1. 26 Nov, 2012 2 commits
    • Johannes Berg's avatar
      mac80211: convert to channel definition struct · 4bf88530
      Johannes Berg authored
      
      
      Convert mac80211 (and where necessary, some drivers a
      little bit) to the new channel definition struct.
      
      This will allow extending mac80211 for VHT, which is
      currently restricted to channel contexts since there
      are no drivers using that which makes it easier. As
      I also don't care about VHT for drivers not using the
      channel context API, I won't convert the previous API
      to VHT support.
      Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
      4bf88530
    • Johannes Berg's avatar
      mac80211: fix managed mode channel flags handling · 028e8da0
      Johannes Berg authored
      
      
      If ieee80211_prep_channel() decides that HT should be
      disabled (because the HT IEs from the AP were invalid)
      it will set the IEEE80211_STA_DISABLE_HT to not send
      HT capabilities to the AP when associating. If this
      happens during authentication, the flag will be lost
      and we send HT frames, even if the channel config was
      set up for non-HT. This can lead to issues.
      
      Fix this by always resetting the ifmgd flags to zero
      when the channel context is released so that the flag
      resetting in ieee80211_mgd_assoc() isn't necessary.
      
      To make the code a bit easier move the call to release
      the channel in ieee80211_set_disassoc() to the end of
      the function together with the flag resetting (which
      needs to be at the end to avoid timers setting flags.)
      Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
      028e8da0
  2. 23 Nov, 2012 3 commits
    • Johannes Berg's avatar
      mac80211: disable HT advertising unless AP supports it · 03ae834f
      Johannes Berg authored
      
      
      If the AP doesn't support HT, or more importantly if
      it does but we have to disable it because its IEs are
      broken, don't advertise HT support in our association
      request. Otherwise, we configure our channel to be a
      20 MHz non-HT channel but the AP might still think we
      support HT, or even 40 MHz.
      Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
      03ae834f
    • Johannes Berg's avatar
      mac80211: rename IEEE80211_STA_DISABLE_11N to HT · a8243b72
      Johannes Berg authored
      
      
      Since the 11n spec amendment was rolled into the
      2012 version, "11n" no longer makes sense. Use
      "HT" instead.
      Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
      a8243b72
    • Johannes Berg's avatar
      mac80211: fix RX chains configuration · 76c5fa0f
      Johannes Berg authored
      
      
      If the driver doesn't support 40 MHz channels, then
      mac80211 erroneously sets number of RX chains to one
      although the number of chains is independent of the
      support for 40 MHz channels.
      
      Fix this by checking the 40 MHz support only for the
      code that sets the 40 MHz channel not the complete
      HT code block.
      
      This also means the HT20 channel type will always be
      set in the changed code block so there's no need to
      set it in case we override the AP due to invalid IEs
      in the probe response/beacon.
      
      The indentation is a bit quirky, but I'm rewriting
      this code for VHT support so this will change again
      very soon.
      Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
      76c5fa0f
  3. 06 Nov, 2012 1 commit
  4. 05 Nov, 2012 1 commit
    • Johannes Berg's avatar
      mac80211: send deauth only with channel context · 86552017
      Johannes Berg authored
      
      
      When userspace asks to deauthenticate and we're just
      authenticated (or still authenticating) send a deauth
      frame instead of deleting the auth request.
      
      On the other hand, if we've just disassociated and
      therefore deleted all our state already, drop the
      deauth request because we no longer have a channel
      context to send it on.
      Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
      86552017
  5. 30 Oct, 2012 1 commit
    • Johannes Berg's avatar
      mac80211: handle TX power per virtual interface · 1ea6f9c0
      Johannes Berg authored
      
      
      Even before channel contexts/multi-channel, having a
      single global TX power limit was already problematic,
      in particular if two managed interfaces connected to
      two APs with different power constraints. The channel
      context introduction completely broke this though and
      in fact I had disabled TX power configuration there
      for drivers using channel contexts.
      
      Change everything to track TX power per interface so
      that different user settings and different channel
      maxima are treated correctly. Also continue tracking
      the global TX power though for compatibility with
      applications that attempt to configure the wiphy's
      TX power globally.
      Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
      1ea6f9c0
  6. 25 Oct, 2012 1 commit
  7. 18 Oct, 2012 1 commit
  8. 17 Oct, 2012 8 commits
  9. 15 Oct, 2012 1 commit
  10. 21 Sep, 2012 1 commit
  11. 14 Sep, 2012 2 commits
  12. 07 Sep, 2012 1 commit
  13. 06 Sep, 2012 2 commits
  14. 04 Sep, 2012 1 commit
  15. 20 Aug, 2012 6 commits
  16. 01 Aug, 2012 2 commits
  17. 31 Jul, 2012 6 commits
    • Johannes Berg's avatar
      mac80211: fix current vs. operating channel in preq/beacon · 6b77863b
      Johannes Berg authored
      
      
      When sending probe requests, e.g. during software scanning,
      these will go out on the *current* channel, so their IEs
      need to be built from the current channel. At other times,
      e.g. for beacons or probe request templates, the IEs will
      be used on the *operating* channel and using the current
      channel instead might result in errors.
      
      Add the appropriate parameters to respect the difference.
      Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
      6b77863b
    • Johannes Berg's avatar
      mac80211: use oper_channel in managed mlme · 568d6e28
      Johannes Berg authored
      
      
      Using hw.conf.channel is wrong as it could be the
      temporary channel if any function like the beacon
      get function is called while scanning or during
      other temporary out-of-channel activities.
      
      Use oper_channel instead.
      Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
      568d6e28
    • Johannes Berg's avatar
      mac80211: set channel only once during auth/assoc · b17166a7
      Johannes Berg authored
      
      
      There's no need to set up the channel during auth
      and again during assoc, just do it once. Currently
      this doesn't result in any changes since calling
      hw_config() with an unchanged channel will return
      early, but with the channel context work this has
      an impact on channel context assignment.
      Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
      b17166a7
    • Johannes Berg's avatar
      mac80211: rename sta to new_sta · 13e0c8e3
      Johannes Berg authored
      
      
      In ieee80211_prep_connection(), the station (if not NULL)
      is the new station (representing the AP) that needs to be
      added. Rename the variable to "new_sta" to clarify this.
      Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
      13e0c8e3
    • Johannes Berg's avatar
      mac80211: supress HT/VHT disable if not supported · 1b49de26
      Johannes Berg authored
      
      
      If HT/VHT isn't supported by us we shouldn't print
      a message that we disabled it, do that only if the
      AP didn't support WMM and we therefore disable it.
      Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
      1b49de26
    • Eliad Peller's avatar
      mac80211: add PS flag to bss_conf · ab095877
      Eliad Peller authored
      
      
      Currently, ps mode is indicated per device (rather than
      per interface), which doesn't make a lot of sense.
      
      Moreover, there are subtle bugs caused by the inability
      to indicate ps change along with other changes
      (e.g. when the AP deauth us, we'd like to indicate
      CHANGED_PS | CHANGED_ASSOC, as changing PS before
      notifying about disassociation will result in null-packets
      being sent (if IEEE80211_HW_SUPPORTS_DYNAMIC_PS) while
      the sta is already disconnected.)
      
      Keep the current per-device notifications, and add
      parallel per-vif notifications.
      
      In order to keep it simple, the per-device ps and
      the per-vif ps are orthogonal - the per-vif ps
      configuration is determined only by the user
      configuration (enable/disable) and the connection
      state, and is not affected by other vifs state and
      (temporary) dynamic_ps/offchannel operations
      (unlike per-device ps).
      Signed-off-by: default avatarEliad Peller <eliad@wizery.com>
      Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
      ab095877