlie Jacobsen authored
      Straight copy over from old code.
      0de48e3b
    • Charlie Jacobsen's avatar
    • Charlie Jacobsen's avatar
      Finished lcd_vmx_create and its dependencies (untested). · 7607ec9a
      Charlie Jacobsen authored
      vmx_setup_vmcs ==> vmx_setup_vmcs_guest_settings and
      vmx_setup_vmcs_host.
      
      vmx_setup_vmcs_guest_settings
      -- execution control (e.g., interrupt handling)
      -- ept pointer
      -- %cr0 and %cr4 access control
      
      vmx_setup_vmcs_guest_regs
      -- initial %cr0, %cr4
      -- segmentation--bases, limits, selectors
      -- guest EFER (long mode enabled, no syscall/sysret)
      -- initial activity and interrupt state
      
      vmx_setup_vmcs_host
      -- control and segmentation regs
      -- host EFER
      -- no saving of syscall/sysret msrs since these are
         disabled in guest
      -- no page attribute table
      7607ec9a
    • Charlie Jacobsen's avatar
      About half way done with vmcs initialization code. · acbb9533
      Charlie Jacobsen authored
      lcd_create --> lcd_vmx_create, with a lot of code
      re-factored or removed for now, to keep it simple
      (no gdt, idt, isr, paging bitmap, address space
      init, etc.).
      -- basic ept initialization
      -- vmcs loading on a cpu
         -- re-factored __vmx_setup_cpu to use built-in
            segment descriptor access functions in desc.h
         -- removed host sys_enter storage, since this
            msr is disabled right now anyway
         -- more doc to understand vmcs load process
      acbb9533
    • Charles Jacobsen's avatar
      Finished tweaking build setup (will test modprobe next). · cfee63b6
      Charles Jacobsen authored
      Some simple renaming
      -- LCD => LCD_DOMAINS
      -- core.c => lcd-domains.c
      -- new LCD_VMX_INTEL configuration
      
      Adjusted virt/lcd/Kconfig to reflect LCD_DOMAINS dependency
      on LCD_VMX_INTEL.
      cfee63b6
    • Charles Jacobsen's avatar
      Successful build with lcd_vmx_init and lcd_vmx_exit. · 62e4ac37
      Charles Jacobsen authored
      Added straight copy from old code of lcd_vmx_exit.
      
      Shifted lcd_vmx_init and lcd_vmx_exit to
      arch/x86/include/asm/lcd-vmx.h. Ideally, if we want
      this to be arch-independent, probably want to change
      header to asm/lcd.h, and routines to lcd_arch_init
      and lcd_arch_exit, or something similar.
      62e4ac37
    • Charles Jacobsen's avatar
      Fixed build system for lcd, and most compiler errors. · 7c05c7a0
      Charles Jacobsen authored
      Two components to the lcd build now:
      -- arch/x86/lcd/Makefile: for building x86 lcd code
      -- virt/lcd/Makefile: for building arch-indep lcd code
      
      Modified the build system just slightly for a cleaner
      build:
      -- virt/ directory treated like ipc/, usr/, etc. directories
      -- added Kconfig and Makefile to virt/, mirroring drivers/
      -- updated top-level Makefile to include virt/ as vmlinux
         directory / dependency, so build system will recur into
         virt/
      -- updated arch/x86/Kconfig to include virt/Kconfig, so it
         will be included as a menu item
      -- updated arch/x86/Kbuild to include arch/x86/lcd/
      
      Removed old capabilities code in cap/.
      
      Removed lcd syscall.
      
      Temporarily turned off build for drivers/lcd.
      
      Fixed most bugs in lcd-vmx (still need to do lcd_vmx_exit).
      -- minor naming issues in lcd-vmx.h
      -- straight copy over of vmx_disable_intercepts_for_msr,
         but with more doc
      -- removed VMX_EPT_INDIVIDUAL_ADDR macro from vmx.h (where
         did this come from? it's not documented in the intel manual,
         nor is it used in kvm)
      7c05c7a0
    • Charlie Jacobsen's avatar
      Tweaking the build set up. · 70f48063
      Charlie Jacobsen authored
      The main makefile will now go in virt/lcd. The
      lcd-vmx.h header will be in the standard include
      path, and I can reference the x86-dependent code
      from there, so it should all just work (build not
      tested yet, will do so soon).
      
      Small change to lcd-vmx.c: Made sure I freed
      msr bitmap page on failure.
      70f48063
    • Charlie Jacobsen's avatar
      Finished lcd_vmx_init and its dependencies. · 18122896
      Charlie Jacobsen authored
      Added a few missing macros to arch/x86/include/vmx.h,
      and RESERVED masks for easily determining which bits
      in a vmx control are reserved (needed in adjust_vmx_controls).
      
      Re-factored setup_vmcs_config and adjust_vmx_controls.
      setup_vmcs_config does pretty much the same thing, but it
      fails immediately if a control isn't available --
      adjust_vmx_controls confirms that the exact desired
      controls are available, and sets the reserved bits to
      1 or 0 as needed. Cleaner comments and organization.
      Re-factored the vmx basic settings to
      vmcs_config_basic_settings.
      
      Removed some of the vmx feature check code that was in
      the original lcd_vmx_init, as setup_vmcs_config now does
      that.
      
      Essentially a straight copy over of:
      
      -- __vmx_enable
      -- vmx_enable
      -- vmx_disable
      -- vmx_free_vmxon_areas
      -- __vmxon
      -- __vmxoff
      
      The only difference is I shifted tbl and cache
      invalidation to vmx_enable (originally in __vmx_enable)
      and added some comments.
      
      Straight copy over of
      -- vmx_alloc_vmcs
      -- vmx_free_vmcs
      -- invvpid, invept code, with slight renaming
      18122896
    • Charlie Jacobsen's avatar
      Starting a fresh lcd-vmx arch-dependent interface. · 8a6ad472
      Charlie Jacobsen authored
      Arch-dependent code will go in arch/x86/lcd, and the
      header(s) will reside in arch/x86/include/asm.
      
      For now, I have only moved some of the arch-dependent
      junk that was in include/lcd/lcd.h into
      arch/x86/include/asm/lcd-vmx.h.
      8a6ad472
    • Charlie Jacobsen's avatar
      Completed re-factoring of address space code (untested). · 922c8135
      Charlie Jacobsen authored
      Completed lcd_setup_addr_space (replaced
      vmx_create_initial_page_table). lcd_setup_addr_space
      allocates and maps the guest physical and virtual
      memory needed for the lcd when it first enters.
      
      The code should be easily extendable for a different
      address space layout. Guest virtual and ept mapping
      code is now fairly symmetric and easier to understand.
      
      Comment headers for ept and gva functions.
      
      Next up: seeing if I can build, and get it to run.
      Then I'll merge with the main branch (lcd).
      922c8135
    • Charlie Jacobsen's avatar
      Re-factored guest virtual address space setup code. · 2170318e
      Charlie Jacobsen authored
      A lot of changes here (:gulp:).
      
      ept_map_gpa_to_hva
      -- renamed to: lcd_ept_gpa_to_hva
      -- cleaned it up
      
      Bitmap no longer in lcd; declared as local var
      inside lcd_setup_guest_virtual.
      
      alloc_pt_item
      -- renamed / refactored to: lcd_gv_alloc_paging_mem_page
      -- new code allocs host physical page for paging mem,
         and allocates chunk of guest physical address space
         (by setting bit in bitmap, as before)
      
      map_gva_to_gpa
      -- renamed / refactored to: lcd_gv_walk
      -- break apart each level in guest virtual page
         walk into separate functions, to make it more
         readable
      -- serves purpose similar to lcd_ept_walk, but
         returns a pte in the guest virtual page table
      
      lcd_setup_guest_virtual
      -- takes care of guest virtual mapping that
         the old vmx_setup_initial_page_table did
      
      Code not tested or built yet.
      2170318e
    • Charlie Jacobsen's avatar
      Updated memory layout and re-factored addr space init. · 5270acc4
      Charlie Jacobsen authored
      New memory layout in lcd_defs.h, with macros.
      -- no idt, tss, or interrupt service routines
      
      Started re-factoring lcd address space initialization.
      vmx_setup_initial_page_table will soon be replaced by
      lcd_setup_addr_space.
      -- lcd_setup_initial_ept for alloc'ing and mapping
         host physical memory
      -- re-factored some of the ept code to make the interface
         cleaner
      -- need to think about locking the ept, where it should
         be done
      -- soon will have lcd_setup_initial_virt, or something
         similar, for initializing guest virtual page tables.
      
      Copied map_gva_to_gpa routine to new tools/lcd/liblcd/vm.c.
      This is where liblcd will go. liblcd will contain utilities
      an lcd can call.
      5270acc4
    • Anton Burtsev's avatar
      ioctl interface to LCD · 552bd976
      Anton Burtsev authored
      552bd976
    • Anton Burtsev's avatar
      Wasn't able to link a module due to a name collision · 6c0118e0
      Anton Burtsev authored
        - Renamed target lcd.ko to lcd-domains.ko
      6c0118e0
    • Anton Burtsev's avatar
      d242a850