1. 23 Feb, 2015 10 commits
  2. 21 Feb, 2015 2 commits
  3. 20 Feb, 2015 11 commits
  4. 19 Feb, 2015 7 commits
  5. 17 Feb, 2015 1 commit
  6. 15 Feb, 2015 1 commit
  7. 14 Feb, 2015 2 commits
    • Sylvain Rochet's avatar
      net: phy: micrel: disable NAND-tree for KSZ8021, KSZ8031, KSZ8051, KSZ8081 · 2b0ba96c
      Sylvain Rochet authored
      
      
      NAND-tree is used to check wiring between MAC and PHY using NAND gates
      on the PHY side, hence the name.
      
      NAND-tree initial status is latched at reset by probing the IRQ pin.
      However some devices are sharing the PHY IRQ pin with other peripherals
      such as Atmel SAMA5D[34]x-EK boards when using the optional TM7000
      display module, therefore they are switching the PHY in NAND-tree test
      mode depending on the current IRQ line status at reset.
      
      This patch ensure PHY is not in NAND-tree test mode for all Micrel PHYs
      using IRQ line as a NAND-tree toggle mode at reset.
      Signed-off-by: default avatarSylvain Rochet <sylvain.rochet@finsecur.com>
      Signed-off-by: default avatarBoris Brezillon <boris.brezillon@free-electrons.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      2b0ba96c
    • hayeswang's avatar
      r8152: restore hw settings · 65bab84c
      hayeswang authored
      
      
      There is a capability which let the hw could change the settings
      automatically when the power change to ON. However, the USB reset
      would reset the settings to the hw default, so the driver has to
      restore the relative settings. Otherwise, it would influence the
      functions of the hw, and the compatibility for the USB hub and
      USB host controller.
      
      The relative settings are as following.
       - set the power down scale to 96.
       - enable the power saving function of USB 2.0.
       - disable the ALDPS of ECM mode.
       - set burst mode depending on the burst size.
       - enable the flow control of endpoint full.
       - set fifo empty boundary to 32448 bytes.
       - enable the function of exiting LPM when Rx OK occurs.
       - set the connect timer to 1.
      Signed-off-by: default avatarHayes Wang <hayeswang@realtek.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      65bab84c
  8. 13 Feb, 2015 4 commits
  9. 11 Feb, 2015 2 commits