- 26 Feb, 2011 1 commit
-
-
Wey-Yi Guy authored
No functional changes, name changes to reflect the structure used by 6000 series. Signed-off-by:Wey-Yi Guy <wey-yi.w.guy@intel.com>
-
- 31 Jan, 2011 2 commits
-
-
Wey-Yi Guy authored
During the period of BT coex changes, REPLY_BT_COEX_SCO host command is no longer needed to support SCO/eSCO type of traffic. delete it. Signed-off-by: -
Johannes Berg authored
The beacon notification changed between 4965 and agn because the embedded TX response changed, but iwlwifi was never updated to know about this. Update it now so the IBSS manager status will be tracked correctly. Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
- 21 Jan, 2011 2 commits
-
-
Johannes Berg authored
There are a number of places where the minimum slot time is hardcoded to 20 TU, add a new constant for that and use it everywhere. Signed-off-by:
-
Johannes Berg authored
Previously I hacked this with an msleep(300) which was fine since we never had longer PAN time slots, but now that we will have them I need to fix that. Use the new notification wait support to properly wait for the WIPAN deactivation complete signal from the ucode. Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
- 24 Nov, 2010 4 commits
-
-
Wey-Yi Guy authored
use different kill_ack_mask and kill_cts_mask when detect SCO is active. Signed-off-by: -
Wey-Yi Guy authored
For 6000g2b and up, adding advance power management support for better power consumption Signed-off-by:
-
Wey-Yi Guy authored
Adding additional power management option available for the device. Signed-off-by:
-
Wey-Yi Guy authored
Bit 7 of BT config flag is used to enable/disable PSPoll sync. Make the name to match it. Signed-off-by:
-
- 16 Nov, 2010 3 commits
-
-
Wey-Yi Guy authored
Change the default BT_KILL_ACK_MASK and BT_KILL_CTS_MASK for BT coex Signed-off-by: -
Wey-Yi Guy authored
Setting the max/min/def value for BT dynamic aggregation threshold. Signed-off-by: -
Wey-Yi Guy authored
For newer devices, uCode provide both "number of frames sent" and "number of frames acked" information inside the compressed_ba packet. So instead of figure the success/failure information through the bitmap, use those information which is much betrer approach. Signed-off-by:
-
- 07 Oct, 2010 2 commits
-
-
Shanyu Zhao authored
6000g2 devices need to have temperature offset calibration. The runtime uCode needs to receive the calibration results just like BB and LO calibration. To do this, driver reads the offset value from NVM and send it to uCode after runtime uCode is alive. Signed-off-by:
Shanyu Zhao <shanyu.zhao@intel.com> Signed-off-by:
-
Shanyu Zhao authored
iwlagn driver uses the IWL_MAX_STANDARD_PHY_CALIBRATE_TBL_SIZE as the chain noise reset calibration index and IWL_MAX_STANDARD_PHY_CALIBRATE_TBL_SIZE+1 as the chain noise gain calibration index, if not specified by the TLV value in the new firmware format. However, this is broken if we need to add more calibrations like the temperature offset calibration because we increased IWL_MAX_STANDARD_PHY_CALIBRATE_TBL_SIZE by 1. To fix this issue, define IWL_DEFAULT_STANDARD_PHY_CALIBRATE_TBL_SIZE and use it as the calibration index instead. We still keep the IWL_MAX_STANDARD_PHY_CALIBRATE_TBL_SIZE as a sanity check for the TLV value given by ucode. Signed-off-by:
-
- 06 Oct, 2010 3 commits
-
-
Wey-Yi Guy authored
iwl5000_tx_resp really should be iwlagn_tx_resp, rename it. Signed-off-by: -
Wey-Yi Guy authored
some structure belong to _agn devices, not just 5000. Fix it. Signed-off-by: -
Wey-Yi Guy authored
iwl5000_tx_power_dbm_cmd really should be iwlagn_tx_power_dbm_cmd, so rename it. Signed-off-by:
-
- 28 Sep, 2010 1 commit
-
-
Shanyu Zhao authored
Since uCode is responsible for doing DC calibration, there's no need to let init uCode to do initial DC calibration then send results back to driver, then driver sends the results to runtime uCode. Driver can simply tell runtime uCode to do DC calibration. Actually, this patch does not disable DC calib for init uCode. It just prevent driver from saving and sending the DC calib results (from init ucode) to runtime uCode. The driver still uses 0xffffffff in CALIB_CFG_CMD for init ucode. Signed-off-by:
-
- 17 Sep, 2010 3 commits
-
-
Wey-Yi Guy authored
Adding two new parameters in config bt API. these two parameters use the 3 reserved bytes, so there is no structure size changes. Make sure set both parameters to "zero" in order to preserve previous behavior. Signed-off-by: -
Wey-Yi Guy authored
For failure tx status 0x90 and 0x91, give the correct name to reflect the errors. Signed-off-by: -
Wey-Yi Guy authored
For aggregated frames with block ack, different status flag will be used as part of tx command response. Signed-off-by:
-
- 27 Aug, 2010 2 commits
-
-
Johannes Berg authored
Define the new host commands and notifications REPLY_WIPAN_PARAMS REPLY_WIPAN_RXON REPLY_WIPAN_RXON_TIMING REPLY_WIPAN_RXON_ASSOC REPLY_WIPAN_QOS_PARAM REPLY_WIPAN_WEPKEY REPLY_WIPAN_P2P_CHANNEL_SWITCH REPLY_WIPAN_NOA_NOTIFICATION and their corresponding structures along with the PAN station flag, the PAN AP sta ID and new dev types for the second context. Signed-off-by:
-
Johannes Berg authored
HW crypto needs to be aware of the context, and there are different command IDs for the WEP keys per context, so move the key tracking variables and command IDs into the context structure. Signed-off-by:
-
- 25 Aug, 2010 10 commits
-
-
Wey-Yi Guy authored
Update bt status upon receive scan complete notification Signed-off-by:
-
Wey-Yi Guy authored
Move bt coex functions to iwl-agn-lib.c, so those functions can be shared by multiple wifi/bt combo devices Signed-off-by:
-
Wey-Yi Guy authored
Add additional bt coex related parameters and initialize at init time. Thoese parameters will be used in later implementations. Signed-off-by:
-
Wey-Yi Guy authored
1. Based on uart message from uCode, re-configure BT kill ack mask messages from uCode 2. send REPLY_BT_COEX_SCO command to uCode based on the uart frame received from uCode Signed-off-by:
-
Wey-Yi Guy authored
Use .cfg to configure the default bt priority boost value; the default bt priority boost is 0xf0 Signed-off-by:
-
Wey-Yi Guy authored
bt config command need to send before the init calibration command, driver need to let uCode know that calibrations are being performed now in order to assure antenna is not being taken to BT use during radio/dsp reads/writes Also, bt_coex_priorty_table command need to be send right after the bt_config_command during init sequence. Followed by bt coex envelope command to initialize and prepare uCode bt state machine Signed-off-by:
-
Johannes Berg authored
When advanced bt coex enabled, uCode will send bt status notification to driver, here add support for it. Signed-off-by:
-
Johannes Berg authored
6000g2b hardware implements advance bluetooth coexist command, implement base on the new API command strucutre. Also increment the API 5 to support the advance BT/WIfi coex. Signed-off-by:
-
Johannes Berg authored
The new 6000g2b hardware requires a different bluetooth coexist implementation on the host, this adds the command/notification definitions for it. Signed-off-by:
-
Wey-Yi Guy authored
No code or function changes, just some cleanup work for out-of-date comments Signed-off-by:
-
- 24 Aug, 2010 4 commits
-
-
Wey-Yi Guy authored
Change the define to more generic naming to match _agn devices since the rssi calculation are common function for 5000 series and up Signed-off-by: -
Wey-Yi Guy authored
Adding additional parameter in REPLY_RX_PHY_CMD, frame_time indicate the frame's time on the air based on byte count and frame rate calculation Signed-off-by: -
Wey-Yi Guy authored
By default, aggregation time limit is 4000 uSec, add the parameter to .cfg to allow this parameter can be configure per device base if needed. Signed-off-by: -
Wey-Yi Guy authored
Set the minimum and maximum for aggregation time limit in uSec. Signed-off-by:
-
- 16 Aug, 2010 1 commit
-
-
Johannes Berg authored
Only the IBSS manager, ie. the station that sent the IBSS beacon last, should be replying to probe responses. This requires implementing the mac80211 tx_last_beacon callback, which we can do thanks to the ucode beacon notification. Signed-off-by:
-
- 26 Jul, 2010 1 commit
-
-
John W. Linville authored
"iwlagn: add statistic notification structure for WiFi/BT devices" added several new '__attribute__ ((packed))' lines. Change them to the generic __packed. Signed-off-by:
-
- 23 Jul, 2010 1 commit
-
-
Johannes Berg authored
defines shouldn't be terminated with a semicolon, the code using them should supply it. Luckily these are not used in a context where it matters. Signed-off-by:
-
