- 07 Apr, 2009 11 commits
-
-
Yang Hongyang authored
Replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32) Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Serge E. Hallyn authored
Largely inspired from ipc/ipc_sysctl.c. This patch isolates the mqueue sysctl stuff in its own file. [akpm@linux-foundation.org: build fix] Signed-off-by:
Cedric Le Goater <clg@fr.ibm.com> Signed-off-by:
Nadia Derbey <Nadia.Derbey@bull.net> Signed-off-by:
Serge E. Hallyn <serue@us.ibm.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
-
Serge E. Hallyn authored
Implement multiple mounts of the mqueue file system, and link it to usage of CLONE_NEWIPC. Each ipc ns has a corresponding mqueuefs superblock. When a user does clone(CLONE_NEWIPC) or unshare(CLONE_NEWIPC), the unshare will cause an internal mount of a new mqueuefs sb linked to the new ipc ns. When a user does 'mount -t mqueue mqueue /dev/mqueue', he mounts the mqueuefs superblock. Posix message queues can be worked with both through the mq_* system calls (see mq_overview(7)), and through the VFS through the mqueue mount. Any usage of mq_open() and friends will work with the acting task's ipc namespace. Any actions through the VFS will work with the mqueuefs in which the file was created. So if a user doesn't remount mqueuefs after unshare(CLONE_NEWIPC), mq_open("/ab") will not be reflected in "ls /dev/mqueue". If task a mounts mqueue for ipc_ns:1, then clones task b with a new ipcns, ipcns:2, and then task a is the last task in ipc_ns:1 to exit, then (1) ipc_ns:1 will be freed, (2) it's superblock will live on until task b umounts the corresponding mqueuefs, and vfs actions will continue to succeed, but (3) sb->s_fs_info will be NULL for the sb corresponding to the deceased ipc_ns:1. To make this happen, we must protect the ipc reference count when a) a task exits and drops its ipcns->count, since it might be dropping it to 0 and freeing the ipcns b) a task accesses the ipcns through its mqueuefs interface, since it bumps the ipcns refcount and might race with the last task in the ipcns exiting. So the kref is changed to an atomic_t so we can use atomic_dec_and_lock(&ns->count,mq_lock), and every access to the ipcns through ns = mqueuefs_sb->s_fs_info is protected by the same lock. Signed-off-by: -
Serge E. Hallyn authored
Move mqueue vfsmount plus a few tunables into the ipc_namespace struct. The CONFIG_IPC_NS boolean and the ipc_namespace struct will serve both the posix message queue namespaces and the SYSV ipc namespaces. The sysctl code will be fixed separately in patch 3. After just this patch, making a change to posix mqueue tunables always changes the values in the initial ipc namespace. Signed-off-by:
-
Serge E. Hallyn authored
The mqueuefs filesystem will use this helper as well. Proc's main get_sb could also be made to use it, but that will require a bit more rework. Signed-off-by:
-
Krzysztof Helt authored
The I2C functionality provided by the i2c-voodoo3 driver is moved into the tdfxfb (frame buffer driver for Voodoo3 cards). This way there is no conflict between the i2c driver and the fb driver. The tdfxfb does not make use from the DDC functionality yet but provides all the functionality of the i2c-voodoo3 driver. Signed-off-by:
Krzysztof Helt <krzysztof.h1@wp.pl> Acked-by:
Jean Delvare <khali@linux-fr.org> Signed-off-by:
-
Masami Hiramatsu authored
Add disable/enable_kretprobe() and disable/enable_jprobe(). Signed-off-by:
Masami Hiramatsu <mhiramat@redhat.com> Acked-by:
Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by:
-
Masami Hiramatsu authored
Add disable_kprobe() and enable_kprobe() to disable/enable kprobes temporarily. disable_kprobe() asynchronously disables probe handlers of specified kprobe. So, after calling it, some handlers can be called at a while. enable_kprobe() enables specified kprobe. aggr_pre_handler and aggr_post_handler check disabled probes. On the other hand aggr_break_handler and aggr_fault_handler don't check it because these handlers will be called while executing pre or post handlers and usually those help error handling. Signed-off-by:
-
Masami Hiramatsu authored
Fix comment style in kprobes.h. Signed-off-by:
-
Mike Rapoport authored
Some SPI controllers have restrictions on DMAable buffers alignemt. Currently if the buffer supplied by protocol driver is not properly aligned, the controller silently performs transfer in PIO mode. Addition of dma_alignment field to spi_master allows protocol drivers to perform proper alignment. Signed-off-by:
Mike Rapoport <mike@compulab.co.il> Cc: Bryan Wu <bryan.wu@analog.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by:
-
Peter W Morreale authored
Add /proc entries to give the admin the ability to control the minimum and maximum number of pdflush threads. This allows finer control of pdflush on both large and small machines. The rationale is simply one size does not fit all. Admins on large and/or small systems may want to tune the min/max pdflush thread count to best suit their needs. Right now the min/max is hardcoded to 2/8. While probably a fair estimate for smaller machines, large machines with large numbers of CPUs and large numbers of filesystems/block devices may benefit from larger numbers of threads working on different block devices. Even if the background flushing algorithm is radically changed, it is still likely that multiple threads will be involved and admins would still desire finer control on the min/max other than to have to recompile the kernel. The patch adds '/proc/sys/vm/nr_pdflush_threads_min' and '/proc/sys/vm/nr_pdflush_threads_max' with r/w permissions. The minimum value for nr_pdflush_threads_min is 1 and the maximum value is the current value of nr_pdflush_threads_max. This minimum is required since additional thread creation is performed in a pdflush thread itself. The minimum value for nr_pdflush_threads_max is the current value of nr_pdflush_threads_min and the maximum value can be 1000. Documentation/sysctl/vm.txt is also updated. [akpm@linux-foundation.org: fix comment, fix whitespace, use __read_mostly] Signed-off-by:
Peter W Morreale <pmorreale@novell.com> Reviewed-by:
Rik van Riel <riel@redhat.com> Signed-off-by:
-
- 06 Apr, 2009 29 commits
-
-
Adam Baker authored
Add support to the SQ-905 driver to pass back to user space the sensor orientation information obtained from the camera during init. Modifies gspca and the videodev2.h header to create the necessary API. [mchehab@redhat.com: Changed "Output is" to "Frames are" at the comments, as suggested at LMML] Signed-off-by:
Adam Baker <linux@baker-net.org.uk> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans Verkuil authored
Remove support for the debug call VIDIOC_INT_S_AUDIO_ROUTING from cx18 and ivtv. These internal ioctls shouldn't be exposed. These were only used through the cx18-ctl and ivtv-ctl utilities, and only when testing a new card variant. This cleanup allows the removal of this ioctl from v4l2-common.h. Cc: Andy Walls <awalls@radix.net> Signed-off-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
Hans Verkuil authored
It is no longer needed to use a struct pointer as argument, since v4l2_subdev doesn't require that ioctl-like approach anymore. Instead just pass the input, output and config (new!) arguments directly. Signed-off-by:
-
Hans Verkuil authored
With all the v4l2_subdev changes that were made to these drivers it is a good idea to increase the version number of each driver. It's just the patch level that is increased, except for the zoran and saa7146 drivers where the minor number was increased due to the more substantial changes that were made to those two drivers. Signed-off-by:
-
Hans Verkuil authored
Rather than duplicating this list everywhere, just put it in tvaudio.h. Signed-off-by:
-
Hans Verkuil authored
The functions v4l2_i2c_new_subdev and v4l2_i2c_new_probed_subdev relied on i2c_get_adapdata to return the v4l2_device. However, this is not always possible on embedded platforms. So modify the API to pass the v4l2_device pointer explicitly. Signed-off-by:
-
Hans Verkuil authored
Add utility function to probe for a single address, rather than a list of addresses. Signed-off-by:
-
Hans Verkuil authored
Originally the intention was to switch to the new style i2c API starting with the introduction of the API in 2.6.22. However, the i2c_new_probed_device() function has a lethal bug that wasn't fixed until 2.6.25. Or more accurately, it was only fixed in the stable series of 2.6.25 and 2.6.26. Given the fact that the new i2c API also changed starting with 2.6.26 (the addition of i2c_device_id), it is easiest to switch APIs starting with 2.6.26. This patch updates all the legacy code accordingly. Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
s_std didn't belong in the tuner ops. Stricly speaking it should be part of the video ops, but it is used by audio and tuner devices as well, so it is more efficient to make it part of the core ops. Signed-off-by:
-
Hans Verkuil authored
The init callback was used in several places to load firmware. Make a separate load_fw callback for that. This makes the code a lot more understandable. Signed-off-by:
-
Hans Verkuil authored
s_standby is only used to put the tuner in powersaving mode, so move it from core to tuner. Signed-off-by:
-
Hans Verkuil authored
Now that all drivers are converted to v4l2_subdev we can remove legacy code in v4l2-common. Also move the documentation of the internal API to v4l2-subdev.h where it really belongs. Signed-off-by:
-
Hans Verkuil authored
v4l2-subdev.c and v4l2-i2c-drv-legacy.h were used to support the old i2c API. All v4l drivers are now converted to v4l2_subdev, so these two files can be removed. Signed-off-by:
-
Sri Deevi authored
Signed-off-by:
Srinivasa Deevi <srinivasa.deevi@conexant.com> [mchehab@redhat.com: Remove the Kconfig changes, to avoid git breakages] Signed-off-by:
-
Kuninori Morimoto authored
Signed-off-by:
Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by:
-
Alexander Beregalov authored
Fixes: In file included from drivers/serial/mux.c:37: include/linux/serial_core.h: In function 'uart_handle_sysrq_char': include/linux/serial_core.h:467: error: 'struct uart_port' has no member named 'sysrq' include/linux/serial_core.h:468: error: 'struct uart_port' has no member named 'sysrq' Signed-off-by:
Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by:
Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by:
-
Will Page authored
Signed-off-by:
Will Page <will.page@ni.com> Signed-off-by:
Shawn Bohrer <shawn.bohrer@ni.com> Signed-off-by:
-
Shawn Bohrer authored
This implements basic support for all 843x RS232 devices, but does not add DMA support. This means that sustained data transfers at high baud rates may not be possible on multiple ports simultaneously. Signed-off-by:
-
Benny Halevy authored
Fixes following modpost error: ERROR: "nfsd4_set_statp" [fs/nfsd/nfsd.ko] undefined! Signed-off-by:
Benny Halevy <bhalevy@panasas.com> Signed-off-by:
J. Bruce Fields <bfields@citi.umich.edu>
-
Benny Halevy authored
Fixes the following compiler error: fs/nfsd/nfssvc.c: In function 'set_max_drc': fs/nfsd/nfssvc.c:240: error: 'NFSD_DRC_SIZE_SHIFT' undeclared CONFIG_NFSD_V4 is not set Reported-by:
-
Jean Delvare authored
The i2c-algo-sgi code was merged into the vino driver, so we can delete it now. Signed-off-by: -
Jean Delvare authored
Delete many unused I2C driver IDs. We should be able to get rid of i2c_driver.id pretty soon now. Signed-off-by: -
Jean Delvare authored
The new i2c binding model makes the client_register and client_unregister methods of struct i2c_adapter useless, so we can remove them with the rest of the legacy model. Signed-off-by: -
Kim Kyuwon authored
ROHM BD2802GU is a RGB LED controller attached to i2c bus and specifically engineered for decoration purposes. This RGB controller incorporates lighting patterns and illuminates. This driver is designed to minimize power consumption, so when there is no emitting LED, it enters to reset state. And because the BD2802GU has lots of features that can't be covered by the current LED framework, it provides Advanced Configuration Function(ADF) mode, so that user applications can set registers of BD2802GU directly. Here are basic usage examples : ; to turn on LED (not blink) $ echo 1 > /sys/class/leds/led1_R/brightness ; to blink LED $ echo timer > /sys/class/leds/led1_R/trigger $ echo 1 > /sys/class/leds/led1_R/delay_on $ echo 1 > /sys/class/leds/led1_R/delay_off ; to turn off LED $ echo 0 > /sys/class/leds/led1_R/brightness [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
Kim Kyuwon <chammoru@gmail.com> Signed-off-by:
Richard Purdie <rpurdie@linux.intel.com>
-
Richard Purdie authored
Add an option to preserve LED state when suspending/resuming to the LED gpio driver. Based on a suggestion from Robert Jarzmik. Tested-by:
Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by:
-
Luotao Fu authored
Add a simple driver for pwm driver LEDs. pwm_id and period can be defined in board file. It is developed for pxa, however it is probably generic enough to be used on other platforms with pwm. Signed-off-by:
Luotao Fu <l.fu@pengutronix.de> Signed-off-by:
-
Guennadi Liakhovetski authored
This patch allows drivers to override the default maximum brightness value of 255. We take care to preserve backwards-compatibility as much as possible, so that user-space ABI doesn't change for existing drivers. LED trigger code has also been updated to use the per-LED maximum. Signed-off-by:
Guennadi Liakhovetski <lg@denx.de> Signed-off-by:
-
Jens Axboe authored
By default, CFQ will anticipate more IO from a given io context if the previously completed IO was sync. This used to be fine, since the only sync IO was reads and O_DIRECT writes. But with more "normal" sync writes being used now, we don't want to anticipate for those. Add a bio/request flag that informs the IO scheduler that this is a sync request that we should not idle for. Introduce WRITE_ODIRECT specifically for O_DIRECT writes, and make sure that the other sync writes set this flag. Signed-off-by:
Jens Axboe <jens.axboe@oracle.com> Signed-off-by:
-
