1. 27 Nov, 2007 1 commit
  2. 19 Oct, 2007 5 commits
  3. 18 Oct, 2007 8 commits
  4. 16 Oct, 2007 4 commits
    • Bartlomiej Zolnierkiewicz's avatar
      ide: remove hwif->autodma and drive->autodma · 9ff6f72f
      Bartlomiej Zolnierkiewicz authored
      * hpt34x.c: disable DMA masks for HPT345
        (hwif->autodma is zero so DMA won't be enabled anyway).
      
      * trm290.c: disable IDE_HFLAG_TRUST_BIOS_FOR_DMA flag
        (hwif->autodma is zero so DMA won't be enabled anyway).
      
      * Check noautodma global variable instead of drive->autodma in ide_tune_dma().
      
        This fixes handling of "ide=nodma" kernel parameter for icside, ide-cris,
        au1xxx-ide, pmac, it821x, jmicron, sgiioc4 and siimage host drivers.
      
      * Remove hwif->autodma (it was not checked by IDE core code anyway) and
        drive->autodma (was set by all host drivers - except HPT345/TRM290 special
        cases - unless "ide=nodma" was used).
      
      While at it:
      - remove needless printk() from icside.c
      - remove stale FIXME/comment from ide-probe.c
      - don't force DMA off if PCI bus-mastering had to be enabled in setup-pci.c
        (this setting was always later over-ridden by host drivers anyway)
      Signed-off-by: default avatarBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
      9ff6f72f
    • Bartlomiej Zolnierkiewicz's avatar
      ide: use PCI_VDEVICE() macro · 9cbcc5e3
      Bartlomiej Zolnierkiewicz authored
      While at it:
      - make struct pci_device_id tables const
      - use PCI_DEVICE_ID_ITE_8213 define in it8213.c
      - fix comment in generic.c
      Signed-off-by: default avatarBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
      9cbcc5e3
    • Bartlomiej Zolnierkiewicz's avatar
      ide: remove ->ide_dma_check (take 2) · 0ae2e178
      Bartlomiej Zolnierkiewicz authored
      * Add IDE_HFLAG_TRUST_BIOS_FOR_DMA host flag for host drivers that depend
        on BIOS for programming device/controller for DMA.  Set it in cy82c693,
        generic, ns87415, opti621 and trm290 host drivers.
      
      * Add IDE_HFLAG_VDMA host flag for host drivers using VDMA.  Set it in cs5520
        host driver.
      
      * Teach ide_tune_dma() about IDE_HFLAG_TRUST_BIOS_FOR_DMA flag.
      
      * Add generic ide_dma_check() helper and remove all open coded ->ide_dma_check
        implementations.  Fix all places checking for presence of ->ide_dma_check
        hook to check for ->ide_dma_on instead.
      
      * Remove no longer needed code from config_drive_for_dma().
      
      * Make ide_tune_dma() static.
      
      v2:
      * Fix config_drive_for_dma() return values.
      
      * Fix ide-dma.c build for CONFIG_BLK_DEV_IDEDMA_PCI=n by adding
        dummy config_drive_for_dma() inline.
      
      * Fix IDE_HFLAG_TRUST_BIOS_FOR_DMA handling in ide_dma_check().
      
      * Fix init_hwif_it8213() comment.
      
      There should be no functionality changes caused by this patch.
      
      Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
      Signed-off-by: default avatarBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
      0ae2e178
    • Bartlomiej Zolnierkiewicz's avatar
      ide: remove ide_use_fast_pio() · 65c9cd23
      Bartlomiej Zolnierkiewicz authored
      Remove ide_use_fast_pio() and just re-tune PIO unconditionally if DMA tuning
      has failed in ->ide_dma_check.  All host drivers using ide_use_fast_pio() set
      drive->autotune so PIO is always tuned anyway and in some cases we _really_
      need to re-tune PIO because PIO and DMA timings are shared.
      Acked-by: default avatarSergei Shtylyov <sshtylyov@ru.mvista.com>
      Signed-off-by: default avatarBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
      65c9cd23
  5. 13 Oct, 2007 1 commit
    • Bartlomiej Zolnierkiewicz's avatar
      ide: move ide_config_drive_speed() calls to upper layers (take 2) · 88b2b32b
      Bartlomiej Zolnierkiewicz authored
      * Convert {ide_hwif_t,ide_pci_device_t}->host_flag to be u16.
      
      * Add IDE_HFLAG_POST_SET_MODE host flag to indicate the need to program 
        the host for the transfer mode after programming the device.  Set it
        in au1xxx-ide, amd74xx, cs5530, cs5535, pdc202xx_new, sc1200, pmac
        and via82cxxx host drivers.
      
      * Add IDE_HFLAG_NO_SET_MODE host flag to indicate the need to completely
        skip programming of host/device for the transfer mode ("smart" hosts).
        Set it in it821x host driver and check it in ide_tune_dma().
      
      * Add ide_set_pio_mode()/ide_set_dma_mode() helpers and convert all
        direct ->set_pio_mode/->speedproc users to use these helpers.
      
      * Move ide_config_drive_speed() calls from ->set_pio_mode/->speedproc
        methods to callers.
      
      * Rename ->speedproc method to ->set_dma_mode, make it void and update
        all implementations accordingly.
      
      * Update ide_set_xfer_rate() comments.
      
      * Unexport ide_config_drive_speed().
      
      v2:
      * Fix issues noticed by Sergei:
        - export ide_set_dma_mode() instead of moving ->set_pio_mode abuse wrt
          to setting DMA modes from sc1200_set_pio_mode() to do_special()
        - check IDE_HFLAG_NO_SET_MODE in ide_tune_dma()
        - check for (hwif->set_pio_mode) == NULL in ide_set_pio_mode()
        - check for (hwif->set_dma_mode) == NULL in ide_set_dma_mode()
        - return -1 from ide_set_{pio,dma}_mode() if ->set_{pio,dma}_mode == NULL
        - don't set ->set_{pio,dma}_mode on it821x in "smart" mode
        - fix build problem in pmac.c
        - minor fixes in au1xxx-ide.c/cs5530.c/siimage.c
        - improve patch description
      
      Changes in behavior caused by this patch:
      - HDIO_SET_PIO_MODE ioctl would now return -ENOSYS for attempts to change
        PIO mode if it821x controller is in "smart" mode
      - removal of two debugging printk-s (from cs5530.c and sc1200.c)
      - transfer modes 0x00-0x07 passed from user space may be programmed twice on
        the device (not really an issue since 0x00 is not supported correctly by
        any host driver ATM, 0x01 is not supported at all and 0x02-0x07 are invalid)
      Acked-by: default avatarSergei Shtylyov <sshtylyov@ru.mvista.com>
      Signed-off-by: default avatarBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
      88b2b32b
  6. 11 Oct, 2007 4 commits
  7. 19 Jul, 2007 4 commits
  8. 09 Jul, 2007 1 commit
    • Bartlomiej Zolnierkiewicz's avatar
      ide: add short cables support · 49521f97
      Bartlomiej Zolnierkiewicz authored
      This patch allows users to override both host and device side cable detection
      with "ideX=ata66" kernel parameter.  Thanks to this it should be now possible
      to use UDMA > 2 modes on systems (laptops mainly) which use short 40-pin cable
      instead of 80-pin one.
      
      Next patches add automatic detection of some systems using short cables.
      
      Changes:
      
      * Rename hwif->udma_four to hwif->cbl and make it u8.
      
      * Convert all existing users accordingly (use ATA_CBL_* defines while at it).  
      
      * Add ATA_CBL_PATA40_SHORT support to ide-iops.c:eighty_ninty_three().
      
      * Use ATA_CBL_PATA40_SHORT for "ideX=ata66" kernel parameter.
      Signed-off-by: default avatarBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
      Reviewed-by: default avatarSergei Shtylyov <sshtylyov@ru.mvista.com>
      49521f97
  9. 15 May, 2007 1 commit
  10. 09 May, 2007 2 commits
    • Bartlomiej Zolnierkiewicz's avatar
      ide: rework the code for selecting the best DMA transfer mode (v3) · 2d5eaa6d
      Bartlomiej Zolnierkiewicz authored
      Depends on the "ide: fix UDMA/MWDMA/SWDMA masks" patch.
      
      * add ide_hwif_t.udma_filter hook for filtering UDMA mask
        (use it in alim15x3, hpt366, siimage and serverworks drivers)
      * add ide_max_dma_mode() for finding best DMA mode for the device
        (loosely based on some older libata-core.c code)
      * convert ide_dma_speed() users to use ide_max_dma_mode()
      * make ide_rate_filter() take "ide_drive_t *drive" as an argument instead
        of "u8 mode" and teach it to how to use UDMA mask to do filtering
      * use ide_rate_filter() in hpt366 driver
      * remove no longer needed ide_dma_speed() and *_ratemask()
      * unexport eighty_ninty_three()
      
      v2:
      * rename ->filter_udma_mask to ->udma_filter
        [ Suggested by Sergei Shtylyov <sshtylyov@ru.mvista.com>. ]
      
      v3:
      * updated for scc_pata driver (fixes XFER_UDMA_6 filtering for user-space
        originated transfer mode change requests when 100MHz clock is used)
      Signed-off-by: default avatarBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
      2d5eaa6d
    • Michael Opdenacker's avatar
      59c51591
  11. 05 May, 2007 1 commit
    • Bartlomiej Zolnierkiewicz's avatar
      siimage: fix wrong ->swdma_mask · 8e60d376
      Bartlomiej Zolnierkiewicz authored
      This driver doesn't support SWDMA so use the correct ->swdma_mask.
      
      While at it:
      
      * no need to call config_chipset_for_pio() in config_chipset_for_dma(),
        if DMA is not available config_chipset_for_pio() will be called
        by siimage_config_drive_for_dma() and if DMA is available
        config_siimage_chipset_for_pio() will be called by siimage_tune_chipset()
      
      * remove needless config_chipset_for_pio() wrapper
      
      * bump driver version
      Signed-off-by: default avatarBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
      8e60d376
  12. 03 Mar, 2007 1 commit
  13. 16 Feb, 2007 7 commits