- 22 Apr, 2009 40 commits
-
-
Abhijeet Kolekar authored
3945 can now use iwl_mac_config_interface from iwlwifi. Signed-off-by:
Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by:
Reinette Chatre <reinette.chatre@intel.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Abhijeet Kolekar authored
add config_ap lib op to iwlwifi and iwl3945 in preparation of future 3945 porting actions. Signed-off-by:
-
Abhijeet Kolekar authored
3945 can now use iwl_mac_config from iwlwifi Signed-off-by:
-
Abhijeet Kolekar authored
3945 can now use iwl_mac_remove_interface from iwlwifi Signed-off-by:
-
Abhijeet Kolekar authored
Signed-off-by:
-
Abhijeet Kolekar authored
3945 can now use iwl_set_mode from iwlcore library. Signed-off-by:
-
Abhijeet Kolekar authored
add set_rxon_chain op to iwlwifi cfg ops in preparation of future 3945 porting work. Signed-off-by:
-
Abhijeet Kolekar authored
iwl3945 can now use iwl_get_sta_id. Signed-off-by:
-
Abhijeet Kolekar authored
Patch unifies the add_station function for 3945 and iwlwifi drivers. Signed-off-by:
-
Abhijeet Kolekar authored
Patch replaces station management functions with ops declared. Signed-off-by:
-
Abhijeet Kolekar authored
Patch replaces station function used in driver by station management ops in 3945. Signed-off-by:
-
Abhijeet Kolekar authored
This patch adds declarations for station management ops to iwlwifi drivers. Signed-off-by:
-
Abhijeet Kolekar authored
Delay mode setting till uCode is ready. Signed-off-by:
-
Abhijeet Kolekar authored
Patch adds commit_rxon lib operation to iwlwifi and iwl3945 drivers. Signed-off-by:
-
Abhijeet Kolekar authored
3945 can use iwl_mac_beacon_update. Signed-off-by:
-
Abhijeet Kolekar authored
3945 can use iwl_bss_info_changed. A new lib op is created for post_assoicate to distinguish between 3945 and iwlwifi's post_associate operations. Signed-off-by:
-
Bing Zhao authored
libertas: add support for Marvell SD8688 chip Use RxPD->pkt_ptr to locate eth803 header in the packet received since SD8688/v10 firmware allows a gap between RxPD and eth803 header. Set SDIO block size to 256 for CMD53. The maximum block size for SD8688 WLAN function is set to 512 in TPLFE_MAX_BLK_SIZE. But using 512 as block size results upto 2K bytes data (4 blocks) being transferred and causes buffer overflow in firmware. Both changes above are backward compatible with earlier firmware versions for SD8385/SD8686. The SDIO_DEVICE_IDs for SD8688 chip are added in include/linux/mmc/sdio_ids.h Signed-off-by:
Kiran Divekar <dkiran@marvell.com> Signed-off-by:
Bing Zhao <bzhao@marvell.com> Acked-by:
Dan Williams <dcbw@redhat.com> Signed-off-by:
-
Max Filippov authored
p54spi_wakeup and p54spi_tx_frame used busy-waiting loop to poll for 'ready' bits in SPI_ADRS_HOST_INTERRUPTS register. With this change in place 'WR_READY timeout' messages do not show anymore. Signed-off-by:
Max Filippov <jcmvbkbc@gmail.com> Acked-by:
Christian Lamparter <chunkeey@web.de> Signed-off-by:
-
Bob Copeland authored
This adds support for the LEDs on the Jupiter netbook. Reported-by:
Martin Bammer <mrb74@gmx.at> Signed-off-by:
Bob Copeland <me@bobcopeland.com> Signed-off-by:
-
Anna Neal authored
Currently, the libertas main thread contends with the spi driver thread in the TX path. To improve throughput, ensure that the driver thread has higher scheduling priority than the libertas main thread. Do this by making the libertas spi driver thread a low priority real time thread. We measured an average throughput improvement of 13%. Signed-off-by:
Anna Neal <anna@cozybit.com> Signed-off-by:
Andrey Yurovsky <andrey@cozybit.com> Signed-off-by:
-
Wey-Yi Guy authored
This patch adding few more debug messages if encounter error when driver try to start tx aggregation queue. Also change from IWL_ERR to IWL_DEBUG_HT is the HW legacy queue is empty when driver request to move to aggregation queue. Signed-off-by:
Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by:
-
Wey-Yi Guy authored
Separated the MIMO tpt matrix into MIMO2 and MIMO3, adding MIMO3 support in rate scaling algorithm. If the device support 3x3, then utilize all three antenna (A/B/C) for tx to improve throughput. Adding rs_switch_to_mimo3() function to allow switch to mimo3 modulation mode from other modes(legacy/siso/mimo2). Adding rs_move_mimo3_to_other() function to allow switch from mimo3 modulation mode to either siso or mimo2; also support toggle between SGI and NGI. Signed-off-by:
-
Wey-Yi Guy authored
Adding ht triple_stream_basic_rates for MIMO3 supports Signed-off-by:
-
Fabio Rossi authored
When the EEPROM contains weird values for the power levels we have to fix the interpolation process. Signed-off-by:
Fabio Rossi <rossi.f@inwind.it> Acked-by:
Nick Kossifidis <mickflemm@gmail.com> Signed-off-by:
-
Larry Finger authored
Auto-depend on HW_RANDOM, rather than "select"ing it. This way the user has the choice to enable or disable HWRNG support. Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
-
Johannes Berg authored
This patch introduces a new attribute for a wiphy that tells userspace how long the information elements added to a probe request frame can be at most. It also updates the at76 to advertise that it cannot support that, and, for now until I can fix that, iwlwifi too. Signed-off-by:
Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
-
Luis R. Rodriguez authored
drivers/net/wireless/ath/ath5k/led.c:81:6: warning: symbol 'ath5k_led_on' was not declared. Should it be static? Signed-off-by:
Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by:
-
Luis R. Rodriguez authored
Signed-off-by:
-
Luis R. Rodriguez authored
Signed-off-by:
-
Christian Lamparter authored
Signed-off-by:
-
Bob Copeland authored
Make ath5k select the ath module and add in the hooks to make the eeprom regulatory hint and reg notifier take effect. Changes to attach.c Changes-licensed-under: ISC Changes to base.c Changes-licensed-under: 3-Clause-BSD Signed-off-by:
-
Bob Copeland authored
Setup the wiphy regulatory parameters when first initializing the Atheros regulatory module. We can remove five exported symbols this way and simplify the driver code for both ath5k and ath9k. Signed-off-by:
-
Bob Copeland authored
This change creates a new module, ath.ko, which includes code that can be shared between ath5k, ath9k and ar9170. For now, extract most of the ath9k regulatory code so it can also be used in ath5k. Signed-off-by:
-
Bob Copeland authored
All regulatory information is encapsulated by the ath9k_regulatory struct, so we can now change all the callers to take that directly instead of struct ath_hw. This in turn will enable us to move the regulatory functions to common code also used by ath5k, since both can use this regulatory struct. Signed-off-by:
-
Bob Copeland authored
Until ath5k and ath9k share common channel structures, they will have to implement their own get_ctl() function. Split out the portion that only relies on the current band and reg domain so that it can be common code. Signed-off-by:
-
Reinette Chatre authored
The STATUS_ALIVE value cannot be used because it is cleared when interface is brought down and will not be set if rfkill is enabled when interface is started again. The interface can thus not be brought up if rfkill was enabled before stopping the interface and disabled after starting the interface. Change the test to use priv->is_open instead, this will be set when interface is started whether rfkill is enabled or not. Thanks to Helmut Schaa for the suggested fix. Signed-off-by:
Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by:
-
Jussi Kivilinna authored
Convert scan function to cfg80211. Unlike old scan code new code waits 1 sec before getting scan data from device and passing forward to cfg80211. Signed-off-by:
Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by:
-
Jussi Kivilinna authored
Signed-off-by:
-
Jussi Kivilinna authored
Change quality level scale to match cfg80211 CFG80211_SIGNAL_TYPE_UNSPEC. Signed-off-by:
-
John W. Linville authored
Signed-off-by:
-
