diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index 591e94448e636edebab3791bdd69363b54a13895..2a4d77946c7dc075df1a6678a54204ea8e618502 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -483,3 +483,10 @@ Why: With the recent innovations in CPU hardware acceleration technologies
Who: Alok N Kataria <akataria@vmware.com>
----------------------------
+
+What: adt7473 hardware monitoring driver
+When: February 2010
+Why: Obsoleted by the adt7475 driver.
+Who: Jean Delvare <khali@linux-fr.org>
+
+---------------------------
diff --git a/Documentation/hwmon/adt7473 b/Documentation/hwmon/adt7473
index 1cbf671822e23d063c648984c145149792978c62..446612bd1fb983510dc67f2bbef51d2ee775b31d 100644
--- a/Documentation/hwmon/adt7473
+++ b/Documentation/hwmon/adt7473
@@ -9,6 +9,8 @@ Supported chips:
Author: Darrick J. Wong
+This driver is depreacted, please use the adt7475 driver instead.
+
Description
-----------
diff --git a/Documentation/hwmon/adt7475 b/Documentation/hwmon/adt7475
index a2b1abec850e7af2c2a524cd99b4c1ca83f96e9d..0502f2b464e1c09ec15a2cb4b9c9b3587419bb76 100644
--- a/Documentation/hwmon/adt7475
+++ b/Documentation/hwmon/adt7475
@@ -1,87 +1,117 @@
-This describes the interface for the ADT7475 driver:
-
-(there are 4 fans, numbered fan1 to fan4):
-
-fanX_input Read the current speed of the fan (in RPMs)
-fanX_min Read/write the minimum speed of the fan. Dropping
- below this sets an alarm.
-
-(there are three PWMs, numbered pwm1 to pwm3):
-
-pwmX Read/write the current duty cycle of the PWM. Writes
- only have effect when auto mode is turned off (see
- below). Range is 0 - 255.
-
-pwmX_enable Fan speed control method:
-
- 0 - No control (fan at full speed)
- 1 - Manual fan speed control (using pwm[1-*])
- 2 - Automatic fan speed control
-
-pwmX_auto_channels_temp Select which channels affect this PWM
-
- 1 - TEMP1 controls PWM
- 2 - TEMP2 controls PWM
- 4 - TEMP3 controls PWM
- 6 - TEMP2 and TEMP3 control PWM
- 7 - All three inputs control PWM
-
-pwmX_freq Read/write the PWM frequency in Hz. The number
- should be one of the following:
-
- 11 Hz
- 14 Hz
- 22 Hz
- 29 Hz
- 35 Hz
- 44 Hz
- 58 Hz
- 88 Hz
-
-pwmX_auto_point1_pwm Read/write the minimum PWM duty cycle in automatic mode
-
-pwmX_auto_point2_pwm Read/write the maximum PWM duty cycle in automatic mode
-
-(there are three temperature settings numbered temp1 to temp3):
-
-tempX_input Read the current temperature. The value is in milli
- degrees of Celsius.
-
-tempX_max Read/write the upper temperature limit - exceeding this
- will cause an alarm.
-
-tempX_min Read/write the lower temperature limit - exceeding this
- will cause an alarm.
-
-tempX_offset Read/write the temperature adjustment offset
-
-tempX_crit Read/write the THERM limit for remote1.
-
-tempX_crit_hyst Set the temperature value below crit where the
- fans will stay on - this helps drive the temperature
- low enough so it doesn't stay near the edge and
- cause THERM to keep tripping.
-
-tempX_auto_point1_temp Read/write the minimum temperature where the fans will
- turn on in automatic mode.
-
-tempX_auto_point2_temp Read/write the maximum temperature over which the fans
- will run in automatic mode. tempX_auto_point1_temp
- and tempX_auto_point2_temp together define the
- range of automatic control.
-
-tempX_alarm Read a 1 if the max/min alarm is set
-tempX_fault Read a 1 if either temp1 or temp3 diode has a fault
-
-(There are two voltage settings, in1 and in2):
-
-inX_input Read the current voltage on VCC. Value is in
- millivolts.
-
-inX_min read/write the minimum voltage limit.
- Dropping below this causes an alarm.
-
-inX_max read/write the maximum voltage limit.
- Exceeding this causes an alarm.
-
-inX_alarm Read a 1 if the max/min alarm is set.
+Kernel driver adt7475
+=====================
+
+Supported chips:
+ * Analog Devices ADT7473
+ Prefix: 'adt7473'
+ Addresses scanned: I2C 0x2C, 0x2D, 0x2E
+ Datasheet: Publicly available at the On Semiconductors website
+ * Analog Devices ADT7475
+ Prefix: 'adt7475'
+ Addresses scanned: I2C 0x2E
+ Datasheet: Publicly available at the On Semiconductors website
+ * Analog Devices ADT7476
+ Prefix: 'adt7476'
+ Addresses scanned: I2C 0x2C, 0x2D, 0x2E
+ Datasheet: Publicly available at the On Semiconductors website
+ * Analog Devices ADT7490
+ Prefix: 'adt7490'
+ Addresses scanned: I2C 0x2C, 0x2D, 0x2E
+ Datasheet: Publicly available at the On Semiconductors website
+
+Authors:
+ Jordan Crouse
+ Hans de Goede
+ Darrick J. Wong (documentation)
+ Jean Delvare
+
+
+Description
+-----------
+
+This driver implements support for the Analog Devices ADT7473, ADT7475,
+ADT7476 and ADT7490 chip family. The ADT7473 and ADT7475 differ only in
+minor details. The ADT7476 has additional features, including extra voltage
+measurement inputs and VID support. The ADT7490 also has additional
+features, including extra voltage measurement inputs and PECI support. All
+the supported chips will be collectively designed by the name "ADT747x" in
+the rest of this document.
+
+The ADT747x uses the 2-wire interface compatible with the SMBus 2.0
+specification. Using an analog to digital converter it measures three (3)
+temperatures and two (2) or more voltages. It has four (4) 16-bit counters
+for measuring fan speed. There are three (3) PWM outputs that can be used
+to control fan speed.
+
+A sophisticated control system for the PWM outputs is designed into the
+ADT747x that allows fan speed to be adjusted automatically based on any of the
+three temperature sensors. Each PWM output is individually adjustable and
+programmable. Once configured, the ADT747x will adjust the PWM outputs in
+response to the measured temperatures without further host intervention.
+This feature can also be disabled for manual control of the PWM's.
+
+Each of the measured inputs (voltage, temperature, fan speed) has
+corresponding high/low limit values. The ADT747x will signal an ALARM if
+any measured value exceeds either limit.
+
+The ADT747x samples all inputs continuously. The driver will not read
+the registers more often than once every other second. Further,
+configuration data is only read once per minute.
+
+Chip Differences Summary
+------------------------
+
+ADT7473:
+ * 2 voltage inputs
+ * system acoustics optimizations (not implemented)
+
+ADT7475:
+ * 2 voltage inputs
+
+ADT7476:
+ * 5 voltage inputs
+ * VID support
+
+ADT7490:
+ * 6 voltage inputs
+ * 1 Imon input (not implemented)
+ * PECI support (not implemented)
+ * 2 GPIO pins (not implemented)
+ * system acoustics optimizations (not implemented)
+
+Special Features
+----------------
+
+The ADT747x has a 10-bit ADC and can therefore measure temperatures
+with a resolution of 0.25 degree Celsius. Temperature readings can be
+configured either for two's complement format or "Offset 64" format,
+wherein 64 is subtracted from the raw value to get the temperature value.
+
+The datasheet is very detailed and describes a procedure for determining
+an optimal configuration for the automatic PWM control.
+
+Fan Speed Control
+-----------------
+
+The driver exposes two trip points per PWM channel.
+
+point1: Set the PWM speed at the lower temperature bound
+point2: Set the PWM speed at the higher temperature bound
+
+The ADT747x will scale the PWM linearly between the lower and higher PWM
+speed when the temperature is between the two temperature boundaries.
+Temperature boundaries are associated to temperature channels rather than
+PWM outputs, and a given PWM output can be controlled by several temperature
+channels. As a result, the ADT747x may compute more than one PWM value
+for a channel at a given time, in which case the maximum value (fastest
+fan speed) is applied. PWM values range from 0 (off) to 255 (full speed).
+
+Fan speed may be set to maximum when the temperature sensor associated with
+the PWM control exceeds temp#_max.
+
+Notes
+-----
+
+The nVidia binary driver presents an ADT7473 chip via an on-card i2c bus.
+Unfortunately, they fail to set the i2c adapter class, so this driver may
+fail to find the chip until the nvidia driver is patched.
diff --git a/Documentation/hwmon/f71882fg b/Documentation/hwmon/f71882fg
index bee4c30bc1e2a82caa2421c9504e031ff1658c73..a7952c2bd959338d4358a8fbdb51ee80c62fa61d 100644
--- a/Documentation/hwmon/f71882fg
+++ b/Documentation/hwmon/f71882fg
@@ -14,6 +14,10 @@ Supported chips:
Prefix: 'f71882fg'
Addresses scanned: none, address read from Super I/O config space
Datasheet: Available from the Fintek website
+ * Fintek F71889FG
+ Prefix: 'f71889fg'
+ Addresses scanned: none, address read from Super I/O config space
+ Datasheet: Should become available on the Fintek website soon
* Fintek F8000
Prefix: 'f8000'
Addresses scanned: none, address read from Super I/O config space
@@ -51,6 +55,12 @@ supported. The right one to use depends on external circuitry on the
motherboard, so the driver assumes that the BIOS set the method
properly.
+Note that the lowest numbered temperature zone trip point corresponds to
+to the border between the highest and one but highest temperature zones, and
+vica versa. So the temperature zone trip points 1-4 (or 1-2) go from high temp
+to low temp! This is how things are implemented in the IC, and the driver
+mimicks this.
+
There are 2 modes to specify the speed of the fan, PWM duty cycle (or DC
voltage) mode, where 0-100% duty cycle (0-100% of 12V) is specified. And RPM
mode where the actual RPM of the fan (as measured) is controlled and the speed
diff --git a/Documentation/hwmon/it87 b/Documentation/hwmon/it87
index 659315d98e00834bf8fb177311f0ebe041dd2b27..f9ba96c0ac4acf19573ca552703bd7014b350488 100644
--- a/Documentation/hwmon/it87
+++ b/Documentation/hwmon/it87
@@ -86,7 +86,6 @@ The IT8712F and IT8716F additionally feature VID inputs, used to report
the Vcore voltage of the processor. The early IT8712F have 5 VID pins,
the IT8716F and late IT8712F have 6. They are shared with other functions
though, so the functionality may not be available on a given system.
-The driver dumbly assume it is there.
The IT8718F and IT8720F also features VID inputs (up to 8 pins) but the value
is stored in the Super-I/O configuration space. Due to technical limitations,
diff --git a/Documentation/hwmon/mc13783-adc b/Documentation/hwmon/mc13783-adc
new file mode 100644
index 0000000000000000000000000000000000000000..044531a864054ad7434406cac0426e2d5d4044e2
--- /dev/null
+++ b/Documentation/hwmon/mc13783-adc
@@ -0,0 +1,50 @@
+Kernel driver mc13783-adc
+=========================
+
+Supported chips:
+ * Freescale Atlas MC13783
+ Prefix: 'mc13783_adc'
+ Datasheet: http://www.freescale.com/files/rf_if/doc/data_sheet/MC13783.pdf?fsrch=1
+
+Authors:
+ Sascha Hauer <s.hauer@pengutronix.de>
+ Luotao Fu <l.fu@pengutronix.de>
+
+Description
+-----------
+
+The Freescale MC13783 is a Power Management and Audio Circuit. Among
+other things it contains a 10-bit A/D converter. The converter has 16
+channels which can be used in different modes.
+The A/D converter has a resolution of 2.25mV. Channels 0-4 have
+a dedicated meaning with chip internal scaling applied. Channels 5-7
+can be used as general purpose inputs or alternatively in a dedicated
+mode. Channels 12-15 are occupied by the touchscreen if it's active.
+
+Currently the driver only supports channels 2 and 5-15 with no alternative
+modes for channels 5-7.
+
+See this table for the meaning of the different channels and their chip
+internal scaling:
+
+Channel Signal Input Range Scaling
+-------------------------------------------------------------------------------
+0 Battery Voltage (BATT) 2.50 - 4.65V -2.40V
+1 Battery Current (BATT - BATTISNS) -50 - 50 mV x20
+2 Application Supply (BP) 2.50 - 4.65V -2.40V
+3 Charger Voltage (CHRGRAW) 0 - 10V / /5
+ 0 - 20V /10
+4 Charger Current (CHRGISNSP-CHRGISNSN) -0.25V - 0.25V x4
+5 General Purpose ADIN5 / Battery Pack Thermistor 0 - 2.30V No
+6 General Purpose ADIN6 / Backup Voltage (LICELL) 0 - 2.30V / No /
+ 1.50 - 3.50V -1.20V
+7 General Purpose ADIN7 / UID / Die Temperature 0 - 2.30V / No /
+ 0 - 2.55V / x0.9 / No
+8 General Purpose ADIN8 0 - 2.30V No
+9 General Purpose ADIN9 0 - 2.30V No
+10 General Purpose ADIN10 0 - 2.30V No
+11 General Purpose ADIN11 0 - 2.30V No
+12 General Purpose TSX1 / Touchscreen X-plate 1 0 - 2.30V No
+13 General Purpose TSX2 / Touchscreen X-plate 2 0 - 2.30V No
+14 General Purpose TSY1 / Touchscreen Y-plate 1 0 - 2.30V No
+15 General Purpose TSY2 / Touchscreen Y-plate 2 0 - 2.30V No
diff --git a/Documentation/hwmon/sysfs-interface b/Documentation/hwmon/sysfs-interface
index 82def883361b1a1d30ca2e5af6f1e0a5b56c9b27..3de6b0bcb1474ecda75e9aa4ff275d3b3af67a6f 100644
--- a/Documentation/hwmon/sysfs-interface
+++ b/Documentation/hwmon/sysfs-interface
@@ -225,8 +225,6 @@ pwm[1-*]_auto_point[1-*]_temp_hyst
to PWM output channels.
RW
-OR
-
temp[1-*]_auto_point[1-*]_pwm
temp[1-*]_auto_point[1-*]_temp
temp[1-*]_auto_point[1-*]_temp_hyst
@@ -235,6 +233,15 @@ temp[1-*]_auto_point[1-*]_temp_hyst
to temperature channels.
RW
+There is a third case where trip points are associated to both PWM output
+channels and temperature channels: the PWM values are associated to PWM
+output channels while the temperature values are associated to temperature
+channels. In that case, the result is determined by the mapping between
+temperature inputs and PWM outputs. When several temperature inputs are
+mapped to a given PWM output, this leads to several candidate PWM values.
+The actual result is up to the chip, but in general the highest candidate
+value (fastest fan speed) wins.
+
****************
* Temperatures *
diff --git a/Documentation/hwmon/w83627hf b/Documentation/hwmon/w83627hf
index 6ee36dbafd64afaee72a4c308ad20c39bb5d5f15..44dd2bcc72bdd4d5fd8ab4efbf524f3b1e622706 100644
--- a/Documentation/hwmon/w83627hf
+++ b/Documentation/hwmon/w83627hf
@@ -32,8 +32,6 @@ Authors:
Module Parameters
-----------------
-* force_addr: int
- Initialize the ISA address of the sensors
* force_i2c: int
Initialize the I2C address of the sensors
* init: int
@@ -70,3 +68,30 @@ doesn't help, you may just ignore the bogus VID reading with no harm done.
For further information on this driver see the w83781d driver documentation.
[1] http://www.lm-sensors.org/browser/lm-sensors/trunk/doc/vid
+
+Forcing the address
+-------------------
+
+The driver used to have a module parameter named force_addr, which could
+be used to force the base I/O address of the hardware monitoring block.
+This was meant as a workaround for mainboards with a broken BIOS. This
+module parameter is gone for technical reasons. If you need this feature,
+you can obtain the same result by using the isaset tool (part of
+lm-sensors) before loading the driver:
+
+# Enter the Super I/O config space
+isaset -y -f 0x2e 0x87
+isaset -y -f 0x2e 0x87
+
+# Select the hwmon logical device
+isaset -y 0x2e 0x2f 0x07 0x0b
+
+# Set the base I/O address (to 0x290 in this example)
+isaset -y 0x2e 0x2f 0x60 0x02
+isaset -y 0x2e 0x2f 0x61 0x90
+
+# Exit the Super-I/O config space
+isaset -y -f 0x2e 0xaa
+
+The above sequence assumes a Super-I/O config space at 0x2e/0x2f, but
+0x4e/0x4f is also possible.
diff --git a/MAINTAINERS b/MAINTAINERS
index 107a5a5a0174d5209f92b05effaaadaba1c96bf4..746b706206da70d40f62a6998f387cdfdf182a2f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -327,6 +327,13 @@ M: Colin Leroy <colin@colino.net>
S: Maintained
F: drivers/macintosh/therm_adt746x.c
+ADT7475 HARDWARE MONITOR DRIVER
+M: Jean Delvare <khali@linux-fr.org>
+L: lm-sensors@lm-sensors.org
+S: Maintained
+F: Documentation/hwmon/adt7475
+F: drivers/hwmon/adt7475.c
+
ADVANSYS SCSI DRIVER
M: Matthew Wilcox <matthew@wil.cx>
L: linux-scsi@vger.kernel.org
@@ -2416,7 +2423,9 @@ HARDWARE MONITORING
L: lm-sensors@lm-sensors.org
W: http://www.lm-sensors.org/
S: Orphan
+F: Documentation/hwmon/
F: drivers/hwmon/
+F: include/linux/hwmon*.h
HARDWARE RANDOM NUMBER GENERATOR CORE
M: Matt Mackall <mpm@selenic.com>
@@ -3312,6 +3321,12 @@ S: Maintained
F: Documentation/hwmon/lis3lv02d
F: drivers/hwmon/lis3lv02d.*
+LM73 HARDWARE MONITOR DRIVER
+M: Guillaume Ligneul <guillaume.ligneul@gmail.com>
+L: lm-sensors@lm-sensors.org
+S: Maintained
+F: drivers/hwmon/lm73.c
+
LM83 HARDWARE MONITOR DRIVER
M: Jean Delvare <khali@linux-fr.org>
L: lm-sensors@lm-sensors.org
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 700e93adeb3308a37fbd1e35ae948d1391f980c8..9e640c62ebd9d267c1efcc2800ae07c36854caf8 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -191,21 +191,27 @@ config SENSORS_ADT7470
will be called adt7470.
config SENSORS_ADT7473
- tristate "Analog Devices ADT7473"
+ tristate "Analog Devices ADT7473 (DEPRECATED)"
depends on I2C && EXPERIMENTAL
+ select SENSORS_ADT7475
help
If you say yes here you get support for the Analog Devices
ADT7473 temperature monitoring chips.
+ This driver is deprecated, you should use the adt7475 driver
+ instead.
+
This driver can also be built as a module. If so, the module
will be called adt7473.
config SENSORS_ADT7475
- tristate "Analog Devices ADT7475"
+ tristate "Analog Devices ADT7473, ADT7475, ADT7476 and ADT7490"
depends on I2C && EXPERIMENTAL
+ select HWMON_VID
help
If you say yes here you get support for the Analog Devices
- ADT7475 hardware monitoring chips.
+ ADT7473, ADT7475, ADT7476 and ADT7490 hardware monitoring
+ chips.
This driver can also be build as a module. If so, the module
will be called adt7475.
@@ -305,12 +311,12 @@ config SENSORS_F71805F
will be called f71805f.
config SENSORS_F71882FG
- tristate "Fintek F71858FG, F71862FG, F71882FG and F8000"
+ tristate "Fintek F71858FG, F71862FG, F71882FG, F71889FG and F8000"
depends on EXPERIMENTAL
help
If you say yes here you get support for hardware monitoring
- features of the Fintek F71858FG, F71862FG/71863FG, F71882FG/F71883FG
- and F8000 Super-I/O chips.
+ features of the Fintek F71858FG, F71862FG/71863FG, F71882FG/F71883FG,
+ F71889FG and F8000 Super-I/O chips.
This driver can also be built as a module. If so, the module
will be called f71882fg.
@@ -442,6 +448,15 @@ config SENSORS_LM70
This driver can also be built as a module. If so, the module
will be called lm70.
+config SENSORS_LM73
+ tristate "National Semiconductor LM73"
+ depends on I2C
+ help
+ If you say yes here you get support for National Semiconductor LM73
+ sensor chips.
+ This driver can also be built as a module. If so, the module
+ will be called lm73.
+
config SENSORS_LM75
tristate "National Semiconductor LM75 and compatibles"
depends on I2C
@@ -841,7 +856,7 @@ config SENSORS_W83781D
config SENSORS_W83791D
tristate "Winbond W83791D"
- depends on I2C && EXPERIMENTAL
+ depends on I2C
select HWMON_VID
help
If you say yes here you get support for the Winbond W83791D chip.
@@ -1008,6 +1023,12 @@ config SENSORS_APPLESMC
Say Y here if you have an applicable laptop and want to experience
the awesome power of applesmc.
+config SENSORS_MC13783_ADC
+ tristate "Freescale MC13783 ADC"
+ depends on MFD_MC13783
+ help
+ Support for the A/D converter on MC13783 PMIC.
+
if ACPI
comment "ACPI drivers"
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 9f46cb019cc6d99e28dbec508c2d73a68a6eb384..33c2ee105284124ee1247823fc391c4611577771 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -57,6 +57,7 @@ obj-$(CONFIG_SENSORS_LIS3LV02D) += lis3lv02d.o hp_accel.o
obj-$(CONFIG_SENSORS_LIS3_SPI) += lis3lv02d.o lis3lv02d_spi.o
obj-$(CONFIG_SENSORS_LM63) += lm63.o
obj-$(CONFIG_SENSORS_LM70) += lm70.o
+obj-$(CONFIG_SENSORS_LM73) += lm73.o
obj-$(CONFIG_SENSORS_LM75) += lm75.o
obj-$(CONFIG_SENSORS_LM77) += lm77.o
obj-$(CONFIG_SENSORS_LM78) += lm78.o
@@ -73,6 +74,7 @@ obj-$(CONFIG_SENSORS_LTC4245) += ltc4245.o
obj-$(CONFIG_SENSORS_MAX1111) += max1111.o
obj-$(CONFIG_SENSORS_MAX1619) += max1619.o
obj-$(CONFIG_SENSORS_MAX6650) += max6650.o
+obj-$(CONFIG_SENSORS_MC13783_ADC)+= mc13783-adc.o
obj-$(CONFIG_SENSORS_PC87360) += pc87360.o
obj-$(CONFIG_SENSORS_PC87427) += pc87427.o
obj-$(CONFIG_SENSORS_PCF8591) += pcf8591.o
diff --git a/drivers/hwmon/adm1021.c b/drivers/hwmon/adm1021.c
index afc5943181251404ddd84893f04ef49b8aab3434..33acf29531afa30598e684ed82f2a56295d8a835 100644
--- a/drivers/hwmon/adm1021.c
+++ b/drivers/hwmon/adm1021.c
@@ -288,9 +288,8 @@ static int adm1021_detect(struct i2c_client *client, int kind,
struct i2c_board_info *info)
{
struct i2c_adapter *adapter = client->adapter;
- int i;
- const char *type_name = "";
- int conv_rate, status, config;
+ const char *type_name;
+ int conv_rate, status, config, man_id, dev_id;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
pr_debug("adm1021: detect failed, "
@@ -303,62 +302,37 @@ static int adm1021_detect(struct i2c_client *client, int kind,
ADM1021_REG_CONV_RATE_R);
config = i2c_smbus_read_byte_data(client, ADM1021_REG_CONFIG_R);
- /* Now, we do the remaining detection. */
- if (kind < 0) {
- if ((status & 0x03) != 0x00 || (config & 0x3F) != 0x00
- || (conv_rate & 0xF8) != 0x00) {
- pr_debug("adm1021: detect failed, "
- "chip not detected!\n");
- return -ENODEV;
- }
+ /* Check unused bits */
+ if ((status & 0x03) || (config & 0x3F) || (conv_rate & 0xF8)) {
+ pr_debug("adm1021: detect failed, chip not detected!\n");
+ return -ENODEV;
}
/* Determine the chip type. */
- if (kind <= 0) {
- i = i2c_smbus_read_byte_data(client, ADM1021_REG_MAN_ID);
- if (i == 0x41)
- if ((i2c_smbus_read_byte_data(client,
- ADM1021_REG_DEV_ID) & 0xF0) == 0x30)
- kind = adm1023;
- else
- kind = adm1021;
- else if (i == 0x49)
- kind = thmc10;
- else if (i == 0x23)
- kind = gl523sm;
- else if ((i == 0x4d) &&
- (i2c_smbus_read_byte_data(client,
- ADM1021_REG_DEV_ID) == 0x01))
- kind = max1617a;
- else if (i == 0x54)
- kind = mc1066;
- /* LM84 Mfr ID in a different place, and it has more unused bits */
- else if (conv_rate == 0x00
- && (kind == 0 /* skip extra detection */
- || ((config & 0x7F) == 0x00
- && (status & 0xAB) == 0x00)))
- kind = lm84;
- else
- kind = max1617;
- }
+ man_id = i2c_smbus_read_byte_data(client, ADM1021_REG_MAN_ID);
+ dev_id = i2c_smbus_read_byte_data(client, ADM1021_REG_DEV_ID);
- if (kind == max1617) {
- type_name = "max1617";
- } else if (kind == max1617a) {
+ if (man_id == 0x4d && dev_id == 0x01)
type_name = "max1617a";
- } else if (kind == adm1021) {
- type_name = "adm1021";
- } else if (kind == adm1023) {
- type_name = "adm1023";
- } else if (kind == thmc10) {
+ else if (man_id == 0x41) {
+ if ((dev_id & 0xF0) == 0x30)
+ type_name = "adm1023";
+ else
+ type_name = "adm1021";
+ } else if (man_id == 0x49)
type_name = "thmc10";
- } else if (kind == lm84) {
- type_name = "lm84";
- } else if (kind == gl523sm) {
+ else if (man_id == 0x23)
type_name = "gl523sm";
- } else if (kind == mc1066) {
+ else if (man_id == 0x54)
type_name = "mc1066";
- }
+ /* LM84 Mfr ID in a different place, and it has more unused bits */
+ else if (conv_rate == 0x00
+ && (config & 0x7F) == 0x00
+ && (status & 0xAB) == 0x00)
+ type_name = "lm84";
+ else
+ type_name = "max1617";
+
pr_debug("adm1021: Detected chip %s at adapter %d, address 0x%02x.\n",
type_name, i2c_adapter_id(adapter), client->addr);
strlcpy(info->type, type_name, I2C_NAME_SIZE);
diff --git a/drivers/hwmon/adm1025.c b/drivers/hwmon/adm1025.c
index 4db04d603ec9c7feed84b7fdeba670c480310fad..db6ac2b04f6f867ba2803b279539059faf4735db 100644
--- a/drivers/hwmon/adm1025.c
+++ b/drivers/hwmon/adm1025.c
@@ -2,7 +2,7 @@
* adm1025.c
*
* Copyright (C) 2000 Chen-Yuan Wu <gwu@esoft.com>
- * Copyright (C) 2003-2008 Jean Delvare <khali@linux-fr.org>
+ * Copyright (C) 2003-2009 Jean Delvare <khali@linux-fr.org>
*
* The ADM1025 is a sensor chip made by Analog Devices. It reports up to 6
* voltages (including its own power source) and up to two temperatures
@@ -413,67 +413,34 @@ static int adm1025_detect(struct i2c_client *client, int kind,
struct i2c_board_info *info)
{
struct i2c_adapter *adapter = client->adapter;
- const char *name = "";
- u8 config;
+ const char *name;
+ u8 man_id, chip_id;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
return -ENODEV;
- /*
- * Now we do the remaining detection. A negative kind means that
- * the driver was loaded with no force parameter (default), so we
- * must both detect and identify the chip. A zero kind means that
- * the driver was loaded with the force parameter, the detection
- * step shall be skipped. A positive kind means that the driver
- * was loaded with the force parameter and a given kind of chip is
- * requested, so both the detection and the identification steps
- * are skipped.
- */
- config = i2c_smbus_read_byte_data(client, ADM1025_REG_CONFIG);
- if (kind < 0) { /* detection */
- if ((config & 0x80) != 0x00
- || (i2c_smbus_read_byte_data(client,
- ADM1025_REG_STATUS1) & 0xC0) != 0x00
- || (i2c_smbus_read_byte_data(client,
- ADM1025_REG_STATUS2) & 0xBC) != 0x00) {
- dev_dbg(&adapter->dev,
- "ADM1025 detection failed at 0x%02x.\n",
- client->addr);
- return -ENODEV;
- }
+ /* Check for unused bits */
+ if ((i2c_smbus_read_byte_data(client, ADM1025_REG_CONFIG) & 0x80)
+ || (i2c_smbus_read_byte_data(client, ADM1025_REG_STATUS1) & 0xC0)
+ || (i2c_smbus_read_byte_data(client, ADM1025_REG_STATUS2) & 0xBC)) {
+ dev_dbg(&adapter->dev, "ADM1025 detection failed at 0x%02x\n",
+ client->addr);
+ return -ENODEV;
}
- if (kind <= 0) { /* identification */
- u8 man_id, chip_id;
-
- man_id = i2c_smbus_read_byte_data(client, ADM1025_REG_MAN_ID);
- chip_id = i2c_smbus_read_byte_data(client, ADM1025_REG_CHIP_ID);
-
- if (man_id == 0x41) { /* Analog Devices */
- if ((chip_id & 0xF0) == 0x20) { /* ADM1025/ADM1025A */
- kind = adm1025;
- }
- } else
- if (man_id == 0xA1) { /* Philips */
- if (client->addr != 0x2E
- && (chip_id & 0xF0) == 0x20) { /* NE1619 */
- kind = ne1619;
- }
- }
-
- if (kind <= 0) { /* identification failed */
- dev_info(&adapter->dev,
- "Unsupported chip (man_id=0x%02X, "
- "chip_id=0x%02X).\n", man_id, chip_id);
- return -ENODEV;
- }
- }
+ /* Identification */
+ chip_id = i2c_smbus_read_byte_data(client, ADM1025_REG_CHIP_ID);
+ if ((chip_id & 0xF0) != 0x20)
+ return -ENODEV;
- if (kind == adm1025) {
+ man_id = i2c_smbus_read_byte_data(client, ADM1025_REG_MAN_ID);
+ if (man_id == 0x41)
name = "adm1025";
- } else if (kind == ne1619) {
+ else if (man_id == 0xA1 && client->addr != 0x2E)
name = "ne1619";
- }
+ else
+ return -ENODEV;
+
strlcpy(info->type, name, I2C_NAME_SIZE);
return 0;
diff --git a/drivers/hwmon/adm1026.c b/drivers/hwmon/adm1026.c
index ff7de40b6e35267c2836b03a98d4017e74e6414e..fb5363985e212d73bbef2132f6ce18e324855709 100644
--- a/drivers/hwmon/adm1026.c
+++ b/drivers/hwmon/adm1026.c
@@ -1672,35 +1672,26 @@ static int adm1026_detect(struct i2c_client *client, int kind,
i2c_adapter_id(client->adapter), client->addr,
company, verstep);
- /* If auto-detecting, Determine the chip type. */
- if (kind <= 0) {
- dev_dbg(&adapter->dev, "Autodetecting device at %d,0x%02x "
- "...\n", i2c_adapter_id(adapter), address);
- if (company == ADM1026_COMPANY_ANALOG_DEV
- && verstep == ADM1026_VERSTEP_ADM1026) {
- kind = adm1026;
- } else if (company == ADM1026_COMPANY_ANALOG_DEV
- && (verstep & 0xf0) == ADM1026_VERSTEP_GENERIC) {
- dev_err(&adapter->dev, "Unrecognized stepping "
- "0x%02x. Defaulting to ADM1026.\n", verstep);
- kind = adm1026;
- } else if ((verstep & 0xf0) == ADM1026_VERSTEP_GENERIC) {
- dev_err(&adapter->dev, "Found version/stepping "
- "0x%02x. Assuming generic ADM1026.\n",
- verstep);
- kind = any_chip;
- } else {
- dev_dbg(&adapter->dev, "Autodetection failed\n");
- /* Not an ADM1026 ... */
- if (kind == 0) { /* User used force=x,y */
- dev_err(&adapter->dev, "Generic ADM1026 not "
- "found at %d,0x%02x. Try "
- "force_adm1026.\n",
- i2c_adapter_id(adapter), address);
- }
- return -ENODEV;
- }
+ /* Determine the chip type. */
+ dev_dbg(&adapter->dev, "Autodetecting device at %d,0x%02x...\n",
+ i2c_adapter_id(adapter), address);
+ if (company == ADM1026_COMPANY_ANALOG_DEV
+ && verstep == ADM1026_VERSTEP_ADM1026) {
+ /* Analog Devices ADM1026 */
+ } else if (company == ADM1026_COMPANY_ANALOG_DEV
+ && (verstep & 0xf0) == ADM1026_VERSTEP_GENERIC) {
+ dev_err(&adapter->dev, "Unrecognized stepping "
+ "0x%02x. Defaulting to ADM1026.\n", verstep);
+ } else if ((verstep & 0xf0) == ADM1026_VERSTEP_GENERIC) {
+ dev_err(&adapter->dev, "Found version/stepping "
+ "0x%02x. Assuming generic ADM1026.\n",
+ verstep);
+ } else {
+ dev_dbg(&adapter->dev, "Autodetection failed\n");
+ /* Not an ADM1026... */
+ return -ENODEV;
}
+
strlcpy(info->type, "adm1026", I2C_NAME_SIZE);
return 0;
diff --git a/drivers/hwmon/adm1029.c b/drivers/hwmon/adm1029.c
index e845b75ccee4f0553f55ca322372c252020c90ab..ef91e2a4a5673b9045c636a24adda1ae0734d187 100644
--- a/drivers/hwmon/adm1029.c
+++ b/drivers/hwmon/adm1029.c
@@ -301,59 +301,36 @@ static int adm1029_detect(struct i2c_client *client, int kind,
struct i2c_board_info *info)
{
struct i2c_adapter *adapter = client->adapter;
+ u8 man_id, chip_id, temp_devices_installed, nb_fan_support;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
return -ENODEV;
- /* Now we do the detection and identification. A negative kind
- * means that the driver was loaded with no force parameter
- * (default), so we must both detect and identify the chip
- * (actually there is only one possible kind of chip for now, adm1029).
- * A zero kind means that the driver was loaded with the force
- * parameter, the detection step shall be skipped. A positive kind
- * means that the driver was loaded with the force parameter and a
- * given kind of chip is requested, so both the detection and the
- * identification steps are skipped. */
-
- /* Default to an adm1029 if forced */
- if (kind == 0)
- kind = adm1029;
-
/* ADM1029 doesn't have CHIP ID, check just MAN ID
* For better detection we check also ADM1029_TEMP_DEVICES_INSTALLED,
* ADM1029_REG_NB_FAN_SUPPORT and compare it with possible values
* documented
*/
- if (kind <= 0) { /* identification */
- u8 man_id, chip_id, temp_devices_installed, nb_fan_support;
-
- man_id = i2c_smbus_read_byte_data(client, ADM1029_REG_MAN_ID);
- chip_id = i2c_smbus_read_byte_data(client, ADM1029_REG_CHIP_ID);
- temp_devices_installed = i2c_smbus_read_byte_data(client,
+ man_id = i2c_smbus_read_byte_data(client, ADM1029_REG_MAN_ID);
+ chip_id = i2c_smbus_read_byte_data(client, ADM1029_REG_CHIP_ID);
+ temp_devices_installed = i2c_smbus_read_byte_data(client,
ADM1029_REG_TEMP_DEVICES_INSTALLED);
- nb_fan_support = i2c_smbus_read_byte_data(client,
+ nb_fan_support = i2c_smbus_read_byte_data(client,
ADM1029_REG_NB_FAN_SUPPORT);
- /* 0x41 is Analog Devices */
- if (man_id == 0x41 && (temp_devices_installed & 0xf9) == 0x01
- && nb_fan_support == 0x03) {
- if ((chip_id & 0xF0) == 0x00) {
- kind = adm1029;
- } else {
- /* There are no "official" CHIP ID, so actually
- * we use Major/Minor revision for that */
- printk(KERN_INFO
- "adm1029: Unknown major revision %x, "
- "please let us know\n", chip_id);
- }
- }
+ /* 0x41 is Analog Devices */
+ if (man_id != 0x41 || (temp_devices_installed & 0xf9) != 0x01
+ || nb_fan_support != 0x03)
+ return -ENODEV;
- if (kind <= 0) { /* identification failed */
- pr_debug("adm1029: Unsupported chip (man_id=0x%02X, "
- "chip_id=0x%02X)\n", man_id, chip_id);
- return -ENODEV;
- }
+ if ((chip_id & 0xF0) != 0x00) {
+ /* There are no "official" CHIP ID, so actually
+ * we use Major/Minor revision for that */
+ pr_info("adm1029: Unknown major revision %x, "
+ "please let us know\n", chip_id);
+ return -ENODEV;
}
+
strlcpy(info->type, "adm1029", I2C_NAME_SIZE);
return 0;
diff --git a/drivers/hwmon/adm1031.c b/drivers/hwmon/adm1031.c
index 56905955352cac894b0c381bad597050be236438..0e722175aae0640f8b1922caa56d33c972c8b232 100644
--- a/drivers/hwmon/adm1031.c
+++ b/drivers/hwmon/adm1031.c
@@ -817,31 +817,19 @@ static int adm1031_detect(struct i2c_client *client, int kind,
struct i2c_board_info *info)
{
struct i2c_adapter *adapter = client->adapter;
- const char *name = "";
+ const char *name;
+ int id, co;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
return -ENODEV;
- if (kind < 0) {
- int id, co;
- id = i2c_smbus_read_byte_data(client, 0x3d);
- co = i2c_smbus_read_byte_data(client, 0x3e);
+ id = i2c_smbus_read_byte_data(client, 0x3d);
+ co = i2c_smbus_read_byte_data(client, 0x3e);
- if (!((id == 0x31 || id == 0x30) && co == 0x41))
- return -ENODEV;
- kind = (id == 0x30) ? adm1030 : adm1031;
- }
-
- if (kind <= 0)
- kind = adm1031;
+ if (!((id == 0x31 || id == 0x30) && co == 0x41))
+ return -ENODEV;
+ name = (id == 0x30) ? "adm1030" : "adm1031";
- /* Given the detected chip type, set the chip name and the
- * auto fan control helper table. */
- if (kind == adm1030) {
- name = "adm1030";
- } else if (kind == adm1031) {
- name = "adm1031";
- }
strlcpy(info->type, name, I2C_NAME_SIZE);
return 0;
diff --git a/drivers/hwmon/adm9240.c b/drivers/hwmon/adm9240.c
index 2444b15f2e9d1ec87fcd8958122be6819ae07cca..20e0481cc20611aca78cc4fa5f49f68bebcea16e 100644
--- a/drivers/hwmon/adm9240.c
+++ b/drivers/hwmon/adm9240.c
@@ -556,51 +556,34 @@ static int adm9240_detect(struct i2c_client *new_client, int kind,
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
return -ENODEV;
- if (kind == 0) {
- kind = adm9240;
- }
-
- if (kind < 0) {
-
- /* verify chip: reg address should match i2c address */
- if (i2c_smbus_read_byte_data(new_client, ADM9240_REG_I2C_ADDR)
- != address) {
- dev_err(&adapter->dev, "detect fail: address match, "
- "0x%02x\n", address);
- return -ENODEV;
- }
-
- /* check known chip manufacturer */
- man_id = i2c_smbus_read_byte_data(new_client,
- ADM9240_REG_MAN_ID);
- if (man_id == 0x23) {
- kind = adm9240;
- } else if (man_id == 0xda) {
- kind = ds1780;
- } else if (man_id == 0x01) {
- kind = lm81;
- } else {
- dev_err(&adapter->dev, "detect fail: unknown manuf, "
- "0x%02x\n", man_id);
- return -ENODEV;
- }
-
- /* successful detect, print chip info */
- die_rev = i2c_smbus_read_byte_data(new_client,
- ADM9240_REG_DIE_REV);
- dev_info(&adapter->dev, "found %s revision %u\n",
- man_id == 0x23 ? "ADM9240" :
- man_id == 0xda ? "DS1780" : "LM81", die_rev);
+ /* verify chip: reg address should match i2c address */
+ if (i2c_smbus_read_byte_data(new_client, ADM9240_REG_I2C_ADDR)
+ != address) {
+ dev_err(&adapter->dev, "detect fail: address match, 0x%02x\n",
+ address);
+ return -ENODEV;
}
- /* either forced or detected chip kind */
- if (kind == adm9240) {
+ /* check known chip manufacturer */
+ man_id = i2c_smbus_read_byte_data(new_client, ADM9240_REG_MAN_ID);
+ if (man_id == 0x23) {
name = "adm9240";
- } else if (kind == ds1780) {
+ } else if (man_id == 0xda) {
name = "ds1780";
- } else if (kind == lm81) {
+ } else if (man_id == 0x01) {
name = "lm81";
+ } else {
+ dev_err(&adapter->dev, "detect fail: unknown manuf, 0x%02x\n",
+ man_id);
+ return -ENODEV;
}
+
+ /* successful detect, print chip info */
+ die_rev = i2c_smbus_read_byte_data(new_client, ADM9240_REG_DIE_REV);
+ dev_info(&adapter->dev, "found %s revision %u\n",
+ man_id == 0x23 ? "ADM9240" :
+ man_id == 0xda ? "DS1780" : "LM81", die_rev);
+
strlcpy(info->type, name, I2C_NAME_SIZE);
return 0;
diff --git a/drivers/hwmon/ads7828.c b/drivers/hwmon/ads7828.c
index 5c39b4af1b236723c96e9f4fd7ec19d6834d280d..451977bca7d6e02767f887951c58e8dd5c3b5cdf 100644
--- a/drivers/hwmon/ads7828.c
+++ b/drivers/hwmon/ads7828.c
@@ -191,6 +191,7 @@ static int ads7828_detect(struct i2c_client *client, int kind,
struct i2c_board_info *info)
{
struct i2c_adapter *adapter = client->adapter;
+ int ch;
/* Check we have a valid client */
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_READ_WORD_DATA))
@@ -202,20 +203,17 @@ static int ads7828_detect(struct i2c_client *client, int kind,
- Read from the 8 channel addresses
- Check the top 4 bits of each result are not set (12 data bits)
*/
- if (kind < 0) {
- int ch;
- for (ch = 0; ch < ADS7828_NCH; ch++) {
- u16 in_data;
- u8 cmd = channel_cmd_byte(ch);
- in_data = ads7828_read_value(client, cmd);
- if (in_data & 0xF000) {
- printk(KERN_DEBUG
- "%s : Doesn't look like an ads7828 device\n",
- __func__);
- return -ENODEV;
- }
+ for (ch = 0; ch < ADS7828_NCH; ch++) {
+ u16 in_data;
+ u8 cmd = channel_cmd_byte(ch);
+ in_data = ads7828_read_value(client, cmd);
+ if (in_data & 0xF000) {
+ pr_debug("%s : Doesn't look like an ads7828 device\n",
+ __func__);
+ return -ENODEV;
}
}
+
strlcpy(info->type, "ads7828", I2C_NAME_SIZE);
return 0;
diff --git a/drivers/hwmon/adt7462.c b/drivers/hwmon/adt7462.c
index 1852f27bac51fbd9a37a6abe07fe10b50b9b7a6c..f9c9562b6a94f0e6f136528c9831922f5119b4ae 100644
--- a/drivers/hwmon/adt7462.c
+++ b/drivers/hwmon/adt7462.c
@@ -1906,27 +1906,22 @@ static int adt7462_detect(struct i2c_client *client, int kind,
struct i2c_board_info *info)
{
struct i2c_adapter *adapter = client->adapter;
+ int vendor, device, revision;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
return -ENODEV;
- if (kind <= 0) {
- int vendor, device, revision;
-
- vendor = i2c_smbus_read_byte_data(client, ADT7462_REG_VENDOR);
- if (vendor != ADT7462_VENDOR)
- return -ENODEV;
+ vendor = i2c_smbus_read_byte_data(client, ADT7462_REG_VENDOR);
+ if (vendor != ADT7462_VENDOR)
+ return -ENODEV;
- device = i2c_smbus_read_byte_data(client, ADT7462_REG_DEVICE);
- if (device != ADT7462_DEVICE)
- return -ENODEV;
+ device = i2c_smbus_read_byte_data(client, ADT7462_REG_DEVICE);
+ if (device != ADT7462_DEVICE)
+ return -ENODEV;
- revision = i2c_smbus_read_byte_data(client,
- ADT7462_REG_REVISION);
- if (revision != ADT7462_REVISION)
- return -ENODEV;
- } else
- dev_dbg(&adapter->dev, "detection forced\n");
+ revision = i2c_smbus_read_byte_data(client, ADT7462_REG_REVISION);
+ if (revision != ADT7462_REVISION)
+ return -ENODEV;
strlcpy(info->type, "adt7462", I2C_NAME_SIZE);
diff --git a/drivers/hwmon/adt7470.c b/drivers/hwmon/adt7470.c
index 633e1a1e9d79843f1d8feebbb276e737903b685f..32b1750a6890bb41e95bca0df47027637a3e6d65 100644
--- a/drivers/hwmon/adt7470.c
+++ b/drivers/hwmon/adt7470.c
@@ -1229,27 +1229,22 @@ static int adt7470_detect(struct i2c_client *client, int kind,
struct i2c_board_info *info)
{
struct i2c_adapter *adapter = client->adapter;
+ int vendor, device, revision;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
return -ENODEV;
- if (kind <= 0) {
- int vendor, device, revision;
-
- vendor = i2c_smbus_read_byte_data(client, ADT7470_REG_VENDOR);
- if (vendor != ADT7470_VENDOR)
- return -ENODEV;
+ vendor = i2c_smbus_read_byte_data(client, ADT7470_REG_VENDOR);
+ if (vendor != ADT7470_VENDOR)
+ return -ENODEV;
- device = i2c_smbus_read_byte_data(client, ADT7470_REG_DEVICE);
- if (device != ADT7470_DEVICE)
- return -ENODEV;
+ device = i2c_smbus_read_byte_data(client, ADT7470_REG_DEVICE);
+ if (device != ADT7470_DEVICE)
+ return -ENODEV;
- revision = i2c_smbus_read_byte_data(client,
- ADT7470_REG_REVISION);
- if (revision != ADT7470_REVISION)
- return -ENODEV;
- } else
- dev_dbg(&adapter->dev, "detection forced\n");
+ revision = i2c_smbus_read_byte_data(client, ADT7470_REG_REVISION);
+ if (revision != ADT7470_REVISION)
+ return -ENODEV;
strlcpy(info->type, "adt7470", I2C_NAME_SIZE);
diff --git a/drivers/hwmon/adt7473.c b/drivers/hwmon/adt7473.c
index 0a6ce2367b42ae62bf2644a30bd2b5a739be2df4..aea244db974e1acfdf63a552f649ddc1fea063b9 100644
--- a/drivers/hwmon/adt7473.c
+++ b/drivers/hwmon/adt7473.c
@@ -174,7 +174,6 @@ static const struct i2c_device_id adt7473_id[] = {
{ "adt7473", adt7473 },
{ }
};
-MODULE_DEVICE_TABLE(i2c, adt7473_id);
static struct i2c_driver adt7473_driver = {
.class = I2C_CLASS_HWMON,
@@ -1090,27 +1089,22 @@ static int adt7473_detect(struct i2c_client *client, int kind,
struct i2c_board_info *info)
{
struct i2c_adapter *adapter = client->adapter;
+ int vendor, device, revision;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
return -ENODEV;
- if (kind <= 0) {
- int vendor, device, revision;
-
- vendor = i2c_smbus_read_byte_data(client, ADT7473_REG_VENDOR);
- if (vendor != ADT7473_VENDOR)
- return -ENODEV;
+ vendor = i2c_smbus_read_byte_data(client, ADT7473_REG_VENDOR);
+ if (vendor != ADT7473_VENDOR)
+ return -ENODEV;
- device = i2c_smbus_read_byte_data(client, ADT7473_REG_DEVICE);
- if (device != ADT7473_DEVICE)
- return -ENODEV;
+ device = i2c_smbus_read_byte_data(client, ADT7473_REG_DEVICE);
+ if (device != ADT7473_DEVICE)
+ return -ENODEV;
- revision = i2c_smbus_read_byte_data(client,
- ADT7473_REG_REVISION);
- if (revision != ADT7473_REV_68 && revision != ADT7473_REV_69)
- return -ENODEV;
- } else
- dev_dbg(&adapter->dev, "detection forced\n");
+ revision = i2c_smbus_read_byte_data(client, ADT7473_REG_REVISION);
+ if (revision != ADT7473_REV_68 && revision != ADT7473_REV_69)
+ return -ENODEV;
strlcpy(info->type, "adt7473", I2C_NAME_SIZE);
@@ -1171,6 +1165,8 @@ static int adt7473_remove(struct i2c_client *client)
static int __init adt7473_init(void)
{
+ pr_notice("The adt7473 driver is deprecated, please use the adt7475 "
+ "driver instead\n");
return i2c_add_driver(&adt7473_driver);
}
diff --git a/drivers/hwmon/adt7475.c b/drivers/hwmon/adt7475.c
index b5a95193c694a44f5c142cd9e5d1fd52c10b93b6..99abfddedbc3b842be2c017c0eb2e071693917e5 100644
--- a/drivers/hwmon/adt7475.c
+++ b/drivers/hwmon/adt7475.c
@@ -3,7 +3,8 @@
* Copyright (C) 2007-2008, Advanced Micro Devices, Inc.
* Copyright (C) 2008 Jordan Crouse <jordan@cosmicpenguin.net>
* Copyright (C) 2008 Hans de Goede <hdegoede@redhat.com>
-
+ * Copyright (C) 2009 Jean Delvare <khali@linux-fr.org>
+ *
* Derived from the lm83 driver by Jean Delvare
*
* This program is free software; you can redistribute it and/or modify
@@ -17,6 +18,7 @@
#include <linux/i2c.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
+#include <linux/hwmon-vid.h>
#include <linux/err.h>
/* Indexes for the sysfs hooks */
@@ -39,7 +41,12 @@
/* 7475 Common Registers */
-#define REG_VOLTAGE_BASE 0x21
+#define REG_DEVREV2 0x12 /* ADT7490 only */
+
+#define REG_VTT 0x1E /* ADT7490 only */
+#define REG_EXTEND3 0x1F /* ADT7490 only */
+
+#define REG_VOLTAGE_BASE 0x20
#define REG_TEMP_BASE 0x25
#define REG_TACH_BASE 0x28
#define REG_PWM_BASE 0x30
@@ -47,12 +54,15 @@
#define REG_DEVID 0x3D
#define REG_VENDID 0x3E
+#define REG_DEVID2 0x3F
#define REG_STATUS1 0x41
#define REG_STATUS2 0x42
-#define REG_VOLTAGE_MIN_BASE 0x46
-#define REG_VOLTAGE_MAX_BASE 0x47
+#define REG_VID 0x43 /* ADT7476 only */
+
+#define REG_VOLTAGE_MIN_BASE 0x44
+#define REG_VOLTAGE_MAX_BASE 0x45
#define REG_TEMP_MIN_BASE 0x4E
#define REG_TEMP_MAX_BASE 0x4F
@@ -73,16 +83,39 @@
#define REG_TEMP_OFFSET_BASE 0x70
+#define REG_CONFIG2 0x73
+
#define REG_EXTEND1 0x76
#define REG_EXTEND2 0x77
+
+#define REG_CONFIG3 0x78
#define REG_CONFIG5 0x7C
+#define REG_CONFIG4 0x7D
+
+#define REG_STATUS4 0x81 /* ADT7490 only */
+
+#define REG_VTT_MIN 0x84 /* ADT7490 only */
+#define REG_VTT_MAX 0x86 /* ADT7490 only */
+
+#define VID_VIDSEL 0x80 /* ADT7476 only */
+
+#define CONFIG2_ATTN 0x20
+
+#define CONFIG3_SMBALERT 0x01
+#define CONFIG3_THERM 0x02
+
+#define CONFIG4_PINFUNC 0x03
+#define CONFIG4_MAXDUTY 0x08
+#define CONFIG4_ATTN_IN10 0x30
+#define CONFIG4_ATTN_IN43 0xC0
#define CONFIG5_TWOSCOMP 0x01
#define CONFIG5_TEMPOFFSET 0x02
+#define CONFIG5_VIDGPIO 0x10 /* ADT7476 only */
/* ADT7475 Settings */
-#define ADT7475_VOLTAGE_COUNT 2
+#define ADT7475_VOLTAGE_COUNT 5 /* Not counting Vtt */
#define ADT7475_TEMP_COUNT 3
#define ADT7475_TACH_COUNT 4
#define ADT7475_PWM_COUNT 3
@@ -113,12 +146,15 @@
#define TEMP_OFFSET_REG(idx) (REG_TEMP_OFFSET_BASE + (idx))
#define TEMP_TRANGE_REG(idx) (REG_TEMP_TRANGE_BASE + (idx))
-static unsigned short normal_i2c[] = { 0x2e, I2C_CLIENT_END };
+static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END };
-I2C_CLIENT_INSMOD_1(adt7475);
+I2C_CLIENT_INSMOD_4(adt7473, adt7475, adt7476, adt7490);
static const struct i2c_device_id adt7475_id[] = {
+ { "adt7473", adt7473 },
{ "adt7475", adt7475 },
+ { "adt7476", adt7476 },
+ { "adt7490", adt7490 },
{ }
};
MODULE_DEVICE_TABLE(i2c, adt7475_id);
@@ -131,15 +167,24 @@ struct adt7475_data {
unsigned long limits_updated;
char valid;
+ u8 config4;
u8 config5;
- u16 alarms;
- u16 voltage[3][3];
+ u8 has_voltage;
+ u8 bypass_attn; /* Bypass voltage attenuator */
+ u8 has_pwm2:1;
+ u8 has_fan4:1;
+ u8 has_vid:1;
+ u32 alarms;
+ u16 voltage[3][6];
u16 temp[7][3];
u16 tach[2][4];
u8 pwm[4][3];
u8 range[3];
u8 pwmctl[3];
u8 pwmchan[3];
+
+ u8 vid;
+ u8 vrm;
};
static struct i2c_driver adt7475_driver;
@@ -196,26 +241,35 @@ static inline u16 rpm2tach(unsigned long rpm)
return SENSORS_LIMIT((90000 * 60) / rpm, 1, 0xFFFF);
}
-static inline int reg2vcc(u16 reg)
-{
- return (4296 * reg) / 1000;
-}
+/* Scaling factors for voltage inputs, taken from the ADT7490 datasheet */
+static const int adt7473_in_scaling[ADT7475_VOLTAGE_COUNT + 1][2] = {
+ { 45, 94 }, /* +2.5V */
+ { 175, 525 }, /* Vccp */
+ { 68, 71 }, /* Vcc */
+ { 93, 47 }, /* +5V */
+ { 120, 20 }, /* +12V */
+ { 45, 45 }, /* Vtt */
+};
-static inline int reg2vccp(u16 reg)
+static inline int reg2volt(int channel, u16 reg, u8 bypass_attn)
{
- return (2929 * reg) / 1000;
-}
+ const int *r = adt7473_in_scaling[channel];
-static inline u16 vcc2reg(long vcc)
-{
- vcc = SENSORS_LIMIT(vcc, 0, 4396);
- return (vcc * 1000) / 4296;
+ if (bypass_attn & (1 << channel))
+ return DIV_ROUND_CLOSEST(reg * 2250, 1024);
+ return DIV_ROUND_CLOSEST(reg * (r[0] + r[1]) * 2250, r[1] * 1024);
}
-static inline u16 vccp2reg(long vcc)
+static inline u16 volt2reg(int channel, long volt, u8 bypass_attn)
{
- vcc = SENSORS_LIMIT(vcc, 0, 2998);
- return (vcc * 1000) / 2929;
+ const int *r = adt7473_in_scaling[channel];
+ long reg;
+
+ if (bypass_attn & (1 << channel))
+ reg = (volt * 1024) / 2250;
+ else
+ reg = (volt * r[1] * 1024) / ((r[0] + r[1]) * 2250);
+ return SENSORS_LIMIT(reg, 0, 1023) & (0xff << 2);
}
static u16 adt7475_read_word(struct i2c_client *client, int reg)
@@ -271,12 +325,11 @@ static ssize_t show_voltage(struct device *dev, struct device_attribute *attr,
switch (sattr->nr) {
case ALARM:
return sprintf(buf, "%d\n",
- (data->alarms >> (sattr->index + 1)) & 1);
+ (data->alarms >> sattr->index) & 1);
default:
val = data->voltage[sattr->nr][sattr->index];
return sprintf(buf, "%d\n",
- sattr->index ==
- 0 ? reg2vccp(val) : reg2vcc(val));
+ reg2volt(sattr->index, val, data->bypass_attn));
}
}
@@ -296,12 +349,19 @@ static ssize_t set_voltage(struct device *dev, struct device_attribute *attr,
mutex_lock(&data->lock);
data->voltage[sattr->nr][sattr->index] =
- sattr->index ? vcc2reg(val) : vccp2reg(val);
+ volt2reg(sattr->index, val, data->bypass_attn);
- if (sattr->nr == MIN)
- reg = VOLTAGE_MIN_REG(sattr->index);
- else
- reg = VOLTAGE_MAX_REG(sattr->index);
+ if (sattr->index < ADT7475_VOLTAGE_COUNT) {
+ if (sattr->nr == MIN)
+ reg = VOLTAGE_MIN_REG(sattr->index);
+ else
+ reg = VOLTAGE_MAX_REG(sattr->index);
+ } else {
+ if (sattr->nr == MIN)
+ reg = REG_VTT_MIN;
