Commit f657f82c authored by Steffen Trumtrar's avatar Steffen Trumtrar Committed by Herbert Xu
Browse files

crypto: caam - fix non-64-bit write/read access

The patch

	crypto: caam - Add definition of rd/wr_reg64 for little endian platform

added support for little endian platforms to the CAAM driver. Namely a
write and read function for 64 bit registers.
The only user of this functions is the Job Ring driver (drivers/crypto/caam/jr.c).
It uses the functions to set the DMA addresses for the input/output rings.
However, at least in the default configuration, the least significant 32 bits are
always in the base+0x0004 address; independent of the endianness of the bytes itself.
That means the addresses do not change with the system endianness.

DMA addresses are only 32 bits wide on non-64-bit systems, writing the upper 32 bits
of this value to the register for the least significant bits results in the DMA address
being set to 0.

Fix this by always writing the registers in the same way.
Suggested-by: default avatarRussell King <>
Signed-off-by: default avatarSteffen Trumtrar <>
Signed-off-by: default avatarHerbert Xu <>
parent 946cc463
......@@ -83,35 +83,35 @@
* The only users of these wr/rd_reg64 functions is the Job Ring (JR).
* The DMA address registers in the JR are a pair of 32-bit registers.
* The layout is:
* base + 0x0000 : most-significant 32 bits
* base + 0x0004 : least-significant 32 bits
* The 32-bit version of this core therefore has to write to base + 0x0004
* to set the 32-bit wide DMA address. This seems to be independent of the
* endianness of the written/read data.
#ifndef CONFIG_64BIT
#ifdef __BIG_ENDIAN
static inline void wr_reg64(u64 __iomem *reg, u64 data)
wr_reg32((u32 __iomem *)reg, (data & 0xffffffff00000000ull) >> 32);
wr_reg32((u32 __iomem *)reg + 1, data & 0x00000000ffffffffull);
#define REG64_MS32(reg) ((u32 __iomem *)(reg))
#define REG64_LS32(reg) ((u32 __iomem *)(reg) + 1)
static inline u64 rd_reg64(u64 __iomem *reg)
return (((u64)rd_reg32((u32 __iomem *)reg)) << 32) |
((u64)rd_reg32((u32 __iomem *)reg + 1));
static inline void wr_reg64(u64 __iomem *reg, u64 data)
wr_reg32((u32 __iomem *)reg + 1, (data & 0xffffffff00000000ull) >> 32);
wr_reg32((u32 __iomem *)reg, data & 0x00000000ffffffffull);
wr_reg32(REG64_MS32(reg), data >> 32);
wr_reg32(REG64_LS32(reg), data);
static inline u64 rd_reg64(u64 __iomem *reg)
return (((u64)rd_reg32((u32 __iomem *)reg + 1)) << 32) |
((u64)rd_reg32((u32 __iomem *)reg));
return ((u64)rd_reg32(REG64_MS32(reg)) << 32 |
* jr_outentry
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment