- 07 Aug, 2009 6 commits
-
-
Sascha Hauer authored
Everyone should be free to include the files he actually needs. Signed-off-by:Sascha Hauer <s.hauer@pengutronix.de>
-
Sascha Hauer authored
Signed-off-by: -
Sascha Hauer authored
Signed-off-by: -
Sascha Hauer authored
Use the default value of 256 which is enough for all i.MX SoCs. Signed-off-by: -
Sascha Hauer authored
Signed-off-by: -
Sascha Hauer authored
Signed-off-by:
-
- 23 Jun, 2009 1 commit
-
-
Guennadi Liakhovetski authored
Add support for the MT9T031 CMOS camera sensor from Aptina to the PCM037 board. Also add two I2C iomux pin definitions, needed for pcm037. Also remove now unneeded #ifdef CONFIG_I2C_IMX. Signed-off-by:
Guennadi Liakhovetski <lg@denx.de> Signed-off-by:
-
- 11 Jun, 2009 1 commit
-
-
Fabian Godehardt authored
Using the iMX serial driver with an IrDA device needs extra peripheral settings and specific timing depending on the transmitter circuitry used. Signed-off-by:
Fabian Godehardt <fg@emlix.com> Signed-off-by:
Oskar Schirmer <os@emlix.com> Signed-off-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
- 04 Jun, 2009 1 commit
-
-
Daniel Schaeffer authored
Sascha Hauer wrote: > On Tue, Jun 02, 2009 at 04:18:42PM -0400, Daniel Schaeffer wrote: >> Add basic support for the Logic i.MX27LITE board. >> >> Signed-off-by: Daniel Schaeffer <daniel.schaeffer@timesys.com> > > Besides the comment made by Fabio this looks ok to me. > > Sascha > > Fixed issues pointed out by Fabio and Magnus, and rebased to mxc-master head. Signed-off-by:
Daniel Schaeffer <daniel.schaeffer@timesys.com> Signed-off-by:
-
- 03 Jun, 2009 1 commit
-
-
Fabio Estevam authored
Add basic support for MX35PDK board (www.freescale.com/imx35pdk). Signed-off-by:
Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by:
-
- 26 May, 2009 2 commits
-
-
Daniel Mack authored
Support code for lilly-1131 is implemented in a module/baseboard fashion. All code specific to peripherals found on the development board will go to this file. Signed-off-by:
Daniel Mack <daniel@caiaq.de> Signed-off-by:
-
Daniel Mack authored
This patch adds basic support for INCO startec's LILLY-1131 iMX31 based modules. The module needs a baseboard support to work which will be added in the next patch. Signed-off-by:
-
- 19 May, 2009 1 commit
-
-
Alberto Panizzo authored
Signed-off-by:
Alberto Panizzo <maramaopercheseimorto@gmail.com> Signed-off-by:
-
- 18 May, 2009 1 commit
-
-
Magnus Lilja authored
The i.MX31 PDK consists of several boards, one of them is a debug board containing a CPLD which controls some debug leds, switch buttons, an interrupt chip and an Ethernet controller. This patch adds support for detecting if the PDK board is present (during boot) and adds the interrupt chip to the kernel. Signed-off-by:
Magnus Lilja <lilja.magnus@gmail.com> Signed-off-by:
-
- 07 May, 2009 14 commits
-
-
Valentin Longchamp authored
Signed-off-by:
Valentin Longchamp <valentin.longchamp@epfl.ch> Acked-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by:
-
Valentin Longchamp authored
Since iomux code is not directly related to gpio on mx31, the calls to gpio_request are removed from iomux.c file. These calls have to be done in platform initialization files. The name of the singe pin call for iomux is also changed to mxc_iomux_alloc_pin. Signed-off-by:
-
Magnus Lilja authored
Several comments in board config files stated "mandatory for CONFIG_LL_DEBUG" but the correct name is CONFIG_DEBUG_LL. Signed-off-by:
-
Magnus Lilja authored
Signed-off-by:
-
Valentin Longchamp authored
As suggested by Sascha, I regroup them in a single patch so that the other patches become more orthogonal. changes since v1: changed I2C1 pin names Signed-off-by:
-
Fabio Estevam authored
This patch adds basic support to MX27PDK board http://www.freescale.com/imx27pdk ). Signed-off-by:
-
Ivo Clarysse authored
[PATCH v6] MXC: mx21ads base support Base machine support for the Freescale i.MX21ADS (M9328MX21ADSE) Application Development System. Signed-off-by:
Ivo Clarysse <ivo.clarysse@gmail.com> Signed-off-by:
-
Guennadi Liakhovetski authored
MXC GPIO controller does not support generation of interrupts on both edges. Emulate this mode in software by reconfiguring the irq trigger polarity on each interrupt. This follows an example of drivers/mfd/asic3.c. Signed-off-by:
-
Holger Schurig authored
Signed-off-by:
Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by:
-
Sascha Hauer authored
Currently we depend on hardcoded base addresses for the timer. This prevents us from compiling in more than one i.MX architecture at a time. This patch changes the base address to a runtime calculated one. Signed-off-by: -
Sascha Hauer authored
This allows us to have more mapping functions for more than one i.MX architecture in the kernel. As this is the earliest board specific hook we have, also use it to set the cpu type. Signed-off-by: -
Sascha Hauer authored
The PCM043 is a i.MX35 based board from Phytec also known as the phyCORE-i.MX35. Signed-off-by: -
Sascha Hauer authored
Signed-off-by: -
Sascha Hauer authored
This iomux is called iomux-v3 in the tree because it is the third known incarnation of MXC iomuxers. It is not only found on the MX35 but also on the MX51 and probably others. Signed-off-by:
-
- 05 May, 2009 1 commit
-
-
Uwe Kleine-König authored
Before this patch I got the following line in my dmesg: [ 0.000000] BUG: mapping for 0xd4000000 at 0xeb000000 overlaps vmalloc space VMALLOC_END is 0xf4000000 and there are the following other mappings defined for mx27ads: (0xa0500000,+0x00001000) maps to 0xffff0000 (0x10000000,+0x00100000) maps to 0xf4000000 (0x80000000,+0x00100000) maps to 0xf4100000 (0xd8000000,+0x00100000) maps to 0xf4200000 So map PBC to 0xf4300000. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
-
- 16 Apr, 2009 7 commits
-
-
Darius Augulis authored
Move ifdef under function brackets. This fixes compile crach when IRQ priorities are disabled. Signed-off-by:Darius Augulis <augulis.darius@gmail.com>
-
Paulius Zaleckas authored
Signed-off-by:Paulius Zaleckas <paulius.zaleckas@teltonika.lt> Cc: Sascha Hauer <s.hauer@pengutronix.de>
-
Valentin Longchamp authored
Signed-off-by: -
Valentin Longchamp authored
This also adds the pins used on mx31moboard for WP and CD Signed-off-by: -
Vladimir Barinov authored
Add I2C pin definitions for MX31 SoC Signed-off-by:Vladimir Barinov <vbarinov@embeddedalley.com>
-
Sascha Hauer authored
Signed-off-by: -
Holger Schurig authored
Set the correct clkdev-name for the i2c clock. It also get's rid of the ARCH_NR_GPIOS define on the rationale that isn't an ARCH-wide setting anyway. If a device has two pca953x devices, the reserved number will be wrong. Signed-off-by:
-
- 07 Apr, 2009 1 commit
-
-
Darius Augulis authored
Implementation of I2C Adapter/Algorithm Driver for I2C Bus integrated in Freescale's i.MX/MXC processors. Signed-off-by:
Wolfram Sang <w.sang@pengutronix.de> Signed-off-by:
Ben Dooks <ben-linux@fluff.org>
-
- 06 Apr, 2009 1 commit
-
-
Paulius Zaleckas authored
Add support for CMOS Sensor Interface on i.MX1 and i.MXL SoCs. create mode 100644 arch/arm/mach-mx1/ksym_mx1.c create mode 100644 arch/arm/mach-mx1/mx1_camera_fiq.S create mode 100644 arch/arm/plat-mxc/include/mach/mx1_camera.h create mode 100644 drivers/media/video/mx1_camera.c Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
- 30 Mar, 2009 1 commit
-
-
Guennadi Liakhovetski authored
Tested with 8 bit Bayer and 8 bit monochrome video. create mode 100644 arch/arm/plat-mxc/include/mach/mx3_camera.h create mode 100644 drivers/media/video/mx3_camera.c Signed-off-by:
-
- 27 Mar, 2009 1 commit
-
-
Ilya Yanok authored
This patch adds arch_reset() function for all mxc platforms. It also removes (unsused) arch/arm/mach-mx2/system.c file. This patch has been tested on i.MX1/27/31/35 Signed-off-by:
Ilya Yanok <yanok@emcraft.com> Signed-off-by:
-
