Commit fa9bfd61 authored by Felix Fietkau's avatar Felix Fietkau Committed by John W. Linville
Browse files

ath5k: add a new bus op for reading the mac address



On AHB, the calibration data usually does not contain a valid MAC address,
the correct MAC address is stored in the board config.
Signed-off-by: default avatarFelix Fietkau <nbd@openwrt.org>
Tested-by: default avatarSedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent 0cb9e06b
......@@ -18,6 +18,7 @@
#include <linux/nl80211.h>
#include <linux/platform_device.h>
#include <linux/etherdevice.h>
#include <ar231x_platform.h>
#include "ath5k.h"
#include "debug.h"
......@@ -62,10 +63,27 @@ int ath5k_hw_read_srev(struct ath5k_hw *ah)
return 0;
}
static int ath5k_ahb_eeprom_read_mac(struct ath5k_hw *ah, u8 *mac)
{
struct ath5k_softc *sc = ah->ah_sc;
struct platform_device *pdev = to_platform_device(sc->dev);
struct ar231x_board_config *bcfg = pdev->dev.platform_data;
u8 *cfg_mac;
if (to_platform_device(sc->dev)->id == 0)
cfg_mac = bcfg->config->wlan0_mac;
else
cfg_mac = bcfg->config->wlan1_mac;
memcpy(mac, cfg_mac, ETH_ALEN);
return 0;
}
static const struct ath_bus_ops ath_ahb_bus_ops = {
.ath_bus_type = ATH_AHB,
.read_cachesize = ath5k_ahb_read_cachesize,
.eeprom_read = ath5k_ahb_eeprom_read,
.eeprom_read_mac = ath5k_ahb_eeprom_read_mac,
};
/*Initialization*/
......
......@@ -1159,6 +1159,7 @@ struct ath_bus_ops {
enum ath_bus_type ath_bus_type;
void (*read_cachesize)(struct ath_common *common, int *csz);
bool (*eeprom_read)(struct ath_common *common, u32 off, u16 *data);
int (*eeprom_read_mac)(struct ath5k_hw *ah, u8 *mac);
};
/*
......@@ -1244,7 +1245,6 @@ int ath5k_hw_dma_stop(struct ath5k_hw *ah);
/* EEPROM access functions */
int ath5k_eeprom_init(struct ath5k_hw *ah);
void ath5k_eeprom_detach(struct ath5k_hw *ah);
int ath5k_eeprom_read_mac(struct ath5k_hw *ah, u8 *mac);
/* Protocol Control Unit Functions */
......
......@@ -2880,7 +2880,7 @@ ath5k_init(struct ieee80211_hw *hw)
INIT_WORK(&sc->reset_work, ath5k_reset_work);
INIT_DELAYED_WORK(&sc->tx_complete_work, ath5k_tx_complete_poll_work);
ret = ath5k_eeprom_read_mac(ah, mac);
ret = ath5k_hw_common(ah)->bus_ops->eeprom_read_mac(ah, mac);
if (ret) {
ATH5K_ERR(sc, "unable to read address from EEPROM\n");
goto err_queues;
......
......@@ -1732,35 +1732,6 @@ ath5k_eeprom_read_spur_chans(struct ath5k_hw *ah)
return ret;
}
/*
* Read the MAC address from eeprom
*/
int ath5k_eeprom_read_mac(struct ath5k_hw *ah, u8 *mac)
{
u8 mac_d[ETH_ALEN] = {};
u32 total, offset;
u16 data;
int octet;
AR5K_EEPROM_READ(0x20, data);
for (offset = 0x1f, octet = 0, total = 0; offset >= 0x1d; offset--) {
AR5K_EEPROM_READ(offset, data);
total += data;
mac_d[octet + 1] = data & 0xff;
mac_d[octet] = data >> 8;
octet += 2;
}
if (!total || total == 3 * 0xffff)
return -EINVAL;
memcpy(mac, mac_d, ETH_ALEN);
return 0;
}
/***********************\
* Init/Detach functions *
......
......@@ -17,6 +17,7 @@
#include <linux/nl80211.h>
#include <linux/pci.h>
#include <linux/pci-aspm.h>
#include <linux/etherdevice.h>
#include "../ath.h"
#include "ath5k.h"
#include "debug.h"
......@@ -108,11 +109,42 @@ int ath5k_hw_read_srev(struct ath5k_hw *ah)
return 0;
}
/*
* Read the MAC address from eeprom or platform_data
*/
static int ath5k_pci_eeprom_read_mac(struct ath5k_hw *ah, u8 *mac)
{
u8 mac_d[ETH_ALEN] = {};
u32 total, offset;
u16 data;
int octet;
AR5K_EEPROM_READ(0x20, data);
for (offset = 0x1f, octet = 0, total = 0; offset >= 0x1d; offset--) {
AR5K_EEPROM_READ(offset, data);
total += data;
mac_d[octet + 1] = data & 0xff;
mac_d[octet] = data >> 8;
octet += 2;
}
if (!total || total == 3 * 0xffff)
return -EINVAL;
memcpy(mac, mac_d, ETH_ALEN);
return 0;
}
/* Common ath_bus_opts structure */
static const struct ath_bus_ops ath_pci_bus_ops = {
.ath_bus_type = ATH_PCI,
.read_cachesize = ath5k_pci_read_cachesize,
.eeprom_read = ath5k_pci_eeprom_read,
.eeprom_read_mac = ath5k_pci_eeprom_read_mac,
};
/********************\
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment