1. 15 Feb, 2010 4 commits
  2. 13 Dec, 2009 1 commit
  3. 11 Dec, 2009 3 commits
  4. 09 Dec, 2009 1 commit
  5. 22 Nov, 2009 3 commits
  6. 10 Nov, 2009 1 commit
  7. 25 Oct, 2009 1 commit
  8. 22 Oct, 2009 1 commit
  9. 20 Oct, 2009 1 commit
    • Tony Lindgren's avatar
      omap: headers: Move remaining headers from include/mach to include/plat · ce491cf8
      Tony Lindgren authored
      Move the remaining headers under plat-omap/include/mach
      to plat-omap/include/plat. Also search and replace the
      files using these headers to include using the right path.
      This was done with:
      headers=$(cd $mach_dir_old && ls *.h)
      omap_dirs="arch/arm/*omap*/ \
      drivers/video/omap \
      other_files="drivers/leds/leds-ams-delta.c \
      drivers/mfd/menelaus.c \
      drivers/mfd/twl4030-core.c \
      for header in $headers; do
      	old="#include <mach\/$header"
      	new="#include <plat\/$header"
      	for dir in $omap_dirs; do
      		find $dir -type f -name \*.[chS] | \
      			xargs sed -i "s/$old/$new/"
      	find drivers/ -type f -name \*omap*.[chS] | \
      		xargs sed -i "s/$old/$new/"
      	for file in $other_files; do
      		sed -i "s/$old/$new/" $file
      for header in $(ls $mach_dir_old/*.h); do
      	git mv $header $plat_dir_new/
      Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
  10. 19 Oct, 2009 1 commit
  11. 24 Sep, 2009 1 commit
  12. 03 Sep, 2009 1 commit
    • Paul Walmsley's avatar
      OMAP2/3 board-*.c files: read bootloader configuration earlier · b3c6df3a
      Paul Walmsley authored
      Most board-*.c files read configuration data from the bootloader in
      their .init_machine() function.  This needs to happen earlier, at some
      point before omap2_init_common_hw() is called.  This is because a
      future patch will use the bootloader serial console port information
      to enable the UART clocks earlier, immediately after omap2_clk_init().
      This is in turn necessary since otherwise clock tree usecounts on
      clocks like dpll4_m2x2_ck will be bogus, which can cause the
      currently-active console UART clock to be disabled during boot.
      Signed-off-by: default avatarPaul Walmsley <paul@pwsan.com>
  13. 02 Sep, 2009 1 commit
  14. 28 Aug, 2009 1 commit
  15. 24 Jul, 2009 1 commit
    • Jean Pihet's avatar
      OMAP3 SDRC: add support for 2 SDRAM chip selects · 58cda884
      Jean Pihet authored
      Some OMAP3 boards (Beagle Cx, Overo, RX51, Pandora) have 2
      SDRAM parts connected to the SDRC.
      This patch adds the following:
      - add a new argument of type omap_sdrc_params struct*
      to omap2_init_common_hw and omap2_sdrc_init for the 2nd CS params
      - adapted the OMAP boards files to the new prototype of
      - add the SDRC 2nd CS registers offsets defines
      - adapt the sram sleep code to configure the SDRC for the 2nd CS
      Note: If the 2nd param to omap2_init_common_hw is NULL, then the
      parameters are not programmed into the SDRC CS1 registers
      Tested on 3430 SDP and Beagleboard rev C2 and B5, with
      suspend/resume and frequency changes (cpufreq).
      Signed-off-by: default avatarJean Pihet <jpihet@mvista.com>
      Signed-off-by: default avatarPaul Walmsley <paul@pwsan.com>
  16. 28 May, 2009 2 commits
  17. 25 Mar, 2009 1 commit
  18. 23 Mar, 2009 1 commit