1. 02 Feb, 2008 4 commits
    • Bartlomiej Zolnierkiewicz's avatar
    • Bartlomiej Zolnierkiewicz's avatar
      ide: add ->cable_detect method to ide_hwif_t · bfa14b42
      Bartlomiej Zolnierkiewicz authored
      * Add ->cable_detect method to ide_hwif_t.
      
      * Call the new method in ide_init_port() if:
        - the host supports UDMA modes > UDMA2 ('hwif->ultra_mask & 78')
        - DMA initialization was successful (if hwif->dma_base is not set
          ide_init_port() sets hwif->ultra_mask to zero)
        - "idex=ata66" is not used ('hwif->cbl != ATA_CBL_PATA40_SHORT')
      
      * Convert PCI host drivers to use ->cable_detect method.
      
      While at it:
      
      * Factor out cable detection to separate functions (if not already done).
      
      * hpt366.c/it8213.c/slc90e66.c:
        - don't check cable type if "idex=ata66" is used
      
      * pdc202xx_new.c:
        - add __devinit tag to pdcnew_cable_detect()
      
      * pdc202xx_old.c:
        - rename pdc202xx_old_cable_detect() to pdc2026x_old_cable_detect()
        - add __devinit tag to pdc2026x_old_cable_detect()
      Reviewed-by: default avatarSergei Shtylyov <sshtylyov@ru.mvista.com>
      Signed-off-by: default avatarBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
      bfa14b42
    • Bartlomiej Zolnierkiewicz's avatar
      ide: add struct ide_port_info instances to legacy host drivers · c413b9b9
      Bartlomiej Zolnierkiewicz authored
      * Remove 'struct pci_dev *dev' argument from ide_hwif_setup_dma().
      
      * Un-static ide_hwif_setup_dma() and add CONFIG_BLK_DEV_IDEDMA_PCI=n version.
      
      * Add 'const struct ide_port_info *d' argument to ide_device_add[_all]().
      
      * Factor out generic ports init from ide_pci_setup_ports() to ide_init_port(),
        move it to ide-probe.c and call it in in ide_device_add_all() instead of
        ide_pci_setup_ports().
      
      * Move ->mate setup to ide_device_add_all() from ide_port_init().
      
      * Add IDE_HFLAG_NO_AUTOTUNE host flag for host drivers that don't enable
        ->autotune currently.
      
      * Setup hwif->chipset in ide_init_port() but iff pi->chipset is set
        (to not override setup done by ide_hwif_configure()).
      
      * Add ETRAX host handling to ide_device_add_all().
      
      * cmd640.c: set IDE_HFLAG_ABUSE_* also for CONFIG_BLK_DEV_CMD640_ENHANCED=n.
      
      * pmac.c: make pmac_ide_setup_dma() return an error value and move DMA masks
        setup to pmac_ide_setup_device().
      
      * Add 'struct ide_port_info' instances to legacy host drivers, pass them to
        ide_device_add() calls and then remove open-coded ports initialization.
      Reviewed-by: default avatarSergei Shtylyov <sshtylyov@ru.mvista.com>
      Signed-off-by: default avatarBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
      c413b9b9
    • Bartlomiej Zolnierkiewicz's avatar
      atiixp/cs5535/scc_pata: fix "idex=ata66" parameter handling · b4d1c73d
      Bartlomiej Zolnierkiewicz authored
      Don't override the cable type if the "idex=ata66" parameter was used.
      
      While at it:
      
      * atiixp.c: factor out cable detection to atiixp_cable_detect() from
        init_hwif_atiixp().
      
      * cs5535.c: pass 'ide_hwif_t *hwif' instead of 'struct pci_dev *dev' to
        cs5535_cable_detect().
      
      * scc_pata.c: factor out cable detection to scc_cable_detect() from
        init_hwif_scc() and remove incorrect comment.
      Signed-off-by: default avatarBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
      b4d1c73d
  2. 01 Feb, 2008 11 commits
  3. 26 Jan, 2008 18 commits
  4. 25 Jan, 2008 7 commits