1. 11 Oct, 2007 12 commits
    • Bartlomiej Zolnierkiewicz's avatar
      ide: Kconfig face-lift · 842c19ad
      Bartlomiej Zolnierkiewicz authored
      * Convert config options for PCI host drivers to select BLK_DEV_IDEPCI.
      
      * Same for BLK_DEV_IDEDMA_PCI and PCI DMA host drivers, also make this
        config option select BLK_DEV_IDEPCI.
      
      * Remove no longer needed help for BLK_DEV_IDEPCI and BLK_DEV_IDEDMA_PCI.
      
      * Remove redundant IDE_CHIPSETS config option.
      
      As a result of this patch users have now three less config options
      to worry about and can just select host drivers that they need
      (IDE config menu is "flatter").
      Signed-off-by: default avatarBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
      842c19ad
    • Bartlomiej Zolnierkiewicz's avatar
      ide: move ide_rate_filter() calls to the upper layer (take 2) · f212ff28
      Bartlomiej Zolnierkiewicz authored
      * Move ide_rate_filter() calls from host drivers to IDE core.
      
      * Make ide_rate_filter() static.
      
      * Make 'speed' argument of ->speedproc const.
      
      v2:
      * Fix it8213_tune_chipset() comment.
      
      There should be no functionality changes caused by this patch.
      Acked-by: default avatarSergei Shtylyov <sshtylyov@ru.mvista.com>
      Signed-off-by: default avatarBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
      f212ff28
    • Bartlomiej Zolnierkiewicz's avatar
      sis5513: add ->udma_filter method for chipset_family >= ATA_133 · 3160d541
      Bartlomiej Zolnierkiewicz authored
      * Add sis5513_ata133_udma_filter() for chipset_family >= ATA_133,
        use it to filter UDMA6 mode if ATA133 bit is disabled.
      
      * Remove no longer needed UDMA6 limiting logic from sis5513_tune_chipset().
      
      * Bump driver version.
      
      There should be no functionality changes caused by this patch.
      Acked-by: default avatarSergei Shtylyov <sshtylyov@ru.mvista.com>
      Signed-off-by: default avatarBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
      3160d541
    • Bartlomiej Zolnierkiewicz's avatar
      ide: mode limiting fixes for user requested speed changes · 7670df73
      Bartlomiej Zolnierkiewicz authored
      * Add an extra argument to ide_max_dma_mode() for passing requested transfer
        mode.  Use it as an upper limit when finding the best DMA for device/host.
      
      * Rename ide_max_dma_mode() to ide_find_dma_mode() and at the same time add
        ide_max_dma_mode() wrapper which passes XFER_UDMA_6 as a requested mode to
        ide_find_dma_mode().  Also add inline ide_find_dma_mode() version for
        CONFIG_BLK_DEV_IDEDMA=n case.
      
      * Pass requested transfer mode from ide_find_dma_mode() to ide_get_mode_mask()
        to avoid false warning from eighty_ninty_three().
      
      * Use ide_find_dma_mode() to limit the user requested transfer mode in
        ide_rate_filter().  Also limit the requested mode by host max PIO mode.
      
      
      Above changes make ide_rate_filter() to:
      
      * Clip desired transfer mode down if it is invalid (values 0x0F, 0x13-0x19
        and 0x25-0x39, values > 0x46 were already clipped down, same for values
        0x25-0x39 but iff UDMA was not supported by the host).
      
      * Clip desired transfer mode down if it is currently unsupported by IDE core
        (PIO6 and MWDMA3-4, the latter were already clipped down but iff UDMA was
        not supported by the host).
      
      * Clip desired transfer mode down according to the host capabilities
        (UDMA modes were already clipped down but MWDMA/SWDMA/PIO weren't,
        also ->atapi_dma flag was not respected).
      
      * Clip desired transfer mode down according to the device capabilities
        (except PIO modes for now which require mode work) - shouldn't be a
        problem since ide_set_xfer_rate() is called _after_ device has accepted
        given transfer mode.
      
      and also result in a number of host driver specific bugfixes:
      
      * icside
        - clip unsupported PIO5 mode down
        - fix unsupported/invalid modes being set in drive->current_speed
      
      * ide-cris
        - clip unsupported PIO5 and SWDMA0-2 modes down
        - clip DMA modes down for ATAPI devices
        - fix BUG() on unsupported/invalid modes
      
      * au1xxx-ide
        - clip unsupported PIO5, SWDMA0-2 and MWDMA0-2
          (if BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA=n) modes down
      
      * aec62xx
        - clip unsupported PIO5 and SWDMA0-2 modes down
        - clip DMA modes down for ATAPI devices
        - fix 0x00 being programmed as PIO timing for unsupported/invalid modes
        - fix unsupported/invalid modes being set on the device
      
      * alim15x3
        - clip DMA modes down for ATAPI devices (chipset revision == 0x20 only)
        - fix theoretical OOPS for 0x0F mode
        - fix unsupported/invalid modes being set on the device
      
      * amd74xx
        - clip unsupported SWDMA0-2 (on COBRA_7401 revs <= 7) modes down
        - fix random PIO timings being set for unsupported/invalid modes
        - fix unsupported/invalid modes being set on the device
      
      * atiixp
        - clip unsupported PIO5 and SWDMA0-2 modes down
        - fix cached MWDMA mode being cleared for unsupported/invalid modes
        - fix PIO{0,2} timings being programmed for unsupported/invalid modes
        - fix theoretical OOPS for PIO5-6 and 0x0F modes
        - fix unsupported/invalid modes being set on the device
      
      * cmd64x
        - clip unsupported SWDMA0-2 modes down
      
      * cs5530
        - clip unsupported PIO5 and SWDMA0-2 modes down
        - fix unsupported/invalid modes being set on the device
        - fix BUG() on unsupported/invalid modes
          (which happened if the device accepted the setting)
      
      * cs5535
        - clip unsupported PIO5 and SWDMA0-2 modes down
        - fix unsupported/invalid modes being set on the device
        - fix theoretical OOPS for PIO5-6 and 0x0F modes
      
      * hpt34x
        - clip DMA modes down for ATAPI devices
        - fix invalid timings being programmed for unsupported/invalid modes
        - fix unsupported/invalid modes being set on the device
      
      * hpt366
        - clip unsupported PIO5 and SWDMA0-2 modes down
        - fix PIO0 timings being programmed for unsupported/invalid modes
        - fix DMA timings being cleared for MWDMA3-4 and 0x25-0x39 modes
        - fix unsupported/invalid modes being set on the device
      
      * it8213
        - clip unsupported PIO5, SWDMA0-1 and MWDMA0 modes down
      
      * it821x
        - clip unsupported PIO5 and SWDMA0-2 modes down
        - clip DMA modes down for ATAPI devices
          (chipset in smart mode and revision 0x10 in pass-through mode)
      
      * jmicron
        - clip unsupported SWDMA0-2 modes down
        - fix unsupported/invalid modes being set on the device
      
      * pdc202xx_new
        - clip unsupported PIO5 and SWDMA0-2 modes down
        - fix unsupported/invalid modes being set on the device
      
      * pdc202xx_old
        - clip unsupported PIO5 mode down
        - fix incorrect timings being set for unsupported/invalid modes
        - fix unsupported/invalid modes being set on the device
      
      * piix
        - clip unsupported PIO5, SWDMA0-1 and MWDMA0 modes down
      
      * sc1200
        - clip unsupported PIO5 and SWDMA0-2 modes down
        - fix unsupported/invalid modes being set on the device
        - fix BUG() on unsupported/invalid modes
          (which happened if the device accepted the setting)
      
      * scc_pata
        - clip unsupported PIO5, SWDMA0-2 and MWDMA0-2 modes down
      
      * serverworks
        - clip unsupported PIO5 and SWDMA0-2 modes down
        - fix DMA/UDMA timings/settings being cleared for unsupported/invalid modes
        - fix unsupported/invalid modes being set on the device
      
      * siimage
        - clip unsupported PIO5 and SWDMA0-2 modes down
        - clip DMA modes down for ATAPI devices (SATA chipsets)
      
      * sis5513
        - clip unsupported PIO5 mode down
        - fix BUG() on unsupported/invalid modes
      
      * sl82c105
        - clip unsupported SWDMA0-2 modes down
      
      * slc90e66
        - clip unsupported PIO5, SWDMA0-1 and MWDMA0 modes down
      
      * tc86c001
        - clip unsupported PIO5 and SWDMA0-2 modes down
        - fix PIO0 timings being programmed for PIO5/0x0F/SWDMA0-2/0x13-0x19 modes
        - fix invalid 0x00 DMA timing being programmed for MWDMA3-4/0x25-0x39 modes
        - fix unsupported/invalid modes being set on the device
      
      * triflex
        - clip unsupported PIO5 mode down
      
      * via82cxxx
        - fix random PIO timings being set for unsupported/invalid modes
        - fix unsupported/invalid modes being set on the device
      
      * pmac
        - clip unsupported PIO5 and SWDMA0-2 modes down
      
      * cmd640/ht6560b
        - clip DMA modes down (if CONFIG_BLK_DEV_IDEDMA=y)
        - fix PIO5 being clipped to PIO4 (if CONFIG_BLK_DEV_IDEDMA=n)
      
      * opti621
        - clip DMA modes down (if CONFIG_BLK_DEV_IDEDMA=y)
        - clip unsupported PIO4 to PIO3 (if CONFIG_BLK_DEV_IDEDMA=n)
      
      
      While at it:
      
      * Use ide_rate_filter() in cs5520.c::cs5520_tune_chipset().
      
      * Remove no longer needed checks from hpt366.c::hpt3{6,7}x_tune_chipset().
      Acked-by: default avatarSergei Shtylyov <sshtylyov@ru.mvista.com>
      Signed-off-by: default avatarBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
      7670df73
    • Bartlomiej Zolnierkiewicz's avatar
      ide: add missing ide_rate_filter() calls to ->speedproc()-s · a8028fcb
      Bartlomiej Zolnierkiewicz authored
      * Fix icside, cris-ide, au1xxx-ide, amd74xx, via82cxxx and pmac host drivers
        to use ide_rate_filter().
      
        This results in the following modes (from user requests) being clipped down:
        - invalid modes (values 0x46-0xFF)  [ for all hosts ]
        - unsupported by a host UDMA modes  [ for hosts which support UDMA]
        - all UDMA modes and MWDMA3-4 modes [ for hosts which don't support UDMA ]
        - invalid modes (values 0x25-0x39)  [ for hosts which don't support UDMA ]
      
      * Host driver specific changes in behavior:
      
        icside:
          - no change
      
        cris-ide
          - clip unsupported UDMA3-6 modes down
          - fix BUG() on trying to set unsupported UDMA3-6 modes
      
        au1xxx-ide/pmac
          - clip unsupported UDMA modes down
      
        amd74xx/via82cxxx
          - clip unsupported UDMA modes down
          - fix random PIO timings being set for unsupported/invalid modes
          - fix unsupported/invalid modes being set on the device
      
      * While at it remove no longer needed checks from pmac.c driver.
      Acked-by: default avatarSergei Shtylyov <sshtylyov@ru.mvista.com>
      Signed-off-by: default avatarBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
      a8028fcb
    • Sergei Shtylyov's avatar
      ide: call udma_filter() before resorting to the UltraDMA mask · 851dd33b
      Sergei Shtylyov authored
      Give the udma_filter() method call precedence over using the mode masks.
      Signed-off-by: default avatarSergei Shtylyov <sshtylyov@ru.mvista.com>
      Signed-off-by: default avatarBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
      851dd33b
    • Tejun Heo's avatar
      ide: make jmicron match vendor and device class · bda7970c
      Tejun Heo authored
      PATA part of all current JMB controllers behave the same way and
      JMicron confirms that all future ones will stay compatible.  Matching
      vendor and device class is enough.
      
      For backward compatibility, jmicron still needs to match 361,3,5,6,8
      DIDs regardless of device class if libata is not configured but won't
      need further DID update from this point.
      
      Bart: cosmetic fixes to jmicron_chipset
      Signed-off-by: default avatarTejun Heo <htejun@gmail.com>
      Cc: Ethan Hsiao <ethanhsiao@jmicron.com>
      Cc: Justin Tsai <justin@jmicron.com>
      Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
      Signed-off-by: default avatarBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
      bda7970c
    • Sergei Shtylyov's avatar
      pdc202xx_new: switch to using pci_get_slot() (take 2) · 07047935
      Sergei Shtylyov authored
      Switch to using pci_get_slot() in init_setup_pdc20270() to get to the mate chip
      behind DC21150 bridge as there's no need for the driver itself to walk the list
      of the PCI devices (and the driver didn't check the bus # of the found device).
      While at it, make it emit warning about IRQ # being fixed up (just like hpt366.c
      does) and "beautify" this whole function as well as init_setup_pdc20276()...
      Signed-off-by: default avatarSergei Shtylyov <sshtylyov@ru.mvista.com>
      Signed-off-by: default avatarBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
      07047935
    • Shaohua Li's avatar
      ide: hook ACPI _PSx method to IDE power on/off · 5e32132b
      Shaohua Li authored
      ACPI spec defines the sequence of IDE power on/off:
      Powering down:
      	Call _GTM.
      	Power down drive (calls _PS3 method and turns off power planes).
      Powering up:
      	Power up drive (calls _PS0 method if present and turns on power planes).
      	Call _STM passing info from _GTM (possibly modified), with ID data from
      	each drive.
      	Initialize the channel.
      	May modify the results of _GTF.
      	For each drive:
      		Call _GTF.
      		Execute task file (possibly modified).
      This patch adds the missed _PS0/_PS3 methods call.
      Signed-off-by: default avatarShaohua Li <shaohua.li@intel.com>
      Acked-by: default avatarLen Brown <len.brown@intel.com>
      Signed-off-by: default avatarBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
      5e32132b
    • Anton Vorontsov's avatar
      ide: Platform IDE driver · 8cb1f567
      Anton Vorontsov authored
      This is now very similar to pata_platform.c, they both use
      same platform data structure and same resources.
      
      To achieve that, byte_lanes_swapping platform data variable
      and platform specified iops removed from that driver. It's fine,
      since those were never used anyway.
      
      pata_platform and ide_platform are carrying same driver names,
      to easily switch between these drivers, without need to touch
      platform code.
      
      Bart:
      - build fix from Andrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarAnton Vorontsov <avorontsov@ru.mvista.com>
      Signed-off-by: default avatarVitaly Bordug <vitb@kernel.crashing.org>
      Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
      Acked-by: default avatarAlan Cox <alan@redhat.com>
      Signed-off-by: default avatarBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
      8cb1f567
    • Sergei Shtylyov's avatar
      hpt366: MWDMA filter for SATA cards (take 2) · b4e44369
      Sergei Shtylyov authored
      The Marvell bridge chips used on HighPoint SATA cards do not seem to support
      the MWDMA modes (at least that could be seen in their so-called drivers :-),
      so the driver needs to account for this -- to achieve this:
      
      - add mdma_filter() method from the original patch by Bartlomiej Zolnierkiewicz
        with his consent;
      
      - install the method for all chips to only return empty mask if a SATA drive
        is detected on HPT372{AN]/374 chips...
      Signed-off-by: default avatarSergei Shtylyov <sshtylyov@ru.mvista.com>
      Signed-off-by: default avatarBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
      b4e44369
    • Shane Huang's avatar
      atiixp: SB700 contains more than one IDE channel · 7cfa7168
      Shane Huang authored
      SB700 supports one physical IDE channel, but SB700 SATA controller
      supports combined mode.  When the SATA combined mode is enabled,
      two SATA ports (port4 and port5) share one IDE channel from IDE
      controller, and PATA will share the other IDE channel.
      
      Our previous patch adding SB700 IDE device ID only supports one
      IDE channel, which contains bug.  The attached patch fixes the bug.
      Signed-off-by: default avatar"Shane Huang" <Shane.Huang@amd.com>
      Acked-by: default avatarSergei Shtylyov <sshtylyov@ru.mvista.com>
      Signed-off-by: default avatarBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
      7cfa7168
  2. 06 Oct, 2007 1 commit
    • Benjamin Herrenschmidt's avatar
      Fix non-terminated PCI match table in PowerMac IDE · 71e4eda8
      Benjamin Herrenschmidt authored
      The PCI device table in the powermac IDE driver isn't properly
      terminated.  Depending on how your kernel is linked and other random
      factors, you can end up with this driver matched against any other PCI
      device in your system, possibly crashing at boot.
      
      Thanks to Heikki for tracking this down with me, the bug have been there
      for some time, though it rarely hurts due to luck.  In this case, the
      switch from .22 to .23-rc9 is causing it to show up due to differences
      in the resulting layout of .data I suppose.
      Signed-off-by: default avatarBenjamin Herrenschmidt <benh@kernel.crashing.org>
      Cc: Paul Mackerras <pmac@au1.ibm.com>
      Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
      Cc: Heikki Lindholm <holindho@cs.helsinki.fi>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      71e4eda8
  3. 17 Sep, 2007 2 commits
  4. 11 Sep, 2007 10 commits
  5. 10 Sep, 2007 1 commit
  6. 20 Aug, 2007 13 commits
  7. 01 Aug, 2007 1 commit