Commit f8bacc21 authored by Johannes Berg's avatar Johannes Berg

cfg80211: clean up mesh plink station change API

Make the ability to leave the plink_state unchanged not use a
magic -1 variable that isn't in the enum, but an explicit change
flag; reject invalid plink states or actions and move the needed
constants for plink actions to the right header file. Also
reject plink_state changes for non-mesh interfaces.
Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
parent c0f3a317
......@@ -610,23 +610,11 @@ struct cfg80211_ap_settings {
bool radar_required;
};
/**
* enum plink_action - actions to perform in mesh peers
*
* @PLINK_ACTION_INVALID: action 0 is reserved
* @PLINK_ACTION_OPEN: start mesh peer link establishment
* @PLINK_ACTION_BLOCK: block traffic from this mesh peer
*/
enum plink_actions {
PLINK_ACTION_INVALID,
PLINK_ACTION_OPEN,
PLINK_ACTION_BLOCK,
};
/**
* enum station_parameters_apply_mask - station parameter values to apply
* @STATION_PARAM_APPLY_UAPSD: apply new uAPSD parameters (uapsd_queues, max_sp)
* @STATION_PARAM_APPLY_CAPABILITY: apply new capability
* @STATION_PARAM_APPLY_PLINK_STATE: apply new plink state
*
* Not all station parameters have in-band "no change" signalling,
* for those that don't these flags will are used.
......@@ -634,6 +622,7 @@ enum plink_actions {
enum station_parameters_apply_mask {
STATION_PARAM_APPLY_UAPSD = BIT(0),
STATION_PARAM_APPLY_CAPABILITY = BIT(1),
STATION_PARAM_APPLY_PLINK_STATE = BIT(2),
};
/**
......
......@@ -884,7 +884,8 @@ enum nl80211_commands {
* consisting of a nested array.
*
* @NL80211_ATTR_MESH_ID: mesh id (1-32 bytes).
* @NL80211_ATTR_STA_PLINK_ACTION: action to perform on the mesh peer link.
* @NL80211_ATTR_STA_PLINK_ACTION: action to perform on the mesh peer link
* (see &enum nl80211_plink_action).
* @NL80211_ATTR_MPATH_NEXT_HOP: MAC address of the next hop for a mesh path.
* @NL80211_ATTR_MPATH_INFO: information about a mesh_path, part of mesh path
* info given for %NL80211_CMD_GET_MPATH, nested attribute described at
......@@ -3307,6 +3308,23 @@ enum nl80211_plink_state {
MAX_NL80211_PLINK_STATES = NUM_NL80211_PLINK_STATES - 1
};
/**
* enum nl80211_plink_action - actions to perform in mesh peers
*
* @NL80211_PLINK_ACTION_NO_ACTION: perform no action
* @NL80211_PLINK_ACTION_OPEN: start mesh peer link establishment
* @NL80211_PLINK_ACTION_BLOCK: block traffic from this mesh peer
* @NUM_NL80211_PLINK_ACTIONS: number of possible actions
*/
enum plink_actions {
NL80211_PLINK_ACTION_NO_ACTION,
NL80211_PLINK_ACTION_OPEN,
NL80211_PLINK_ACTION_BLOCK,
NUM_NL80211_PLINK_ACTIONS,
};
#define NL80211_KCK_LEN 16
#define NL80211_KEK_LEN 16
#define NL80211_REPLAY_CTR_LEN 8
......
......@@ -1261,7 +1261,9 @@ static int sta_apply_parameters(struct ieee80211_local *local,
if (ieee80211_vif_is_mesh(&sdata->vif)) {
#ifdef CONFIG_MAC80211_MESH
u32 changed = 0;
if (sdata->u.mesh.security & IEEE80211_MESH_SEC_SECURED) {
if (sdata->u.mesh.security & IEEE80211_MESH_SEC_SECURED &&
(params->sta_modify_mask &
STATION_PARAM_APPLY_PLINK_STATE)) {
switch (params->plink_state) {
case NL80211_PLINK_ESTAB:
if (sta->plink_state != NL80211_PLINK_ESTAB)
......@@ -1292,12 +1294,18 @@ static int sta_apply_parameters(struct ieee80211_local *local,
/* nothing */
break;
}
} else if (params->sta_modify_mask &
STATION_PARAM_APPLY_PLINK_STATE) {
return -EINVAL;
} else {
switch (params->plink_action) {
case PLINK_ACTION_OPEN:
case NL80211_PLINK_ACTION_NO_ACTION:
/* nothing */
break;
case NL80211_PLINK_ACTION_OPEN:
changed |= mesh_plink_open(sta);
break;
case PLINK_ACTION_BLOCK:
case NL80211_PLINK_ACTION_BLOCK:
changed |= mesh_plink_block(sta);
break;
}
......
......@@ -3412,7 +3412,6 @@ static int nl80211_set_station(struct sk_buff *skb, struct genl_info *info)
memset(&params, 0, sizeof(params));
params.listen_interval = -1;
params.plink_state = -1;
if (info->attrs[NL80211_ATTR_STA_AID])
return -EINVAL;
......@@ -3451,13 +3450,20 @@ static int nl80211_set_station(struct sk_buff *skb, struct genl_info *info)
if (parse_station_flags(info, dev->ieee80211_ptr->iftype, &params))
return -EINVAL;
if (info->attrs[NL80211_ATTR_STA_PLINK_ACTION])
if (info->attrs[NL80211_ATTR_STA_PLINK_ACTION]) {
params.plink_action =
nla_get_u8(info->attrs[NL80211_ATTR_STA_PLINK_ACTION]);
nla_get_u8(info->attrs[NL80211_ATTR_STA_PLINK_ACTION]);
if (params.plink_action >= NUM_NL80211_PLINK_ACTIONS)
return -EINVAL;
}
if (info->attrs[NL80211_ATTR_STA_PLINK_STATE])
if (info->attrs[NL80211_ATTR_STA_PLINK_STATE]) {
params.plink_state =
nla_get_u8(info->attrs[NL80211_ATTR_STA_PLINK_STATE]);
nla_get_u8(info->attrs[NL80211_ATTR_STA_PLINK_STATE]);
if (params.plink_state >= NUM_NL80211_PLINK_STATES)
return -EINVAL;
params.sta_modify_mask |= STATION_PARAM_APPLY_PLINK_STATE;
}
if (info->attrs[NL80211_ATTR_LOCAL_MESH_POWER_MODE]) {
enum nl80211_mesh_power_mode pm = nla_get_u32(
......@@ -3479,6 +3485,8 @@ static int nl80211_set_station(struct sk_buff *skb, struct genl_info *info)
return -EINVAL;
if (params.local_pm)
return -EINVAL;
if (params.sta_modify_mask & STATION_PARAM_APPLY_PLINK_STATE)
return -EINVAL;
/* TDLS can't be set, ... */
if (params.sta_flags_set & BIT(NL80211_STA_FLAG_TDLS_PEER))
......@@ -3542,6 +3550,8 @@ static int nl80211_set_station(struct sk_buff *skb, struct genl_info *info)
return -EINVAL;
if (params.local_pm)
return -EINVAL;
if (params.sta_modify_mask & STATION_PARAM_APPLY_PLINK_STATE)
return -EINVAL;
/* reject any changes other than AUTHORIZED or WME (for TDLS) */
if (params.sta_flags_mask & ~(BIT(NL80211_STA_FLAG_AUTHORIZED) |
BIT(NL80211_STA_FLAG_WME)))
......@@ -3553,6 +3563,8 @@ static int nl80211_set_station(struct sk_buff *skb, struct genl_info *info)
return -EINVAL;
if (params.local_pm)
return -EINVAL;
if (params.sta_modify_mask & STATION_PARAM_APPLY_PLINK_STATE)
return -EINVAL;
if (info->attrs[NL80211_ATTR_HT_CAPABILITY] ||
info->attrs[NL80211_ATTR_VHT_CAPABILITY])
return -EINVAL;
......@@ -3652,9 +3664,12 @@ static int nl80211_new_station(struct sk_buff *skb, struct genl_info *info)
params.vht_capa =
nla_data(info->attrs[NL80211_ATTR_VHT_CAPABILITY]);
if (info->attrs[NL80211_ATTR_STA_PLINK_ACTION])
if (info->attrs[NL80211_ATTR_STA_PLINK_ACTION]) {
params.plink_action =
nla_get_u8(info->attrs[NL80211_ATTR_STA_PLINK_ACTION]);
nla_get_u8(info->attrs[NL80211_ATTR_STA_PLINK_ACTION]);
if (params.plink_action >= NUM_NL80211_PLINK_ACTIONS)
return -EINVAL;
}
if (!rdev->ops->add_station)
return -EOPNOTSUPP;
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment