1. 14 Oct, 2011 1 commit
  2. 11 Oct, 2011 6 commits
  3. 03 Oct, 2011 1 commit
  4. 30 Sep, 2011 8 commits
  5. 14 Sep, 2011 2 commits
  6. 13 Sep, 2011 2 commits
  7. 22 Aug, 2011 1 commit
  8. 09 Aug, 2011 1 commit
  9. 13 Jul, 2011 1 commit
    • Johannes Berg's avatar
      mac80211: allow driver to disconnect after resume · 95acac61
      Johannes Berg authored
      In WoWLAN, devices may use crypto keys for TX/RX
      and could also implement GTK rekeying. If the
      driver isn't able to retrieve replay counters and
      similar information from the device upon resume,
      or if the device isn't responsive due to platform
      issues, it isn't safe to keep the connection up
      as GTK rekey messages from during the sleep time
      could be replayed against it.
      The only protection against that is disconnecting
      from the AP. Modifying mac80211 to do that while
      it is resuming would be very complex and invasive
      in the case that the driver requires a reconfig,
      so do it after it has resumed completely. In that
      case, however, packets might be replayed since it
      can then only happen after TX/RX are up again, so
      mark keys for interfaces that need to disconnect
      as "tainted" and drop all packets that are sent
      or received with those keys.
      Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
      Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
  10. 05 Jul, 2011 1 commit
  11. 06 Jun, 2011 1 commit
  12. 16 May, 2011 1 commit
    • Johannes Berg's avatar
      mac80211: sparse RCU annotations · 40b275b6
      Johannes Berg authored
      This adds sparse RCU annotations to most of
      mac80211, only the mesh code remains to be
      Due the the previous patches, the annotations
      are pretty simple. The only thing that this
      actually changes is removing the RCU usage of
      key->sta in debugfs since this pointer isn't
      actually an RCU-managed pointer (it only has
      a single assignment done before the key even
      goes live). As that is otherwise harmless, I
      decided to make it part of this patch.
      Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
      Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
  13. 11 May, 2011 1 commit
  14. 10 May, 2011 1 commit
  15. 05 May, 2011 1 commit
  16. 28 Apr, 2011 1 commit
  17. 26 Apr, 2011 1 commit
    • Rajkumar Manoharan's avatar
      mac80211: Fix warnings due to -Wunused-but-set-variable · 0915cba3
      Rajkumar Manoharan authored
      These warnings are exposed by gcc 4.6.
      net/mac80211/sta_info.c: In function 'sta_info_cleanup_expire_buffered':
      net/mac80211/sta_info.c:590:32: warning: variable 'sdata' set but not used
      net/mac80211/ibss.c: In function 'ieee80211_rx_mgmt_auth_ibss':
      net/mac80211/ibss.c:43:34: warning: variable 'status_code' set but not used
      net/mac80211/work.c: In function 'ieee80211_send_assoc':
      net/mac80211/work.c:203:9: warning: variable 'len' set but not used
      net/mac80211/tx.c: In function '__ieee80211_parse_tx_radiotap':
      net/mac80211/tx.c:1039:35: warning: variable 'sband' set but not used
      net/mac80211/mesh.c: In function 'ieee80211_mesh_rx_queued_mgmt':
      net/mac80211/mesh.c:616:28: warning: variable 'ifmsh' set but not used
      Signed-off-by: default avatarRajkumar Manoharan <rmanoharan@atheros.com>
      Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
  18. 12 Apr, 2011 1 commit
  19. 25 Feb, 2011 1 commit
    • Johannes Berg's avatar
      mac80211: make tx() operation return void · 7bb45683
      Johannes Berg authored
      The return value of the tx operation is commonly
      misused by drivers, leading to errors. All drivers
      will drop frames if they fail to TX the frame, and
      they must also properly manage the queues (if they
      didn't, mac80211 would already warn).
      Removing the ability for drivers to return a BUSY
      value also allows significant cleanups of the TX
      TX handling code in mac80211.
      Note that this also fixes a bug in ath9k_htc, the
      old "return -1" there was wrong.
      Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
      Tested-by: Sedat Dilek <sedat.dilek@googlemail.com> [ath5k]
      Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> [rt2x00]
      Acked-by: Larry Finger <Larry.Finger@lwfinger.net> [b43, rtl8187, rtlwifi]
      Acked-by: Luciano Coelho <coelho@ti.com> [wl12xx]
      Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
  20. 18 Feb, 2011 1 commit
  21. 07 Feb, 2011 2 commits
  22. 04 Feb, 2011 2 commits
    • Ben Greear's avatar
      mac80211: Optimize scans on current operating channel. · b23b025f
      Ben Greear authored
      This should decrease un-necessary flushes, on/off channel work,
      and channel changes in cases where the only scanned channel is
      the current operating channel.
        and is-scanning flags instead.
      * Add helper method to determine if we are currently configured
        for the operating channel.
      * Do no blindly go off/on channel in work.c  Instead, only call
        appropriate on/off code when we really need to change channels.
        Always enable offchannel-ps mode when starting work,
        and disable it when we are done.
      * Consolidate ieee80211_offchannel_stop_station and
        ieee80211_offchannel_stop_beaconing, call it
        ieee80211_offchannel_stop_vifs instead.
      * Accept non-beacon frames when scanning on operating channel.
      * Scan state machine optimized to minimize on/off channel
        transitions.  Also, when going on-channel, go ahead and
        re-enable beaconing.  We're going to be there for 200ms,
        so seems like some useful beaconing could happen.
        Always enable offchannel-ps mode when starting software
        scan, and disable it when we are done.
      * Grab local->mtx earlier in __ieee80211_scan_completed_finish
        so that we are protected when calling hw_config(), etc.
      * Pass probe-responses up the stack if scanning on local
        channel, so that mlme can take a look.
      Signed-off-by: default avatarBen Greear <greearb@candelatech.com>
      Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
    • Christian Lamparter's avatar
      mac80211: fix race between next beacon dtim and ieee80211_get_buffered_bc · 512119b3
      Christian Lamparter authored
      On review of 'zd1211rw: implement beacon fetching and handling
      ieee80211_get_buffered_bc()', Christian Lamparter noted that [1]:
         Since zd_beacon_done also uploads the next beacon so long in advance,
         there could be an equally long race between the outdated state of the
         next beacon's DTIM broadcast traffic indicator (802.11-2007
         which -in your case- was uploaded almost a beacon interval ago and
         the xmit of ieee80211_get_buffered_bc *now*.
         The dtim bc/mc bit might be not set, when a mc/bc arrived after the
         beacon was uploaded, but before the "beacon done event" from the
         hardware. So, dozing stations don't expect the broadcast traffic
         and of course, they might miss it completely.
         It's probably better to fix this in mac80211 (see the attached hack).
      [1] http://marc.info/?l=linux-wireless&m=129435041117256&w=2
      CC: Christian Lamparter <chunkeey@googlemail.com>
      Signed-off-by: default avatarJussi Kivilinna <jussi.kivilinna@mbnet.fi>
      Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
  23. 03 Feb, 2011 1 commit
    • Arik Nemtsov's avatar
      mac80211: do not calc frame duration when using HW rate-control · 8fd369ee
      Arik Nemtsov authored
      When rate-control is performed in HW, we cannot calculate frame
      duration as we do not have the skb transmission rate in SW.
      ieee80211_tx_h_calculate_duration() should only be called when
      ieee80211_tx_h_rate_ctrl() has been called before to initialize data
      in skb->cb. This doesn't happen for drivers with HW rate-control.
      Fixes the following warning when operating in AP-mode
      in a driver with HW rate-control.
      WARNING: at net/mac80211/tx.c:57 ieee80211_duration+0x54/0x1d8 [mac80211]()
      Modules linked in: wl1271_sdio wl1271 firmware_class crc7 mac80211 cfg80211
      [<c0046090>] (unwind_backtrace+0x0/0x124) from [<c0064c10>] (warn_slowpath_common+0x4c/0x64)
      [<c0064c10>] (warn_slowpath_common+0x4c/0x64) from [<c0064c40>] (warn_slowpath_null+0x18/0x1c)
      [<c0064c40>] (warn_slowpath_null+0x18/0x1c) from [<bf040e34>] (ieee80211_duration+0x54/0x1d8 [mac80211])
      [<bf040e34>] (ieee80211_duration+0x54/0x1d8 [mac80211]) from [<bf04200c>] (invoke_tx_handlers+0xfa0/0x1088 [mac80211])
      [<bf04200c>] (invoke_tx_handlers+0xfa0/0x1088 [mac80211]) from [<bf042178>] (ieee80211_tx+0x84/0x248 [mac80211])
      [<bf042178>] (ieee80211_tx+0x84/0x248 [mac80211]) from [<bf042f44>] (ieee80211_tx_pending+0x12c/0x278 [mac80211])
      [<bf042f44>] (ieee80211_tx_pending+0x12c/0x278 [mac80211]) from [<c0069a9c>] (tasklet_action+0x68/0xbc)
      [<c0069a9c>] (tasklet_action+0x68/0xbc) from [<c006a044>] (__do_softirq+0x84/0x114)
      [<c006a044>] (__do_softirq+0x84/0x114) from [<c006a1b8>] (do_softirq+0x48/0x54)
      [<c006a1b8>] (do_softirq+0x48/0x54) from [<c006a4f8>] (local_bh_enable+0x98/0xcc)
      [<c006a4f8>] (local_bh_enable+0x98/0xcc) from [<bf074e60>] (wl1271_rx+0x2e8/0x3a4 [wl1271])
      [<bf074e60>] (wl1271_rx+0x2e8/0x3a4 [wl1271]) from [<bf071ae4>] (wl1271_irq_work+0x230/0x310 [wl1271])
      [<bf071ae4>] (wl1271_irq_work+0x230/0x310 [wl1271]) from [<c0076864>] (process_one_work+0x208/0x350)
      [<c0076864>] (process_one_work+0x208/0x350) from [<c0076e14>] (worker_thread+0x1cc/0x300)
      [<c0076e14>] (worker_thread+0x1cc/0x300) from [<c007bb88>] (kthread+0x84/0x8c)
      [<c007bb88>] (kthread+0x84/0x8c) from [<c0041494>] (kernel_thread_exit+0x0/0x8)
      Signed-off-by: default avatarArik Nemtsov <arik@wizery.com>
      Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
  24. 25 Jan, 2011 1 commit