+ else
+ reg = REG_VTT_MAX;
+ }
i2c_smbus_write_byte_data(client, reg,
data->voltage[sattr->nr][sattr->index] >> 2);
@@ -778,18 +838,103 @@ static ssize_t set_pwmfreq(struct device *dev, struct device_attribute *attr,
return count;
}
-static SENSOR_DEVICE_ATTR_2(in1_input, S_IRUGO, show_voltage, NULL, INPUT, 0);
-static SENSOR_DEVICE_ATTR_2(in1_max, S_IRUGO | S_IWUSR, show_voltage,
+static ssize_t show_pwm_at_crit(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ struct adt7475_data *data = adt7475_update_device(dev);
+ return sprintf(buf, "%d\n", !!(data->config4 & CONFIG4_MAXDUTY));
+}
+
+static ssize_t set_pwm_at_crit(struct device *dev,
+ struct device_attribute *devattr,
+ const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct adt7475_data *data = i2c_get_clientdata(client);
+ long val;
+
+ if (strict_strtol(buf, 10, &val))
+ return -EINVAL;
+ if (val != 0 && val != 1)
+ return -EINVAL;
+
+ mutex_lock(&data->lock);
+ data->config4 = i2c_smbus_read_byte_data(client, REG_CONFIG4);
+ if (val)
+ data->config4 |= CONFIG4_MAXDUTY;
+ else
+ data->config4 &= ~CONFIG4_MAXDUTY;
+ i2c_smbus_write_byte_data(client, REG_CONFIG4, data->config4);
+ mutex_unlock(&data->lock);
+
+ return count;
+}
+
+static ssize_t show_vrm(struct device *dev, struct device_attribute *devattr,
+ char *buf)
+{
+ struct adt7475_data *data = dev_get_drvdata(dev);
+ return sprintf(buf, "%d\n", (int)data->vrm);
+}
+
+static ssize_t set_vrm(struct device *dev, struct device_attribute *devattr,
+ const char *buf, size_t count)
+{
+ struct adt7475_data *data = dev_get_drvdata(dev);
+ long val;
+
+ if (strict_strtol(buf, 10, &val))
+ return -EINVAL;
+ if (val < 0 || val > 255)
+ return -EINVAL;
+ data->vrm = val;
+
+ return count;
+}
+
+static ssize_t show_vid(struct device *dev, struct device_attribute *devattr,
+ char *buf)
+{
+ struct adt7475_data *data = adt7475_update_device(dev);
+ return sprintf(buf, "%d\n", vid_from_reg(data->vid, data->vrm));
+}
+
+static SENSOR_DEVICE_ATTR_2(in0_input, S_IRUGO, show_voltage, NULL, INPUT, 0);
+static SENSOR_DEVICE_ATTR_2(in0_max, S_IRUGO | S_IWUSR, show_voltage,
set_voltage, MAX, 0);
-static SENSOR_DEVICE_ATTR_2(in1_min, S_IRUGO | S_IWUSR, show_voltage,
+static SENSOR_DEVICE_ATTR_2(in0_min, S_IRUGO | S_IWUSR, show_voltage,
set_voltage, MIN, 0);
-static SENSOR_DEVICE_ATTR_2(in1_alarm, S_IRUGO, show_voltage, NULL, ALARM, 0);
-static SENSOR_DEVICE_ATTR_2(in2_input, S_IRUGO, show_voltage, NULL, INPUT, 1);
-static SENSOR_DEVICE_ATTR_2(in2_max, S_IRUGO | S_IWUSR, show_voltage,
+static SENSOR_DEVICE_ATTR_2(in0_alarm, S_IRUGO, show_voltage, NULL, ALARM, 0);
+static SENSOR_DEVICE_ATTR_2(in1_input, S_IRUGO, show_voltage, NULL, INPUT, 1);
+static SENSOR_DEVICE_ATTR_2(in1_max, S_IRUGO | S_IWUSR, show_voltage,
set_voltage, MAX, 1);
-static SENSOR_DEVICE_ATTR_2(in2_min, S_IRUGO | S_IWUSR, show_voltage,
+static SENSOR_DEVICE_ATTR_2(in1_min, S_IRUGO | S_IWUSR, show_voltage,
set_voltage, MIN, 1);
-static SENSOR_DEVICE_ATTR_2(in2_alarm, S_IRUGO, show_voltage, NULL, ALARM, 1);
+static SENSOR_DEVICE_ATTR_2(in1_alarm, S_IRUGO, show_voltage, NULL, ALARM, 1);
+static SENSOR_DEVICE_ATTR_2(in2_input, S_IRUGO, show_voltage, NULL, INPUT, 2);
+static SENSOR_DEVICE_ATTR_2(in2_max, S_IRUGO | S_IWUSR, show_voltage,
+ set_voltage, MAX, 2);
+static SENSOR_DEVICE_ATTR_2(in2_min, S_IRUGO | S_IWUSR, show_voltage,
+ set_voltage, MIN, 2);
+static SENSOR_DEVICE_ATTR_2(in2_alarm, S_IRUGO, show_voltage, NULL, ALARM, 2);
+static SENSOR_DEVICE_ATTR_2(in3_input, S_IRUGO, show_voltage, NULL, INPUT, 3);
+static SENSOR_DEVICE_ATTR_2(in3_max, S_IRUGO | S_IWUSR, show_voltage,
+ set_voltage, MAX, 3);
+static SENSOR_DEVICE_ATTR_2(in3_min, S_IRUGO | S_IWUSR, show_voltage,
+ set_voltage, MIN, 3);
+static SENSOR_DEVICE_ATTR_2(in3_alarm, S_IRUGO, show_voltage, NULL, ALARM, 3);
+static SENSOR_DEVICE_ATTR_2(in4_input, S_IRUGO, show_voltage, NULL, INPUT, 4);
+static SENSOR_DEVICE_ATTR_2(in4_max, S_IRUGO | S_IWUSR, show_voltage,
+ set_voltage, MAX, 4);
+static SENSOR_DEVICE_ATTR_2(in4_min, S_IRUGO | S_IWUSR, show_voltage,
+ set_voltage, MIN, 4);
+static SENSOR_DEVICE_ATTR_2(in4_alarm, S_IRUGO, show_voltage, NULL, ALARM, 8);
+static SENSOR_DEVICE_ATTR_2(in5_input, S_IRUGO, show_voltage, NULL, INPUT, 5);
+static SENSOR_DEVICE_ATTR_2(in5_max, S_IRUGO | S_IWUSR, show_voltage,
+ set_voltage, MAX, 5);
+static SENSOR_DEVICE_ATTR_2(in5_min, S_IRUGO | S_IWUSR, show_voltage,
+ set_voltage, MIN, 5);
+static SENSOR_DEVICE_ATTR_2(in5_alarm, S_IRUGO, show_voltage, NULL, ALARM, 31);
static SENSOR_DEVICE_ATTR_2(temp1_input, S_IRUGO, show_temp, NULL, INPUT, 0);
static SENSOR_DEVICE_ATTR_2(temp1_alarm, S_IRUGO, show_temp, NULL, ALARM, 0);
static SENSOR_DEVICE_ATTR_2(temp1_fault, S_IRUGO, show_temp, NULL, FAULT, 0);
@@ -893,6 +1038,13 @@ static SENSOR_DEVICE_ATTR_2(pwm3_auto_point1_pwm, S_IRUGO | S_IWUSR, show_pwm,
static SENSOR_DEVICE_ATTR_2(pwm3_auto_point2_pwm, S_IRUGO | S_IWUSR, show_pwm,
set_pwm, MAX, 2);
+/* Non-standard name, might need revisiting */
+static DEVICE_ATTR(pwm_use_point2_pwm_at_crit, S_IWUSR | S_IRUGO,
+ show_pwm_at_crit, set_pwm_at_crit);
+
+static DEVICE_ATTR(vrm, S_IWUSR | S_IRUGO, show_vrm, set_vrm);
+static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid, NULL);
+
static struct attribute *adt7475_attrs[] = {
&sensor_dev_attr_in1_input.dev_attr.attr,
&sensor_dev_attr_in1_max.dev_attr.attr,
@@ -940,60 +1092,156 @@ static struct attribute *adt7475_attrs[] = {
&sensor_dev_attr_fan3_input.dev_attr.attr,
&sensor_dev_attr_fan3_min.dev_attr.attr,
&sensor_dev_attr_fan3_alarm.dev_attr.attr,
- &sensor_dev_attr_fan4_input.dev_attr.attr,
- &sensor_dev_attr_fan4_min.dev_attr.attr,
- &sensor_dev_attr_fan4_alarm.dev_attr.attr,
&sensor_dev_attr_pwm1.dev_attr.attr,
&sensor_dev_attr_pwm1_freq.dev_attr.attr,
&sensor_dev_attr_pwm1_enable.dev_attr.attr,
&sensor_dev_attr_pwm1_auto_channels_temp.dev_attr.attr,
&sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr,
&sensor_dev_attr_pwm1_auto_point2_pwm.dev_attr.attr,
- &sensor_dev_attr_pwm2.dev_attr.attr,
- &sensor_dev_attr_pwm2_freq.dev_attr.attr,
- &sensor_dev_attr_pwm2_enable.dev_attr.attr,
- &sensor_dev_attr_pwm2_auto_channels_temp.dev_attr.attr,
- &sensor_dev_attr_pwm2_auto_point1_pwm.dev_attr.attr,
- &sensor_dev_attr_pwm2_auto_point2_pwm.dev_attr.attr,
&sensor_dev_attr_pwm3.dev_attr.attr,
&sensor_dev_attr_pwm3_freq.dev_attr.attr,
&sensor_dev_attr_pwm3_enable.dev_attr.attr,
&sensor_dev_attr_pwm3_auto_channels_temp.dev_attr.attr,
&sensor_dev_attr_pwm3_auto_point1_pwm.dev_attr.attr,
&sensor_dev_attr_pwm3_auto_point2_pwm.dev_attr.attr,
+ &dev_attr_pwm_use_point2_pwm_at_crit.attr,
NULL,
};
-struct attribute_group adt7475_attr_group = { .attrs = adt7475_attrs };
+static struct attribute *fan4_attrs[] = {
+ &sensor_dev_attr_fan4_input.dev_attr.attr,
+ &sensor_dev_attr_fan4_min.dev_attr.attr,
+ &sensor_dev_attr_fan4_alarm.dev_attr.attr,
+ NULL
+};
+
+static struct attribute *pwm2_attrs[] = {
+ &sensor_dev_attr_pwm2.dev_attr.attr,
+ &sensor_dev_attr_pwm2_freq.dev_attr.attr,
+ &sensor_dev_attr_pwm2_enable.dev_attr.attr,
+ &sensor_dev_attr_pwm2_auto_channels_temp.dev_attr.attr,
+ &sensor_dev_attr_pwm2_auto_point1_pwm.dev_attr.attr,
+ &sensor_dev_attr_pwm2_auto_point2_pwm.dev_attr.attr,
+ NULL
+};
+
+static struct attribute *in0_attrs[] = {
+ &sensor_dev_attr_in0_input.dev_attr.attr,
+ &sensor_dev_attr_in0_max.dev_attr.attr,
+ &sensor_dev_attr_in0_min.dev_attr.attr,
+ &sensor_dev_attr_in0_alarm.dev_attr.attr,
+ NULL
+};
+
+static struct attribute *in3_attrs[] = {
+ &sensor_dev_attr_in3_input.dev_attr.attr,
+ &sensor_dev_attr_in3_max.dev_attr.attr,
+ &sensor_dev_attr_in3_min.dev_attr.attr,
+ &sensor_dev_attr_in3_alarm.dev_attr.attr,
+ NULL
+};
+
+static struct attribute *in4_attrs[] = {
+ &sensor_dev_attr_in4_input.dev_attr.attr,
+ &sensor_dev_attr_in4_max.dev_attr.attr,
+ &sensor_dev_attr_in4_min.dev_attr.attr,
+ &sensor_dev_attr_in4_alarm.dev_attr.attr,
+ NULL
+};
+
+static struct attribute *in5_attrs[] = {
+ &sensor_dev_attr_in5_input.dev_attr.attr,
+ &sensor_dev_attr_in5_max.dev_attr.attr,
+ &sensor_dev_attr_in5_min.dev_attr.attr,
+ &sensor_dev_attr_in5_alarm.dev_attr.attr,
+ NULL
+};
+
+static struct attribute *vid_attrs[] = {
+ &dev_attr_cpu0_vid.attr,
+ &dev_attr_vrm.attr,
+ NULL
+};
+
+static struct attribute_group adt7475_attr_group = { .attrs = adt7475_attrs };
+static struct attribute_group fan4_attr_group = { .attrs = fan4_attrs };
+static struct attribute_group pwm2_attr_group = { .attrs = pwm2_attrs };
+static struct attribute_group in0_attr_group = { .attrs = in0_attrs };
+static struct attribute_group in3_attr_group = { .attrs = in3_attrs };
+static struct attribute_group in4_attr_group = { .attrs = in4_attrs };
+static struct attribute_group in5_attr_group = { .attrs = in5_attrs };
+static struct attribute_group vid_attr_group = { .attrs = vid_attrs };
static int adt7475_detect(struct i2c_client *client, int kind,
struct i2c_board_info *info)
{
struct i2c_adapter *adapter = client->adapter;
+ int vendid, devid, devid2;
+ const char *name;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
return -ENODEV;
- if (kind <= 0) {
- if (adt7475_read(REG_VENDID) != 0x41 ||
- adt7475_read(REG_DEVID) != 0x75) {
- dev_err(&adapter->dev,
- "Couldn't detect a adt7475 part at 0x%02x\n",
- (unsigned int)client->addr);
- return -ENODEV;
- }
+ vendid = adt7475_read(REG_VENDID);
+ devid2 = adt7475_read(REG_DEVID2);
+ if (vendid != 0x41 || /* Analog Devices */
+ (devid2 & 0xf8) != 0x68)
+ return -ENODEV;
+
+ devid = adt7475_read(REG_DEVID);
+ if (devid == 0x73)
+ name = "adt7473";
+ else if (devid == 0x75 && client->addr == 0x2e)
+ name = "adt7475";
+ else if (devid == 0x76)
+ name = "adt7476";
+ else if ((devid2 & 0xfc) == 0x6c)
+ name = "adt7490";
+ else {
+ dev_dbg(&adapter->dev,
+ "Couldn't detect an ADT7473/75/76/90 part at "
+ "0x%02x\n", (unsigned int)client->addr);
+ return -ENODEV;
}
- strlcpy(info->type, adt7475_id[0].name, I2C_NAME_SIZE);
+ strlcpy(info->type, name, I2C_NAME_SIZE);
return 0;
}
+static void adt7475_remove_files(struct i2c_client *client,
+ struct adt7475_data *data)
+{
+ sysfs_remove_group(&client->dev.kobj, &adt7475_attr_group);
+ if (data->has_fan4)
+ sysfs_remove_group(&client->dev.kobj, &fan4_attr_group);
+ if (data->has_pwm2)
+ sysfs_remove_group(&client->dev.kobj, &pwm2_attr_group);
+ if (data->has_voltage & (1 << 0))
+ sysfs_remove_group(&client->dev.kobj, &in0_attr_group);
+ if (data->has_voltage & (1 << 3))
+ sysfs_remove_group(&client->dev.kobj, &in3_attr_group);
+ if (data->has_voltage & (1 << 4))
+ sysfs_remove_group(&client->dev.kobj, &in4_attr_group);
+ if (data->has_voltage & (1 << 5))
+ sysfs_remove_group(&client->dev.kobj, &in5_attr_group);
+ if (data->has_vid)
+ sysfs_remove_group(&client->dev.kobj, &vid_attr_group);
+}
+
static int adt7475_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
+ static const char *names[] = {
+ [adt7473] = "ADT7473",
+ [adt7475] = "ADT7475",
+ [adt7476] = "ADT7476",
+ [adt7490] = "ADT7490",
+ };
+
struct adt7475_data *data;
- int i, ret = 0;
+ int i, ret = 0, revision;
+ u8 config2, config3;
data = kzalloc(sizeof(*data), GFP_KERNEL);
if (data == NULL)
@@ -1002,6 +1250,70 @@ static int adt7475_probe(struct i2c_client *client,
mutex_init(&data->lock);
i2c_set_clientdata(client, data);
+ /* Initialize device-specific values */
+ switch (id->driver_data) {
+ case adt7476:
+ data->has_voltage = 0x0e; /* in1 to in3 */
+ revision = adt7475_read(REG_DEVID2) & 0x07;
+ break;
+ case adt7490:
+ data->has_voltage = 0x3e; /* in1 to in5 */
+ revision = adt7475_read(REG_DEVID2) & 0x03;
+ if (revision == 0x03)
+ revision += adt7475_read(REG_DEVREV2);
+ break;
+ default:
+ data->has_voltage = 0x06; /* in1, in2 */
+ revision = adt7475_read(REG_DEVID2) & 0x07;
+ }
+
+ config3 = adt7475_read(REG_CONFIG3);
+ /* Pin PWM2 may alternatively be used for ALERT output */
+ if (!(config3 & CONFIG3_SMBALERT))
+ data->has_pwm2 = 1;
+ /* Meaning of this bit is inverted for the ADT7473-1 */
+ if (id->driver_data == adt7473 && revision >= 1)
+ data->has_pwm2 = !data->has_pwm2;
+
+ data->config4 = adt7475_read(REG_CONFIG4);
+ /* Pin TACH4 may alternatively be used for THERM */
+ if ((data->config4 & CONFIG4_PINFUNC) == 0x0)
+ data->has_fan4 = 1;
+
+ /* THERM configuration is more complex on the ADT7476 and ADT7490,
+ because 2 different pins (TACH4 and +2.5 Vin) can be used for
+ this function */
+ if (id->driver_data == adt7490) {
+ if ((data->config4 & CONFIG4_PINFUNC) == 0x1 &&
+ !(config3 & CONFIG3_THERM))
+ data->has_fan4 = 1;
+ }
+ if (id->driver_data == adt7476 || id->driver_data == adt7490) {
+ if (!(config3 & CONFIG3_THERM) ||
+ (data->config4 & CONFIG4_PINFUNC) == 0x1)
+ data->has_voltage |= (1 << 0); /* in0 */
+ }
+
+ /* On the ADT7476, the +12V input pin may instead be used as VID5,
+ and VID pins may alternatively be used as GPIO */
+ if (id->driver_data == adt7476) {
+ u8 vid = adt7475_read(REG_VID);
+ if (!(vid & VID_VIDSEL))
+ data->has_voltage |= (1 << 4); /* in4 */
+
+ data->has_vid = !(adt7475_read(REG_CONFIG5) & CONFIG5_VIDGPIO);
+ }
+
+ /* Voltage attenuators can be bypassed, globally or individually */
+ config2 = adt7475_read(REG_CONFIG2);
+ if (config2 & CONFIG2_ATTN) {
+ data->bypass_attn = (0x3 << 3) | 0x3;
+ } else {
+ data->bypass_attn = ((data->config4 & CONFIG4_ATTN_IN10) >> 4) |
+ ((data->config4 & CONFIG4_ATTN_IN43) >> 3);
+ }
+ data->bypass_attn &= data->has_voltage;
+
/* Call adt7475_read_pwm for all pwm's as this will reprogram any
pwm's which are disabled to manual mode with 0% duty cycle */
for (i = 0; i < ADT7475_PWM_COUNT; i++)
@@ -1011,16 +1323,70 @@ static int adt7475_probe(struct i2c_client *client,
if (ret)
goto efree;
+ /* Features that can be disabled individually */
+ if (data->has_fan4) {
+ ret = sysfs_create_group(&client->dev.kobj, &fan4_attr_group);
+ if (ret)
+ goto eremove;
+ }
+ if (data->has_pwm2) {
+ ret = sysfs_create_group(&client->dev.kobj, &pwm2_attr_group);
+ if (ret)
+ goto eremove;
+ }
+ if (data->has_voltage & (1 << 0)) {
+ ret = sysfs_create_group(&client->dev.kobj, &in0_attr_group);
+ if (ret)
+ goto eremove;
+ }
+ if (data->has_voltage & (1 << 3)) {
+ ret = sysfs_create_group(&client->dev.kobj, &in3_attr_group);
+ if (ret)
+ goto eremove;
+ }
+ if (data->has_voltage & (1 << 4)) {
+ ret = sysfs_create_group(&client->dev.kobj, &in4_attr_group);
+ if (ret)
+ goto eremove;
+ }
+ if (data->has_voltage & (1 << 5)) {
+ ret = sysfs_create_group(&client->dev.kobj, &in5_attr_group);
+ if (ret)
+ goto eremove;
+ }
+ if (data->has_vid) {
+ data->vrm = vid_which_vrm();
+ ret = sysfs_create_group(&client->dev.kobj, &vid_attr_group);
+ if (ret)
+ goto eremove;
+ }
+
data->hwmon_dev = hwmon_device_register(&client->dev);
if (IS_ERR(data->hwmon_dev)) {
ret = PTR_ERR(data->hwmon_dev);
goto eremove;
}
+ dev_info(&client->dev, "%s device, revision %d\n",
+ names[id->driver_data], revision);
+ if ((data->has_voltage & 0x11) || data->has_fan4 || data->has_pwm2)
+ dev_info(&client->dev, "Optional features:%s%s%s%s%s\n",
+ (data->has_voltage & (1 << 0)) ? " in0" : "",
+ (data->has_voltage & (1 << 4)) ? " in4" : "",
+ data->has_fan4 ? " fan4" : "",
+ data->has_pwm2 ? " pwm2" : "",
+ data->has_vid ? " vid" : "");
+ if (data->bypass_attn)
+ dev_info(&client->dev, "Bypassing attenuators on:%s%s%s%s\n",
+ (data->bypass_attn & (1 << 0)) ? " in0" : "",
+ (data->bypass_attn & (1 << 1)) ? " in1" : "",
+ (data->bypass_attn & (1 << 3)) ? " in3" : "",
+ (data->bypass_attn & (1 << 4)) ? " in4" : "");
+
return 0;
eremove:
- sysfs_remove_group(&client->dev.kobj, &adt7475_attr_group);
+ adt7475_remove_files(client, data);
efree:
kfree(data);
return ret;
@@ -1031,7 +1397,7 @@ static int adt7475_remove(struct i2c_client *client)
struct adt7475_data *data = i2c_get_clientdata(client);
hwmon_device_unregister(data->hwmon_dev);
- sysfs_remove_group(&client->dev.kobj, &adt7475_attr_group);
+ adt7475_remove_files(client, data);
kfree(data);
return 0;
@@ -1116,7 +1482,7 @@ static struct adt7475_data *adt7475_update_device(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct adt7475_data *data = i2c_get_clientdata(client);
- u8 ext;
+ u16 ext;
int i;
mutex_lock(&data->lock);
@@ -1127,25 +1493,44 @@ static struct adt7475_data *adt7475_update_device(struct device *dev)
data->alarms = adt7475_read(REG_STATUS2) << 8;
data->alarms |= adt7475_read(REG_STATUS1);
- ext = adt7475_read(REG_EXTEND1);
- for (i = 0; i < ADT7475_VOLTAGE_COUNT; i++)
+ ext = (adt7475_read(REG_EXTEND2) << 8) |
+ adt7475_read(REG_EXTEND1);
+ for (i = 0; i < ADT7475_VOLTAGE_COUNT; i++) {
+ if (!(data->has_voltage & (1 << i)))
+ continue;
data->voltage[INPUT][i] =
(adt7475_read(VOLTAGE_REG(i)) << 2) |
- ((ext >> ((i + 1) * 2)) & 3);
+ ((ext >> (i * 2)) & 3);
+ }
- ext = adt7475_read(REG_EXTEND2);
for (i = 0; i < ADT7475_TEMP_COUNT; i++)
data->temp[INPUT][i] =
(adt7475_read(TEMP_REG(i)) << 2) |
- ((ext >> ((i + 1) * 2)) & 3);
+ ((ext >> ((i + 5) * 2)) & 3);
- for (i = 0; i < ADT7475_TACH_COUNT; i++)
+ if (data->has_voltage & (1 << 5)) {
+ data->alarms |= adt7475_read(REG_STATUS4) << 24;
+ ext = adt7475_read(REG_EXTEND3);
+ data->voltage[INPUT][5] = adt7475_read(REG_VTT) << 2 |
+ ((ext >> 4) & 3);
+ }
+
+ for (i = 0; i < ADT7475_TACH_COUNT; i++) {
+ if (i == 3 && !data->has_fan4)
+ continue;
data->tach[INPUT][i] =
adt7475_read_word(client, TACH_REG(i));
+ }
/* Updated by hw when in auto mode */
- for (i = 0; i < ADT7475_PWM_COUNT; i++)
+ for (i = 0; i < ADT7475_PWM_COUNT; i++) {
+ if (i == 1 && !data->has_pwm2)
+ continue;
data->pwm[INPUT][i] = adt7475_read(PWM_REG(i));
+ }
+
+ if (data->has_vid)
+ data->vid = adt7475_read(REG_VID) & 0x3f;
data->measure_updated = jiffies;
}
@@ -1153,9 +1538,12 @@ static struct adt7475_data *adt7475_update_device(struct device *dev)
/* Limits and settings, should never change update every 60 seconds */
if (time_after(jiffies, data->limits_updated + HZ * 60) ||
!data->valid) {
+ data->config4 = adt7475_read(REG_CONFIG4);
data->config5 = adt7475_read(REG_CONFIG5);
for (i = 0; i < ADT7475_VOLTAGE_COUNT; i++) {
+ if (!(data->has_voltage & (1 << i)))
+ continue;
/* Adjust values so they match the input precision */
data->voltage[MIN][i] =
adt7475_read(VOLTAGE_MIN_REG(i)) << 2;
@@ -1163,6 +1551,11 @@ static struct adt7475_data *adt7475_update_device(struct device *dev)
adt7475_read(VOLTAGE_MAX_REG(i)) << 2;
}
+ if (data->has_voltage & (1 << 5)) {
+ data->voltage[MIN][5] = adt7475_read(REG_VTT_MIN) << 2;
+ data->voltage[MAX][5] = adt7475_read(REG_VTT_MAX) << 2;
+ }
+
for (i = 0; i < ADT7475_TEMP_COUNT; i++) {
/* Adjust values so they match the input precision */
data->temp[MIN][i] =
@@ -1178,11 +1571,16 @@ static struct adt7475_data *adt7475_update_device(struct device *dev)
}
adt7475_read_hystersis(client);
- for (i = 0; i < ADT7475_TACH_COUNT; i++)
+ for (i = 0; i < ADT7475_TACH_COUNT; i++) {
+ if (i == 3 && !data->has_fan4)
+ continue;
data->tach[MIN][i] =
adt7475_read_word(client, TACH_MIN_REG(i));
+ }
for (i = 0; i < ADT7475_PWM_COUNT; i++) {
+ if (i == 1 && !data->has_pwm2)
+ continue;
data->pwm[MAX][i] = adt7475_read(PWM_MAX_REG(i));
data->pwm[MIN][i] = adt7475_read(PWM_MIN_REG(i));
/* Set the channel and control information */
diff --git a/drivers/hwmon/asb100.c b/drivers/hwmon/asb100.c
index 8acf82977e7b4b4affa8d9135b8bbe3b7ab98440..480f80ea1fa00c1082ee7d89d381c8ba84a002ae 100644
--- a/drivers/hwmon/asb100.c
+++ b/drivers/hwmon/asb100.c
@@ -701,6 +701,7 @@ static int asb100_detect(struct i2c_client *client, int kind,
struct i2c_board_info *info)
{
struct i2c_adapter *adapter = client->adapter;
+ int val1, val2;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
pr_debug("asb100.o: detect failed, "
@@ -708,50 +709,30 @@ static int asb100_detect(struct i2c_client *client, int kind,
return -ENODEV;
}
- /* The chip may be stuck in some other bank than bank 0. This may
- make reading other information impossible. Specify a force=... or
- force_*=... parameter, and the chip will be reset to the right
- bank. */
- if (kind < 0) {
-
- int val1 = i2c_smbus_read_byte_data(client, ASB100_REG_BANK);
- int val2 = i2c_smbus_read_byte_data(client, ASB100_REG_CHIPMAN);
-
- /* If we're in bank 0 */
- if ((!(val1 & 0x07)) &&
- /* Check for ASB100 ID (low byte) */
- (((!(val1 & 0x80)) && (val2 != 0x94)) ||
- /* Check for ASB100 ID (high byte ) */
- ((val1 & 0x80) && (val2 != 0x06)))) {
- pr_debug("asb100.o: detect failed, "
- "bad chip id 0x%02x!\n", val2);
- return -ENODEV;
- }
+ val1 = i2c_smbus_read_byte_data(client, ASB100_REG_BANK);
+ val2 = i2c_smbus_read_byte_data(client, ASB100_REG_CHIPMAN);
- } /* kind < 0 */
+ /* If we're in bank 0 */
+ if ((!(val1 & 0x07)) &&
+ /* Check for ASB100 ID (low byte) */
+ (((!(val1 & 0x80)) && (val2 != 0x94)) ||
+ /* Check for ASB100 ID (high byte ) */
+ ((val1 & 0x80) && (val2 != 0x06)))) {
+ pr_debug("asb100: detect failed, bad chip id 0x%02x!\n", val2);
+ return -ENODEV;
+ }
- /* We have either had a force parameter, or we have already detected
- Winbond. Put it now into bank 0 and Vendor ID High Byte */
+ /* Put it now into bank 0 and Vendor ID High Byte */
i2c_smbus_write_byte_data(client, ASB100_REG_BANK,
(i2c_smbus_read_byte_data(client, ASB100_REG_BANK) & 0x78)
| 0x80);
/* Determine the chip type. */
- if (kind <= 0) {
- int val1 = i2c_smbus_read_byte_data(client, ASB100_REG_WCHIPID);
- int val2 = i2c_smbus_read_byte_data(client, ASB100_REG_CHIPMAN);
-
- if ((val1 == 0x31) && (val2 == 0x06))
- kind = asb100;
- else {
- if (kind == 0)
- dev_warn(&adapter->dev, "ignoring "
- "'force' parameter for unknown chip "
- "at adapter %d, address 0x%02x.\n",
- i2c_adapter_id(adapter), client->addr);
- return -ENODEV;
- }
- }
+ val1 = i2c_smbus_read_byte_data(client, ASB100_REG_WCHIPID);
+ val2 = i2c_smbus_read_byte_data(client, ASB100_REG_CHIPMAN);
+
+ if (val1 != 0x31 || val2 != 0x06)
+ return -ENODEV;
strlcpy(info->type, "asb100", I2C_NAME_SIZE);
diff --git a/drivers/hwmon/dme1737.c b/drivers/hwmon/dme1737.c
index 27d62574284fa14faefbaa754f53bdc0244bcbfc..4377bb0cc5269d755e1b20095a095feedfb1e592 100644
--- a/drivers/hwmon/dme1737.c
+++ b/drivers/hwmon/dme1737.c
@@ -2220,33 +2220,23 @@ static int dme1737_i2c_detect(struct i2c_client *client, int kind,
return -ENODEV;
}
- /* A negative kind means that the driver was loaded with no force
- * parameter (default), so we must identify the chip. */
- if (kind < 0) {
- company = i2c_smbus_read_byte_data(client, DME1737_REG_COMPANY);
- verstep = i2c_smbus_read_byte_data(client, DME1737_REG_VERSTEP);
-
- if (company == DME1737_COMPANY_SMSC &&
- (verstep & DME1737_VERSTEP_MASK) == DME1737_VERSTEP) {
- kind = dme1737;
- } else if (company == DME1737_COMPANY_SMSC &&
- verstep == SCH5027_VERSTEP) {
- kind = sch5027;
- } else {
- return -ENODEV;
- }
- }
+ company = i2c_smbus_read_byte_data(client, DME1737_REG_COMPANY);
+ verstep = i2c_smbus_read_byte_data(client, DME1737_REG_VERSTEP);
- if (kind == sch5027) {
+ if (company == DME1737_COMPANY_SMSC &&
+ verstep == SCH5027_VERSTEP) {
name = "sch5027";
- } else {
- kind = dme1737;
+
+ } else if (company == DME1737_COMPANY_SMSC &&
+ (verstep & DME1737_VERSTEP_MASK) == DME1737_VERSTEP) {
name = "dme1737";
+ } else {
+ return -ENODEV;
}
dev_info(dev, "Found a %s chip at 0x%02x (rev 0x%02x).\n",
- kind == sch5027 ? "SCH5027" : "DME1737", client->addr,
- verstep);
+ verstep == SCH5027_VERSTEP ? "SCH5027" : "DME1737",
+ client->addr, verstep);
strlcpy(info->type, name, I2C_NAME_SIZE);
return 0;
diff --git a/drivers/hwmon/ds1621.c b/drivers/hwmon/ds1621.c
index 53f88f5118167a8e3ebfb392ed199fb3f3c31175..2a4c6a05b14f594b5760f3d62c98b07d7dbc0bcc 100644
--- a/drivers/hwmon/ds1621.c
+++ b/drivers/hwmon/ds1621.c
@@ -237,20 +237,16 @@ static int ds1621_detect(struct i2c_client *client, int kind,
return -ENODEV;
/* Now, we do the remaining detection. It is lousy. */
- if (kind < 0) {
- /* The NVB bit should be low if no EEPROM write has been
- requested during the latest 10ms, which is highly
- improbable in our case. */
- conf = i2c_smbus_read_byte_data(client, DS1621_REG_CONF);
- if (conf < 0 || conf & DS1621_REG_CONFIG_NVB)
+ /* The NVB bit should be low if no EEPROM write has been requested
+ during the latest 10ms, which is highly improbable in our case. */
+ conf = i2c_smbus_read_byte_data(client, DS1621_REG_CONF);
+ if (conf < 0 || conf & DS1621_REG_CONFIG_NVB)
+ return -ENODEV;
+ /* The 7 lowest bits of a temperature should always be 0. */
+ for (i = 0; i < ARRAY_SIZE(DS1621_REG_TEMP); i++) {
+ temp = i2c_smbus_read_word_data(client, DS1621_REG_TEMP[i]);
+ if (temp < 0 || (temp & 0x7f00))
return -ENODEV;
- /* The 7 lowest bits of a temperature should always be 0. */
- for (i = 0; i < ARRAY_SIZE(DS1621_REG_TEMP); i++) {
- temp = i2c_smbus_read_word_data(client,
- DS1621_REG_TEMP[i]);
- if (temp < 0 || (temp & 0x7f00))
- return -ENODEV;
- }
}
strlcpy(info->type, "ds1621", I2C_NAME_SIZE);
diff --git a/drivers/hwmon/f71882fg.c b/drivers/hwmon/f71882fg.c
index 4146105f1a5779a5de55006444b9de99e90e8319..a95fa4256caa2af12f1b556a73837f4624d0fbcf 100644
--- a/drivers/hwmon/f71882fg.c
+++ b/drivers/hwmon/f71882fg.c
@@ -48,6 +48,7 @@
#define SIO_F71858_ID 0x0507 /* Chipset ID */
#define SIO_F71862_ID 0x0601 /* Chipset ID */
#define SIO_F71882_ID 0x0541 /* Chipset ID */
+#define SIO_F71889_ID 0x0723 /* Chipset ID */
#define SIO_F8000_ID 0x0581 /* Chipset ID */
#define REGION_LENGTH 8
@@ -95,12 +96,13 @@ static unsigned short force_id;
module_param(force_id, ushort, 0);
MODULE_PARM_DESC(force_id, "Override the detected device ID");
-enum chips { f71858fg, f71862fg, f71882fg, f8000 };
+enum chips { f71858fg, f71862fg, f71882fg, f71889fg, f8000 };
static const char *f71882fg_names[] = {
"f71858fg",
"f71862fg",
"f71882fg",
+ "f71889fg",
"f8000",
};
@@ -155,7 +157,7 @@ struct f71882fg_data {
u8 pwm_auto_point_hyst[2];
u8 pwm_auto_point_mapping[4];
u8 pwm_auto_point_pwm[4][5];
- u8 pwm_auto_point_temp[4][4];
+ s8 pwm_auto_point_temp[4][4];
};
/* Sysfs in */
@@ -258,7 +260,9 @@ static struct platform_driver f71882fg_driver = {
static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
-/* Temp and in attr for the f71858fg */
+/* Temp and in attr for the f71858fg, the f71858fg is special as it
+ has its temperature indexes start at 0 (the others start at 1) and
+ it only has 3 voltage inputs */
static struct sensor_device_attribute_2 f71858fg_in_temp_attr[] = {
SENSOR_ATTR_2(in0_input, S_IRUGO, show_in, NULL, 0, 0),
SENSOR_ATTR_2(in1_input, S_IRUGO, show_in, NULL, 0, 1),
@@ -302,8 +306,8 @@ static struct sensor_device_attribute_2 f71858fg_in_temp_attr[] = {
SENSOR_ATTR_2(temp3_fault, S_IRUGO, show_temp_fault, NULL, 0, 2),
};
-/* Temp and in attr common to both the f71862fg and f71882fg */
-static struct sensor_device_attribute_2 f718x2fg_in_temp_attr[] = {
+/* Temp and in attr common to the f71862fg, f71882fg and f71889fg */
+static struct sensor_device_attribute_2 fxxxx_in_temp_attr[] = {
SENSOR_ATTR_2(in0_input, S_IRUGO, show_in, NULL, 0, 0),
SENSOR_ATTR_2(in1_input, S_IRUGO, show_in, NULL, 0, 1),
SENSOR_ATTR_2(in2_input, S_IRUGO, show_in, NULL, 0, 2),
@@ -371,8 +375,8 @@ static struct sensor_device_attribute_2 f718x2fg_in_temp_attr[] = {
SENSOR_ATTR_2(temp3_fault, S_IRUGO, show_temp_fault, NULL, 0, 3),
};
-/* Temp and in attr found only on the f71882fg */
-static struct sensor_device_attribute_2 f71882fg_in_temp_attr[] = {
+/* For models with in1 alarm capability */
+static struct sensor_device_attribute_2 fxxxx_in1_alarm_attr[] = {
SENSOR_ATTR_2(in1_max, S_IRUGO|S_IWUSR, show_in_max, store_in_max,
0, 1),
SENSOR_ATTR_2(in1_beep, S_IRUGO|S_IWUSR, show_in_beep, store_in_beep,
@@ -383,6 +387,7 @@ static struct sensor_device_attribute_2 f71882fg_in_temp_attr[] = {
/* Temp and in attr for the f8000
Note on the f8000 temp_ovt (crit) is used as max, and temp_high (max)
is used as hysteresis value to clear alarms
+ Also like the f71858fg its temperature indexes start at 0
*/
static struct sensor_device_attribute_2 f8000_in_temp_attr[] = {
SENSOR_ATTR_2(in0_input, S_IRUGO, show_in, NULL, 0, 0),
@@ -413,61 +418,70 @@ static struct sensor_device_attribute_2 f8000_in_temp_attr[] = {
};
/* Fan / PWM attr common to all models */
-static struct sensor_device_attribute_2 fxxxx_fan_attr[] = {
+static struct sensor_device_attribute_2 fxxxx_fan_attr[4][6] = { {
SENSOR_ATTR_2(fan1_input, S_IRUGO, show_fan, NULL, 0, 0),
SENSOR_ATTR_2(fan1_full_speed, S_IRUGO|S_IWUSR,
show_fan_full_speed,
store_fan_full_speed, 0, 0),
SENSOR_ATTR_2(fan1_alarm, S_IRUGO, show_fan_alarm, NULL, 0, 0),
- SENSOR_ATTR_2(fan2_input, S_IRUGO, show_fan, NULL, 0, 1),
- SENSOR_ATTR_2(fan2_full_speed, S_IRUGO|S_IWUSR,
- show_fan_full_speed,
- store_fan_full_speed, 0, 1),
- SENSOR_ATTR_2(fan2_alarm, S_IRUGO, show_fan_alarm, NULL, 0, 1),
- SENSOR_ATTR_2(fan3_input, S_IRUGO, show_fan, NULL, 0, 2),
- SENSOR_ATTR_2(fan3_full_speed, S_IRUGO|S_IWUSR,
- show_fan_full_speed,
- store_fan_full_speed, 0, 2),
- SENSOR_ATTR_2(fan3_alarm, S_IRUGO, show_fan_alarm, NULL, 0, 2),
-
SENSOR_ATTR_2(pwm1, S_IRUGO|S_IWUSR, show_pwm, store_pwm, 0, 0),
SENSOR_ATTR_2(pwm1_enable, S_IRUGO|S_IWUSR, show_pwm_enable,
store_pwm_enable, 0, 0),
SENSOR_ATTR_2(pwm1_interpolate, S_IRUGO|S_IWUSR,
show_pwm_interpolate, store_pwm_interpolate, 0, 0),
- SENSOR_ATTR_2(pwm1_auto_channels_temp, S_IRUGO|S_IWUSR,
- show_pwm_auto_point_channel,
- store_pwm_auto_point_channel, 0, 0),
-
+}, {
+ SENSOR_ATTR_2(fan2_input, S_IRUGO, show_fan, NULL, 0, 1),
+ SENSOR_ATTR_2(fan2_full_speed, S_IRUGO|S_IWUSR,
+ show_fan_full_speed,
+ store_fan_full_speed, 0, 1),
+ SENSOR_ATTR_2(fan2_alarm, S_IRUGO, show_fan_alarm, NULL, 0, 1),
SENSOR_ATTR_2(pwm2, S_IRUGO|S_IWUSR, show_pwm, store_pwm, 0, 1),
SENSOR_ATTR_2(pwm2_enable, S_IRUGO|S_IWUSR, show_pwm_enable,
store_pwm_enable, 0, 1),
SENSOR_ATTR_2(pwm2_interpolate, S_IRUGO|S_IWUSR,
show_pwm_interpolate, store_pwm_interpolate, 0, 1),
- SENSOR_ATTR_2(pwm2_auto_channels_temp, S_IRUGO|S_IWUSR,
- show_pwm_auto_point_channel,
- store_pwm_auto_point_channel, 0, 1),
-
+}, {
+ SENSOR_ATTR_2(fan3_input, S_IRUGO, show_fan, NULL, 0, 2),
+ SENSOR_ATTR_2(fan3_full_speed, S_IRUGO|S_IWUSR,
+ show_fan_full_speed,
+ store_fan_full_speed, 0, 2),
+ SENSOR_ATTR_2(fan3_alarm, S_IRUGO, show_fan_alarm, NULL, 0, 2),
SENSOR_ATTR_2(pwm3, S_IRUGO|S_IWUSR, show_pwm, store_pwm, 0, 2),
SENSOR_ATTR_2(pwm3_enable, S_IRUGO|S_IWUSR, show_pwm_enable,
store_pwm_enable, 0, 2),
SENSOR_ATTR_2(pwm3_interpolate, S_IRUGO|S_IWUSR,
show_pwm_interpolate, store_pwm_interpolate, 0, 2),
- SENSOR_ATTR_2(pwm3_auto_channels_temp, S_IRUGO|S_IWUSR,
- show_pwm_auto_point_channel,
- store_pwm_auto_point_channel, 0, 2),
-};
+}, {
+ SENSOR_ATTR_2(fan4_input, S_IRUGO, show_fan, NULL, 0, 3),
+ SENSOR_ATTR_2(fan4_full_speed, S_IRUGO|S_IWUSR,
+ show_fan_full_speed,
+ store_fan_full_speed, 0, 3),
+ SENSOR_ATTR_2(fan4_alarm, S_IRUGO, show_fan_alarm, NULL, 0, 3),
+ SENSOR_ATTR_2(pwm4, S_IRUGO|S_IWUSR, show_pwm, store_pwm, 0, 3),
+ SENSOR_ATTR_2(pwm4_enable, S_IRUGO|S_IWUSR, show_pwm_enable,
+ store_pwm_enable, 0, 3),
+ SENSOR_ATTR_2(pwm4_interpolate, S_IRUGO|S_IWUSR,
+ show_pwm_interpolate, store_pwm_interpolate, 0, 3),
+} };
-/* Fan / PWM attr for the f71862fg, less pwms and less zones per pwm than the
- f71882fg */
-static struct sensor_device_attribute_2 f71862fg_fan_attr[] = {
+/* Attr for models which can beep on Fan alarm */
+static struct sensor_device_attribute_2 fxxxx_fan_beep_attr[] = {
SENSOR_ATTR_2(fan1_beep, S_IRUGO|S_IWUSR, show_fan_beep,
store_fan_beep, 0, 0),
SENSOR_ATTR_2(fan2_beep, S_IRUGO|S_IWUSR, show_fan_beep,
store_fan_beep, 0, 1),
SENSOR_ATTR_2(fan3_beep, S_IRUGO|S_IWUSR, show_fan_beep,
store_fan_beep, 0, 2),
+ SENSOR_ATTR_2(fan4_beep, S_IRUGO|S_IWUSR, show_fan_beep,
+ store_fan_beep, 0, 3),
+};
+/* PWM attr for the f71862fg, fewer pwms and fewer zones per pwm than the
+ f71858fg / f71882fg / f71889fg */
+static struct sensor_device_attribute_2 f71862fg_auto_pwm_attr[] = {
+ SENSOR_ATTR_2(pwm1_auto_channels_temp, S_IRUGO|S_IWUSR,
+ show_pwm_auto_point_channel,
+ store_pwm_auto_point_channel, 0, 0),
SENSOR_ATTR_2(pwm1_auto_point1_pwm, S_IRUGO|S_IWUSR,
show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
1, 0),
@@ -487,6 +501,9 @@ static struct sensor_device_attribute_2 f71862fg_fan_attr[] = {
SENSOR_ATTR_2(pwm1_auto_point2_temp_hyst, S_IRUGO,
show_pwm_auto_point_temp_hyst, NULL, 3, 0),
+ SENSOR_ATTR_2(pwm2_auto_channels_temp, S_IRUGO|S_IWUSR,
+ show_pwm_auto_point_channel,
+ store_pwm_auto_point_channel, 0, 1),
SENSOR_ATTR_2(pwm2_auto_point1_pwm, S_IRUGO|S_IWUSR,
show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
1, 1),
@@ -506,6 +523,9 @@ static struct sensor_device_attribute_2 f71862fg_fan_attr[] = {
SENSOR_ATTR_2(pwm2_auto_point2_temp_hyst, S_IRUGO,
show_pwm_auto_point_temp_hyst, NULL, 3, 1),
+ SENSOR_ATTR_2(pwm3_auto_channels_temp, S_IRUGO|S_IWUSR,
+ show_pwm_auto_point_channel,
+ store_pwm_auto_point_channel, 0, 2),
SENSOR_ATTR_2(pwm3_auto_point1_pwm, S_IRUGO|S_IWUSR,
show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
1, 2),
@@ -526,8 +546,11 @@ static struct sensor_device_attribute_2 f71862fg_fan_attr[] = {
show_pwm_auto_point_temp_hyst, NULL, 3, 2),
};
-/* Fan / PWM attr common to both the f71882fg and f71858fg */
-static struct sensor_device_attribute_2 f71882fg_f71858fg_fan_attr[] = {
+/* PWM attr common to the f71858fg, f71882fg and f71889fg */
+static struct sensor_device_attribute_2 fxxxx_auto_pwm_attr[4][14] = { {
+ SENSOR_ATTR_2(pwm1_auto_channels_temp, S_IRUGO|S_IWUSR,
+ show_pwm_auto_point_channel,
+ store_pwm_auto_point_channel, 0, 0),
SENSOR_ATTR_2(pwm1_auto_point1_pwm, S_IRUGO|S_IWUSR,
show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
0, 0),
@@ -565,7 +588,10 @@ static struct sensor_device_attribute_2 f71882fg_f71858fg_fan_attr[] = {
show_pwm_auto_point_temp_hyst, NULL, 2, 0),
SENSOR_ATTR_2(pwm1_auto_point4_temp_hyst, S_IRUGO,
show_pwm_auto_point_temp_hyst, NULL, 3, 0),
-
+}, {
+ SENSOR_ATTR_2(pwm2_auto_channels_temp, S_IRUGO|S_IWUSR,
+ show_pwm_auto_point_channel,
+ store_pwm_auto_point_channel, 0, 1),
SENSOR_ATTR_2(pwm2_auto_point1_pwm, S_IRUGO|S_IWUSR,
show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
0, 1),
@@ -603,7 +629,10 @@ static struct sensor_device_attribute_2 f71882fg_f71858fg_fan_attr[] = {
show_pwm_auto_point_temp_hyst, NULL, 2, 1),
SENSOR_ATTR_2(pwm2_auto_point4_temp_hyst, S_IRUGO,
show_pwm_auto_point_temp_hyst, NULL, 3, 1),
-
+}, {
+ SENSOR_ATTR_2(pwm3_auto_channels_temp, S_IRUGO|S_IWUSR,
+ show_pwm_auto_point_channel,
+ store_pwm_auto_point_channel, 0, 2),
SENSOR_ATTR_2(pwm3_auto_point1_pwm, S_IRUGO|S_IWUSR,
show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
0, 2),
@@ -641,30 +670,7 @@ static struct sensor_device_attribute_2 f71882fg_f71858fg_fan_attr[] = {
show_pwm_auto_point_temp_hyst, NULL, 2, 2),
SENSOR_ATTR_2(pwm3_auto_point4_temp_hyst, S_IRUGO,
show_pwm_auto_point_temp_hyst, NULL, 3, 2),
-};
-
-/* Fan / PWM attr found on the f71882fg but not on the f71858fg */
-static struct sensor_device_attribute_2 f71882fg_fan_attr[] = {
- SENSOR_ATTR_2(fan1_beep, S_IRUGO|S_IWUSR, show_fan_beep,
- store_fan_beep, 0, 0),
- SENSOR_ATTR_2(fan2_beep, S_IRUGO|S_IWUSR, show_fan_beep,
- store_fan_beep, 0, 1),
- SENSOR_ATTR_2(fan3_beep, S_IRUGO|S_IWUSR, show_fan_beep,
- store_fan_beep, 0, 2),
-
- SENSOR_ATTR_2(fan4_input, S_IRUGO, show_fan, NULL, 0, 3),
- SENSOR_ATTR_2(fan4_full_speed, S_IRUGO|S_IWUSR,
- show_fan_full_speed,
- store_fan_full_speed, 0, 3),
- SENSOR_ATTR_2(fan4_beep, S_IRUGO|S_IWUSR, show_fan_beep,
- store_fan_beep, 0, 3),
- SENSOR_ATTR_2(fan4_alarm, S_IRUGO, show_fan_alarm, NULL, 0, 3),
-
- SENSOR_ATTR_2(pwm4, S_IRUGO|S_IWUSR, show_pwm, store_pwm, 0, 3),
- SENSOR_ATTR_2(pwm4_enable, S_IRUGO|S_IWUSR, show_pwm_enable,
- store_pwm_enable, 0, 3),
- SENSOR_ATTR_2(pwm4_interpolate, S_IRUGO|S_IWUSR,
- show_pwm_interpolate, store_pwm_interpolate, 0, 3),
+}, {
SENSOR_ATTR_2(pwm4_auto_channels_temp, S_IRUGO|S_IWUSR,
show_pwm_auto_point_channel,
store_pwm_auto_point_channel, 0, 3),
@@ -705,14 +711,20 @@ static struct sensor_device_attribute_2 f71882fg_fan_attr[] = {
show_pwm_auto_point_temp_hyst, NULL, 2, 3),
SENSOR_ATTR_2(pwm4_auto_point4_temp_hyst, S_IRUGO,
show_pwm_auto_point_temp_hyst, NULL, 3, 3),
-};
+} };
-/* Fan / PWM attr for the f8000, zones mapped to temp instead of to pwm!
- Also the register block at offset A0 maps to TEMP1 (so our temp2, as the
- F8000 starts counting temps at 0), B0 maps the TEMP2 and C0 maps to TEMP0 */
+/* Fan attr specific to the f8000 (4th fan input can only measure speed) */
static struct sensor_device_attribute_2 f8000_fan_attr[] = {
SENSOR_ATTR_2(fan4_input, S_IRUGO, show_fan, NULL, 0, 3),
+};
+/* PWM attr for the f8000, zones mapped to temp instead of to pwm!
+ Also the register block at offset A0 maps to TEMP1 (so our temp2, as the
+ F8000 starts counting temps at 0), B0 maps the TEMP2 and C0 maps to TEMP0 */
+static struct sensor_device_attribute_2 f8000_auto_pwm_attr[] = {
+ SENSOR_ATTR_2(pwm1_auto_channels_temp, S_IRUGO|S_IWUSR,
+ show_pwm_auto_point_channel,
+ store_pwm_auto_point_channel, 0, 0),
SENSOR_ATTR_2(temp1_auto_point1_pwm, S_IRUGO|S_IWUSR,
show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
0, 2),
@@ -751,6 +763,9 @@ static struct sensor_device_attribute_2 f8000_fan_attr[] = {
SENSOR_ATTR_2(temp1_auto_point4_temp_hyst, S_IRUGO,
show_pwm_auto_point_temp_hyst, NULL, 3, 2),
+ SENSOR_ATTR_2(pwm2_auto_channels_temp, S_IRUGO|S_IWUSR,
+ show_pwm_auto_point_channel,
+ store_pwm_auto_point_channel, 0, 1),
SENSOR_ATTR_2(temp2_auto_point1_pwm, S_IRUGO|S_IWUSR,
show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
0, 0),
@@ -789,6 +804,9 @@ static struct sensor_device_attribute_2 f8000_fan_attr[] = {
SENSOR_ATTR_2(temp2_auto_point4_temp_hyst, S_IRUGO,
show_pwm_auto_point_temp_hyst, NULL, 3, 0),
+ SENSOR_ATTR_2(pwm3_auto_channels_temp, S_IRUGO|S_IWUSR,
+ show_pwm_auto_point_channel,
+ store_pwm_auto_point_channel, 0, 2),
SENSOR_ATTR_2(temp3_auto_point1_pwm, S_IRUGO|S_IWUSR,
show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
0, 1),
@@ -929,7 +947,7 @@ static struct f71882fg_data *f71882fg_update_device(struct device *dev)
/* Update once every 60 seconds */
if ( time_after(jiffies, data->last_limits + 60 * HZ ) ||
!data->valid) {
- if (data->type == f71882fg) {
+ if (data->type == f71882fg || data->type == f71889fg) {
data->in1_max =
f71882fg_read8(data, F71882FG_REG_IN1_HIGH);
data->in_beep =
@@ -951,7 +969,8 @@ static struct f71882fg_data *f71882fg_update_device(struct device *dev)
F71882FG_REG_TEMP_HYST(1));
}
- if (data->type == f71862fg || data->type == f71882fg) {
+ if (data->type == f71862fg || data->type == f71882fg ||
+ data->type == f71889fg) {
data->fan_beep = f71882fg_read8(data,
F71882FG_REG_FAN_BEEP);
data->temp_beep = f71882fg_read8(data,
@@ -961,15 +980,33 @@ static struct f71882fg_data *f71882fg_update_device(struct device *dev)
data->temp_type[2] = (reg & 0x04) ? 2 : 4;
data->temp_type[3] = (reg & 0x08) ? 2 : 4;
}
- reg2 = f71882fg_read8(data, F71882FG_REG_PECI);
- if ((reg2 & 0x03) == 0x01)
- data->temp_type[1] = 6 /* PECI */;
- else if ((reg2 & 0x03) == 0x02)
- data->temp_type[1] = 5 /* AMDSI */;
- else if (data->type == f71862fg || data->type == f71882fg)
- data->temp_type[1] = (reg & 0x02) ? 2 : 4;
- else
- data->temp_type[1] = 2; /* Only supports BJT */
+ /* Determine temp index 1 sensor type */
+ if (data->type == f71889fg) {
+ reg2 = f71882fg_read8(data, F71882FG_REG_START);
+ switch ((reg2 & 0x60) >> 5) {
+ case 0x00: /* BJT / Thermistor */
+ data->temp_type[1] = (reg & 0x02) ? 2 : 4;
+ break;
+ case 0x01: /* AMDSI */
+ data->temp_type[1] = 5;
+ break;
+ case 0x02: /* PECI */
+ case 0x03: /* Ibex Peak ?? Report as PECI for now */
+ data->temp_type[1] = 6;
+ break;
+ }
+ } else {
+ reg2 = f71882fg_read8(data, F71882FG_REG_PECI);
+ if ((reg2 & 0x03) == 0x01)
+ data->temp_type[1] = 6; /* PECI */
+ else if ((reg2 & 0x03) == 0x02)
+ data->temp_type[1] = 5; /* AMDSI */
+ else if (data->type == f71862fg ||
+ data->type == f71882fg)
+ data->temp_type[1] = (reg & 0x02) ? 2 : 4;
+ else /* f71858fg and f8000 only support BJT */
+ data->temp_type[1] = 2;
+ }
data->pwm_enable = f71882fg_read8(data,
F71882FG_REG_PWM_ENABLE);
@@ -1046,7 +1083,7 @@ static struct f71882fg_data *f71882fg_update_device(struct device *dev)
if (data->type == f8000)
data->fan[3] = f71882fg_read16(data,
F71882FG_REG_FAN(3));
- if (data->type == f71882fg)
+ if (data->type == f71882fg || data->type == f71889fg)
data->in_status = f71882fg_read8(data,
F71882FG_REG_IN_STATUS);
for (nr = 0; nr < nr_ins; nr++)
@@ -1764,7 +1801,11 @@ static ssize_t store_pwm_auto_point_temp(struct device *dev,
int pwm = to_sensor_dev_attr_2(devattr)->index;
int point = to_sensor_dev_attr_2(devattr)->nr;
long val = simple_strtol(buf, NULL, 10) / 1000;
- val = SENSORS_LIMIT(val, 0, 255);
+
+ if (data->type == f71889fg)
+ val = SENSORS_LIMIT(val, -128, 127);
+ else
+ val = SENSORS_LIMIT(val, 0, 127);
mutex_lock(&data->update_lock);
f71882fg_write8(data, F71882FG_REG_POINT_TEMP(pwm, point), val);
@@ -1794,6 +1835,15 @@ static int __devinit f71882fg_create_sysfs_files(struct platform_device *pdev,
return 0;
}
+static void f71882fg_remove_sysfs_files(struct platform_device *pdev,
+ struct sensor_device_attribute_2 *attr, int count)
+{
+ int i;
+
+ for (i = 0; i < count; i++)
+ device_remove_file(&pdev->dev, &attr[i].dev_attr);
+}
+
static int __devinit f71882fg_probe(struct platform_device *pdev)
{
struct f71882fg_data *data;
@@ -1846,16 +1896,17 @@ static int __devinit f71882fg_probe(struct platform_device *pdev)
ARRAY_SIZE(f71858fg_in_temp_attr));
break;
case f71882fg:
+ case f71889fg:
err = f71882fg_create_sysfs_files(pdev,
- f71882fg_in_temp_attr,
- ARRAY_SIZE(f71882fg_in_temp_attr));
+ fxxxx_in1_alarm_attr,
+ ARRAY_SIZE(fxxxx_in1_alarm_attr));
if (err)
goto exit_unregister_sysfs;
/* fall through! */
case f71862fg:
err = f71882fg_create_sysfs_files(pdev,
- f718x2fg_in_temp_attr,
- ARRAY_SIZE(f718x2fg_in_temp_attr));
+ fxxxx_in_temp_attr,
+ ARRAY_SIZE(fxxxx_in_temp_attr));
break;
case f8000:
err = f71882fg_create_sysfs_files(pdev,
@@ -1883,6 +1934,7 @@ static int __devinit f71882fg_probe(struct platform_device *pdev)
err = (data->pwm_enable & 0x15) != 0x15;
break;
case f71882fg:
+ case f71889fg:
err = 0;
break;
case f8000:
@@ -1897,34 +1949,55 @@ static int __devinit f71882fg_probe(struct platform_device *pdev)
goto exit_unregister_sysfs;
}
- err = f71882fg_create_sysfs_files(pdev, fxxxx_fan_attr,
- ARRAY_SIZE(fxxxx_fan_attr));
+ err = f71882fg_create_sysfs_files(pdev, &fxxxx_fan_attr[0][0],
+ ARRAY_SIZE(fxxxx_fan_attr[0]) * nr_fans);
if (err)
goto exit_unregister_sysfs;
- switch (data->type) {
- case f71862fg:
- err = f71882fg_create_sysfs_files(pdev,
- f71862fg_fan_attr,
- ARRAY_SIZE(f71862fg_fan_attr));
- break;
- case f71882fg:
+ if (data->type == f71862fg || data->type == f71882fg ||
+ data->type == f71889fg) {
err = f71882fg_create_sysfs_files(pdev,
- f71882fg_fan_attr,
- ARRAY_SIZE(f71882fg_fan_attr));
+ fxxxx_fan_beep_attr, nr_fans);
if (err)
goto exit_unregister_sysfs;
- /* fall through! */
- case f71858fg:
+ }
+
+ switch (data->type) {
+ case f71862fg:
err = f71882fg_create_sysfs_files(pdev,
- f71882fg_f71858fg_fan_attr,
- ARRAY_SIZE(f71882fg_f71858fg_fan_attr));
+ f71862fg_auto_pwm_attr,
+ ARRAY_SIZE(f71862fg_auto_pwm_attr));
break;
case f8000:
err = f71882fg_create_sysfs_files(pdev,
f8000_fan_attr,
ARRAY_SIZE(f8000_fan_attr));
+ if (err)
+ goto exit_unregister_sysfs;
+ err = f71882fg_create_sysfs_files(pdev,
+ f8000_auto_pwm_attr,
+ ARRAY_SIZE(f8000_auto_pwm_attr));
break;
+ case f71889fg:
+ for (i = 0; i < nr_fans; i++) {
+ data->pwm_auto_point_mapping[i] =
+ f71882fg_read8(data,
+ F71882FG_REG_POINT_MAPPING(i));
+ if (data->pwm_auto_point_mapping[i] & 0x80)
+ break;
+ }
+ if (i != nr_fans) {
+ dev_warn(&pdev->dev,
+ "Auto pwm controlled by raw digital "
+ "data, disabling pwm auto_point "
+ "sysfs attributes\n");
+ break;
+ }
+ /* fall through */
+ default: /* f71858fg / f71882fg */
+ err = f71882fg_create_sysfs_files(pdev,
+ &fxxxx_auto_pwm_attr[0][0],
+ ARRAY_SIZE(fxxxx_auto_pwm_attr[0]) * nr_fans);
}
if (err)
goto exit_unregister_sysfs;
@@ -1954,33 +2027,76 @@ exit_free:
static int f71882fg_remove(struct platform_device *pdev)
{
- int i;
struct f71882fg_data *data = platform_get_drvdata(pdev);
+ int nr_fans = (data->type == f71882fg) ? 4 : 3;
+ u8 start_reg = f71882fg_read8(data, F71882FG_REG_START);
platform_set_drvdata(pdev, NULL);
if (data->hwmon_dev)
hwmon_device_unregister(data->hwmon_dev);
- /* Note we are not looping over all attr arrays we have as the ones
- below are supersets of the ones skipped. */
device_remove_file(&pdev->dev, &dev_attr_name);
- for (i = 0; i < ARRAY_SIZE(f718x2fg_in_temp_attr); i++)
- device_remove_file(&pdev->dev,
- &f718x2fg_in_temp_attr[i].dev_attr);
-
- for (i = 0; i < ARRAY_SIZE(f71882fg_in_temp_attr); i++)
- device_remove_file(&pdev->dev,
- &f71882fg_in_temp_attr[i].dev_attr);
+ if (start_reg & 0x01) {
+ switch (data->type) {
+ case f71858fg:
+ if (data->temp_config & 0x10)
+ f71882fg_remove_sysfs_files(pdev,
+ f8000_in_temp_attr,
+ ARRAY_SIZE(f8000_in_temp_attr));
+ else
+ f71882fg_remove_sysfs_files(pdev,
+ f71858fg_in_temp_attr,
+ ARRAY_SIZE(f71858fg_in_temp_attr));
+ break;
+ case f71882fg:
+ case f71889fg:
+ f71882fg_remove_sysfs_files(pdev,
+ fxxxx_in1_alarm_attr,
+ ARRAY_SIZE(fxxxx_in1_alarm_attr));
+ /* fall through! */
+ case f71862fg:
+ f71882fg_remove_sysfs_files(pdev,
+ fxxxx_in_temp_attr,
+ ARRAY_SIZE(fxxxx_in_temp_attr));
+ break;
+ case f8000:
+ f71882fg_remove_sysfs_files(pdev,
+ f8000_in_temp_attr,
+ ARRAY_SIZE(f8000_in_temp_attr));
+ break;
+ }
+ }
- for (i = 0; i < ARRAY_SIZE(fxxxx_fan_attr); i++)
- device_remove_file(&pdev->dev, &fxxxx_fan_attr[i].dev_attr);
+ if (start_reg & 0x02) {
+ f71882fg_remove_sysfs_files(pdev, &fxxxx_fan_attr[0][0],
+ ARRAY_SIZE(fxxxx_fan_attr[0]) * nr_fans);
- for (i = 0; i < ARRAY_SIZE(f71882fg_fan_attr); i++)
- device_remove_file(&pdev->dev, &f71882fg_fan_attr[i].dev_attr);
+ if (data->type == f71862fg || data->type == f71882fg ||
+ data->type == f71889fg)
+ f71882fg_remove_sysfs_files(pdev,
+ fxxxx_fan_beep_attr, nr_fans);
- for (i = 0; i < ARRAY_SIZE(f8000_fan_attr); i++)
- device_remove_file(&pdev->dev, &f8000_fan_attr[i].dev_attr);
+ switch (data->type) {
+ case f71862fg:
+ f71882fg_remove_sysfs_files(pdev,
+ f71862fg_auto_pwm_attr,
+ ARRAY_SIZE(f71862fg_auto_pwm_attr));
+ break;
+ case f8000:
+ f71882fg_remove_sysfs_files(pdev,
+ f8000_fan_attr,
+ ARRAY_SIZE(f8000_fan_attr));
+ f71882fg_remove_sysfs_files(pdev,
+ f8000_auto_pwm_attr,
+ ARRAY_SIZE(f8000_auto_pwm_attr));
+ break;
+ default: /* f71858fg / f71882fg / f71889fg */
+ f71882fg_remove_sysfs_files(pdev,
+ &fxxxx_auto_pwm_attr[0][0],
+ ARRAY_SIZE(fxxxx_auto_pwm_attr[0]) * nr_fans);
+ }
+ }
kfree(data);
@@ -2012,11 +2128,15 @@ static int __init f71882fg_find(int sioaddr, unsigned short *address,
case SIO_F71882_ID:
sio_data->type = f71882fg;
break;
+ case SIO_F71889_ID:
+ sio_data->type = f71889fg;
+ break;
case SIO_F8000_ID:
sio_data->type = f8000;
break;
default:
- printk(KERN_INFO DRVNAME ": Unsupported Fintek device\n");
+ printk(KERN_INFO DRVNAME ": Unsupported Fintek device: %04x\n",
+ (unsigned int)devid);
goto exit;
}
diff --git a/drivers/hwmon/f75375s.c b/drivers/hwmon/f75375s.c
index e2107e533ede3371aeff3e4213bac1e06c624dfb..40dfbcd3f3f2f704240a9ab957355208dfb39308 100644
--- a/drivers/hwmon/f75375s.c
+++ b/drivers/hwmon/f75375s.c
@@ -681,30 +681,20 @@ static int f75375_detect(struct i2c_client *client, int kind,
struct i2c_board_info *info)
{
struct i2c_adapter *adapter = client->adapter;
- u8 version = 0;
- const char *name = "";
-
- if (kind < 0) {
- u16 vendid = f75375_read16(client, F75375_REG_VENDOR);
- u16 chipid = f75375_read16(client, F75375_CHIP_ID);
- version = f75375_read8(client, F75375_REG_VERSION);
- if (chipid == 0x0306 && vendid == 0x1934) {
- kind = f75375;
- } else if (chipid == 0x0204 && vendid == 0x1934) {
- kind = f75373;
- } else {
- dev_err(&adapter->dev,
- "failed,%02X,%02X,%02X\n",
- chipid, version, vendid);
- return -ENODEV;
- }
- }
+ u16 vendid, chipid;
+ u8 version;
+ const char *name;
- if (kind == f75375) {
+ vendid = f75375_read16(client, F75375_REG_VENDOR);
+ chipid = f75375_read16(client, F75375_CHIP_ID);
+ if (chipid == 0x0306 && vendid == 0x1934)
name = "f75375";
- } else if (kind == f75373) {
+ else if (chipid == 0x0204 && vendid == 0x1934)
name = "f75373";
- }
+ else
+ return -ENODEV;
+
+ version = f75375_read8(client, F75375_REG_VERSION);
dev_info(&adapter->dev, "found %s version: %02X\n", name, version);
strlcpy(info->type, name, I2C_NAME_SIZE);
diff --git a/drivers/hwmon/fschmd.c b/drivers/hwmon/fschmd.c
index da1b1f9488afc335c60b1833ee3fb7d89d3b832d..281829cd1533824b62b12d66d7c7e78c7c5b7623 100644
--- a/drivers/hwmon/fschmd.c
+++ b/drivers/hwmon/fschmd.c
@@ -1000,43 +1000,38 @@ static void fschmd_dmi_decode(const struct dmi_header *header, void *dummy)
}
}
-static int fschmd_detect(struct i2c_client *client, int kind,
+static int fschmd_detect(struct i2c_client *client, int _kind,
struct i2c_board_info *info)
{
+ enum chips kind;
struct i2c_adapter *adapter = client->adapter;
+ char id[4];
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
return -ENODEV;
/* Detect & Identify the chip */
- if (kind <= 0) {
- char id[4];
-
- id[0] = i2c_smbus_read_byte_data(client,
- FSCHMD_REG_IDENT_0);
- id[1] = i2c_smbus_read_byte_data(client,
- FSCHMD_REG_IDENT_1);
- id[2] = i2c_smbus_read_byte_data(client,
- FSCHMD_REG_IDENT_2);
- id[3] = '\0';
-
- if (!strcmp(id, "PEG"))
- kind = fscpos;
- else if (!strcmp(id, "HER"))
- kind = fscher;
- else if (!strcmp(id, "SCY"))
- kind = fscscy;
- else if (!strcmp(id, "HRC"))
- kind = fschrc;
- else if (!strcmp(id, "HMD"))
- kind = fschmd;
- else if (!strcmp(id, "HDS"))
- kind = fschds;
- else if (!strcmp(id, "SYL"))
- kind = fscsyl;
- else
- return -ENODEV;
- }
+ id[0] = i2c_smbus_read_byte_data(client, FSCHMD_REG_IDENT_0);
+ id[1] = i2c_smbus_read_byte_data(client, FSCHMD_REG_IDENT_1);
+ id[2] = i2c_smbus_read_byte_data(client, FSCHMD_REG_IDENT_2);
+ id[3] = '\0';
+
+ if (!strcmp(id, "PEG"))
+ kind = fscpos;
+ else if (!strcmp(id, "HER"))
+ kind = fscher;
+ else if (!strcmp(id, "SCY"))
+ kind = fscscy;
+ else if (!strcmp(id, "HRC"))
+ kind = fschrc;
+ else if (!strcmp(id, "HMD"))
+ kind = fschmd;
+ else if (!strcmp(id, "HDS"))
+ kind = fschds;
+ else if (!strcmp(id, "SYL"))
+ kind = fscsyl;
+ else
+ return -ENODEV;
strlcpy(info->type, fschmd_id[kind - 1].name, I2C_NAME_SIZE);
diff --git a/drivers/hwmon/gl518sm.c b/drivers/hwmon/gl518sm.c
index 7820df45d77a7dd56312b890b2756c6bb2c8560c..1d69458aa0b641cab7da8c51f9b7f1825dd0a6a8 100644
--- a/drivers/hwmon/gl518sm.c
+++ b/drivers/hwmon/gl518sm.c
@@ -488,36 +488,21 @@ static int gl518_detect(struct i2c_client *client, int kind,
struct i2c_board_info *info)
{
struct i2c_adapter *adapter = client->adapter;
- int i;
+ int rev;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
I2C_FUNC_SMBUS_WORD_DATA))
return -ENODEV;
/* Now, we do the remaining detection. */
-
- if (kind < 0) {
- if ((gl518_read_value(client, GL518_REG_CHIP_ID) != 0x80)
- || (gl518_read_value(client, GL518_REG_CONF) & 0x80))
- return -ENODEV;
- }
+ if ((gl518_read_value(client, GL518_REG_CHIP_ID) != 0x80)
+ || (gl518_read_value(client, GL518_REG_CONF) & 0x80))
+ return -ENODEV;
/* Determine the chip type. */
- if (kind <= 0) {
- i = gl518_read_value(client, GL518_REG_REVISION);
- if (i == 0x00) {
- kind = gl518sm_r00;
- } else if (i == 0x80) {
- kind = gl518sm_r80;
- } else {
- if (kind <= 0)
- dev_info(&adapter->dev,
- "Ignoring 'force' parameter for unknown "
- "chip at adapter %d, address 0x%02x\n",
- i2c_adapter_id(adapter), client->addr);
- return -ENODEV;
- }
- }
+ rev = gl518_read_value(client, GL518_REG_REVISION);
+ if (rev != 0x00 && rev != 0x80)
+ return -ENODEV;
strlcpy(info->type, "gl518sm", I2C_NAME_SIZE);
diff --git a/drivers/hwmon/gl520sm.c b/drivers/hwmon/gl520sm.c
index 19616f2242b02ce9b0b51445854d47a2c815b542..92b5720ceaffd57bdece90ce14bcfd37dfdf7888 100644
--- a/drivers/hwmon/gl520sm.c
+++ b/drivers/hwmon/gl520sm.c
@@ -691,13 +691,11 @@ static int gl520_detect(struct i2c_client *client, int kind,
return -ENODEV;
/* Determine the chip type. */
- if (kind < 0) {
- if ((gl520_read_value(client, GL520_REG_CHIP_ID) != 0x20) ||
- ((gl520_read_value(client, GL520_REG_REVISION) & 0x7f) != 0x00) ||
- ((gl520_read_value(client, GL520_REG_CONF) & 0x80) != 0x00)) {
- dev_dbg(&client->dev, "Unknown chip type, skipping\n");
- return -ENODEV;
- }
+ if ((gl520_read_value(client, GL520_REG_CHIP_ID) != 0x20) ||
+ ((gl520_read_value(client, GL520_REG_REVISION) & 0x7f) != 0x00) ||
+ ((gl520_read_value(client, GL520_REG_CONF) & 0x80) != 0x00)) {
+ dev_dbg(&client->dev, "Unknown chip type, skipping\n");
+ return -ENODEV;
}
strlcpy(info->type, "gl520sm", I2C_NAME_SIZE);
diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c
index a3749cb0f181ec623a4d628ea615c66a154a6c5e..0ffe84d190bbfabae0b7343ba6f3d39c078eabee 100644
--- a/drivers/hwmon/it87.c
+++ b/drivers/hwmon/it87.c
@@ -124,6 +124,8 @@ superio_exit(void)
#define IT87_BASE_REG 0x60
/* Logical device 7 registers (IT8712F and later) */
+#define IT87_SIO_GPIO3_REG 0x27
+#define IT87_SIO_GPIO5_REG 0x29
#define IT87_SIO_PINX2_REG 0x2c /* Pin selection */
#define IT87_SIO_VID_REG 0xfc /* VID value */
@@ -244,7 +246,9 @@ struct it87_sio_data {
/* Values read from Super-I/O config space */
u8 revision;
u8 vid_value;
- /* Values set based on DMI strings */
+ /* Features skipped based on config or DMI */
+ u8 skip_vid;
+ u8 skip_fan;
u8 skip_pwm;
};
@@ -1028,11 +1032,35 @@ static int __init it87_find(unsigned short *address,
chip_type, *address, sio_data->revision);
/* Read GPIO config and VID value from LDN 7 (GPIO) */
- if (sio_data->type != it87) {
+ if (sio_data->type == it87) {
+ /* The IT8705F doesn't have VID pins at all */
+ sio_data->skip_vid = 1;
+ } else {
int reg;
superio_select(GPIO);
- if (sio_data->type == it8718 || sio_data->type == it8720)
+ /* We need at least 4 VID pins */
+ reg = superio_inb(IT87_SIO_GPIO3_REG);
+ if (reg & 0x0f) {
+ pr_info("it87: VID is disabled (pins used for GPIO)\n");
+ sio_data->skip_vid = 1;
+ }
+
+ /* Check if fan3 is there or not */
+ if (reg & (1 << 6))
+ sio_data->skip_pwm |= (1 << 2);
+ if (reg & (1 << 7))
+ sio_data->skip_fan |= (1 << 2);
+
+ /* Check if fan2 is there or not */
+ reg = superio_inb(IT87_SIO_GPIO5_REG);
+ if (reg & (1 << 1))
+ sio_data->skip_pwm |= (1 << 1);
+ if (reg & (1 << 2))
+ sio_data->skip_fan |= (1 << 1);
+
+ if ((sio_data->type == it8718 || sio_data->type == it8720)
+ && !(sio_data->skip_vid))
sio_data->vid_value = superio_inb(IT87_SIO_VID_REG);
reg = superio_inb(IT87_SIO_PINX2_REG);
@@ -1236,8 +1264,7 @@ static int __devinit it87_probe(struct platform_device *pdev)
}
}
- if (data->type == it8712 || data->type == it8716
- || data->type == it8718 || data->type == it8720) {
+ if (!sio_data->skip_vid) {
data->vrm = vid_which_vrm();
/* VID reading from Super-I/O config space if available */
data->vid = sio_data->vid_value;
@@ -1355,8 +1382,10 @@ static int __devinit it87_check_pwm(struct device *dev)
/* Called when we have found a new IT87. */
static void __devinit it87_init_device(struct platform_device *pdev)
{
+ struct it87_sio_data *sio_data = pdev->dev.platform_data;
struct it87_data *data = platform_get_drvdata(pdev);
int tmp, i;
+ u8 mask;
/* initialize to sane defaults:
* - if the chip is in manual pwm mode, this will be overwritten with
@@ -1402,10 +1431,11 @@ static void __devinit it87_init_device(struct platform_device *pdev)
}
/* Check if tachometers are reset manually or by some reason */
+ mask = 0x70 & ~(sio_data->skip_fan << 4);
data->fan_main_ctrl = it87_read_value(data, IT87_REG_FAN_MAIN_CTRL);
- if ((data->fan_main_ctrl & 0x70) == 0) {
+ if ((data->fan_main_ctrl & mask) == 0) {
/* Enable all fan tachometers */
- data->fan_main_ctrl |= 0x70;
+ data->fan_main_ctrl |= mask;
it87_write_value(data, IT87_REG_FAN_MAIN_CTRL, data->fan_main_ctrl);
}
data->has_fan = (data->fan_main_ctrl >> 4) & 0x07;
@@ -1428,6 +1458,9 @@ static void __devinit it87_init_device(struct platform_device *pdev)
}
}
+ /* Fan input pins may be used for alternative functions */
+ data->has_fan &= ~sio_data->skip_fan;
+
/* Set current fan mode registers and the default settings for the
* other mode registers */
for (i = 0; i < 3; i++) {
diff --git a/drivers/hwmon/lm63.c b/drivers/hwmon/lm63.c
index 3195a265f0e9e6d2e44985a6cbdce19655fb4f33..5da66ab04f74d6e5abb05fa2468b25859d55b6c9 100644
--- a/drivers/hwmon/lm63.c
+++ b/drivers/hwmon/lm63.c
@@ -427,40 +427,34 @@ static int lm63_detect(struct i2c_client *new_client, int kind,
struct i2c_board_info *info)
{
struct i2c_adapter *adapter = new_client->adapter;
+ u8 man_id, chip_id, reg_config1, reg_config2;
+ u8 reg_alert_status, reg_alert_mask;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
return -ENODEV;
- if (kind < 0) { /* must identify */
- u8 man_id, chip_id, reg_config1, reg_config2;
- u8 reg_alert_status, reg_alert_mask;
-
- man_id = i2c_smbus_read_byte_data(new_client,
- LM63_REG_MAN_ID);
- chip_id = i2c_smbus_read_byte_data(new_client,
- LM63_REG_CHIP_ID);
- reg_config1 = i2c_smbus_read_byte_data(new_client,
- LM63_REG_CONFIG1);
- reg_config2 = i2c_smbus_read_byte_data(new_client,
- LM63_REG_CONFIG2);
- reg_alert_status = i2c_smbus_read_byte_data(new_client,
- LM63_REG_ALERT_STATUS);
- reg_alert_mask = i2c_smbus_read_byte_data(new_client,
- LM63_REG_ALERT_MASK);
-
- if (man_id == 0x01 /* National Semiconductor */
- && chip_id == 0x41 /* LM63 */
- && (reg_config1 & 0x18) == 0x00
- && (reg_config2 & 0xF8) == 0x00
- && (reg_alert_status & 0x20) == 0x00
- && (reg_alert_mask & 0xA4) == 0xA4) {
- kind = lm63;
- } else { /* failed */
- dev_dbg(&adapter->dev, "Unsupported chip "
- "(man_id=0x%02X, chip_id=0x%02X).\n",
- man_id, chip_id);
- return -ENODEV;
- }
+ man_id = i2c_smbus_read_byte_data(new_client, LM63_REG_MAN_ID);
+ chip_id = i2c_smbus_read_byte_data(new_client, LM63_REG_CHIP_ID);
+
+ reg_config1 = i2c_smbus_read_byte_data(new_client,
+ LM63_REG_CONFIG1);
+ reg_config2 = i2c_smbus_read_byte_data(new_client,
+ LM63_REG_CONFIG2);
+ reg_alert_status = i2c_smbus_read_byte_data(new_client,
+ LM63_REG_ALERT_STATUS);
+ reg_alert_mask = i2c_smbus_read_byte_data(new_client,
+ LM63_REG_ALERT_MASK);
+
+ if (man_id != 0x01 /* National Semiconductor */
+ || chip_id != 0x41 /* LM63 */
+ || (reg_config1 & 0x18) != 0x00
+ || (reg_config2 & 0xF8) != 0x00
+ || (reg_alert_status & 0x20) != 0x00
+ || (reg_alert_mask & 0xA4) != 0xA4) {
+ dev_dbg(&adapter->dev,
+ "Unsupported chip (man_id=0x%02X, chip_id=0x%02X)\n",
+ man_id, chip_id);
+ return -ENODEV;
}
strlcpy(info->type, "lm63", I2C_NAME_SIZE);
diff --git a/drivers/hwmon/lm73.c b/drivers/hwmon/lm73.c
new file mode 100644
index 0000000000000000000000000000000000000000..0bf8b2a8e9f0957723f6ee59b75bcf5cf08a5084
--- /dev/null
+++ b/drivers/hwmon/lm73.c
@@ -0,0 +1,205 @@
+/*
+ * LM73 Sensor driver
+ * Based on LM75
+ *
+ * Copyright (C) 2007, CenoSYS (www.cenosys.com).
+ * Copyright (C) 2009, Bollore telecom (www.bolloretelecom.eu).
+ *
+ * Guillaume Ligneul <guillaume.ligneul@gmail.com>
+ * Adrien Demarez <adrien.demarez@bolloretelecom.eu>
+ * Jeremy Laine <jeremy.laine@bolloretelecom.eu>
+ *
+ * This software program is licensed subject to the GNU General Public License
+ * (GPL).Version 2,June 1991, available at
+ * http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/err.h>
+
+
+/* Addresses scanned */
+static const unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4c,
+ 0x4d, 0x4e, I2C_CLIENT_END };
+
+/* Insmod parameters */
+I2C_CLIENT_INSMOD_1(lm73);
+
+/* LM73 registers */
+#define LM73_REG_INPUT 0x00
+#define LM73_REG_CONF 0x01
+#define LM73_REG_MAX 0x02
+#define LM73_REG_MIN 0x03
+#define LM73_REG_CTRL 0x04
+#define LM73_REG_ID 0x07
+
+#define LM73_ID 0x9001 /* or 0x190 after a swab16() */
+#define DRVNAME "lm73"
+#define LM73_TEMP_MIN (-40)
+#define LM73_TEMP_MAX 150
+
+/*-----------------------------------------------------------------------*/
+
+
+static ssize_t set_temp(struct device *dev, struct device_attribute *da,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+ struct i2c_client *client = to_i2c_client(dev);
+ long temp;
+ short value;
+
+ int status = strict_strtol(buf, 10, &temp);
+ if (status < 0)
+ return status;
+
+ /* Write value */
+ value = (short) SENSORS_LIMIT(temp/250, (LM73_TEMP_MIN*4),
+ (LM73_TEMP_MAX*4)) << 5;
+ i2c_smbus_write_word_data(client, attr->index, swab16(value));
+ return count;
+}
+
+static ssize_t show_temp(struct device *dev, struct device_attribute *da,
+ char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+ struct i2c_client *client = to_i2c_client(dev);
+ /* use integer division instead of equivalent right shift to
+ guarantee arithmetic shift and preserve the sign */
+ int temp = ((s16) (swab16(i2c_smbus_read_word_data(client,
+ attr->index)))*250) / 32;
+ return sprintf(buf, "%d\n", temp);
+}
+
+
+/*-----------------------------------------------------------------------*/
+
+/* sysfs attributes for hwmon */
+
+static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO,
+ show_temp, set_temp, LM73_REG_MAX);
+static SENSOR_DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO,
+ show_temp, set_temp, LM73_REG_MIN);
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO,
+ show_temp, NULL, LM73_REG_INPUT);
+
+
+static struct attribute *lm73_attributes[] = {
+ &sensor_dev_attr_temp1_input.dev_attr.attr,
+ &sensor_dev_attr_temp1_max.dev_attr.attr,
+ &sensor_dev_attr_temp1_min.dev_attr.attr,
+
+ NULL
+};
+
+static const struct attribute_group lm73_group = {
+ .attrs = lm73_attributes,
+};
+
+/*-----------------------------------------------------------------------*/
+
+/* device probe and removal */
+
+static int
+lm73_probe(struct i2c_client *client, const struct i2c_device_id *id)
+{
+ struct device *hwmon_dev;
+ int status;
+
+ /* Register sysfs hooks */
+ status = sysfs_create_group(&client->dev.kobj, &lm73_group);
+ if (status)
+ return status;
+
+ hwmon_dev = hwmon_device_register(&client->dev);
+ if (IS_ERR(hwmon_dev)) {
+ status = PTR_ERR(hwmon_dev);
+ goto exit_remove;
+ }
+ i2c_set_clientdata(client, hwmon_dev);
+
+ dev_info(&client->dev, "%s: sensor '%s'\n",
+ dev_name(hwmon_dev), client->name);
+
+ return 0;
+
+exit_remove:
+ sysfs_remove_group(&client->dev.kobj, &lm73_group);
+ return status;
+}
+
+static int lm73_remove(struct i2c_client *client)
+{
+ struct device *hwmon_dev = i2c_get_clientdata(client);
+
+ hwmon_device_unregister(hwmon_dev);
+ sysfs_remove_group(&client->dev.kobj, &lm73_group);
+ i2c_set_clientdata(client, NULL);
+ return 0;
+}
+
+static const struct i2c_device_id lm73_ids[] = {
+ { "lm73", lm73 },
+ { /* LIST END */ }
+};
+MODULE_DEVICE_TABLE(i2c, lm73_ids);
+
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int lm73_detect(struct i2c_client *new_client, int kind,
+ struct i2c_board_info *info)
+{
+ struct i2c_adapter *adapter = new_client->adapter;
+ u16 id;
+ u8 ctrl;
+
+ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
+ I2C_FUNC_SMBUS_WORD_DATA))
+ return -ENODEV;
+
+ /* Check device ID */
+ id = i2c_smbus_read_word_data(new_client, LM73_REG_ID);
+ ctrl = i2c_smbus_read_byte_data(new_client, LM73_REG_CTRL);
+ if ((id != LM73_ID) || (ctrl & 0x10))
+ return -ENODEV;
+
+ strlcpy(info->type, "lm73", I2C_NAME_SIZE);
+
+ return 0;
+}
+
+static struct i2c_driver lm73_driver = {
+ .class = I2C_CLASS_HWMON,
+ .driver = {
+ .name = "lm73",
+ },
+ .probe = lm73_probe,
+ .remove = lm73_remove,
+ .id_table = lm73_ids,
+ .detect = lm73_detect,
+ .address_data = &addr_data,
+};
+
+/* module glue */
+
+static int __init sensors_lm73_init(void)
+{
+ return i2c_add_driver(&lm73_driver);
+}
+
+static void __exit sensors_lm73_exit(void)
+{
+ i2c_del_driver(&lm73_driver);
+}
+
+MODULE_AUTHOR("Guillaume Ligneul <guillaume.ligneul@gmail.com>");
+MODULE_DESCRIPTION("LM73 driver");
+MODULE_LICENSE("GPL");
+
+module_init(sensors_lm73_init);
+module_exit(sensors_lm73_exit);
diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c
index 55bd87c15c9a56bf55971ab31d4173fe1b6842d9..e392548cccb8c8c399ab44b511c9b40c197fef53 100644
--- a/drivers/hwmon/lm75.c
+++ b/drivers/hwmon/lm75.c
@@ -239,6 +239,7 @@ static int lm75_detect(struct i2c_client *new_client, int kind,
{
struct i2c_adapter *adapter = new_client->adapter;
int i;
+ int cur, conf, hyst, os;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
I2C_FUNC_SMBUS_WORD_DATA))
@@ -251,40 +252,35 @@ static int lm75_detect(struct i2c_client *new_client, int kind,
The cycling+unused addresses combination is not tested,
since it would significantly slow the detection down and would
hardly add any value. */
- if (kind < 0) {
- int cur, conf, hyst, os;
-
- /* Unused addresses */
- cur = i2c_smbus_read_word_data(new_client, 0);
- conf = i2c_smbus_read_byte_data(new_client, 1);
- hyst = i2c_smbus_read_word_data(new_client, 2);
- if (i2c_smbus_read_word_data(new_client, 4) != hyst
- || i2c_smbus_read_word_data(new_client, 5) != hyst
- || i2c_smbus_read_word_data(new_client, 6) != hyst
- || i2c_smbus_read_word_data(new_client, 7) != hyst)
- return -ENODEV;
- os = i2c_smbus_read_word_data(new_client, 3);
- if (i2c_smbus_read_word_data(new_client, 4) != os
- || i2c_smbus_read_word_data(new_client, 5) != os
- || i2c_smbus_read_word_data(new_client, 6) != os
- || i2c_smbus_read_word_data(new_client, 7) != os)
- return -ENODEV;
- /* Unused bits */
- if (conf & 0xe0)
- return -ENODEV;
+ /* Unused addresses */
+ cur = i2c_smbus_read_word_data(new_client, 0);
+ conf = i2c_smbus_read_byte_data(new_client, 1);
+ hyst = i2c_smbus_read_word_data(new_client, 2);
+ if (i2c_smbus_read_word_data(new_client, 4) != hyst
+ || i2c_smbus_read_word_data(new_client, 5) != hyst
+ || i2c_smbus_read_word_data(new_client, 6) != hyst
+ || i2c_smbus_read_word_data(new_client, 7) != hyst)
+ return -ENODEV;
+ os = i2c_smbus_read_word_data(new_client, 3);
+ if (i2c_smbus_read_word_data(new_client, 4) != os
+ || i2c_smbus_read_word_data(new_client, 5) != os
+ || i2c_smbus_read_word_data(new_client, 6) != os
+ || i2c_smbus_read_word_data(new_client, 7) != os)
+ return -ENODEV;
- /* Addresses cycling */
- for (i = 8; i < 0xff; i += 8)
- if (i2c_smbus_read_byte_data(new_client, i + 1) != conf
- || i2c_smbus_read_word_data(new_client, i + 2) != hyst
- || i2c_smbus_read_word_data(new_client, i + 3) != os)
- return -ENODEV;
+ /* Unused bits */
+ if (conf & 0xe0)
+ return -ENODEV;
+
+ /* Addresses cycling */
+ for (i = 8; i < 0xff; i += 8) {
+ if (i2c_smbus_read_byte_data(new_client, i + 1) != conf
+ || i2c_smbus_read_word_data(new_client, i + 2) != hyst
+ || i2c_smbus_read_word_data(new_client, i + 3) != os)
+ return -ENODEV;
}
- /* NOTE: we treat "force=..." and "force_lm75=..." the same.
- * Only new-style driver binding distinguishes chip types.
- */
strlcpy(info->type, "lm75", I2C_NAME_SIZE);
return 0;
diff --git a/drivers/hwmon/lm77.c b/drivers/hwmon/lm77.c
index 866b401ab6e86937f5880d9b7571df72081e9665..ac067fd1948212a42d3972696dbccc771238da05 100644
--- a/drivers/hwmon/lm77.c
+++ b/drivers/hwmon/lm77.c
@@ -249,6 +249,7 @@ static int lm77_detect(struct i2c_client *new_client, int kind,
struct i2c_board_info *info)
{
struct i2c_adapter *adapter = new_client->adapter;
+ int i, cur, conf, hyst, crit, min, max;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
I2C_FUNC_SMBUS_WORD_DATA))
@@ -265,51 +266,48 @@ static int lm77_detect(struct i2c_client *new_client, int kind,
4. registers cycling over 8-address boundaries
Word-sized registers are high-byte first. */
- if (kind < 0) {
- int i, cur, conf, hyst, crit, min, max;
-
- /* addresses cycling */
- cur = i2c_smbus_read_word_data(new_client, 0);
- conf = i2c_smbus_read_byte_data(new_client, 1);
- hyst = i2c_smbus_read_word_data(new_client, 2);
- crit = i2c_smbus_read_word_data(new_client, 3);
- min = i2c_smbus_read_word_data(new_client, 4);
- max = i2c_smbus_read_word_data(new_client, 5);
- for (i = 8; i <= 0xff; i += 8)
- if (i2c_smbus_read_byte_data(new_client, i + 1) != conf
- || i2c_smbus_read_word_data(new_client, i + 2) != hyst
- || i2c_smbus_read_word_data(new_client, i + 3) != crit
- || i2c_smbus_read_word_data(new_client, i + 4) != min
- || i2c_smbus_read_word_data(new_client, i + 5) != max)
- return -ENODEV;
-
- /* sign bits */
- if (((cur & 0x00f0) != 0xf0 && (cur & 0x00f0) != 0x0)
- || ((hyst & 0x00f0) != 0xf0 && (hyst & 0x00f0) != 0x0)
- || ((crit & 0x00f0) != 0xf0 && (crit & 0x00f0) != 0x0)
- || ((min & 0x00f0) != 0xf0 && (min & 0x00f0) != 0x0)
- || ((max & 0x00f0) != 0xf0 && (max & 0x00f0) != 0x0))
- return -ENODEV;
- /* unused bits */
- if (conf & 0xe0)
+ /* addresses cycling */
+ cur = i2c_smbus_read_word_data(new_client, 0);
+ conf = i2c_smbus_read_byte_data(new_client, 1);
+ hyst = i2c_smbus_read_word_data(new_client, 2);
+ crit = i2c_smbus_read_word_data(new_client, 3);
+ min = i2c_smbus_read_word_data(new_client, 4);
+ max = i2c_smbus_read_word_data(new_client, 5);
+ for (i = 8; i <= 0xff; i += 8) {
+ if (i2c_smbus_read_byte_data(new_client, i + 1) != conf
+ || i2c_smbus_read_word_data(new_client, i + 2) != hyst
+ || i2c_smbus_read_word_data(new_client, i + 3) != crit
+ || i2c_smbus_read_word_data(new_client, i + 4) != min
+ || i2c_smbus_read_word_data(new_client, i + 5) != max)
return -ENODEV;
+ }
- /* 0x06 and 0x07 return the last read value */
- cur = i2c_smbus_read_word_data(new_client, 0);
- if (i2c_smbus_read_word_data(new_client, 6) != cur
- || i2c_smbus_read_word_data(new_client, 7) != cur)
- return -ENODEV;
- hyst = i2c_smbus_read_word_data(new_client, 2);
- if (i2c_smbus_read_word_data(new_client, 6) != hyst
- || i2c_smbus_read_word_data(new_client, 7) != hyst)
- return -ENODEV;
- min = i2c_smbus_read_word_data(new_client, 4);
- if (i2c_smbus_read_word_data(new_client, 6) != min
- || i2c_smbus_read_word_data(new_client, 7) != min)
- return -ENODEV;
+ /* sign bits */
+ if (((cur & 0x00f0) != 0xf0 && (cur & 0x00f0) != 0x0)
+ || ((hyst & 0x00f0) != 0xf0 && (hyst & 0x00f0) != 0x0)
+ || ((crit & 0x00f0) != 0xf0 && (crit & 0x00f0) != 0x0)
+ || ((min & 0x00f0) != 0xf0 && (min & 0x00f0) != 0x0)
+ || ((max & 0x00f0) != 0xf0 && (max & 0x00f0) != 0x0))
+ return -ENODEV;
- }
+ /* unused bits */
+ if (conf & 0xe0)
+ return -ENODEV;
+
+ /* 0x06 and 0x07 return the last read value */
+ cur = i2c_smbus_read_word_data(new_client, 0);
+ if (i2c_smbus_read_word_data(new_client, 6) != cur
+ || i2c_smbus_read_word_data(new_client, 7) != cur)
+ return -ENODEV;
+ hyst = i2c_smbus_read_word_data(new_client, 2);
+ if (i2c_smbus_read_word_data(new_client, 6) != hyst
+ || i2c_smbus_read_word_data(new_client, 7) != hyst)
+ return -ENODEV;
+ min = i2c_smbus_read_word_data(new_client, 4);
+ if (i2c_smbus_read_word_data(new_client, 6) != min
+ || i2c_smbus_read_word_data(new_client, 7) != min)
+ return -ENODEV;
strlcpy(info->type, "lm77", I2C_NAME_SIZE);
diff --git a/drivers/hwmon/lm78.c b/drivers/hwmon/lm78.c
index f7e70163e016a215429aff63819172147cb2104a..5978291cebb370f63965e510947d48d0fa480e65 100644
--- a/drivers/hwmon/lm78.c
+++ b/drivers/hwmon/lm78.c
@@ -576,52 +576,34 @@ static int lm78_i2c_detect(struct i2c_client *client, int kind,
if (isa)
mutex_lock(&isa->update_lock);
- if (kind < 0) {
- if ((i2c_smbus_read_byte_data(client, LM78_REG_CONFIG) & 0x80)
- || i2c_smbus_read_byte_data(client, LM78_REG_I2C_ADDR)
- != address)
- goto err_nodev;
-
- /* Explicitly prevent the misdetection of Winbond chips */
- i = i2c_smbus_read_byte_data(client, 0x4f);
- if (i == 0xa3 || i == 0x5c)
- goto err_nodev;
- }
+ if ((i2c_smbus_read_byte_data(client, LM78_REG_CONFIG) & 0x80)
+ || i2c_smbus_read_byte_data(client, LM78_REG_I2C_ADDR) != address)
+ goto err_nodev;
+
+ /* Explicitly prevent the misdetection of Winbond chips */
+ i = i2c_smbus_read_byte_data(client, 0x4f);
+ if (i == 0xa3 || i == 0x5c)
+ goto err_nodev;
/* Determine the chip type. */
- if (kind <= 0) {
- i = i2c_smbus_read_byte_data(client, LM78_REG_CHIPID);
- if (i == 0x00 || i == 0x20 /* LM78 */
- || i == 0x40) /* LM78-J */
- kind = lm78;
- else if ((i & 0xfe) == 0xc0)
- kind = lm79;
- else {
- if (kind == 0)
- dev_warn(&adapter->dev, "Ignoring 'force' "
- "parameter for unknown chip at "
- "adapter %d, address 0x%02x\n",
- i2c_adapter_id(adapter), address);
- goto err_nodev;
- }
+ i = i2c_smbus_read_byte_data(client, LM78_REG_CHIPID);
+ if (i == 0x00 || i == 0x20 /* LM78 */
+ || i == 0x40) /* LM78-J */
+ client_name = "lm78";
+ else if ((i & 0xfe) == 0xc0)
+ client_name = "lm79";
+ else
+ goto err_nodev;
- if (lm78_alias_detect(client, i)) {
- dev_dbg(&adapter->dev, "Device at 0x%02x appears to "
- "be the same as ISA device\n", address);
- goto err_nodev;
- }
+ if (lm78_alias_detect(client, i)) {
+ dev_dbg(&adapter->dev, "Device at 0x%02x appears to "
+ "be the same as ISA device\n", address);
+ goto err_nodev;
}
if (isa)
mutex_unlock(&isa->update_lock);
- switch (kind) {
- case lm79:
- client_name = "lm79";
- break;
- default:
- client_name = "lm78";
- }
strlcpy(info->type, client_name, I2C_NAME_SIZE);
return 0;
diff --git a/drivers/hwmon/lm83.c b/drivers/hwmon/lm83.c
index e59e2d1f080c9ba1ee279fb5f7cfba925672c295..08b03e6ed0b7adf3a21aab5ac42c4062982fa767 100644
--- a/drivers/hwmon/lm83.c
+++ b/drivers/hwmon/lm83.c
@@ -1,7 +1,7 @@
/*
* lm83.c - Part of lm_sensors, Linux kernel modules for hardware
* monitoring
- * Copyright (C) 2003-2008 Jean Delvare <khali@linux-fr.org>
+ * Copyright (C) 2003-2009 Jean Delvare <khali@linux-fr.org>
*
* Heavily inspired from the lm78, lm75 and adm1021 drivers. The LM83 is
* a sensor chip made by National Semiconductor. It reports up to four
@@ -295,69 +295,40 @@ static int lm83_detect(struct i2c_client *new_client, int kind,
struct i2c_board_info *info)
{
struct i2c_adapter *adapter = new_client->adapter;
- const char *name = "";
+ const char *name;
+ u8 man_id, chip_id;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
return -ENODEV;
- /* Now we do the detection and identification. A negative kind
- * means that the driver was loaded with no force parameter
- * (default), so we must both detect and identify the chip
- * (actually there is only one possible kind of chip for now, LM83).
- * A zero kind means that the driver was loaded with the force
- * parameter, the detection step shall be skipped. A positive kind
- * means that the driver was loaded with the force parameter and a
- * given kind of chip is requested, so both the detection and the
- * identification steps are skipped. */
-
- /* Default to an LM83 if forced */
- if (kind == 0)
- kind = lm83;
-
- if (kind < 0) { /* detection */
- if (((i2c_smbus_read_byte_data(new_client, LM83_REG_R_STATUS1)
- & 0xA8) != 0x00) ||
- ((i2c_smbus_read_byte_data(new_client, LM83_REG_R_STATUS2)
- & 0x48) != 0x00) ||
- ((i2c_smbus_read_byte_data(new_client, LM83_REG_R_CONFIG)
- & 0x41) != 0x00)) {
- dev_dbg(&adapter->dev,
- "LM83 detection failed at 0x%02x.\n",
- new_client->addr);
- return -ENODEV;
- }
+ /* Detection */
+ if ((i2c_smbus_read_byte_data(new_client, LM83_REG_R_STATUS1) & 0xA8) ||
+ (i2c_smbus_read_byte_data(new_client, LM83_REG_R_STATUS2) & 0x48) ||
+ (i2c_smbus_read_byte_data(new_client, LM83_REG_R_CONFIG) & 0x41)) {
+ dev_dbg(&adapter->dev, "LM83 detection failed at 0x%02x\n",
+ new_client->addr);
+ return -ENODEV;
}
- if (kind <= 0) { /* identification */
- u8 man_id, chip_id;
-
- man_id = i2c_smbus_read_byte_data(new_client,
- LM83_REG_R_MAN_ID);
- chip_id = i2c_smbus_read_byte_data(new_client,
- LM83_REG_R_CHIP_ID);
-
- if (man_id == 0x01) { /* National Semiconductor */
- if (chip_id == 0x03) {
- kind = lm83;
- } else
- if (chip_id == 0x01) {
- kind = lm82;
- }
- }
-
- if (kind <= 0) { /* identification failed */
- dev_info(&adapter->dev,
- "Unsupported chip (man_id=0x%02X, "
- "chip_id=0x%02X).\n", man_id, chip_id);
- return -ENODEV;
- }
- }
+ /* Identification */
+ man_id = i2c_smbus_read_byte_data(new_client, LM83_REG_R_MAN_ID);
+ if (man_id != 0x01) /* National Semiconductor */
+ return -ENODEV;
- if (kind == lm83) {
+ chip_id = i2c_smbus_read_byte_data(new_client, LM83_REG_R_CHIP_ID);
+ switch (chip_id) {
+ case 0x03:
name = "lm83";
- } else
- if (kind == lm82) {
+ break;
+ case 0x01:
name = "lm82";
+ break;
+ default:
+ /* identification failed */
+ dev_info(&adapter->dev,
+ "Unsupported chip (man_id=0x%02X, chip_id=0x%02X)\n",
+ man_id, chip_id);
+ return -ENODEV;
}
strlcpy(info->type, name, I2C_NAME_SIZE);
diff --git a/drivers/hwmon/lm85.c b/drivers/hwmon/lm85.c
index 6c53d987de1088dc5f4a199b6a0c44236b220ac4..d56da2e747080b210b907f0291795f93755bd135 100644
--- a/drivers/hwmon/lm85.c
+++ b/drivers/hwmon/lm85.c
@@ -5,7 +5,7 @@
Copyright (c) 2002, 2003 Philip Pokorny <ppokorny@penguincomputing.com>
Copyright (c) 2003 Margit Schubert-While <margitsw@t-online.de>
Copyright (c) 2004 Justin Thiessen <jthiessen@penguincomputing.com>
- Copyright (C) 2007, 2008 Jean Delvare <khali@linux-fr.org>
+ Copyright (C) 2007--2009 Jean Delvare <khali@linux-fr.org>
Chip details at <http://www.national.com/ds/LM/LM85.pdf>
@@ -1162,107 +1162,80 @@ static int lm85_detect(struct i2c_client *client, int kind,
struct i2c_adapter *adapter = client->adapter;
int address = client->addr;
const char *type_name;
+ int company, verstep;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
/* We need to be able to do byte I/O */
return -ENODEV;
}
- /* If auto-detecting, determine the chip type */
- if (kind < 0) {
- int company = lm85_read_value(client, LM85_REG_COMPANY);
- int verstep = lm85_read_value(client, LM85_REG_VERSTEP);
-
- dev_dbg(&adapter->dev, "Detecting device at 0x%02x with "
- "COMPANY: 0x%02x and VERSTEP: 0x%02x\n",
- address, company, verstep);
-
- /* All supported chips have the version in common */
- if ((verstep & LM85_VERSTEP_VMASK) != LM85_VERSTEP_GENERIC &&
- (verstep & LM85_VERSTEP_VMASK) != LM85_VERSTEP_GENERIC2) {
- dev_dbg(&adapter->dev, "Autodetection failed: "
- "unsupported version\n");
- return -ENODEV;
- }
- kind = any_chip;
-
- /* Now, refine the detection */
- if (company == LM85_COMPANY_NATIONAL) {
- switch (verstep) {
- case LM85_VERSTEP_LM85C:
- kind = lm85c;
- break;
- case LM85_VERSTEP_LM85B:
- kind = lm85b;
- break;
- case LM85_VERSTEP_LM96000_1:
- case LM85_VERSTEP_LM96000_2:
- /* Check for Winbond WPCD377I */
- if (lm85_is_fake(client)) {
- dev_dbg(&adapter->dev,
- "Found Winbond WPCD377I, "
- "ignoring\n");
- return -ENODEV;
- }
- break;
- }
- } else if (company == LM85_COMPANY_ANALOG_DEV) {
- switch (verstep) {
- case LM85_VERSTEP_ADM1027:
- kind = adm1027;
- break;
- case LM85_VERSTEP_ADT7463:
- case LM85_VERSTEP_ADT7463C:
- kind = adt7463;
- break;
- case LM85_VERSTEP_ADT7468_1:
- case LM85_VERSTEP_ADT7468_2:
- kind = adt7468;
- break;
- }
- } else if (company == LM85_COMPANY_SMSC) {
- switch (verstep) {
- case LM85_VERSTEP_EMC6D100_A0:
- case LM85_VERSTEP_EMC6D100_A1:
- /* Note: we can't tell a '100 from a '101 */
- kind = emc6d100;
- break;
- case LM85_VERSTEP_EMC6D102:
- kind = emc6d102;
- break;
+ /* Determine the chip type */
+ company = lm85_read_value(client, LM85_REG_COMPANY);
+ verstep = lm85_read_value(client, LM85_REG_VERSTEP);
+
+ dev_dbg(&adapter->dev, "Detecting device at 0x%02x with "
+ "COMPANY: 0x%02x and VERSTEP: 0x%02x\n",
+ address, company, verstep);
+
+ /* All supported chips have the version in common */
+ if ((verstep & LM85_VERSTEP_VMASK) != LM85_VERSTEP_GENERIC &&
+ (verstep & LM85_VERSTEP_VMASK) != LM85_VERSTEP_GENERIC2) {
+ dev_dbg(&adapter->dev,
+ "Autodetection failed: unsupported version\n");
+ return -ENODEV;
+ }
+ type_name = "lm85";
+
+ /* Now, refine the detection */
+ if (company == LM85_COMPANY_NATIONAL) {
+ switch (verstep) {
+ case LM85_VERSTEP_LM85C:
+ type_name = "lm85c";
+ break;
+ case LM85_VERSTEP_LM85B:
+ type_name = "lm85b";
+ break;
+ case LM85_VERSTEP_LM96000_1:
+ case LM85_VERSTEP_LM96000_2:
+ /* Check for Winbond WPCD377I */
+ if (lm85_is_fake(client)) {
+ dev_dbg(&adapter->dev,
+ "Found Winbond WPCD377I, ignoring\n");
+ return -ENODEV;
}
- } else {
- dev_dbg(&adapter->dev, "Autodetection failed: "
- "unknown vendor\n");
- return -ENODEV;
+ break;
+ }
+ } else if (company == LM85_COMPANY_ANALOG_DEV) {
+ switch (verstep) {
+ case LM85_VERSTEP_ADM1027:
+ type_name = "adm1027";
+ break;
+ case LM85_VERSTEP_ADT7463:
+ case LM85_VERSTEP_ADT7463C:
+ type_name = "adt7463";
+ break;
+ case LM85_VERSTEP_ADT7468_1:
+ case LM85_VERSTEP_ADT7468_2:
+ type_name = "adt7468";
+ break;
}
+ } else if (company == LM85_COMPANY_SMSC) {
+ switch (verstep) {
+ case LM85_VERSTEP_EMC6D100_A0:
+ case LM85_VERSTEP_EMC6D100_A1:
+ /* Note: we can't tell a '100 from a '101 */
+ type_name = "emc6d100";
+ break;
+ case LM85_VERSTEP_EMC6D102:
+ type_name = "emc6d102";
+ break;
+ }
+ } else {
+ dev_dbg(&adapter->dev,
+ "Autodetection failed: unknown vendor\n");
+ return -ENODEV;
}
- switch (kind) {
- case lm85b:
- type_name = "lm85b";
- break;
- case lm85c:
- type_name = "lm85c";
- break;
- case adm1027:
- type_name = "adm1027";
- break;
- case adt7463:
- type_name = "adt7463";
- break;
- case adt7468:
- type_name = "adt7468";
- break;
- case emc6d100:
- type_name = "emc6d100";
- break;
- case emc6d102:
- type_name = "emc6d102";
- break;
- default:
- type_name = "lm85";
- }
strlcpy(info->type, type_name, I2C_NAME_SIZE);
return 0;
diff --git a/drivers/hwmon/lm87.c b/drivers/hwmon/lm87.c
index 2e4a3cea95f7e957024d97af9f103551661bdcff..4929b1815eee47ee1a4c30b89d111b6eb0c468f8 100644
--- a/drivers/hwmon/lm87.c
+++ b/drivers/hwmon/lm87.c
@@ -666,37 +666,32 @@ static int lm87_detect(struct i2c_client *new_client, int kind,
struct i2c_board_info *info)
{
struct i2c_adapter *adapter = new_client->adapter;
- static const char *names[] = { "lm87", "adm1024" };
+ const char *name;
+ u8 cid, rev;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
return -ENODEV;
- /* Default to an LM87 if forced */
- if (kind == 0)
- kind = lm87;
+ if (lm87_read_value(new_client, LM87_REG_CONFIG) & 0x80)
+ return -ENODEV;
/* Now, we do the remaining detection. */
- if (kind < 0) {
- u8 cid = lm87_read_value(new_client, LM87_REG_COMPANY_ID);
- u8 rev = lm87_read_value(new_client, LM87_REG_REVISION);
-
- if (cid == 0x02 /* National Semiconductor */
- && (rev >= 0x01 && rev <= 0x08))
- kind = lm87;
- else if (cid == 0x41 /* Analog Devices */
- && (rev & 0xf0) == 0x10)
- kind = adm1024;
-
- if (kind < 0
- || (lm87_read_value(new_client, LM87_REG_CONFIG) & 0x80)) {
- dev_dbg(&adapter->dev,
- "LM87 detection failed at 0x%02x.\n",
- new_client->addr);
- return -ENODEV;
- }
+ cid = lm87_read_value(new_client, LM87_REG_COMPANY_ID);
+ rev = lm87_read_value(new_client, LM87_REG_REVISION);
+
+ if (cid == 0x02 /* National Semiconductor */
+ && (rev >= 0x01 && rev <= 0x08))
+ name = "lm87";
+ else if (cid == 0x41 /* Analog Devices */
+ && (rev & 0xf0) == 0x10)
+ name = "adm1024";
+ else {
+ dev_dbg(&adapter->dev, "LM87 detection failed at 0x%02x\n",
+ new_client->addr);
+ return -ENODEV;
}
- strlcpy(info->type, names[kind - 1], I2C_NAME_SIZE);
+ strlcpy(info->type, name, I2C_NAME_SIZE);
return 0;
}
diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c
index 1aff7575799d57d2ad5837c54c46bd8d5a65fd1a..b7c905f50ed437da556ebd37007b3b8440cb23b8 100644
--- a/drivers/hwmon/lm90.c
+++ b/drivers/hwmon/lm90.c
@@ -1,7 +1,7 @@
/*
* lm90.c - Part of lm_sensors, Linux kernel modules for hardware
* monitoring
- * Copyright (C) 2003-2008 Jean Delvare <khali@linux-fr.org>
+ * Copyright (C) 2003-2009 Jean Delvare <khali@linux-fr.org>
*
* Based on the lm83 driver. The LM90 is a sensor chip made by National
* Semiconductor. It reports up to two temperatures (its own plus up to
@@ -661,154 +661,118 @@ static int lm90_detect(struct i2c_client *new_client, int kind,
{
struct i2c_adapter *adapter = new_client->adapter;
int address = new_client->addr;
- const char *name = "";
+ const char *name = NULL;
+ int man_id, chip_id, reg_config1, reg_convrate;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
return -ENODEV;
- /*
- * Now we do the remaining detection. A negative kind means that
- * the driver was loaded with no force parameter (default), so we
- * must both detect and identify the chip. A zero kind means that
- * the driver was loaded with the force parameter, the detection
- * step shall be skipped. A positive kind means that the driver
- * was loaded with the force parameter and a given kind of chip is
- * requested, so both the detection and the identification steps
- * are skipped.
- */
-
- /* Default to an LM90 if forced */
- if (kind == 0)
- kind = lm90;
-
- if (kind < 0) { /* detection and identification */
- int man_id, chip_id, reg_config1, reg_convrate;
-
- if ((man_id = i2c_smbus_read_byte_data(new_client,
+ /* detection and identification */
+ if ((man_id = i2c_smbus_read_byte_data(new_client,
LM90_REG_R_MAN_ID)) < 0
- || (chip_id = i2c_smbus_read_byte_data(new_client,
+ || (chip_id = i2c_smbus_read_byte_data(new_client,
LM90_REG_R_CHIP_ID)) < 0
- || (reg_config1 = i2c_smbus_read_byte_data(new_client,
+ || (reg_config1 = i2c_smbus_read_byte_data(new_client,
LM90_REG_R_CONFIG1)) < 0
- || (reg_convrate = i2c_smbus_read_byte_data(new_client,
+ || (reg_convrate = i2c_smbus_read_byte_data(new_client,
LM90_REG_R_CONVRATE)) < 0)
+ return -ENODEV;
+
+ if ((address == 0x4C || address == 0x4D)
+ && man_id == 0x01) { /* National Semiconductor */
+ int reg_config2;
+
+ reg_config2 = i2c_smbus_read_byte_data(new_client,
+ LM90_REG_R_CONFIG2);
+ if (reg_config2 < 0)
return -ENODEV;
-
- if ((address == 0x4C || address == 0x4D)
- && man_id == 0x01) { /* National Semiconductor */
- int reg_config2;
-
- if ((reg_config2 = i2c_smbus_read_byte_data(new_client,
- LM90_REG_R_CONFIG2)) < 0)
- return -ENODEV;
-
- if ((reg_config1 & 0x2A) == 0x00
- && (reg_config2 & 0xF8) == 0x00
- && reg_convrate <= 0x09) {
- if (address == 0x4C
- && (chip_id & 0xF0) == 0x20) { /* LM90 */
- kind = lm90;
- } else
- if ((chip_id & 0xF0) == 0x30) { /* LM89/LM99 */
- kind = lm99;
- dev_info(&adapter->dev,
- "Assuming LM99 chip at "
- "0x%02x\n", address);
- dev_info(&adapter->dev,
- "If it is an LM89, pass "
- "force_lm86=%d,0x%02x when "
- "loading the lm90 driver\n",
- i2c_adapter_id(adapter),
- address);
- } else
- if (address == 0x4C
- && (chip_id & 0xF0) == 0x10) { /* LM86 */
- kind = lm86;
- }
- }
- } else
- if ((address == 0x4C || address == 0x4D)
- && man_id == 0x41) { /* Analog Devices */
- if ((chip_id & 0xF0) == 0x40 /* ADM1032 */
- && (reg_config1 & 0x3F) == 0x00
- && reg_convrate <= 0x0A) {
- kind = adm1032;
- } else
- if (chip_id == 0x51 /* ADT7461 */
- && (reg_config1 & 0x1B) == 0x00
- && reg_convrate <= 0x0A) {
- kind = adt7461;
- }
- } else
- if (man_id == 0x4D) { /* Maxim */
- /*
- * The MAX6657, MAX6658 and MAX6659 do NOT have a
- * chip_id register. Reading from that address will
- * return the last read value, which in our case is
- * those of the man_id register. Likewise, the config1
- * register seems to lack a low nibble, so the value
- * will be those of the previous read, so in our case
- * those of the man_id register.
- */
- if (chip_id == man_id
- && (address == 0x4C || address == 0x4D)
- && (reg_config1 & 0x1F) == (man_id & 0x0F)
- && reg_convrate <= 0x09) {
- kind = max6657;
+
+ if ((reg_config1 & 0x2A) == 0x00
+ && (reg_config2 & 0xF8) == 0x00
+ && reg_convrate <= 0x09) {
+ if (address == 0x4C
+ && (chip_id & 0xF0) == 0x20) { /* LM90 */
+ name = "lm90";
} else
- /* The chip_id register of the MAX6680 and MAX6681
- * holds the revision of the chip.
- * the lowest bit of the config1 register is unused
- * and should return zero when read, so should the
- * second to last bit of config1 (software reset)
- */
- if (chip_id == 0x01
- && (reg_config1 & 0x03) == 0x00
- && reg_convrate <= 0x07) {
- kind = max6680;
+ if ((chip_id & 0xF0) == 0x30) { /* LM89/LM99 */
+ name = "lm99";
+ dev_info(&adapter->dev,
+ "Assuming LM99 chip at 0x%02x\n",
+ address);
+ dev_info(&adapter->dev,
+ "If it is an LM89, instantiate it "
+ "with the new_device sysfs "
+ "interface\n");
} else
- /* The chip_id register of the MAX6646/6647/6649
- * holds the revision of the chip.
- * The lowest 6 bits of the config1 register are
- * unused and should return zero when read.
- */
- if (chip_id == 0x59
- && (reg_config1 & 0x3f) == 0x00
- && reg_convrate <= 0x07) {
- kind = max6646;
+ if (address == 0x4C
+ && (chip_id & 0xF0) == 0x10) { /* LM86 */
+ name = "lm86";
}
}
-
- if (kind <= 0) { /* identification failed */
- dev_dbg(&adapter->dev,
- "Unsupported chip at 0x%02x (man_id=0x%02X, "
- "chip_id=0x%02X)\n", address, man_id, chip_id);
- return -ENODEV;
+ } else
+ if ((address == 0x4C || address == 0x4D)
+ && man_id == 0x41) { /* Analog Devices */
+ if ((chip_id & 0xF0) == 0x40 /* ADM1032 */
+ && (reg_config1 & 0x3F) == 0x00
+ && reg_convrate <= 0x0A) {
+ name = "adm1032";
+ /* The ADM1032 supports PEC, but only if combined
+ transactions are not used. */
+ if (i2c_check_functionality(adapter,
+ I2C_FUNC_SMBUS_BYTE))
+ info->flags |= I2C_CLIENT_PEC;
+ } else
+ if (chip_id == 0x51 /* ADT7461 */
+ && (reg_config1 & 0x1B) == 0x00
+ && reg_convrate <= 0x0A) {
+ name = "adt7461";
+ }
+ } else
+ if (man_id == 0x4D) { /* Maxim */
+ /*
+ * The MAX6657, MAX6658 and MAX6659 do NOT have a chip_id
+ * register. Reading from that address will return the last
+ * read value, which in our case is those of the man_id
+ * register. Likewise, the config1 register seems to lack a
+ * low nibble, so the value will be those of the previous
+ * read, so in our case those of the man_id register.
+ */
+ if (chip_id == man_id
+ && (address == 0x4C || address == 0x4D)
+ && (reg_config1 & 0x1F) == (man_id & 0x0F)
+ && reg_convrate <= 0x09) {
+ name = "max6657";
+ } else
+ /*
+ * The chip_id register of the MAX6680 and MAX6681 holds the
+ * revision of the chip. The lowest bit of the config1 register
+ * is unused and should return zero when read, so should the
+ * second to last bit of config1 (software reset).
+ */
+ if (chip_id == 0x01
+ && (reg_config1 & 0x03) == 0x00
+ && reg_convrate <= 0x07) {
+ name = "max6680";
+ } else
+ /*
+ * The chip_id register of the MAX6646/6647/6649 holds the
+ * revision of the chip. The lowest 6 bits of the config1
+ * register are unused and should return zero when read.
+ */
+ if (chip_id == 0x59
+ && (reg_config1 & 0x3f) == 0x00
+ && reg_convrate <= 0x07) {
+ name = "max6646";
}
}
- /* Fill the i2c board info */
- if (kind == lm90) {
- name = "lm90";
- } else if (kind == adm1032) {
- name = "adm1032";
- /* The ADM1032 supports PEC, but only if combined
- transactions are not used. */
- if (i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE))
- info->flags |= I2C_CLIENT_PEC;
- } else if (kind == lm99) {
- name = "lm99";
- } else if (kind == lm86) {
- name = "lm86";
- } else if (kind == max6657) {
- name = "max6657";
- } else if (kind == max6680) {
- name = "max6680";
- } else if (kind == adt7461) {
- name = "adt7461";
- } else if (kind == max6646) {
- name = "max6646";
+ if (!name) { /* identification failed */
+ dev_dbg(&adapter->dev,
+ "Unsupported chip at 0x%02x (man_id=0x%02X, "
+ "chip_id=0x%02X)\n", address, man_id, chip_id);
+ return -ENODEV;
}
+
strlcpy(info->type, name, I2C_NAME_SIZE);
return 0;
diff --git a/drivers/hwmon/lm92.c b/drivers/hwmon/lm92.c
index b2e00c5a7eec6b015cbfe86023d7a6c8e5b8c1fd..47ac698709dc2e73650820f8305b6e095de74bef 100644
--- a/drivers/hwmon/lm92.c
+++ b/drivers/hwmon/lm92.c
@@ -323,31 +323,22 @@ static int lm92_detect(struct i2c_client *new_client, int kind,
struct i2c_board_info *info)
{
struct i2c_adapter *adapter = new_client->adapter;
+ u8 config;
+ u16 man_id;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA
| I2C_FUNC_SMBUS_WORD_DATA))
return -ENODEV;
- /* A negative kind means that the driver was loaded with no force
- parameter (default), so we must identify the chip. */
- if (kind < 0) {
- u8 config = i2c_smbus_read_byte_data(new_client,
- LM92_REG_CONFIG);
- u16 man_id = i2c_smbus_read_word_data(new_client,
- LM92_REG_MAN_ID);
-
- if ((config & 0xe0) == 0x00
- && man_id == 0x0180) {
- pr_info("lm92: Found National Semiconductor LM92 chip\n");
- kind = lm92;
- } else
- if (max6635_check(new_client)) {
- pr_info("lm92: Found Maxim MAX6635 chip\n");
- kind = lm92; /* No separate prefix */
- }
- else
- return -ENODEV;
- }
+ config = i2c_smbus_read_byte_data(new_client, LM92_REG_CONFIG);
+ man_id = i2c_smbus_read_word_data(new_client, LM92_REG_MAN_ID);
+
+ if ((config & 0xe0) == 0x00 && man_id == 0x0180)
+ pr_info("lm92: Found National Semiconductor LM92 chip\n");
+ else if (max6635_check(new_client))
+ pr_info("lm92: Found Maxim MAX6635 chip\n");
+ else
+ return -ENODEV;
strlcpy(info->type, "lm92", I2C_NAME_SIZE);
diff --git a/drivers/hwmon/lm93.c b/drivers/hwmon/lm93.c
index c48a284b831467b162e39195ff5342ae74244fcc..124dd7cea54cb72c2d94a0ecd9203fdc6047ce72 100644
--- a/drivers/hwmon/lm93.c
+++ b/drivers/hwmon/lm93.c
@@ -2505,34 +2505,24 @@ static int lm93_detect(struct i2c_client *client, int kind,
struct i2c_board_info *info)
{
struct i2c_adapter *adapter = client->adapter;
+ int mfr, ver;
if (!i2c_check_functionality(adapter, LM93_SMBUS_FUNC_MIN))
return -ENODEV;
/* detection */
- if (kind < 0) {
- int mfr = lm93_read_byte(client, LM93_REG_MFR_ID);
-
- if (mfr != 0x01) {
- dev_dbg(&adapter->dev,"detect failed, "
- "bad manufacturer id 0x%02x!\n", mfr);
- return -ENODEV;
- }
+ mfr = lm93_read_byte(client, LM93_REG_MFR_ID);
+ if (mfr != 0x01) {
+ dev_dbg(&adapter->dev,
+ "detect failed, bad manufacturer id 0x%02x!\n", mfr);
+ return -ENODEV;
}
- if (kind <= 0) {
- int ver = lm93_read_byte(client, LM93_REG_VER);
-
- if ((ver == LM93_MFR_ID) || (ver == LM93_MFR_ID_PROTOTYPE)) {
- kind = lm93;
- } else {
- dev_dbg(&adapter->dev,"detect failed, "
- "bad version id 0x%02x!\n", ver);
- if (kind == 0)
- dev_dbg(&adapter->dev,
- "(ignored 'force' parameter)\n");
- return -ENODEV;
- }
+ ver = lm93_read_byte(client, LM93_REG_VER);
+ if (ver != LM93_MFR_ID && ver != LM93_MFR_ID_PROTOTYPE) {
+ dev_dbg(&adapter->dev,
+ "detect failed, bad version id 0x%02x!\n", ver);
+ return -ENODEV;
}
strlcpy(info->type, "lm93", I2C_NAME_SIZE);
diff --git a/drivers/hwmon/lm95241.c b/drivers/hwmon/lm95241.c
index e34f9e402a2c259ecffc377958735189d952caaa..906b896cf1d0fa6616ce5a8750f54f8e1937bf75 100644
--- a/drivers/hwmon/lm95241.c
+++ b/drivers/hwmon/lm95241.c
@@ -315,51 +315,23 @@ static int lm95241_detect(struct i2c_client *new_client, int kind,
{
struct i2c_adapter *adapter = new_client->adapter;
int address = new_client->addr;
- const char *name = "";
+ const char *name;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
return -ENODEV;
- /*
- * Now we do the remaining detection. A negative kind means that
- * the driver was loaded with no force parameter (default), so we
- * must both detect and identify the chip. A zero kind means that
- * the driver was loaded with the force parameter, the detection
- * step shall be skipped. A positive kind means that the driver
- * was loaded with the force parameter and a given kind of chip is
- * requested, so both the detection and the identification steps
- * are skipped.
- */
- if (kind < 0) { /* detection */
- if ((i2c_smbus_read_byte_data(new_client, LM95241_REG_R_MAN_ID)
- != MANUFACTURER_ID)
- || (i2c_smbus_read_byte_data(new_client, LM95241_REG_R_CHIP_ID)
- < DEFAULT_REVISION)) {
- dev_dbg(&adapter->dev,
- "LM95241 detection failed at 0x%02x.\n",
- address);
- return -ENODEV;
- }
- }
-
- if (kind <= 0) { /* identification */
- if ((i2c_smbus_read_byte_data(new_client, LM95241_REG_R_MAN_ID)
- == MANUFACTURER_ID)
- && (i2c_smbus_read_byte_data(new_client, LM95241_REG_R_CHIP_ID)
- >= DEFAULT_REVISION)) {
-
- kind = lm95241;
-
- if (kind <= 0) { /* identification failed */
- dev_info(&adapter->dev, "Unsupported chip\n");
- return -ENODEV;
- }
- }
+ if ((i2c_smbus_read_byte_data(new_client, LM95241_REG_R_MAN_ID)
+ == MANUFACTURER_ID)
+ && (i2c_smbus_read_byte_data(new_client, LM95241_REG_R_CHIP_ID)
+ >= DEFAULT_REVISION)) {
+ name = "lm95241";
+ } else {
+ dev_dbg(&adapter->dev, "LM95241 detection failed at 0x%02x\n",
+ address);
+ return -ENODEV;
}
/* Fill the i2c board info */
- if (kind == lm95241)
- name = "lm95241";
strlcpy(info->type, name, I2C_NAME_SIZE);
return 0;
}
diff --git a/drivers/hwmon/max1619.c b/drivers/hwmon/max1619.c
index 7897754f3a5c3187a77786325ae3ab875af457fc..7fcf5ff89e7f903b7fee1dc4cfa10ac8769613be 100644
--- a/drivers/hwmon/max1619.c
+++ b/drivers/hwmon/max1619.c
@@ -226,58 +226,34 @@ static const struct attribute_group max1619_group = {
*/
/* Return 0 if detection is successful, -ENODEV otherwise */
-static int max1619_detect(struct i2c_client *new_client, int kind,
+static int max1619_detect(struct i2c_client *client, int kind,
struct i2c_board_info *info)
{
- struct i2c_adapter *adapter = new_client->adapter;
- u8 reg_config=0, reg_convrate=0, reg_status=0;
+ struct i2c_adapter *adapter = client->adapter;
+ u8 reg_config, reg_convrate, reg_status, man_id, chip_id;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
return -ENODEV;
- /*
- * Now we do the remaining detection. A negative kind means that
- * the driver was loaded with no force parameter (default), so we
- * must both detect and identify the chip. A zero kind means that
- * the driver was loaded with the force parameter, the detection
- * step shall be skipped. A positive kind means that the driver
- * was loaded with the force parameter and a given kind of chip is
- * requested, so both the detection and the identification steps
- * are skipped.
- */
- if (kind < 0) { /* detection */
- reg_config = i2c_smbus_read_byte_data(new_client,
- MAX1619_REG_R_CONFIG);
- reg_convrate = i2c_smbus_read_byte_data(new_client,
- MAX1619_REG_R_CONVRATE);
- reg_status = i2c_smbus_read_byte_data(new_client,
- MAX1619_REG_R_STATUS);
- if ((reg_config & 0x03) != 0x00
- || reg_convrate > 0x07 || (reg_status & 0x61 ) !=0x00) {
- dev_dbg(&adapter->dev,
- "MAX1619 detection failed at 0x%02x.\n",
- new_client->addr);
- return -ENODEV;
- }
+ /* detection */
+ reg_config = i2c_smbus_read_byte_data(client, MAX1619_REG_R_CONFIG);
+ reg_convrate = i2c_smbus_read_byte_data(client, MAX1619_REG_R_CONVRATE);
+ reg_status = i2c_smbus_read_byte_data(client, MAX1619_REG_R_STATUS);
+ if ((reg_config & 0x03) != 0x00
+ || reg_convrate > 0x07 || (reg_status & 0x61) != 0x00) {
+ dev_dbg(&adapter->dev, "MAX1619 detection failed at 0x%02x\n",
+ client->addr);
+ return -ENODEV;
}
- if (kind <= 0) { /* identification */
- u8 man_id, chip_id;
-
- man_id = i2c_smbus_read_byte_data(new_client,
- MAX1619_REG_R_MAN_ID);
- chip_id = i2c_smbus_read_byte_data(new_client,
- MAX1619_REG_R_CHIP_ID);
-
- if ((man_id == 0x4D) && (chip_id == 0x04))
- kind = max1619;
-
- if (kind <= 0) { /* identification failed */
- dev_info(&adapter->dev,
- "Unsupported chip (man_id=0x%02X, "
- "chip_id=0x%02X).\n", man_id, chip_id);
- return -ENODEV;
- }
+ /* identification */
+ man_id = i2c_smbus_read_byte_data(client, MAX1619_REG_R_MAN_ID);
+ chip_id = i2c_smbus_read_byte_data(client, MAX1619_REG_R_CHIP_ID);
+ if (man_id != 0x4D || chip_id != 0x04) {
+ dev_info(&adapter->dev,
+ "Unsupported chip (man_id=0x%02X, chip_id=0x%02X).\n",
+ man_id, chip_id);
+ return -ENODEV;
}
strlcpy(info->type, "max1619", I2C_NAME_SIZE);
diff --git a/drivers/hwmon/max6650.c b/drivers/hwmon/max6650.c
index 58f66be61b1fbb5e91498c87829b8c912cedc5bc..1da561e0cb37dbd6e8e8db112a94b4bdd5893a0b 100644
--- a/drivers/hwmon/max6650.c
+++ b/drivers/hwmon/max6650.c
@@ -534,7 +534,7 @@ static int max6650_detect(struct i2c_client *client, int kind,
struct i2c_adapter *adapter = client->adapter;
int address = client->addr;
- dev_dbg(&adapter->dev, "max6650_detect called, kind = %d\n", kind);
+ dev_dbg(&adapter->dev, "max6650_detect called\n");
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
dev_dbg(&adapter->dev, "max6650: I2C bus doesn't support "
@@ -542,23 +542,7 @@ static int max6650_detect(struct i2c_client *client, int kind,
return -ENODEV;
}
- /*
- * Now we do the remaining detection. A negative kind means that
- * the driver was loaded with no force parameter (default), so we
- * must both detect and identify the chip (actually there is only
- * one possible kind of chip for now, max6650). A zero kind means that
- * the driver was loaded with the force parameter, the detection
- * step shall be skipped. A positive kind means that the driver
- * was loaded with the force parameter and a given kind of chip is
- * requested, so both the detection and the identification steps
- * are skipped.
- *
- * Currently I can find no way to distinguish between a MAX6650 and
- * a MAX6651. This driver has only been tried on the former.
- */
-
- if ((kind < 0) &&
- ( (i2c_smbus_read_byte_data(client, MAX6650_REG_CONFIG) & 0xC0)
+ if (((i2c_smbus_read_byte_data(client, MAX6650_REG_CONFIG) & 0xC0)
||(i2c_smbus_read_byte_data(client, MAX6650_REG_GPIO_STAT) & 0xE0)
||(i2c_smbus_read_byte_data(client, MAX6650_REG_ALARM_EN) & 0xE0)
||(i2c_smbus_read_byte_data(client, MAX6650_REG_ALARM) & 0xE0)
diff --git a/drivers/hwmon/mc13783-adc.c b/drivers/hwmon/mc13783-adc.c
new file mode 100644
index 0000000000000000000000000000000000000000..883fa8197da42845086fb180e9196afb7e825e0e
--- /dev/null
+++ b/drivers/hwmon/mc13783-adc.c
@@ -0,0 +1,236 @@
+/*
+ * Driver for the Freescale Semiconductor MC13783 adc.
+ *
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2009 Sascha Hauer, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 51
+ * Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/mfd/mc13783-private.h>
+#include <linux/platform_device.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/hwmon.h>
+#include <linux/init.h>
+#include <linux/err.h>
+
+#define MC13783_ADC_NAME "mc13783-adc"
+
+struct mc13783_adc_priv {
+ struct mc13783 *mc13783;
+ struct device *hwmon_dev;
+};
+
+static ssize_t mc13783_adc_show_name(struct device *dev, struct device_attribute
+ *devattr, char *buf)
+{
+ return sprintf(buf, "mc13783_adc\n");
+}
+
+static int mc13783_adc_read(struct device *dev,
+ struct device_attribute *devattr, unsigned int *val)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct mc13783_adc_priv *priv = platform_get_drvdata(pdev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ unsigned int channel = attr->index;
+ unsigned int sample[4];
+ int ret;
+
+ ret = mc13783_adc_do_conversion(priv->mc13783,
+ MC13783_ADC_MODE_MULT_CHAN,
+ channel, sample);
+ if (ret)
+ return ret;
+
+ channel &= 0x7;
+
+ *val = (sample[channel % 4] >> (channel > 3 ? 14 : 2)) & 0x3ff;
+
+ return 0;
+}
+
+static ssize_t mc13783_adc_read_bp(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ unsigned val;
+ int ret = mc13783_adc_read(dev, devattr, &val);
+
+ if (ret)
+ return ret;
+
+ /*
+ * BP (channel 2) reports with offset 2.4V to the actual value to fit
+ * the input range of the ADC. unit = 2.25mV = 9/4 mV.
+ */
+ val = DIV_ROUND_CLOSEST(val * 9, 4) + 2400;
+
+ return sprintf(buf, "%u\n", val);
+}
+
+static ssize_t mc13783_adc_read_gp(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ unsigned val;
+ int ret = mc13783_adc_read(dev, devattr, &val);
+
+ if (ret)
+ return ret;
+
+ /*
+ * input range is [0, 2.3V], val has 10 bits, so each bit
+ * is worth 9/4 mV.
+ */
+ val = DIV_ROUND_CLOSEST(val * 9, 4);
+
+ return sprintf(buf, "%u\n", val);
+}
+
+static DEVICE_ATTR(name, S_IRUGO, mc13783_adc_show_name, NULL);
+static SENSOR_DEVICE_ATTR(in2_input, S_IRUGO, mc13783_adc_read_bp, NULL, 2);
+static SENSOR_DEVICE_ATTR(in5_input, S_IRUGO, mc13783_adc_read_gp, NULL, 5);
+static SENSOR_DEVICE_ATTR(in6_input, S_IRUGO, mc13783_adc_read_gp, NULL, 6);
+static SENSOR_DEVICE_ATTR(in7_input, S_IRUGO, mc13783_adc_read_gp, NULL, 7);
+static SENSOR_DEVICE_ATTR(in8_input, S_IRUGO, mc13783_adc_read_gp, NULL, 8);
+static SENSOR_DEVICE_ATTR(in9_input, S_IRUGO, mc13783_adc_read_gp, NULL, 9);
+static SENSOR_DEVICE_ATTR(in10_input, S_IRUGO, mc13783_adc_read_gp, NULL, 10);
+static SENSOR_DEVICE_ATTR(in11_input, S_IRUGO, mc13783_adc_read_gp, NULL, 11);
+static SENSOR_DEVICE_ATTR(in12_input, S_IRUGO, mc13783_adc_read_gp, NULL, 12);
+static SENSOR_DEVICE_ATTR(in13_input, S_IRUGO, mc13783_adc_read_gp, NULL, 13);
+static SENSOR_DEVICE_ATTR(in14_input, S_IRUGO, mc13783_adc_read_gp, NULL, 14);
+static SENSOR_DEVICE_ATTR(in15_input, S_IRUGO, mc13783_adc_read_gp, NULL, 15);
+
+static struct attribute *mc13783_attr[] = {
+ &dev_attr_name.attr,
+ &sensor_dev_attr_in2_input.dev_attr.attr,
+ &sensor_dev_attr_in5_input.dev_attr.attr,
+ &sensor_dev_attr_in6_input.dev_attr.attr,
+ &sensor_dev_attr_in7_input.dev_attr.attr,
+ &sensor_dev_attr_in8_input.dev_attr.attr,
+ &sensor_dev_attr_in9_input.dev_attr.attr,
+ &sensor_dev_attr_in10_input.dev_attr.attr,
+ &sensor_dev_attr_in11_input.dev_attr.attr,
+ NULL
+};
+
+static const struct attribute_group mc13783_group = {
+ .attrs = mc13783_attr,
+};
+
+/* last four channels may be occupied by the touchscreen */
+static struct attribute *mc13783_attr_ts[] = {
+ &sensor_dev_attr_in12_input.dev_attr.attr,
+ &sensor_dev_attr_in13_input.dev_attr.attr,
+ &sensor_dev_attr_in14_input.dev_attr.attr,
+ &sensor_dev_attr_in15_input.dev_attr.attr,
+ NULL
+};
+
+static const struct attribute_group mc13783_group_ts = {
+ .attrs = mc13783_attr_ts,
+};
+
+static int __init mc13783_adc_probe(struct platform_device *pdev)
+{
+ struct mc13783_adc_priv *priv;
+ int ret;
+
+ priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->mc13783 = dev_get_drvdata(pdev->dev.parent);
+
+ platform_set_drvdata(pdev, priv);
+
+ /* Register sysfs hooks */
+ ret = sysfs_create_group(&pdev->dev.kobj, &mc13783_group);
+ if (ret)
+ goto out_err_create1;
+
+ if (!(priv->mc13783->flags & MC13783_USE_TOUCHSCREEN))
+ ret = sysfs_create_group(&pdev->dev.kobj, &mc13783_group_ts);
+ if (ret)
+ goto out_err_create2;
+
+ priv->hwmon_dev = hwmon_device_register(&pdev->dev);
+ if (IS_ERR(priv->hwmon_dev)) {
+ ret = PTR_ERR(priv->hwmon_dev);
+ dev_err(&pdev->dev,
+ "hwmon_device_register failed with %d.\n", ret);
+ goto out_err_register;
+ }
+
+
+ return 0;
+
+out_err_register:
+
+ if (!(priv->mc13783->flags & MC13783_USE_TOUCHSCREEN))
+ sysfs_remove_group(&pdev->dev.kobj, &mc13783_group_ts);
+out_err_create2:
+
+ sysfs_remove_group(&pdev->dev.kobj, &mc13783_group);
+out_err_create1:
+
+ platform_set_drvdata(pdev, NULL);
+ kfree(priv);
+
+ return ret;
+}
+
+static int __devexit mc13783_adc_remove(struct platform_device *pdev)
+{
+ struct mc13783_adc_priv *priv = platform_get_drvdata(pdev);
+
+ hwmon_device_unregister(priv->hwmon_dev);
+
+ if (!(priv->mc13783->flags & MC13783_USE_TOUCHSCREEN))
+ sysfs_remove_group(&pdev->dev.kobj, &mc13783_group_ts);
+
+ sysfs_remove_group(&pdev->dev.kobj, &mc13783_group);
+
+ platform_set_drvdata(pdev, NULL);
+ kfree(priv);
+
+ return 0;
+}
+
+static struct platform_driver mc13783_adc_driver = {
+ .remove = __devexit_p(mc13783_adc_remove),
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = MC13783_ADC_NAME,
+ },
+};
+
+static int __init mc13783_adc_init(void)
+{
+ return platform_driver_probe(&mc13783_adc_driver, mc13783_adc_probe);
+}
+
+static void __exit mc13783_adc_exit(void)
+{
+ platform_driver_unregister(&mc13783_adc_driver);
+}
+
+module_init(mc13783_adc_init);
+module_exit(mc13783_adc_exit);
+
+MODULE_DESCRIPTION("MC13783 ADC driver");
+MODULE_AUTHOR("Luotao Fu <l.fu@pengutronix.de>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" MC13783_ADC_NAME);
diff --git a/drivers/hwmon/s3c-hwmon.c b/drivers/hwmon/s3c-hwmon.c
index 71835412529fca92dd4964dc28c95c6c749162be..3f3f9a47acfd92fa473a000f43552047a7e962de 100644
--- a/drivers/hwmon/s3c-hwmon.c
+++ b/drivers/hwmon/s3c-hwmon.c
@@ -323,7 +323,7 @@ static int __devinit s3c_hwmon_probe(struct platform_device *dev)
}
for (i = 0; i < ARRAY_SIZE(pdata->in); i++) {
- struct s3c24xx_adc_hwmon_incfg *cfg = pdata->in[i];
+ struct s3c_hwmon_chcfg *cfg = pdata->in[i];
if (!cfg)
continue;
@@ -333,7 +333,7 @@ static int __devinit s3c_hwmon_probe(struct platform_device *dev)
"channel %d multiplier too large\n",
i);
- if (cfg->divider == 0) {
+ if (cfg->div == 0) {
dev_err(&dev->dev, "channel %d divider zero\n", i);
continue;
}
diff --git a/drivers/hwmon/smsc47m192.c b/drivers/hwmon/smsc47m192.c
index 8bb5cb532d4d8c121595298729f7b85c03ed3d50..4d88c045781c6cbac9ebebb83037bc9364318adc 100644
--- a/drivers/hwmon/smsc47m192.c
+++ b/drivers/hwmon/smsc47m192.c
@@ -491,24 +491,22 @@ static int smsc47m192_detect(struct i2c_client *client, int kind,
return -ENODEV;
/* Detection criteria from sensors_detect script */
- if (kind < 0) {
- if (i2c_smbus_read_byte_data(client,
+ version = i2c_smbus_read_byte_data(client, SMSC47M192_REG_VERSION);
+ if (i2c_smbus_read_byte_data(client,
SMSC47M192_REG_COMPANY_ID) == 0x55
- && ((version = i2c_smbus_read_byte_data(client,
- SMSC47M192_REG_VERSION)) & 0xf0) == 0x20
- && (i2c_smbus_read_byte_data(client,
+ && (version & 0xf0) == 0x20
+ && (i2c_smbus_read_byte_data(client,
SMSC47M192_REG_VID) & 0x70) == 0x00
- && (i2c_smbus_read_byte_data(client,
+ && (i2c_smbus_read_byte_data(client,
SMSC47M192_REG_VID4) & 0xfe) == 0x80) {
- dev_info(&adapter->dev,
- "found SMSC47M192 or compatible, "
- "version 2, stepping A%d\n", version & 0x0f);
- } else {
- dev_dbg(&adapter->dev,
- "SMSC47M192 detection failed at 0x%02x\n",
- client->addr);
- return -ENODEV;
- }
+ dev_info(&adapter->dev,
+ "found SMSC47M192 or compatible, "
+ "version 2, stepping A%d\n", version & 0x0f);
+ } else {
+ dev_dbg(&adapter->dev,
+ "SMSC47M192 detection failed at 0x%02x\n",
+ client->addr);
+ return -ENODEV;
}
strlcpy(info->type, "smsc47m192", I2C_NAME_SIZE);
diff --git a/drivers/hwmon/thmc50.c b/drivers/hwmon/thmc50.c
index 7d97431e132f2f76fbc22e1e8d693d7c0e58b017..4b793849c73818eb3fd6d5c8cd2aca986d17d514 100644
--- a/drivers/hwmon/thmc50.c
+++ b/drivers/hwmon/thmc50.c
@@ -36,7 +36,11 @@ static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END };
/* Insmod parameters */
I2C_CLIENT_INSMOD_2(thmc50, adm1022);
-I2C_CLIENT_MODULE_PARM(adm1022_temp3, "List of adapter,address pairs "
+
+static unsigned short adm1022_temp3[16];
+static unsigned int adm1022_temp3_num;
+module_param_array(adm1022_temp3, ushort, &adm1022_temp3_num, 0);
+MODULE_PARM_DESC(adm1022_temp3, "List of adapter,address pairs "
"to enable 3rd temperature (ADM1022 only)");
/* Many THMC50 constants specified below */
@@ -289,7 +293,6 @@ static int thmc50_detect(struct i2c_client *client, int kind,
unsigned revision;
unsigned config;
struct i2c_adapter *adapter = client->adapter;
- int err = 0;
const char *type_name;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
@@ -301,31 +304,13 @@ static int thmc50_detect(struct i2c_client *client, int kind,
pr_debug("thmc50: Probing for THMC50 at 0x%2X on bus %d\n",
client->addr, i2c_adapter_id(client->adapter));
- /* Now, we do the remaining detection. */
company = i2c_smbus_read_byte_data(client, THMC50_REG_COMPANY_ID);
revision = i2c_smbus_read_byte_data(client, THMC50_REG_DIE_CODE);
config = i2c_smbus_read_byte_data(client, THMC50_REG_CONF);
+ if (revision < 0xc0 || (config & 0x10))
+ return -ENODEV;
- if (kind == 0)
- kind = thmc50;
- else if (kind < 0) {
- err = -ENODEV;
- if (revision >= 0xc0 && ((config & 0x10) == 0)) {
- if (company == 0x49) {
- kind = thmc50;
- err = 0;
- } else if (company == 0x41) {
- kind = adm1022;
- err = 0;
- }
- }
- }
- if (err == -ENODEV) {
- pr_debug("thmc50: Detection of THMC50/ADM1022 failed\n");
- return err;
- }
-
- if (kind == adm1022) {
+ if (company == 0x41) {
int id = i2c_adapter_id(client->adapter);
int i;
@@ -340,9 +325,13 @@ static int thmc50_detect(struct i2c_client *client, int kind,
config);
break;
}
- } else {
+ } else if (company == 0x49) {
type_name = "thmc50";
+ } else {
+ pr_debug("thmc50: Detection of THMC50/ADM1022 failed\n");
+ return -ENODEV;
}
+
pr_debug("thmc50: Detected %s (version %x, revision %x)\n",
type_name, (revision >> 4) - 0xc, revision & 0xf);
diff --git a/drivers/hwmon/tmp401.c b/drivers/hwmon/tmp401.c
index 7b34f2cd08bbf49258053fcc1b2caacc02867d03..ee9673467c4a7289ac8b0b6313d2ed3a4222a733 100644
--- a/drivers/hwmon/tmp401.c
+++ b/drivers/hwmon/tmp401.c
@@ -488,46 +488,43 @@ static void tmp401_init_client(struct i2c_client *client)
i2c_smbus_write_byte_data(client, TMP401_CONFIG_WRITE, config);
}
-static int tmp401_detect(struct i2c_client *client, int kind,
+static int tmp401_detect(struct i2c_client *client, int _kind,
struct i2c_board_info *info)
{
+ enum chips kind;
struct i2c_adapter *adapter = client->adapter;
+ u8 reg;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
return -ENODEV;
/* Detect and identify the chip */
- if (kind <= 0) {
- u8 reg;
-
- reg = i2c_smbus_read_byte_data(client,
- TMP401_MANUFACTURER_ID_REG);
- if (reg != TMP401_MANUFACTURER_ID)
- return -ENODEV;
-
- reg = i2c_smbus_read_byte_data(client, TMP401_DEVICE_ID_REG);
-
- switch (reg) {
- case TMP401_DEVICE_ID:
- kind = tmp401;
- break;
- case TMP411_DEVICE_ID:
- kind = tmp411;
- break;
- default:
- return -ENODEV;
- }
+ reg = i2c_smbus_read_byte_data(client, TMP401_MANUFACTURER_ID_REG);
+ if (reg != TMP401_MANUFACTURER_ID)
+ return -ENODEV;
- reg = i2c_smbus_read_byte_data(client, TMP401_CONFIG_READ);
- if (reg & 0x1b)
- return -ENODEV;
+ reg = i2c_smbus_read_byte_data(client, TMP401_DEVICE_ID_REG);
- reg = i2c_smbus_read_byte_data(client,
- TMP401_CONVERSION_RATE_READ);
- /* Datasheet says: 0x1-0x6 */
- if (reg > 15)
- return -ENODEV;
+ switch (reg) {
+ case TMP401_DEVICE_ID:
+ kind = tmp401;
+ break;
+ case TMP411_DEVICE_ID:
+ kind = tmp411;
+ break;
+ default:
+ return -ENODEV;
}
+
+ reg = i2c_smbus_read_byte_data(client, TMP401_CONFIG_READ);
+ if (reg & 0x1b)
+ return -ENODEV;
+
+ reg = i2c_smbus_read_byte_data(client, TMP401_CONVERSION_RATE_READ);
+ /* Datasheet says: 0x1-0x6 */
+ if (reg > 15)
+ return -ENODEV;
+
strlcpy(info->type, tmp401_id[kind - 1].name, I2C_NAME_SIZE);
return 0;
diff --git a/drivers/hwmon/tmp421.c b/drivers/hwmon/tmp421.c
index 20924343431b65f61048ca2fc05c5b1d93afbcd7..bb5464a289cac8e9b8d3cd5d9a39a98656276ad4 100644
--- a/drivers/hwmon/tmp421.c
+++ b/drivers/hwmon/tmp421.c
@@ -223,39 +223,36 @@ static int tmp421_init_client(struct i2c_client *client)
return 0;
}
-static int tmp421_detect(struct i2c_client *client, int kind,
+static int tmp421_detect(struct i2c_client *client, int _kind,
struct i2c_board_info *info)
{
+ enum chips kind;
struct i2c_adapter *adapter = client->adapter;
const char *names[] = { "TMP421", "TMP422", "TMP423" };
+ u8 reg;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
return -ENODEV;
- if (kind <= 0) {
- u8 reg;
-
- reg = i2c_smbus_read_byte_data(client,
- TMP421_MANUFACTURER_ID_REG);
- if (reg != TMP421_MANUFACTURER_ID)
- return -ENODEV;
-
- reg = i2c_smbus_read_byte_data(client,
- TMP421_DEVICE_ID_REG);
- switch (reg) {
- case TMP421_DEVICE_ID:
- kind = tmp421;
- break;
- case TMP422_DEVICE_ID:
- kind = tmp422;
- break;
- case TMP423_DEVICE_ID:
- kind = tmp423;
- break;
- default:
- return -ENODEV;
- }
+ reg = i2c_smbus_read_byte_data(client, TMP421_MANUFACTURER_ID_REG);
+ if (reg != TMP421_MANUFACTURER_ID)
+ return -ENODEV;
+
+ reg = i2c_smbus_read_byte_data(client, TMP421_DEVICE_ID_REG);
+ switch (reg) {
+ case TMP421_DEVICE_ID:
+ kind = tmp421;
+ break;
+ case TMP422_DEVICE_ID:
+ kind = tmp422;
+ break;
+ case TMP423_DEVICE_ID:
+ kind = tmp423;
+ break;
+ default:
+ return -ENODEV;
}
+
strlcpy(info->type, tmp421_id[kind - 1].name, I2C_NAME_SIZE);
dev_info(&adapter->dev, "Detected TI %s chip at 0x%02x\n",
names[kind - 1], client->addr);
diff --git a/drivers/hwmon/w83627hf.c b/drivers/hwmon/w83627hf.c
index 2be28ac4ede0d1d439daa60f8bf581f251cf66b9..b257c7223733c3fa1f9719bf0721bdd79425204c 100644
--- a/drivers/hwmon/w83627hf.c
+++ b/drivers/hwmon/w83627hf.c
@@ -59,10 +59,11 @@ static struct platform_device *pdev;
#define DRVNAME "w83627hf"
enum chips { w83627hf, w83627thf, w83697hf, w83637hf, w83687thf };
-static u16 force_addr;
-module_param(force_addr, ushort, 0);
-MODULE_PARM_DESC(force_addr,
- "Initialize the base address of the sensors");
+struct w83627hf_sio_data {
+ enum chips type;
+ int sioaddr;
+};
+
static u8 force_i2c = 0x1f;
module_param(force_i2c, byte, 0);
MODULE_PARM_DESC(force_i2c,
@@ -77,9 +78,7 @@ module_param(force_id, ushort, 0);
MODULE_PARM_DESC(force_id, "Override the detected device ID");
/* modified from kernel/include/traps.c */
-static int REG; /* The register to read/write */
#define DEV 0x07 /* Register: Logical device select */
-static int VAL; /* The value to read/write */
/* logical device numbers for superio_select (below) */
#define W83627HF_LD_FDC 0x00
@@ -109,37 +108,37 @@ static int VAL; /* The value to read/write */
#define W83687THF_VID_DATA 0xF1 /* w83687thf only */
static inline void
-superio_outb(int reg, int val)
+superio_outb(struct w83627hf_sio_data *sio, int reg, int val)
{
- outb(reg, REG);
- outb(val, VAL);
+ outb(reg, sio->sioaddr);
+ outb(val, sio->sioaddr + 1);
}
static inline int
-superio_inb(int reg)
+superio_inb(struct w83627hf_sio_data *sio, int reg)
{
- outb(reg, REG);
- return inb(VAL);
+ outb(reg, sio->sioaddr);
+ return inb(sio->sioaddr + 1);
}
static inline void
-superio_select(int ld)
+superio_select(struct w83627hf_sio_data *sio, int ld)
{
- outb(DEV, REG);
- outb(ld, VAL);
+ outb(DEV, sio->sioaddr);
+ outb(ld, sio->sioaddr + 1);
}
static inline void
-superio_enter(void)
+superio_enter(struct w83627hf_sio_data *sio)
{
- outb(0x87, REG);
- outb(0x87, REG);
+ outb(0x87, sio->sioaddr);
+ outb(0x87, sio->sioaddr);
}
static inline void
-superio_exit(void)
+superio_exit(struct w83627hf_sio_data *sio)
{
- outb(0xAA, REG);
+ outb(0xAA, sio->sioaddr);
}
#define W627_DEVID 0x52
@@ -380,10 +379,6 @@ struct w83627hf_data {
u8 vrm_ovt; /* Register value, 627THF/637HF/687THF only */
};
-struct w83627hf_sio_data {
- enum chips type;
-};
-
static int w83627hf_probe(struct platform_device *pdev);
static int __devexit w83627hf_remove(struct platform_device *pdev);
@@ -1140,11 +1135,8 @@ static int __init w83627hf_find(int sioaddr, unsigned short *addr,
"W83687THF",
};
- REG = sioaddr;
- VAL = sioaddr + 1;
-
- superio_enter();
- val = force_id ? force_id : superio_inb(DEVID);
+ superio_enter(sio_data);
+ val = force_id ? force_id : superio_inb(sio_data, DEVID);
switch (val) {
case W627_DEVID:
sio_data->type = w83627hf;
@@ -1168,16 +1160,9 @@ static int __init w83627hf_find(int sioaddr, unsigned short *addr,
goto exit;
}
- superio_select(W83627HF_LD_HWM);
- force_addr &= WINB_ALIGNMENT;
- if (force_addr) {
- printk(KERN_WARNING DRVNAME ": Forcing address 0x%x\n",
- force_addr);
- superio_outb(WINB_BASE_REG, force_addr >> 8);
- superio_outb(WINB_BASE_REG + 1, force_addr & 0xff);
- }
- val = (superio_inb(WINB_BASE_REG) << 8) |
- superio_inb(WINB_BASE_REG + 1);
+ superio_select(sio_data, W83627HF_LD_HWM);
+ val = (superio_inb(sio_data, WINB_BASE_REG) << 8) |
+ superio_inb(sio_data, WINB_BASE_REG + 1);
*addr = val & WINB_ALIGNMENT;
if (*addr == 0) {
printk(KERN_WARNING DRVNAME ": Base address not set, "
@@ -1185,18 +1170,19 @@ static int __init w83627hf_find(int sioaddr, unsigned short *addr,
goto exit;
}
- val = superio_inb(WINB_ACT_REG);
+ val = superio_inb(sio_data, WINB_ACT_REG);
if (!(val & 0x01)) {
printk(KERN_WARNING DRVNAME ": Enabling HWM logical device\n");
- superio_outb(WINB_ACT_REG, val | 0x01);
+ superio_outb(sio_data, WINB_ACT_REG, val | 0x01);
}
err = 0;
+ sio_data->sioaddr = sioaddr;
pr_info(DRVNAME ": Found %s chip at %#x\n",
names[sio_data->type], *addr);
exit:
- superio_exit();
+ superio_exit(sio_data);
return err;
}
@@ -1511,20 +1497,21 @@ static int w83627hf_read_value(struct w83627hf_data *data, u16 reg)
static int __devinit w83627thf_read_gpio5(struct platform_device *pdev)
{
+ struct w83627hf_sio_data *sio_data = pdev->dev.platform_data;
int res = 0xff, sel;
- superio_enter();
- superio_select(W83627HF_LD_GPIO5);
+ superio_enter(sio_data);
+ superio_select(sio_data, W83627HF_LD_GPIO5);
/* Make sure these GPIO pins are enabled */
- if (!(superio_inb(W83627THF_GPIO5_EN) & (1<<3))) {
+ if (!(superio_inb(sio_data, W83627THF_GPIO5_EN) & (1<<3))) {
dev_dbg(&pdev->dev, "GPIO5 disabled, no VID function\n");
goto exit;
}
/* Make sure the pins are configured for input
There must be at least five (VRM 9), and possibly 6 (VRM 10) */
- sel = superio_inb(W83627THF_GPIO5_IOSR) & 0x3f;
+ sel = superio_inb(sio_data, W83627THF_GPIO5_IOSR) & 0x3f;
if ((sel & 0x1f) != 0x1f) {
dev_dbg(&pdev->dev, "GPIO5 not configured for VID "
"function\n");
@@ -1532,37 +1519,38 @@ static int __devinit w83627thf_read_gpio5(struct platform_device *pdev)
}
dev_info(&pdev->dev, "Reading VID from GPIO5\n");
- res = superio_inb(W83627THF_GPIO5_DR) & sel;
+ res = superio_inb(sio_data, W83627THF_GPIO5_DR) & sel;
exit:
- superio_exit();
+ superio_exit(sio_data);
return res;
}
static int __devinit w83687thf_read_vid(struct platform_device *pdev)
{
+ struct w83627hf_sio_data *sio_data = pdev->dev.platform_data;
int res = 0xff;
- superio_enter();
- superio_select(W83627HF_LD_HWM);
+ superio_enter(sio_data);
+ superio_select(sio_data, W83627HF_LD_HWM);
/* Make sure these GPIO pins are enabled */
- if (!(superio_inb(W83687THF_VID_EN) & (1 << 2))) {
+ if (!(superio_inb(sio_data, W83687THF_VID_EN) & (1 << 2))) {
dev_dbg(&pdev->dev, "VID disabled, no VID function\n");
goto exit;
}
/* Make sure the pins are configured for input */
- if (!(superio_inb(W83687THF_VID_CFG) & (1 << 4))) {
+ if (!(superio_inb(sio_data, W83687THF_VID_CFG) & (1 << 4))) {
dev_dbg(&pdev->dev, "VID configured as output, "
"no VID function\n");
goto exit;
}
- res = superio_inb(W83687THF_VID_DATA) & 0x3f;
+ res = superio_inb(sio_data, W83687THF_VID_DATA) & 0x3f;
exit:
- superio_exit();
+ superio_exit(sio_data);
return res;
}
diff --git a/drivers/hwmon/w83781d.c b/drivers/hwmon/w83781d.c
index d27ed1bac002cd1c35c8c55b41be32253c5a9936..7ab7967da0a0359fe1dca5f90518c927752aedf5 100644
--- a/drivers/hwmon/w83781d.c
+++ b/drivers/hwmon/w83781d.c
@@ -1054,11 +1054,11 @@ static int
w83781d_detect(struct i2c_client *client, int kind,
struct i2c_board_info *info)
{
- int val1 = 0, val2;
+ int val1, val2;
struct w83781d_data *isa = w83781d_data_if_isa();
struct i2c_adapter *adapter = client->adapter;
int address = client->addr;
- const char *client_name = "";
+ const char *client_name;
enum vendor { winbond, asus } vendid;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
@@ -1070,98 +1070,73 @@ w83781d_detect(struct i2c_client *client, int kind,
if (isa)
mutex_lock(&isa->update_lock);
- /* The w8378?d may be stuck in some other bank than bank 0. This may
- make reading other information impossible. Specify a force=... or
- force_*=... parameter, and the Winbond will be reset to the right
- bank. */
- if (kind < 0) {
- if (i2c_smbus_read_byte_data
- (client, W83781D_REG_CONFIG) & 0x80) {
- dev_dbg(&adapter->dev, "Detection of w83781d chip "
- "failed at step 3\n");
- goto err_nodev;
- }
- val1 = i2c_smbus_read_byte_data(client, W83781D_REG_BANK);
- val2 = i2c_smbus_read_byte_data(client, W83781D_REG_CHIPMAN);
- /* Check for Winbond or Asus ID if in bank 0 */
- if ((!(val1 & 0x07)) &&
- (((!(val1 & 0x80)) && (val2 != 0xa3) && (val2 != 0xc3))
- || ((val1 & 0x80) && (val2 != 0x5c) && (val2 != 0x12)))) {
- dev_dbg(&adapter->dev, "Detection of w83781d chip "
- "failed at step 4\n");
+ if (i2c_smbus_read_byte_data(client, W83781D_REG_CONFIG) & 0x80) {
+ dev_dbg(&adapter->dev,
+ "Detection of w83781d chip failed at step 3\n");
+ goto err_nodev;
+ }
+
+ val1 = i2c_smbus_read_byte_data(client, W83781D_REG_BANK);
+ val2 = i2c_smbus_read_byte_data(client, W83781D_REG_CHIPMAN);
+ /* Check for Winbond or Asus ID if in bank 0 */
+ if (!(val1 & 0x07) &&
+ ((!(val1 & 0x80) && val2 != 0xa3 && val2 != 0xc3) ||
+ ( (val1 & 0x80) && val2 != 0x5c && val2 != 0x12))) {
+ dev_dbg(&adapter->dev,
+ "Detection of w83781d chip failed at step 4\n");
+ goto err_nodev;
+ }
+ /* If Winbond SMBus, check address at 0x48.
+ Asus doesn't support, except for as99127f rev.2 */
+ if ((!(val1 & 0x80) && val2 == 0xa3) ||
+ ( (val1 & 0x80) && val2 == 0x5c)) {
+ if (i2c_smbus_read_byte_data(client, W83781D_REG_I2C_ADDR)
+ != address) {
+ dev_dbg(&adapter->dev,
+ "Detection of w83781d chip failed at step 5\n");
goto err_nodev;
}
- /* If Winbond SMBus, check address at 0x48.
- Asus doesn't support, except for as99127f rev.2 */
- if ((!(val1 & 0x80) && (val2 == 0xa3)) ||
- ((val1 & 0x80) && (val2 == 0x5c))) {
- if (i2c_smbus_read_byte_data
- (client, W83781D_REG_I2C_ADDR) != address) {
- dev_dbg(&adapter->dev, "Detection of w83781d "
- "chip failed at step 5\n");
- goto err_nodev;
- }
- }
}
- /* We have either had a force parameter, or we have already detected the
- Winbond. Put it now into bank 0 and Vendor ID High Byte */
+ /* Put it now into bank 0 and Vendor ID High Byte */
i2c_smbus_write_byte_data(client, W83781D_REG_BANK,
(i2c_smbus_read_byte_data(client, W83781D_REG_BANK)
& 0x78) | 0x80);
- /* Determine the chip type. */
- if (kind <= 0) {
- /* get vendor ID */
- val2 = i2c_smbus_read_byte_data(client, W83781D_REG_CHIPMAN);
- if (val2 == 0x5c)
- vendid = winbond;
- else if (val2 == 0x12)
- vendid = asus;
- else {
- dev_dbg(&adapter->dev, "w83781d chip vendor is "
- "neither Winbond nor Asus\n");
- goto err_nodev;
- }
-
- val1 = i2c_smbus_read_byte_data(client, W83781D_REG_WCHIPID);
- if ((val1 == 0x10 || val1 == 0x11) && vendid == winbond)
- kind = w83781d;
- else if (val1 == 0x30 && vendid == winbond)
- kind = w83782d;
- else if (val1 == 0x40 && vendid == winbond && address == 0x2d)
- kind = w83783s;
- else if (val1 == 0x31)
- kind = as99127f;
- else {
- if (kind == 0)
- dev_warn(&adapter->dev, "Ignoring 'force' "
- "parameter for unknown chip at "
- "address 0x%02x\n", address);
- goto err_nodev;
- }
-
- if ((kind == w83781d || kind == w83782d)
- && w83781d_alias_detect(client, val1)) {
- dev_dbg(&adapter->dev, "Device at 0x%02x appears to "
- "be the same as ISA device\n", address);
- goto err_nodev;
- }
+ /* Get the vendor ID */
+ val2 = i2c_smbus_read_byte_data(client, W83781D_REG_CHIPMAN);
+ if (val2 == 0x5c)
+ vendid = winbond;
+ else if (val2 == 0x12)
+ vendid = asus;
+ else {
+ dev_dbg(&adapter->dev,
+ "w83781d chip vendor is neither Winbond nor Asus\n");
+ goto err_nodev;
}
- if (isa)
- mutex_unlock(&isa->update_lock);
-
- if (kind == w83781d) {
+ /* Determine the chip type. */
+ val1 = i2c_smbus_read_byte_data(client, W83781D_REG_WCHIPID);
+ if ((val1 == 0x10 || val1 == 0x11) && vendid == winbond)
client_name = "w83781d";
- } else if (kind == w83782d) {
+ else if (val1 == 0x30 && vendid == winbond)
client_name = "w83782d";
- } else if (kind == w83783s) {
+ else if (val1 == 0x40 && vendid == winbond && address == 0x2d)
client_name = "w83783s";
- } else if (kind == as99127f) {
+ else if (val1 == 0x31)
client_name = "as99127f";
+ else
+ goto err_nodev;
+
+ if (val1 <= 0x30 && w83781d_alias_detect(client, val1)) {
+ dev_dbg(&adapter->dev, "Device at 0x%02x appears to "
+ "be the same as ISA device\n", address);
+ goto err_nodev;
}
+ if (isa)
+ mutex_unlock(&isa->update_lock);
+
strlcpy(info->type, client_name, I2C_NAME_SIZE);
return 0;
diff --git a/drivers/hwmon/w83791d.c b/drivers/hwmon/w83791d.c
index 97851c5ba3a3872caa715e130c3ff12a29c55297..0410bf12c5211cbb9bb27116d3dd343726adba8c 100644
--- a/drivers/hwmon/w83791d.c
+++ b/drivers/hwmon/w83791d.c
@@ -1270,56 +1270,32 @@ static int w83791d_detect(struct i2c_client *client, int kind,
return -ENODEV;
}
- /* The w83791d may be stuck in some other bank than bank 0. This may
- make reading other information impossible. Specify a force=...
- parameter, and the Winbond will be reset to the right bank. */
- if (kind < 0) {
- if (w83791d_read(client, W83791D_REG_CONFIG) & 0x80) {
- return -ENODEV;
- }
- val1 = w83791d_read(client, W83791D_REG_BANK);
- val2 = w83791d_read(client, W83791D_REG_CHIPMAN);
- /* Check for Winbond ID if in bank 0 */
- if (!(val1 & 0x07)) {
- /* yes it is Bank0 */
- if (((!(val1 & 0x80)) && (val2 != 0xa3)) ||
- ((val1 & 0x80) && (val2 != 0x5c))) {
- return -ENODEV;
- }
- }
- /* If Winbond chip, address of chip and W83791D_REG_I2C_ADDR
- should match */
- if (w83791d_read(client, W83791D_REG_I2C_ADDR) != address) {
+ if (w83791d_read(client, W83791D_REG_CONFIG) & 0x80)
+ return -ENODEV;
+
+ val1 = w83791d_read(client, W83791D_REG_BANK);
+ val2 = w83791d_read(client, W83791D_REG_CHIPMAN);
+ /* Check for Winbond ID if in bank 0 */
+ if (!(val1 & 0x07)) {
+ if ((!(val1 & 0x80) && val2 != 0xa3) ||
+ ( (val1 & 0x80) && val2 != 0x5c)) {
return -ENODEV;
}
}
+ /* If Winbond chip, address of chip and W83791D_REG_I2C_ADDR
+ should match */
+ if (w83791d_read(client, W83791D_REG_I2C_ADDR) != address)
+ return -ENODEV;
- /* We either have a force parameter or we have reason to
- believe it is a Winbond chip. Either way, we want bank 0 and
- Vendor ID high byte */
+ /* We want bank 0 and Vendor ID high byte */
val1 = w83791d_read(client, W83791D_REG_BANK) & 0x78;
w83791d_write(client, W83791D_REG_BANK, val1 | 0x80);
/* Verify it is a Winbond w83791d */
- if (kind <= 0) {
- /* get vendor ID */
- val2 = w83791d_read(client, W83791D_REG_CHIPMAN);
- if (val2 != 0x5c) { /* the vendor is NOT Winbond */
- return -ENODEV;
- }
- val1 = w83791d_read(client, W83791D_REG_WCHIPID);
- if (val1 == 0x71) {
- kind = w83791d;
- } else {
- if (kind == 0)
- dev_warn(&adapter->dev,
- "w83791d: Ignoring 'force' parameter "
- "for unknown chip at adapter %d, "
- "address 0x%02x\n",
- i2c_adapter_id(adapter), address);
- return -ENODEV;
- }
- }
+ val1 = w83791d_read(client, W83791D_REG_WCHIPID);
+ val2 = w83791d_read(client, W83791D_REG_CHIPMAN);
+ if (val1 != 0x71 || val2 != 0x5c)
+ return -ENODEV;
strlcpy(info->type, "w83791d", I2C_NAME_SIZE);
diff --git a/drivers/hwmon/w83792d.c b/drivers/hwmon/w83792d.c
index 2be16194ddf3a980674ea91f111c4437a9890e5b..38978851333f6361cbb62d76d4210c6edf5e4662 100644
--- a/drivers/hwmon/w83792d.c
+++ b/drivers/hwmon/w83792d.c
@@ -1273,58 +1273,33 @@ w83792d_detect(struct i2c_client *client, int kind, struct i2c_board_info *info)
return -ENODEV;
}
- /* The w83792d may be stuck in some other bank than bank 0. This may
- make reading other information impossible. Specify a force=... or
- force_*=... parameter, and the Winbond will be reset to the right
- bank. */
- if (kind < 0) {
- if (w83792d_read_value(client, W83792D_REG_CONFIG) & 0x80) {
- return -ENODEV;
- }
- val1 = w83792d_read_value(client, W83792D_REG_BANK);
- val2 = w83792d_read_value(client, W83792D_REG_CHIPMAN);
- /* Check for Winbond ID if in bank 0 */
- if (!(val1 & 0x07)) { /* is Bank0 */
- if (((!(val1 & 0x80)) && (val2 != 0xa3)) ||
- ((val1 & 0x80) && (val2 != 0x5c))) {
- return -ENODEV;
- }
- }
- /* If Winbond chip, address of chip and W83792D_REG_I2C_ADDR
- should match */
- if (w83792d_read_value(client,
- W83792D_REG_I2C_ADDR) != address) {
+ if (w83792d_read_value(client, W83792D_REG_CONFIG) & 0x80)
+ return -ENODEV;
+
+ val1 = w83792d_read_value(client, W83792D_REG_BANK);
+ val2 = w83792d_read_value(client, W83792D_REG_CHIPMAN);
+ /* Check for Winbond ID if in bank 0 */
+ if (!(val1 & 0x07)) { /* is Bank0 */
+ if ((!(val1 & 0x80) && val2 != 0xa3) ||
+ ( (val1 & 0x80) && val2 != 0x5c))
return -ENODEV;
- }
}
+ /* If Winbond chip, address of chip and W83792D_REG_I2C_ADDR
+ should match */
+ if (w83792d_read_value(client, W83792D_REG_I2C_ADDR) != address)
+ return -ENODEV;
- /* We have either had a force parameter, or we have already detected the
- Winbond. Put it now into bank 0 and Vendor ID High Byte */
+ /* Put it now into bank 0 and Vendor ID High Byte */
w83792d_write_value(client,
W83792D_REG_BANK,
(w83792d_read_value(client,
W83792D_REG_BANK) & 0x78) | 0x80);
/* Determine the chip type. */
- if (kind <= 0) {
- /* get vendor ID */
- val2 = w83792d_read_value(client, W83792D_REG_CHIPMAN);
- if (val2 != 0x5c) { /* the vendor is NOT Winbond */
- return -ENODEV;
- }
- val1 = w83792d_read_value(client, W83792D_REG_WCHIPID);
- if (val1 == 0x7a) {
- kind = w83792d;
- } else {
- if (kind == 0)
- dev_warn(&adapter->dev,
- "w83792d: Ignoring 'force' parameter for"
- " unknown chip at adapter %d, address"
- " 0x%02x\n", i2c_adapter_id(adapter),
- address);
- return -ENODEV;
- }
- }
+ val1 = w83792d_read_value(client, W83792D_REG_WCHIPID);
+ val2 = w83792d_read_value(client, W83792D_REG_CHIPMAN);
+ if (val1 != 0x7a || val2 != 0x5c)
+ return -ENODEV;
strlcpy(info->type, "w83792d", I2C_NAME_SIZE);
diff --git a/drivers/hwmon/w83793.c b/drivers/hwmon/w83793.c
index 47dd398f72589ba795abbb11e550e9bb82fd4e00..80a2191bf1274d0b54581113972e669d6be0822d 100644
--- a/drivers/hwmon/w83793.c
+++ b/drivers/hwmon/w83793.c
@@ -1164,7 +1164,7 @@ ERROR_SC_0:
static int w83793_detect(struct i2c_client *client, int kind,
struct i2c_board_info *info)
{
- u8 tmp, bank;
+ u8 tmp, bank, chip_id;
struct i2c_adapter *adapter = client->adapter;
unsigned short address = client->addr;
@@ -1174,44 +1174,27 @@ static int w83793_detect(struct i2c_client *client, int kind,
bank = i2c_smbus_read_byte_data(client, W83793_REG_BANKSEL);
- if (kind < 0) {
- tmp = bank & 0x80 ? 0x5c : 0xa3;
- /* Check Winbond vendor ID */
- if (tmp != i2c_smbus_read_byte_data(client,
- W83793_REG_VENDORID)) {
- pr_debug("w83793: Detection failed at check "
- "vendor id\n");
- return -ENODEV;
- }
-
- /* If Winbond chip, address of chip and W83793_REG_I2C_ADDR
- should match */
- if ((bank & 0x07) == 0
- && i2c_smbus_read_byte_data(client, W83793_REG_I2C_ADDR) !=
- (address << 1)) {
- pr_debug("w83793: Detection failed at check "
- "i2c addr\n");
- return -ENODEV;
- }
-
+ tmp = bank & 0x80 ? 0x5c : 0xa3;
+ /* Check Winbond vendor ID */
+ if (tmp != i2c_smbus_read_byte_data(client, W83793_REG_VENDORID)) {
+ pr_debug("w83793: Detection failed at check vendor id\n");
+ return -ENODEV;
}
- /* We have either had a force parameter, or we have already detected the
- Winbond. Determine the chip type now */
-
- if (kind <= 0) {
- if (0x7b == i2c_smbus_read_byte_data(client,
- W83793_REG_CHIPID)) {
- kind = w83793;
- } else {
- if (kind == 0)
- dev_warn(&adapter->dev, "w83793: Ignoring "
- "'force' parameter for unknown chip "
- "at address 0x%02x\n", address);
- return -ENODEV;
- }
+ /* If Winbond chip, address of chip and W83793_REG_I2C_ADDR
+ should match */
+ if ((bank & 0x07) == 0
+ && i2c_smbus_read_byte_data(client, W83793_REG_I2C_ADDR) !=
+ (address << 1)) {
+ pr_debug("w83793: Detection failed at check i2c addr\n");
+ return -ENODEV;
}
+ /* Determine the chip type now */
+ chip_id = i2c_smbus_read_byte_data(client, W83793_REG_CHIPID);
+ if (chip_id != 0x7b)
+ return -ENODEV;
+
strlcpy(info->type, "w83793", I2C_NAME_SIZE);
return 0;
diff --git a/drivers/hwmon/w83l785ts.c b/drivers/hwmon/w83l785ts.c
index ea295b9fc4f48fc91b84d3c1f24ce013b7360d68..9b6c4c10fba75feaca0f8ca872619ad17fb6be7c 100644
--- a/drivers/hwmon/w83l785ts.c
+++ b/drivers/hwmon/w83l785ts.c
@@ -1,7 +1,7 @@
/*
* w83l785ts.c - Part of lm_sensors, Linux kernel modules for hardware
* monitoring
- * Copyright (C) 2003-2004 Jean Delvare <khali@linux-fr.org>
+ * Copyright (C) 2003-2009 Jean Delvare <khali@linux-fr.org>
*
* Inspired from the lm83 driver. The W83L785TS-S is a sensor chip made
* by Winbond. It reports a single external temperature with a 1 deg
@@ -146,60 +146,36 @@ static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO, show_temp, NULL, 1);
*/
/* Return 0 if detection is successful, -ENODEV otherwise */
-static int w83l785ts_detect(struct i2c_client *new_client, int kind,
+static int w83l785ts_detect(struct i2c_client *client, int kind,
struct i2c_board_info *info)
{
- struct i2c_adapter *adapter = new_client->adapter;
+ struct i2c_adapter *adapter = client->adapter;
+ u16 man_id;
+ u8 chip_id;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
return -ENODEV;
- /*
- * Now we do the remaining detection. A negative kind means that
- * the driver was loaded with no force parameter (default), so we
- * must both detect and identify the chip (actually there is only
- * one possible kind of chip for now, W83L785TS-S). A zero kind means
- * that the driver was loaded with the force parameter, the detection
- * step shall be skipped. A positive kind means that the driver
- * was loaded with the force parameter and a given kind of chip is
- * requested, so both the detection and the identification steps
- * are skipped.
- */
- if (kind < 0) { /* detection */
- if (((w83l785ts_read_value(new_client,
- W83L785TS_REG_CONFIG, 0) & 0x80) != 0x00)
- || ((w83l785ts_read_value(new_client,
- W83L785TS_REG_TYPE, 0) & 0xFC) != 0x00)) {
- dev_dbg(&adapter->dev,
- "W83L785TS-S detection failed at 0x%02x.\n",
- new_client->addr);
- return -ENODEV;
- }
+ /* detection */
+ if ((w83l785ts_read_value(client, W83L785TS_REG_CONFIG, 0) & 0x80)
+ || (w83l785ts_read_value(client, W83L785TS_REG_TYPE, 0) & 0xFC)) {
+ dev_dbg(&adapter->dev,
+ "W83L785TS-S detection failed at 0x%02x\n",
+ client->addr);
+ return -ENODEV;
}
- if (kind <= 0) { /* identification */
- u16 man_id;
- u8 chip_id;
-
- man_id = (w83l785ts_read_value(new_client,
- W83L785TS_REG_MAN_ID1, 0) << 8) +
- w83l785ts_read_value(new_client,
- W83L785TS_REG_MAN_ID2, 0);
- chip_id = w83l785ts_read_value(new_client,
- W83L785TS_REG_CHIP_ID, 0);
-
- if (man_id == 0x5CA3) { /* Winbond */
- if (chip_id == 0x70) { /* W83L785TS-S */
- kind = w83l785ts;
- }
- }
-
- if (kind <= 0) { /* identification failed */
- dev_info(&adapter->dev,
- "Unsupported chip (man_id=0x%04X, "
- "chip_id=0x%02X).\n", man_id, chip_id);
- return -ENODEV;
- }
+ /* Identification */
+ man_id = (w83l785ts_read_value(client, W83L785TS_REG_MAN_ID1, 0) << 8)
+ + w83l785ts_read_value(client, W83L785TS_REG_MAN_ID2, 0);
+ chip_id = w83l785ts_read_value(client, W83L785TS_REG_CHIP_ID, 0);
+
+ if (man_id != 0x5CA3 /* Winbond */
+ || chip_id != 0x70) { /* W83L785TS-S */
+ dev_dbg(&adapter->dev,
+ "Unsupported chip (man_id=0x%04X, chip_id=0x%02X)\n",
+ man_id, chip_id);
+ return -ENODEV;
}
strlcpy(info->type, "w83l785ts", I2C_NAME_SIZE);
diff --git a/drivers/hwmon/w83l786ng.c b/drivers/hwmon/w83l786ng.c
index badca769f350dde08a4b1f906fa7826393f5812a..27da7d2b15fb6fb82bbd0b60d63637d2dfb55367 100644
--- a/drivers/hwmon/w83l786ng.c
+++ b/drivers/hwmon/w83l786ng.c
@@ -590,53 +590,31 @@ w83l786ng_detect(struct i2c_client *client, int kind,
struct i2c_board_info *info)
{
struct i2c_adapter *adapter = client->adapter;
+ u16 man_id;
+ u8 chip_id;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
return -ENODEV;
}
- /*
- * Now we do the remaining detection. A negative kind means that
- * the driver was loaded with no force parameter (default), so we
- * must both detect and identify the chip (actually there is only
- * one possible kind of chip for now, W83L786NG). A zero kind means
- * that the driver was loaded with the force parameter, the detection
- * step shall be skipped. A positive kind means that the driver
- * was loaded with the force parameter and a given kind of chip is
- * requested, so both the detection and the identification steps
- * are skipped.
- */
- if (kind < 0) { /* detection */
- if (((w83l786ng_read_value(client,
- W83L786NG_REG_CONFIG) & 0x80) != 0x00)) {
- dev_dbg(&adapter->dev,
- "W83L786NG detection failed at 0x%02x.\n",
- client->addr);
- return -ENODEV;
- }
+ /* Detection */
+ if ((w83l786ng_read_value(client, W83L786NG_REG_CONFIG) & 0x80)) {
+ dev_dbg(&adapter->dev, "W83L786NG detection failed at 0x%02x\n",
+ client->addr);
+ return -ENODEV;
}
- if (kind <= 0) { /* identification */
- u16 man_id;
- u8 chip_id;
-
- man_id = (w83l786ng_read_value(client,
- W83L786NG_REG_MAN_ID1) << 8) +
- w83l786ng_read_value(client, W83L786NG_REG_MAN_ID2);
- chip_id = w83l786ng_read_value(client, W83L786NG_REG_CHIP_ID);
-
- if (man_id == 0x5CA3) { /* Winbond */
- if (chip_id == 0x80) { /* W83L786NG */
- kind = w83l786ng;
- }
- }
+ /* Identification */
+ man_id = (w83l786ng_read_value(client, W83L786NG_REG_MAN_ID1) << 8) +
+ w83l786ng_read_value(client, W83L786NG_REG_MAN_ID2);
+ chip_id = w83l786ng_read_value(client, W83L786NG_REG_CHIP_ID);
- if (kind <= 0) { /* identification failed */
- dev_info(&adapter->dev,
- "Unsupported chip (man_id=0x%04X, "
- "chip_id=0x%02X).\n", man_id, chip_id);
- return -ENODEV;
- }
+ if (man_id != 0x5CA3 || /* Winbond */
+ chip_id != 0x80) { /* W83L786NG */
+ dev_dbg(&adapter->dev,
+ "Unsupported chip (man_id=0x%04X, chip_id=0x%02X)\n",
+ man_id, chip_id);
+ return -ENODEV;
}
strlcpy(info->type, "w83l786ng", I2C_NAME_SIZE);