- 28 Apr, 2010 2 commits
-
-
Ben Hutchings authored
Signed-off-by:
Ben Hutchings <bhutchings@solarflare.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Steve Hodgson authored
'Fatal' errors set an interrupt flag associated with a specific event queue; only read the syndrome vector if we see that queue's flag set (legacy interrupts) or in the interrupt handler for that queue (MSI). Do not ignore an interrupt if the fatal error flag is set but specific error flags are all zero. Even if we don't schedule a reset, we must respect the queue mask and rearm the appropriate event queues. Signed-off-by:
-
- 03 Feb, 2010 3 commits
-
-
Ben Hutchings authored
Earlier refactoring has made these inclusions unnecessary. Signed-off-by:
-
Ben Hutchings authored
In particular, the comment about EVQ_RPTR_REG is based on inconsistent preliminary hardware documentation, though the following code was fixed long before release. Signed-off-by:
-
Ben Hutchings authored
SFC9000-family boards do not all use MDIO PHYs, so we need a different test for PHY aliveness. Introduce a PHY operation test_alive(). For PHYs attached to Falcon, use a common implementation based on the existing PHY MDIO test. For PHYs managed through MCDI, use the appropriate MCDI request. Change test name in ethtool from 'core mdio' to 'phy alive'. Rename test_results::mdio to phy_alive and test_results::phy to phy_ext. Signed-off-by:
-
- 23 Dec, 2009 1 commit
-
-
Steve Hodgson authored
This prevents efx->link_advertising from being blatted during a reset. The phy_short_reach sysfs node is now destroyed later in the port shutdown process, so check for STATE_RUNNING after acquiring the rtnl_lock (just like in set_phy_flash_cfg). Signed-off-by:
-
- 29 Nov, 2009 20 commits
-
-
Ben Hutchings authored
This driver has been mostly rewritten since Michael Brown's initial work, so swap the order of the authors. Signed-off-by:
-
Ben Hutchings authored
This integrates support for the SFC9000 family of 10G Ethernet controllers and LAN-on-motherboard chips, starting with the SFL9021 'Siena' and SFC9020 'Bethpage'. Credit for this code is largely due to my colleagues at Solarflare: Guido Barzini Steve Hodgson Kieran Mansley Matthew Slattery Neil Turton Signed-off-by:
-
Ben Hutchings authored
Signed-off-by:
-
Ben Hutchings authored
In new NICs flash is managed by firmware and we will use high-level operations on partitions rather than direct SPI commands. Add support for multiple MTD partitions per flash device and remove the direct link between MTD and SPI devices. Maintain a list of MTD partitions in struct efx_nic. Signed-off-by:
-
Ben Hutchings authored
New NICs have firmware managing the PHY, and we will discover the PHY capabilities at run-time. Replace the static data with probe() and test_name() operations. Signed-off-by:
-
Ben Hutchings authored
New NICs and PHYs support a wider variety of loopback modes. Signed-off-by:
-
Ben Hutchings authored
Signed-off-by:
-
Ben Hutchings authored
Signed-off-by:
-
Ben Hutchings authored
Signed-off-by:
-
Ben Hutchings authored
Refactor efx_reset_down() and efx_reset_up() accordingly. Signed-off-by:
-
Ben Hutchings authored
Wake-on-LAN is a stub for Falcon, but will be implemented fully for new NICs. Signed-off-by:
-
Ben Hutchings authored
Refactor PHY, MAC and NIC configuration operations so that the existing link configuration can be re-pushed with: efx->phy_op->reconfigure(efx); efx->mac_op->reconfigure(efx); and a new configuration with: efx->nic_op->reconfigure_port(efx); (plus locking and error-checking). We have not held the link settings in software (aside from flow control), and have relied on asking the hardware what they are. This is a problem because in some cases the hardware may no longer be in a state to tell us. In particular, if an entire multi-port board is reset through one port, the driver bindings to other ports have no chance to save settings before recovering. We only actually need to keep track of the autonegotiation settings, so add an ethtool advertising mask to struct efx_nic, initialise it in PHY init and update it as necessary. Remove now-unneeded uses of efx_phy_op::{get,set}_settings() and struct ethtool_cmd. Much of this was done by Steve Hodgson <shodgson@solarflare.com>. Signed-off-by: -
Ben Hutchings authored
This is preparation for adding differing implementations for new NICs. Signed-off-by:
-
Ben Hutchings authored
Add 'likely' hint to test of rx_checksum_enabled. Don't count IP fragments; the IP stack can do that. Do count non-matching multicast packets. Signed-off-by:
-
Ben Hutchings authored
Signed-off-by:
-
Ben Hutchings authored
Signed-off-by:
-
Ben Hutchings authored
Signed-off-by:
-
Steve Hodgson authored
The strap bits are only important on Falcon A and all production boards using it have fixed-speed 10G PHYs. Replace dummy MAC operations with default MAC operations. Signed-off-by:
-
Steve Hodgson authored
We never use MDIO in atomic context, so we don't need to spin. Signed-off-by:
-
Steve Hodgson authored
Falcon can generate events for LASI interrupts from the PHY, but in practice we have never implemented this in reference designs. Instead we have polled, inserted the appropriate events, and then handled the events later. This is a waste of time and code. Instead, make PHY poll functions update the link state synchronously and report whether it changed. We can still make use of the LASI registers as a shortcut on the SFT9001. Signed-off-by:
-
- 26 Nov, 2009 4 commits
-
-
Ben Hutchings authored
From: Steve Hodgson <shodgson@solarflare.com> Currently we can set multicast hash immediately (in atomic context) but must delay setting MAC promiscuity. There is not that much point in deferring one but not the other, and setting the multicast hash on Siena will involve a firmware request. So process them both in efx_mac_work(). Also, set the broadcast bit in the multicast hash in efx_set_multicast_list(), since this is required for both Falcon and Siena. Signed-off-by:
-
Ben Hutchings authored
From: Steve Hodgson <shodgson@solarflare.com> Only the XMAC on Falcon needs help from the driver to poll and reset the MAC-PHY link (XAUI); GMII is a simple parallel bus and on later NICs firmware takes care of the XAUI link. Also, an XMAC interrupt currently schedules a work item which simply clears a flag (efx_nic::mac_up) to be checked by the regular monitor (or the next link reconfiguration, if that is sooner). Rename the flag to xmac_poll_required, changing its sense. Remove the needless indirection and just set the flag immediately. Call falcon_xmac_poll() directly where required. Add a new generic operation mac_op::check_fault to check the link outside of regular monitoring, as required during self-tests. (Note that this leaves us with an unused work item, but we will immediately have another use for it.) Signed-off-by:
-
Ben Hutchings authored
From: Steve Hodgson <shodgson@solarflare.com> Currently we initiate MAC stats DMA and busy-wait for completion when stats are requested. We can improve on this with a periodic timer to initiate and poll for stats, and opportunistically poll when stats are requested. Since efx_nic::stats_disable_count and efx_stats_{disable,enable}() are Falcon-specific, rename them and move them accordingly. Signed-off-by: -
Ben Hutchings authored
Avoid overrunning the hardware limit of 4 concurrent RX queue flushes. Expand the queue flush state to support this. Make similar changes to TX flushing to keep the code symmetric. Signed-off-by:
-
- 24 Nov, 2009 8 commits
-
-
Ben Hutchings authored
Define name tables for these enumerations in a similar way as for loopback. Move the loopback name table together with them. Signed-off-by:
-
Ben Hutchings authored
Signed-off-by:
-
Ben Hutchings authored
Signed-off-by:
-
Ben Hutchings authored
Signed-off-by:
-
Ben Hutchings authored
Rename struct efx_board to struct falcon_board. Introduce and use inline function to look up board info from struct efx_nic, in preparation for moving it. Move board init and fini calls into NIC probe and remove functions. Signed-off-by:
-
Ben Hutchings authored
efx_board::init_leds was introduced as a second stage of initialisation because of the inter-dependency between the board and PHY. We want to move board initialisation into NIC probing, which is too early to use MDIO, so SFN4111T initialisation also needs to be split. Signed-off-by:
-
Ben Hutchings authored
Only some PHYs have firmware support for a LED blink mode, so we currently blink the others in a timer function. Since all PHYs have simple on and off modes, we don't gain anything by using multiple blink implementations. Also, since we have a process context there is no need to use a timer. Signed-off-by:
-
Ben Hutchings authored
Finish the job by removing the structure member. Signed-off-by:
-
- 24 Oct, 2009 2 commits
-
-
Ben Hutchings authored
efx_fc_resolve() is specific to MDIO and is not used by any other function. Signed-off-by:
-
Ben Hutchings authored
Signed-off-by:
-
