Commit f4ba1cf8 authored by Linus Torvalds's avatar Linus Torvalds

Merge tag 'sound-4.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
 "We see various small fixes, but nothing looks too scary, all are small
  gentle bug fixes:

   - Most of changes are for ASoC codecs: Realtek, SGTL5000, TAS2552,
     TLV320, WM8962

   - A couple of dwc and imx-ssi fixes

   - Usual oneliner HD-audio quirks

   - An old emux synth code fix"

* tag 'sound-4.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  MAINTAINERS: Remove wm97xx entry
  ASoC: tas2552: fix dBscale-min declaration
  ALSA: synth: Fix conflicting OSS device registration on AWE32
  ALSA: hda - Disable power_save_node for IDT 92HD73xx chips
  ALSA: hda - Apply SPDIF pin ctl to MacBookPro 12,1
  ALSA: hda: Add dock support for ThinkPad T550
  ASoC: dwc: fix dma stop transferring issue
  ASoC: dwc: correct irq clear method
  ASoC: tlv320aic3x: Prevent writing reserved registers on tlv320aic3104 CODECs
  ASoC: rt5645: Correct the naming and setting of ADC Boost Volume Control
  ASoC: sgtl5000: fix wrong register MIC_BIAS_VOLTAGE setup on probe
  ASoC: wm8962: balance pm_runtime_enable
  ASoC: imx-ssi: Fix DAI hardware signal inversions
  ASoC: sgtl5000: fix error message output for MicBias voltage
  ASoC: db1200: Fix DAI link format for db1300 and db1550
parents fe621fde 601d6295
......@@ -11378,15 +11378,6 @@ W: http://oops.ghostprotocols.net:81/blog
S: Maintained
F: drivers/net/wireless/wl3501*
WM97XX TOUCHSCREEN DRIVERS
M: Mark Brown <broonie@kernel.org>
M: Liam Girdwood <lrg@slimlogic.co.uk>
L: linux-input@vger.kernel.org
W: https://github.com/CirrusLogic/linux-drivers/wiki
S: Supported
F: drivers/input/touchscreen/*wm97*
F: include/linux/wm97xx.h
WOLFSON MICROELECTRONICS DRIVERS
L: patches@opensource.wolfsonmicro.com
T: git https://github.com/CirrusLogic/linux-drivers.git
......
......@@ -633,6 +633,7 @@ static const struct snd_pci_quirk cs4208_mac_fixup_tbl[] = {
SND_PCI_QUIRK(0x106b, 0x5e00, "MacBookPro 11,2", CS4208_MBP11),
SND_PCI_QUIRK(0x106b, 0x7100, "MacBookAir 6,1", CS4208_MBA6),
SND_PCI_QUIRK(0x106b, 0x7200, "MacBookAir 6,2", CS4208_MBA6),
SND_PCI_QUIRK(0x106b, 0x7b00, "MacBookPro 12,1", CS4208_MBP11),
{} /* terminator */
};
......
......@@ -5306,6 +5306,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = {
SND_PCI_QUIRK(0x17aa, 0x2212, "Thinkpad T440", ALC292_FIXUP_TPT440_DOCK),
SND_PCI_QUIRK(0x17aa, 0x2214, "Thinkpad X240", ALC292_FIXUP_TPT440_DOCK),
SND_PCI_QUIRK(0x17aa, 0x2215, "Thinkpad", ALC269_FIXUP_LIMIT_INT_MIC_BOOST),
SND_PCI_QUIRK(0x17aa, 0x2223, "ThinkPad T550", ALC292_FIXUP_TPT440_DOCK),
SND_PCI_QUIRK(0x17aa, 0x2226, "ThinkPad X250", ALC292_FIXUP_TPT440_DOCK),
SND_PCI_QUIRK(0x17aa, 0x3977, "IdeaPad S210", ALC283_FIXUP_INT_MIC),
SND_PCI_QUIRK(0x17aa, 0x3978, "IdeaPad Y410P", ALC269_FIXUP_NO_SHUTUP),
......
......@@ -4520,7 +4520,11 @@ static int patch_stac92hd73xx(struct hda_codec *codec)
return err;
spec = codec->spec;
codec->power_save_node = 1;
/* enable power_save_node only for new 92HD89xx chips, as it causes
* click noises on old 92HD73xx chips.
*/
if ((codec->core.vendor_id & 0xfffffff0) != 0x111d7670)
codec->power_save_node = 1;
spec->linear_tone_beep = 0;
spec->gen.mixer_nid = 0x1d;
spec->have_spdif_mux = 1;
......
......@@ -129,6 +129,8 @@ static struct snd_soc_dai_link db1300_i2s_dai = {
.cpu_dai_name = "au1xpsc_i2s.2",
.platform_name = "au1xpsc-pcm.2",
.codec_name = "wm8731.0-001b",
.dai_fmt = SND_SOC_DAIFMT_LEFT_J | SND_SOC_DAIFMT_NB_NF |
SND_SOC_DAIFMT_CBM_CFM,
.ops = &db1200_i2s_wm8731_ops,
};
......@@ -146,6 +148,8 @@ static struct snd_soc_dai_link db1550_i2s_dai = {
.cpu_dai_name = "au1xpsc_i2s.3",
.platform_name = "au1xpsc-pcm.3",
.codec_name = "wm8731.0-001b",
.dai_fmt = SND_SOC_DAIFMT_LEFT_J | SND_SOC_DAIFMT_NB_NF |
SND_SOC_DAIFMT_CBM_CFM,
.ops = &db1200_i2s_wm8731_ops,
};
......
......@@ -519,11 +519,11 @@ static const struct snd_kcontrol_new rt5645_snd_controls[] = {
RT5645_L_VOL_SFT + 1, RT5645_R_VOL_SFT + 1, 63, 0, adc_vol_tlv),
/* ADC Boost Volume Control */
SOC_DOUBLE_TLV("STO1 ADC Boost Gain", RT5645_ADC_BST_VOL1,
SOC_DOUBLE_TLV("ADC Boost Capture Volume", RT5645_ADC_BST_VOL1,
RT5645_STO1_ADC_L_BST_SFT, RT5645_STO1_ADC_R_BST_SFT, 3, 0,
adc_bst_tlv),
SOC_DOUBLE_TLV("STO2 ADC Boost Gain", RT5645_ADC_BST_VOL1,
RT5645_STO2_ADC_L_BST_SFT, RT5645_STO2_ADC_R_BST_SFT, 3, 0,
SOC_DOUBLE_TLV("Mono ADC Boost Capture Volume", RT5645_ADC_BST_VOL2,
RT5645_MONO_ADC_L_BST_SFT, RT5645_MONO_ADC_R_BST_SFT, 3, 0,
adc_bst_tlv),
/* I2S2 function select */
......
......@@ -39,8 +39,8 @@
#define RT5645_STO1_ADC_DIG_VOL 0x1c
#define RT5645_MONO_ADC_DIG_VOL 0x1d
#define RT5645_ADC_BST_VOL1 0x1e
/* Mixer - D-D */
#define RT5645_ADC_BST_VOL2 0x20
/* Mixer - D-D */
#define RT5645_STO1_ADC_MIXER 0x27
#define RT5645_MONO_ADC_MIXER 0x28
#define RT5645_AD_DA_MIXER 0x29
......@@ -315,12 +315,14 @@
#define RT5645_STO1_ADC_R_BST_SFT 12
#define RT5645_STO1_ADC_COMP_MASK (0x3 << 10)
#define RT5645_STO1_ADC_COMP_SFT 10
#define RT5645_STO2_ADC_L_BST_MASK (0x3 << 8)
#define RT5645_STO2_ADC_L_BST_SFT 8
#define RT5645_STO2_ADC_R_BST_MASK (0x3 << 6)
#define RT5645_STO2_ADC_R_BST_SFT 6
#define RT5645_STO2_ADC_COMP_MASK (0x3 << 4)
#define RT5645_STO2_ADC_COMP_SFT 4
/* ADC Boost Volume Control (0x20) */
#define RT5645_MONO_ADC_L_BST_MASK (0x3 << 14)
#define RT5645_MONO_ADC_L_BST_SFT 14
#define RT5645_MONO_ADC_R_BST_MASK (0x3 << 12)
#define RT5645_MONO_ADC_R_BST_SFT 12
#define RT5645_MONO_ADC_COMP_MASK (0x3 << 10)
#define RT5645_MONO_ADC_COMP_SFT 10
/* Stereo2 ADC Mixer Control (0x26) */
#define RT5645_STO2_ADC_SRC_MASK (0x1 << 15)
......
......@@ -1376,8 +1376,8 @@ static int sgtl5000_probe(struct snd_soc_codec *codec)
sgtl5000->micbias_resistor << SGTL5000_BIAS_R_SHIFT);
snd_soc_update_bits(codec, SGTL5000_CHIP_MIC_CTRL,
SGTL5000_BIAS_R_MASK,
sgtl5000->micbias_voltage << SGTL5000_BIAS_R_SHIFT);
SGTL5000_BIAS_VOLT_MASK,
sgtl5000->micbias_voltage << SGTL5000_BIAS_VOLT_SHIFT);
/*
* disable DAP
* TODO:
......@@ -1549,7 +1549,7 @@ static int sgtl5000_i2c_probe(struct i2c_client *client,
else {
sgtl5000->micbias_voltage = 0;
dev_err(&client->dev,
"Unsuitable MicBias resistor\n");
"Unsuitable MicBias voltage\n");
}
} else {
sgtl5000->micbias_voltage = 0;
......
......@@ -549,7 +549,7 @@ static struct snd_soc_dai_driver tas2552_dai[] = {
/*
* DAC digital volumes. From -7 to 24 dB in 1 dB steps
*/
static DECLARE_TLV_DB_SCALE(dac_tlv, -7, 100, 0);
static DECLARE_TLV_DB_SCALE(dac_tlv, -700, 100, 0);
static const char * const tas2552_din_source_select[] = {
"Muted",
......
......@@ -1509,14 +1509,17 @@ static int aic3x_init(struct snd_soc_codec *codec)
snd_soc_write(codec, PGAL_2_LLOPM_VOL, DEFAULT_VOL);
snd_soc_write(codec, PGAR_2_RLOPM_VOL, DEFAULT_VOL);
/* Line2 to HP Bypass default volume, disconnect from Output Mixer */
snd_soc_write(codec, LINE2L_2_HPLOUT_VOL, DEFAULT_VOL);
snd_soc_write(codec, LINE2R_2_HPROUT_VOL, DEFAULT_VOL);
snd_soc_write(codec, LINE2L_2_HPLCOM_VOL, DEFAULT_VOL);
snd_soc_write(codec, LINE2R_2_HPRCOM_VOL, DEFAULT_VOL);
/* Line2 Line Out default volume, disconnect from Output Mixer */
snd_soc_write(codec, LINE2L_2_LLOPM_VOL, DEFAULT_VOL);
snd_soc_write(codec, LINE2R_2_RLOPM_VOL, DEFAULT_VOL);
/* On tlv320aic3104, these registers are reserved and must not be written */
if (aic3x->model != AIC3X_MODEL_3104) {
/* Line2 to HP Bypass default volume, disconnect from Output Mixer */
snd_soc_write(codec, LINE2L_2_HPLOUT_VOL, DEFAULT_VOL);
snd_soc_write(codec, LINE2R_2_HPROUT_VOL, DEFAULT_VOL);
snd_soc_write(codec, LINE2L_2_HPLCOM_VOL, DEFAULT_VOL);
snd_soc_write(codec, LINE2R_2_HPRCOM_VOL, DEFAULT_VOL);
/* Line2 Line Out default volume, disconnect from Output Mixer */
snd_soc_write(codec, LINE2L_2_LLOPM_VOL, DEFAULT_VOL);
snd_soc_write(codec, LINE2R_2_RLOPM_VOL, DEFAULT_VOL);
}
switch (aic3x->model) {
case AIC3X_MODEL_3X:
......
......@@ -3760,7 +3760,7 @@ static int wm8962_i2c_probe(struct i2c_client *i2c,
ret = snd_soc_register_codec(&i2c->dev,
&soc_codec_dev_wm8962, &wm8962_dai, 1);
if (ret < 0)
goto err_enable;
goto err_pm_runtime;
regcache_cache_only(wm8962->regmap, true);
......@@ -3769,6 +3769,8 @@ static int wm8962_i2c_probe(struct i2c_client *i2c,
return 0;
err_pm_runtime:
pm_runtime_disable(&i2c->dev);
err_enable:
regulator_bulk_disable(ARRAY_SIZE(wm8962->supplies), wm8962->supplies);
err:
......@@ -3778,6 +3780,7 @@ err:
static int wm8962_i2c_remove(struct i2c_client *client)
{
snd_soc_unregister_codec(&client->dev);
pm_runtime_disable(&client->dev);
return 0;
}
......
......@@ -131,23 +131,32 @@ static inline void i2s_clear_irqs(struct dw_i2s_dev *dev, u32 stream)
if (stream == SNDRV_PCM_STREAM_PLAYBACK) {
for (i = 0; i < 4; i++)
i2s_write_reg(dev->i2s_base, TOR(i), 0);
i2s_read_reg(dev->i2s_base, TOR(i));
} else {
for (i = 0; i < 4; i++)
i2s_write_reg(dev->i2s_base, ROR(i), 0);
i2s_read_reg(dev->i2s_base, ROR(i));
}
}
static void i2s_start(struct dw_i2s_dev *dev,
struct snd_pcm_substream *substream)
{
u32 i, irq;
i2s_write_reg(dev->i2s_base, IER, 1);
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
for (i = 0; i < 4; i++) {
irq = i2s_read_reg(dev->i2s_base, IMR(i));
i2s_write_reg(dev->i2s_base, IMR(i), irq & ~0x30);
}
i2s_write_reg(dev->i2s_base, ITER, 1);
else
} else {
for (i = 0; i < 4; i++) {
irq = i2s_read_reg(dev->i2s_base, IMR(i));
i2s_write_reg(dev->i2s_base, IMR(i), irq & ~0x03);
}
i2s_write_reg(dev->i2s_base, IRER, 1);
}
i2s_write_reg(dev->i2s_base, CER, 1);
}
......
......@@ -95,7 +95,8 @@ static int imx_ssi_set_dai_fmt(struct snd_soc_dai *cpu_dai, unsigned int fmt)
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
case SND_SOC_DAIFMT_I2S:
/* data on rising edge of bclk, frame low 1clk before data */
strcr |= SSI_STCR_TFSI | SSI_STCR_TEFS | SSI_STCR_TXBIT0;
strcr |= SSI_STCR_TXBIT0 | SSI_STCR_TSCKP | SSI_STCR_TFSI |
SSI_STCR_TEFS;
scr |= SSI_SCR_NET;
if (ssi->flags & IMX_SSI_USE_I2S_SLAVE) {
scr &= ~SSI_I2S_MODE_MASK;
......@@ -104,33 +105,31 @@ static int imx_ssi_set_dai_fmt(struct snd_soc_dai *cpu_dai, unsigned int fmt)
break;
case SND_SOC_DAIFMT_LEFT_J:
/* data on rising edge of bclk, frame high with data */
strcr |= SSI_STCR_TXBIT0;
strcr |= SSI_STCR_TXBIT0 | SSI_STCR_TSCKP;
break;
case SND_SOC_DAIFMT_DSP_B:
/* data on rising edge of bclk, frame high with data */
strcr |= SSI_STCR_TFSL | SSI_STCR_TXBIT0;
strcr |= SSI_STCR_TXBIT0 | SSI_STCR_TSCKP | SSI_STCR_TFSL;
break;
case SND_SOC_DAIFMT_DSP_A:
/* data on rising edge of bclk, frame high 1clk before data */
strcr |= SSI_STCR_TFSL | SSI_STCR_TXBIT0 | SSI_STCR_TEFS;
strcr |= SSI_STCR_TXBIT0 | SSI_STCR_TSCKP | SSI_STCR_TFSL |
SSI_STCR_TEFS;
break;
}
/* DAI clock inversion */
switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
case SND_SOC_DAIFMT_IB_IF:
strcr |= SSI_STCR_TFSI;
strcr &= ~SSI_STCR_TSCKP;
strcr ^= SSI_STCR_TSCKP | SSI_STCR_TFSI;
break;
case SND_SOC_DAIFMT_IB_NF:
strcr &= ~(SSI_STCR_TSCKP | SSI_STCR_TFSI);
strcr ^= SSI_STCR_TSCKP;
break;
case SND_SOC_DAIFMT_NB_IF:
strcr |= SSI_STCR_TFSI | SSI_STCR_TSCKP;
strcr ^= SSI_STCR_TFSI;
break;
case SND_SOC_DAIFMT_NB_NF:
strcr &= ~SSI_STCR_TFSI;
strcr |= SSI_STCR_TSCKP;
break;
}
......
......@@ -69,7 +69,8 @@ snd_emux_init_seq_oss(struct snd_emux *emu)
struct snd_seq_oss_reg *arg;
struct snd_seq_device *dev;
if (snd_seq_device_new(emu->card, 0, SNDRV_SEQ_DEV_ID_OSS,
/* using device#1 here for avoiding conflicts with OPL3 */
if (snd_seq_device_new(emu->card, 1, SNDRV_SEQ_DEV_ID_OSS,
sizeof(struct snd_seq_oss_reg), &dev) < 0)
return;
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment