- 19 Jul, 2011 7 commits
-
-
Rafał Miłecki authored
Old masks were causing ugly, delayed lock ups. Signed-off-by:
Rafał Miłecki <zajec5@gmail.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Rafał Miłecki authored
Signed-off-by:
-
Rafał Miłecki authored
Signed-off-by:
-
Rafał Miłecki authored
Following operation was incorrectly translated: radio_read(0x0011) -> 0xffff radio_write(0x0011) <- 0xfff7 Signed-off-by:
-
Rafał Miłecki authored
Signed-off-by:
-
Rafał Miłecki authored
Also change the default channel to 11. This is the first channel closed driver switches to. Signed-off-by:
-
Rafał Miłecki authored
BCMA_IOCTL is register in agent (AKA wrapper) core, we need to use special R/W ops for it. Signed-off-by:
-
- 18 Jul, 2011 10 commits
-
-
Rajkumar Manoharan authored
drivers/net/wireless/ath/ath9k/hif_usb.c +135 hif_usb_mgmt_cb(6) warn: variable dereferenced before check 'cmd' drivers/net/wireless/ath/ath9k/btcoex.c +77 ath9k_hw_init_btcoex_hw(38) error: buffer overflow 'ah->hw_gen_timers.gen_timer_index' 32 <= 2009813776 Signed-off-by:
Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by:
-
Rajkumar Manoharan authored
drivers/net/wireless/ath/ath9k/init.c:199:21: warning: context imbalance in 'ath9k_reg_rmw' - different lock contexts for basic block drivers/net/wireless/ath/ath9k/xmit.c:1175:31: warning: context imbalance in 'ath_drain_txq_list' - unexpected unlock drivers/net/wireless/ath/ath9k/xmit.c:2047:23: warning: context imbalance in 'ath_tx_process_buffer' - unexpected unlock drivers/net/wireless/ath/ath9k/ar9003_eeprom.c:3041:24: warning: cast to restricted __le32 Signed-off-by:
-
Rafał Miłecki authored
We use all that functions by pointers only. This forces compiler to create additional duplicated functions that are not inline. Noticed by Michael in similar bcma code. Signed-off-by:
-
Christian Lamparter authored
Harshal Chhaya discovered during network tests, that several of his clients dropped-off the network. The captured packets shows that the beacons sent by the AP are at a much lower power than the other data packets. The reason for this mishap: The driver never updated the beacon phy register, so all beacons were always sent at the lowest power. Reference: http://marc.info/?l=linux-wireless&m=131067225105801 Reported-by:
Harshal Chhaya <harshal@gmail.com> Signed-off-by:
Christian Lamparter <chunkeey@googlemail.com> Signed-off-by:
-
Christian Lamparter authored
Signed-off-by:
-
Christian Lamparter authored
* reserves feature bit for CCA counters * extends hardware register file definitions Signed-off-by:
-
Pavel Roskin authored
Signed-off-by:
Pavel Roskin <proski@gnu.org> Signed-off-by:
-
Pavel Roskin authored
Signed-off-by:
-
Pavel Roskin authored
Signed-off-by:
-
Pavel Roskin authored
Signed-off-by:
-
- 16 Jul, 2011 18 commits
-
-
Emmanuel Grumbach authored
tx start will start the tx queues: basically configure the SCD Remove the IWLAGN prefix to SCD defines on the way. Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
Wey-Yi Guy <wey-yi.guy@intel.com>
-
Emmanuel Grumbach authored
Since the ICT is transport related, move all its functions to the transport layer. Signed-off-by:
Wey-Yi Guy <wey-yi.w.guy@intel.com>
-
Emmanuel Grumbach authored
Since iwlagn_stop_device was the only caller to the rx_stop / tx_stop, these two don't need to be API any more. Signed-off-by:
-
Emmanuel Grumbach authored
There are still a few functions here and there that should be put in the transport layer. Mainly the functions that are related to the reclaim flow. Signed-off-by:
-
Emmanuel Grumbach authored
Also create a new file: iwl-trans-int-pcie.h which will include the non static functions that are shared among the current pcie transport layer. Signed-off-by:
-
Fry, Donald H authored
Not needed since the driver split. Signed-off-by:
Don Fry <donald.h.fry@intel.com> Signed-off-by:
-
Wey-Yi Guy authored
Define bitmap for calibration Signed-off-by: -
Hsu, Kenny authored
The driver should take the ownership of the uCode as default setting for later operations after interface up. Signed-off-by:
Kenny Hsu <kenny.hsu@intel.com> Signed-off-by:
-
Johannes Berg authored
The first assignment of TX_CMD_FLG_SEQ_CTL_MSK for ack-expected mgmt frames is overwritten later in the function, so it's useless. Also, probe response frames, BACK request and others there are mutually exclusive so can be moved into an else branch. Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Emmanuel Grumbach authored
Those comments were missed in a previous commit. Signed-off-by:
-
Wey-Yi Guy authored
Modify the comments for iwl_cfg, no functional changes Signed-off-by: -
Wey-Yi Guy authored
Another clean up work after driver split Signed-off-by: -
Wey-Yi Guy authored
After driver split, no need to make the code so complex Signed-off-by: -
Wey-Yi Guy authored
Most of the functions in iwl-agn-hcmd are move to other files, no point to keep the file anymore. Signed-off-by: -
Emmanuel Grumbach authored
The upper layer receives a pointer to an iwl_rx_mem_buffer. I would prefer the upper layer to receive a pointer to an iwl_rx_packet, but this is impossible since the Rx path needs to add the address of the page to the skb. I may find a solution later. All the pre_rx_handler and notification code has been moved to the upper layer. Signed-off-by:
-
Emmanuel Grumbach authored
Since all the irq / tasklet is now handled in the transport layer, it should give an API to ensure that all the irq / tasklet have finished running. This will allow the upper layer to release all its resources. Signed-off-by:
-
Emmanuel Grumbach authored
PCIe doesn't provide any ISR registration API, whereas other buses do. Hence, we need to move the tasklet and irq to the transport layer to allow this flexibility. Signed-off-by:
-
Emmanuel Grumbach authored
Split the Tx datapath in two parts: * the first deals with the Tx cmd composition * the second attaches the skb + Tx cmd to the queues Signed-off-by:
-
- 15 Jul, 2011 4 commits
-
-
Pavel Roskin authored
Signed-off-by:
-
Felix Fietkau authored
For unicast the hardware sometimes reports MIC errors even though the frame that it received actually contains a valid MIC - on some chips this can happen frequently enough to trigger TKIP countermeasures. Fix this issue by not reporting MIC errors for unicast frames with a valid key, letting mac80211 validate the MIC instead. Additionally, strip the MIC for all frames that the hardware considers valid to avoid wasting CPU cycles re-validating it. Signed-off-by:
Felix Fietkau <nbd@openwrt.org> Signed-off-by:
-
Pavel Roskin authored
Eliminate spaces before tabs. Eliminate typedefs. Add spaces around operators. Signed-off-by:
-
Yogesh Ashok Powar authored
Following oops was seen on SMP machine >BUG: unable to handle kernel NULL pointer dereference at 00000012 >IP: [<f8c56691>] mwl8k_tx+0x20e/0x561 [mwl8k] >*pde = 00000000 >Oops: 0000 [#1] SMP >Modules linked in: mwl8k mac80211 cfg80211 [last unloaded: cfg80211] As ieee80211_tx_info->control.sta may be NULL during ->tx call, avoiding sta dereference in such scenario with the following patch. Signed-off-by:
Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by:
-
- 13 Jul, 2011 1 commit
-
-
Yogesh Ashok Powar authored
Currently, setting only legacy bitrates on 2.4GHz band are supported. Mode 802.11b/g/bg is enabled based on bitrates selection. If only CCK bitrates selected then 802.11b mode is enabled. If only OFDM bitrates are selected then 802.11g mode is enabled. For both: CCK and OFDM rates 802.11bg mixed mode is enabled. Signed-off-by:
Bing Zhao <bzhao@marvell.com> Signed-off-by:
-
