1. 03 Jul, 2014 14 commits
    • Hugh Dickins's avatar
      shmem: fix init_page_accessed use to stop !PageLRU bug · 66d2f4d2
      Hugh Dickins authored
      Under shmem swapping load, I sometimes hit the VM_BUG_ON_PAGE(!PageLRU)
      in isolate_lru_pages() at mm/vmscan.c:1281!
      Commit 2457aec6
       ("mm: non-atomically mark page accessed during page
      cache allocation where possible") looks like interrupted work-in-progress.
      mm/filemap.c's call to init_page_accessed() is fine, but not mm/shmem.c's
      - shmem_write_begin() is clearly wrong to use it after shmem_getpage(),
      when the page is always visible in radix_tree, and often already on LRU.
      Revert change to shmem_write_begin(), and use init_page_accessed() or
      mark_page_accessed() appropriately for SGP_WRITE in shmem_getpage_gfp().
      SGP_WRITE also covers shmem_symlink(), which did not mark_page_accessed()
      before; but since many other filesystems use [__]page_symlink(), which did
      and does mark the page accessed, consider this as rectifying an oversight.
      Signed-off-by: default avatarHugh Dickins <hughd@google.com>
      Acked-by: default avatarMel Gorman <mgorman@suse.de>
      Cc: Johannes Weiner <hannes@cmpxchg.org>
      Cc: Vlastimil Babka <vbabka@suse.cz>
      Cc: Michal Hocko <mhocko@suse.cz>
      Cc: Dave Hansen <dave.hansen@intel.com>
      Cc: Prabhakar Lad <prabhakar.csengg@gmail.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
    • Andrew Morton's avatar
      kernel/printk/printk.c: revert "printk: enable interrupts before calling... · d18bbc21
      Andrew Morton authored
      kernel/printk/printk.c: revert "printk: enable interrupts before calling console_trylock_for_printk()"
      Revert commit 939f04be ("printk: enable interrupts before calling
      Andreas reported:
      : None of the post 3.15 kernel boot for me. They all hang at the GRUB
      : screen telling me it loaded and started the kernel, but the kernel
      : itself stops before it prints anything (or even replaces the GRUB
      : background graphics).
       is modest latency reduction.  Revert it until we understand
      the reason for these failures.
      Reported-by: default avatarAndreas Bombe <aeb@debian.org>
      Cc: Jan Kara <jack@suse.cz>
      Cc: Steven Rostedt <rostedt@goodmis.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
    • Shuah Khan's avatar
      tools/testing/selftests/ipc/msgque.c: improve error handling when not running as root · e84f1ab3
      Shuah Khan authored
      The test fails in the middle when it is not run as root while accessing
      /proc/sys/kernel/msg_next_id.  Changed it to check for root at the
      beginning of the test and exit if not root.
      Signed-off-by: default avatarShuah Khan <shuah.kh@samsung.com>
      Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
      Cc: Davidlohr Bueso <davidlohr@hp.com>
      Cc: Colin Ian King <colin.king@canonical.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
    • Heiko Carstens's avatar
      fs/seq_file: fallback to vmalloc allocation · 058504ed
      Heiko Carstens authored
      There are a couple of seq_files which use the single_open() interface.
      This interface requires that the whole output must fit into a single
      E.g.  for /proc/stat allocation failures have been observed because an
      order-4 memory allocation failed due to memory fragmentation.  In such
      situations reading /proc/stat is not possible anymore.
      Therefore change the seq_file code to fallback to vmalloc allocations
      which will usually result in a couple of order-0 allocations and hence
      also work if memory is fragmented.
      For reference a call trace where reading from /proc/stat failed:
        sadc: page allocation failure: order:4, mode:0x1040d0
        CPU: 1 PID: 192063 Comm: sadc Not tainted 3.10.0-123.el7.s390x #1
        Call Trace:
      Signed-off-by: default avatarHeiko Carstens <heiko.carstens@de.ibm.com>
      Tested-by: default avatarDavid Rientjes <rientjes@google.com>
      Cc: Ian Kent <raven@themaw.net>
      Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
      Cc: Thorsten Diehl <thorsten.diehl@de.ibm.com>
      Cc: Andrea Righi <andrea@betterlinux.com>
      Cc: Christoph Hellwig <hch@infradead.org>
      Cc: Al Viro <viro@zeniv.linux.org.uk>
      Cc: Stefan Bader <stefan.bader@canonical.com>
      Cc: <stable@vger.kernel.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
    • Heiko Carstens's avatar
      /proc/stat: convert to single_open_size() · f74373a5
      Heiko Carstens authored
      These two patches are supposed to "fix" failed order-4 memory
      allocations which have been observed when reading /proc/stat.  The
      problem has been observed on s390 as well as on x86.
      To address the problem change the seq_file memory allocations to
      fallback to use vmalloc, so that allocations also work if memory is
      This approach seems to be simpler and less intrusive than changing
      /proc/stat to use an interator.  Also it "fixes" other users as well,
      which use seq_file's single_open() interface.
      This patch (of 2):
      Use seq_file's single_open_size() to preallocate a buffer that is large
      enough to hold the whole output, instead of open coding it.  Also
      calculate the requested size using the number of online cpus instead of
      possible cpus, since the size of the output only depends on the number
      of online cpus.
      Signed-off-by: default avatarHeiko Carstens <heiko.carstens@de.ibm.com>
      Acked-by: default avatarDavid Rientjes <rientjes@google.com>
      Cc: Ian Kent <raven@themaw.net>
      Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
      Cc: Thorsten Diehl <thorsten.diehl@de.ibm.com>
      Cc: Andrea Righi <andrea@betterlinux.com>
      Cc: Christoph Hellwig <hch@infradead.org>
      Cc: Al Viro <viro@zeniv.linux.org.uk>
      Cc: Stefan Bader <stefan.bader@canonical.com>
      Cc: <stable@vger.kernel.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
    • Chen Yucong's avatar
      hwpoison: fix the handling path of the victimized page frame that belong to non-LRU · 0bc1f8b0
      Chen Yucong authored
      Until now, the kernel has the same policy to handle victimized page
      frames that belong to kernel-space(reserved/slab-subsystem) or
      non-LRU(unknown page state).  In other word, the result of handling
      either of these victimized page frames is (IGNORED | FAILED), and the
      return value of memory_failure() is -EBUSY.
      This patch is to avoid that memory_failure() returns very soon due to
      the "true" value of (!PageLRU(p)), and it also ensures that
      action_result() can report more precise information("reserved kernel",
      "kernel slab", and "unknown page state") instead of "non LRU",
      especially for memory errors which are detected by memory-scrubbing.
      Andi said:
      : While running the mcelog test suite on 3.14 I hit the following VM_BUG_ON:
      : soft_offline: 0x56d4: unknown non LRU page type 3ffff800008000
      : page:ffffea000015b400 count:3 mapcount:2097169 mapping:          (null) index:0xffff8800056d7000
      : page flags: 0x3ffff800004081(locked|slab|head)
      : ------------[ cut here ]------------
      : kernel BUG at mm/rmap.c:1495!
      : I think what happened is that a LRU page turned into a slab page in
      : parallel with offlining.  memory_failure initially tests for this case,
      : but doesn't retest later after the page has been locked.
      : ...
      : I ran this patch in a loop over night with some stress plus
      : the mcelog test suite running in a loop. I cannot guarantee it hit it,
      : but it should have given it a good beating.
      : The kernel survived with no messages, although the mcelog test suite
      : got killed at some point because it couldn't fork anymore. Probably
      : some unrelated problem.
      : So the patch is ok for me for .16.
      Signed-off-by: default avatarChen Yucong <slaoub@gmail.com>
      Acked-by: default avatarNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
      Reported-by: default avatarAndi Kleen <andi@firstfloor.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
    • Chen Yucong's avatar
      mm:vmscan: update the trace-vmscan-postprocess.pl for event vmscan/mm_vmscan_lru_isolate · b27ebf77
      Chen Yucong authored
      When using trace-vmscan-postprocess.pl for checking the file/anon rate
      of scanning, we can find that it can not be performed.  At the same
      time, the following message will be reported:
        WARNING: Format not as expected for event vmscan/mm_vmscan_lru_isolate
        'file' != 'contig_taken' Fewer fields than expected in format at
        ./trace-vmscan-postprocess.pl line 171, <FORMAT> line 76.
      In trace-vmscan-postprocess.pl, (contig_taken, contig_dirty, and
      contig_failed) are be associated respectively to (nr_lumpy_taken,
      nr_lumpy_dirty, and nr_lumpy_failed) for lumpy reclaim.  Via commit
       ("mm: vmscan: remove lumpy reclaim"), lumpy reclaim had
      already been removed by Mel, but the update for
      trace-vmscan-postprocess.pl was missed.
      Signed-off-by: default avatarChen Yucong <slaoub@gmail.com>
      Cc: Mel Gorman <mel@csn.ul.ie>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
    • Namjae Jeon's avatar
      msync: fix incorrect fstart calculation · 496a8e68
      Namjae Jeon authored
      Fix a regression caused by 7fc34a62
       ("mm/msync.c: sync only the
      requested range in msync()").
      xfstests generic/075 fail occured on ext4 data=journal mode because the
      intended range was not syncing due to wrong fstart calculation.
      Signed-off-by: default avatarNamjae Jeon <namjae.jeon@samsung.com>
      Signed-off-by: default avatarAshish Sangwan <a.sangwan@samsung.com>
      Reported-by: default avatarEric Whitney <enwlinux@gmail.com>
      Tested-by: default avatarEric Whitney <enwlinux@gmail.com>
      Acked-by: default avatarMatthew Wilcox <matthew.r.wilcox@intel.com>
      Reviewed-by: default avatarLukas Czerner <lczerner@redhat.com>
      Tested-by: default avatarLukas Czerner <lczerner@redhat.com>
      Reviewed-by: default avatarTheodore Ts'o <tytso@mit.edu>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
    • Minchan Kim's avatar
      zram: revalidate disk after capacity change · 2e32baea
      Minchan Kim authored
      Alexander reported mkswap on /dev/zram0 is failed if other process is
      opening the block device file.
      Step is as follows,
      0. Reset the unused zram device.
      1. Use a program that opens /dev/zram0 with O_RDWR and sleeps
         until killed.
      2. While that program sleeps, echo the correct value to
      3. Verify (e.g. in /proc/partitions) that the disk size is applied
         correctly. It is.
      4. While that program still sleeps, attempt to mkswap /dev/zram0.
         This fails: mkswap: error: swap area needs to be at least 40 KiB
      When I investigated, the size get by ioctl(fd, BLKGETSIZE64, xxx) on
      mkswap to get a size of blockdev was zero although zram0 has right size by
      The reason is zram didn't revalidate disk after changing capacity so that
      size of blockdev's inode is not uptodate until all of file is close.
      This patch should fix the BUG.
      Signed-off-by: default avatarMinchan Kim <minchan@kernel.org>
      Reported-by: default avatarAlexander E. Patrakov <patrakov@gmail.com>
      Tested-by: default avatarAlexander E. Patrakov <patrakov@gmail.com>
      Reviewed-by: default avatarSergey Senozhatsky <sergey.senozhatsky@gmail.com>
      Cc: Nitin Gupta <ngupta@vflare.org>
      Acked-by: default avatarJerome Marchand <jmarchan@redhat.com>
      Cc: <stable@vger.kernel.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
    • Shuah Khan's avatar
      tools: memory-hotplug fix unexpected operator error · e98f7762
      Shuah Khan authored
      on-off-test uses "$UID != 0" to test for root, but $UID is a construct
      specific to bash.  Using /bin/sh that isn't bash results in the
      following error (due to the "$UID" part expanding to nothing):
        ./on-off-test.sh: 9: [: !=: unexpected operator
      Change Makefile to use bash instead.
      Signed-off-by: default avatarShuah Khan <shuah.kh@samsung.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
    • Shuah Khan's avatar
      tools: cpu-hotplug fix unexpected operator error · 1bd702e6
      Shuah Khan authored
      on-off-test uses "$UID != 0" to test for root, but $UID is a construct
      specific to bash.  Using /bin/sh that isn't bash results in the
      following error (due to the "$UID" part expanding to nothing):
        ./on-off-test.sh: 9: [: !=: unexpected operator
      Change Makefile to use bash instead.
      Signed-off-by: default avatarShuah Khan <shuah.kh@samsung.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
    • Ian Kent's avatar
      autofs4: fix false positive compile error · 571ff473
      Ian Kent authored
      On strict build environments we can see:
        fs/autofs4/inode.c: In function 'autofs4_fill_super':
        fs/autofs4/inode.c:312: error: 'pgrp' may be used uninitialized in this function
        make[2]: *** [fs/autofs4/inode.o] Error 1
        make[1]: *** [fs/autofs4] Error 2
        make: *** [fs] Error 2
        make: *** Waiting for unfinished jobs....
      This is due to the use of pgrp_set being used to indicate pgrp has has
      been set rather than initializing pgrp itself.
      Signed-off-by: default avatarIan Kent <raven@themaw.net>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
    • Joonsoo Kim's avatar
      slub: fix off by one in number of slab tests · 8a5b20ae
      Joonsoo Kim authored
      min_partial means minimum number of slab cached in node partial list.
      So, if nr_partial is less than it, we keep newly empty slab on node
      partial list rather than freeing it.  But if nr_partial is equal or
      greater than it, it means that we have enough partial slabs so should
      free newly empty slab.  Current implementation missed the equal case so
      if we set min_partial is 0, then, at least one slab could be cached.
      This is critical problem to kmemcg destroying logic because it doesn't
      works properly if some slabs is cached.  This patch fixes this problem.
      Fixes 91cb69620284 ("slub: make dead memcg caches discard free slabs
      Signed-off-by: default avatarJoonsoo Kim <iamjoonsoo.kim@lge.com>
      Acked-by: default avatarVladimir Davydov <vdavydov@parallels.com>
      Cc: Christoph Lameter <cl@linux.com>
      Cc: Pekka Enberg <penberg@kernel.org>
      Acked-by: default avatarDavid Rientjes <rientjes@google.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
    • Michal Nazarewicz's avatar
      mm: page_alloc: fix CMA area initialisation when pageblock > MAX_ORDER · dc78327c
      Michal Nazarewicz authored
      With a kernel configured with ARM64_64K_PAGES && !TRANSPARENT_HUGEPAGE,
      the following is triggered at early boot:
        SMP: Total of 8 processors activated.
        devtmpfs: initialized
        Unable to handle kernel NULL pointer dereference at virtual address 00000008
        pgd = fffffe0000050000
        [00000008] *pgd=00000043fba00003, *pmd=00000043fba00003, *pte=00e0000078010407
        Internal error: Oops: 96000006 [#1] SMP
        Modules linked in:
        CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.15.0-rc864k+ #44
        task: fffffe03bc040000 ti: fffffe03bc080000 task.ti: fffffe03bc080000
        PC is at __list_add+0x10/0xd4
        LR is at free_one_page+0x270/0x638
        Call trace:
      This happens because init_cma_reserved_pageblock() calls
      __free_one_page() with pageblock_order as page order but it is bigger
      than MAX_ORDER.  This in turn causes accesses past zone->free_list[].
      Fix the problem by changing init_cma_reserved_pageblock() such that it
      splits pageblock into individual MAX_ORDER pages if pageblock is bigger
      than a MAX_ORDER page.
      In cases where !CONFIG_HUGETLB_PAGE_SIZE_VARIABLE, which is all
      architectures expect for ia64, powerpc and tile at the moment, the
      “pageblock_order > MAX_ORDER” condition will be optimised out since both
      sides of the operator are constants.  In cases where pageblock size is
      variable, the performance degradation should not be significant anyway
      since init_cma_reserved_pageblock() is called only at boot time at most
      MAX_CMA_AREAS times which by default is eight.
      Signed-off-by: default avatarMichal Nazarewicz <mina86@mina86.com>
      Reported-by: default avatarMark Salter <msalter@redhat.com>
      Tested-by: default avatarMark Salter <msalter@redhat.com>
      Tested-by: default avatarChristopher Covington <cov@codeaurora.org>
      Cc: Mel Gorman <mgorman@suse.de>
      Cc: David Rientjes <rientjes@google.com>
      Cc: Marek Szyprowski <m.szyprowski@samsung.com>
      Cc: Catalin Marinas <catalin.marinas@arm.com>
      Cc: <stable@vger.kernel.org>	[3.5+]
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
  2. 01 Jul, 2014 3 commits
  3. 30 Jun, 2014 2 commits
  4. 29 Jun, 2014 11 commits
  5. 28 Jun, 2014 6 commits
    • Linus Torvalds's avatar
      Merge tag 'spi-v3.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi · 24b414d5
      Linus Torvalds authored
      Pull spi fixes from Mark Brown:
       "A few driver specific fixes, the biggest one being a fix for the newly
        added Qualcomm SPI controller driver to make it not use its internal
        chip select due to hardware bugs, replacing it with GPIOs"
      * tag 'spi-v3.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
        spi: qup: Remove chip select function
        spi: qup: Fix order of spi_register_master
        spi: sh-sci: fix use-after-free in sh_sci_spi_remove()
        spi/pxa2xx: fix incorrect SW mode chipselect setting for BayTrail LPSS SPI
    • Linus Torvalds's avatar
      Merge tag 'regulator-v3.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator · 4194976b
      Linus Torvalds authored
      Pull regulator fixes from Mark Brown:
       "Several driver specific fixes here, the palmas fixes being especially
        important for a range of boards - the recent updates to support new
        devices have introduced several regressions"
      * tag 'regulator-v3.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
        regulator: tps65218: Correct the the config register for LDO1
        regulator: tps65218: Add the missing of_node assignment in probe
        regulator: palmas: fix typo in enable_reg calculation
        regulator: bcm590xx: fix vbus name
        regulator: palmas: Fix SMPS enable/disable/is_enabled
    • Linus Torvalds's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending · eb477e03
      Linus Torvalds authored
      Pull SCSI target fixes from Nicholas Bellinger:
       "Mostly minor fixes this time around.  The highlights include:
         - iscsi-target CHAP authentication fixes to enforce explicit key
           values (Tejas Vaykole + rahul.rane)
         - fix a long-standing OOPs in target-core when a alua configfs
           attribute is accessed after port symlink has been removed.
           (Sebastian Herbszt)
         - fix a v3.10.y iscsi-target regression causing the login reject
           status class/detail to be ignored (Christoph Vu-Brugier)
         - fix a v3.10.y iscsi-target regression to avoid rejecting an
           existing ITT during Data-Out when data-direction is wrong (Santosh
           Kulkarni + Arshad Hussain)
         - fix a iscsi-target related shutdown deadlock on UP kernels (Mikulas
         - fix a v3.16-rc1 build issue with vhost-scsi + !CONFIG_NET (MST)"
      * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
        iscsi-target: fix iscsit_del_np deadlock on unload
        iovec: move memcpy_from/toiovecend to lib/iovec.c
        iscsi-target: Avoid rejecting incorrect ITT for Data-Out
        tcm_loop: Fix memory leak in tcm_loop_submission_work error path
        iscsi-target: Explicily clear login response PDU in exception path
        target: Fix left-over se_lun->lun_sep pointer OOPs
        iscsi-target; Enforce 1024 byte maximum for CHAP_C key value
        iscsi-target: Convert chap_server_compute_md5 to use kstrtoul
    • Mark Brown's avatar
    • Mark Brown's avatar
      Merge remote-tracking branches 'regulator/fix/bcm590xx',... · 11767484
      Mark Brown authored
      Merge remote-tracking branches 'regulator/fix/bcm590xx', 'regulator/fix/palmas' and 'regulator/fix/tps65218' into regulator-linus
    • Mikulas Patocka's avatar
      iscsi-target: fix iscsit_del_np deadlock on unload · 81a9c5e7
      Mikulas Patocka authored
      On uniprocessor preemptible kernel, target core deadlocks on unload. The
      following events happen:
      * iscsit_del_np is called
      * it calls send_sig(SIGINT, np->np_thread, 1);
      * the scheduler switches to the np_thread
      * the np_thread is woken up, it sees that kthread_should_stop() returns
        false, so it doesn't terminate
      * the np_thread clears signals with flush_signals(current); and goes back
        to sleep in iscsit_accept_np
      * the scheduler switches back to iscsit_del_np
      * iscsit_del_np calls kthread_stop(np->np_thread);
      * the np_thread is waiting in iscsit_accept_np and it doesn't respond to
      The deadlock could be resolved if the administrator sends SIGINT signal to
      the np_thread with killall -INT iscsi_np
      The reproducible deadlock was introduced in commit
      , but the thread-stopping code was
      racy even before.
      This patch fixes the problem. Using kthread_should_stop to stop the
      np_thread is unreliable, so we test np_thread_state instead. If
      np_thread_state equals ISCSI_NP_THREAD_SHUTDOWN, the thread exits.
      Signed-off-by: default avatarMikulas Patocka <mpatocka@redhat.com>
      Cc: stable@vger.kernel.org
      Signed-off-by: default avatarNicholas Bellinger <nab@linux-iscsi.org>
  6. 27 Jun, 2014 4 commits
    • Linus Torvalds's avatar
      Merge tag 'iommu-fixes-v3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu · 3e7b256c
      Linus Torvalds authored
      Pull IOMMU fixes from Joerg Roedel:
       - fix VT-d regression with handling multiple RMRR entries per device
       - fix a small race that was left in the mmu_notifier handling in the
         AMD IOMMUv2 driver
      * tag 'iommu-fixes-v3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
        iommu/amd: Fix small race between invalidate_range_end/start
        iommu/vt-d: fix bug in handling multiple RMRRs for the same PCI device
    • Linus Torvalds's avatar
      Merge branch 'x86/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip · d1fc98ba
      Linus Torvalds authored
      Pull x86 fixes from Peter Anvin:
       "A pile of fixes related to the VDSO, EFI and 32-bit badsys handling.
        It turns out that removing the section headers from the VDSO breaks
        gdb, so this puts back most of them.  A very simple typo broke
        rt_sigreturn on some versions of glibc, with obviously disastrous
        results.  The rest is pretty much fixes for the corresponding fallout.
        The EFI fixes fixes an arithmetic overflow on 32-bit systems and
        quiets some build warnings.
        Finally, when invoking an invalid system call number on x86-32, we
        bypass a bunch of handling, which can make the audit code oops"
      * 'x86/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
        efi-pstore: Fix an overflow on 32-bit builds
        x86/vdso: Error out in vdso2c if DT_RELA is present
        x86/vdso: Move DISABLE_BRANCH_PROFILING into the vdso makefile
        x86_32, signal: Fix vdso rt_sigreturn
        x86_32, entry: Do syscall exit work on badsys (CVE-2014-4508)
        x86/vdso: Create .build-id links for unstripped vdso files
        x86/vdso: Remove some redundant in-memory section headers
        x86/vdso: Improve the fake section headers
        x86/vdso2c: Use better macros for ELF bitness
        x86/vdso: Discard the __bug_table section
        efi: Fix compiler warnings (unused, const, type)
    • Linus Torvalds's avatar
      Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus · c9a60666
      Linus Torvalds authored
      Pull MIPS fixes from Ralf Baechle:
       "This is dominated by a large number of changes necessary for the MIPS
        BPF code.  code.  Aside of that there are
         - a fix for the MSC system controller support code.
         - a Turbochannel fix.
         - a recordmcount fix that's MIPS-specific.
         - barrier fixes to smp-cps / pm-cps after unrelated changes elsewhere
           in the kernel.
         - revert support for MSA registers in the signal frames.  The
           reverted patch did modify the signal stack frame which of course is
         - fix math-emu build breakage with older compilers.
         - some related cleanup.
         - fix Lasat build error if CONFIG_CRC32 isn't set to y by the user"
      * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (27 commits)
        MIPS: Lasat: Fix build error if CRC32 is not enabled.
        TC: Handle device_register() errors.
        MIPS: MSC: Prevent out-of-bounds writes to MIPS SC ioremap'd region
        MIPS: bpf: Fix stack space allocation for BPF memwords on MIPS64
        MIPS: BPF: Use 32 or 64-bit load instruction to load an address to register
        MIPS: bpf: Fix PKT_TYPE case for big-endian cores
        MIPS: BPF: Prevent kernel fall over for >=32bit shifts
        MIPS: bpf: Drop update_on_xread and always initialize the X register
        MIPS: bpf: Fix is_range() semantics
        MIPS: bpf: Use pr_debug instead of pr_warn for unhandled opcodes
        MIPS: bpf: Fix return values for VLAN_TAG_PRESENT case
        MIPS: bpf: Use correct mask for VLAN_TAG case
        MIPS: bpf: Fix branch conditional for BPF_J{GT/GE} cases
        MIPS: bpf: Add SEEN_SKB to flags when looking for the PKT_TYPE
        MIPS: bpf: Use 'andi' instead of 'and' for the VLAN cases
        MIPS: bpf: Return error code if the offset is a negative number
        MIPS: bpf: Use the LO register to get division's quotient
        MIPS: mm: uasm: Fix lh micro-assembler instruction
        MIPS: uasm: Add SLT uasm instruction
        MIPS: uasm: Add s3s1s2 instruction builder
    • Linus Torvalds's avatar
      Merge tag 'arc-fixes-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc · 1857a5b6
      Linus Torvalds authored
      Pull ARC fixes from Vineet Gupta:
       "Some SMP changes, a ptrace request for NPTL debugging, bunch of build
      * tag 'arc-fixes-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
        ARC: [SMP] Enable icache coherency
        ARC: [SMP] Fix IPI IRQ registration
        ARC: Implement ptrace(PTRACE_GET_THREAD_AREA)
        ARC: optimize kernel bss clearing in early boot code
        ARC: Fix build breakage for !CONFIG_ARC_DW2_UNWIND
        ARC: fix build warning in devtree
        ARC: remove checks for CONFIG_ARC_MMU_V4