Commit f3d73f36 authored by Sukumar Ghorai's avatar Sukumar Ghorai Committed by Tony Lindgren
Browse files

omap3: nand: ecc layout select from board file



This patch makes it possible to select sw or hw (different layout options)
ecc scheme supported by omap nand driver.
Signed-off-by: default avatarVimal Singh <vimalsingh@ti.com>
Signed-off-by: default avatarSukumar Ghorai <s-ghorai@ti.com>
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
parent 317379a9
......@@ -148,6 +148,7 @@ __init board_nand_init(struct mtd_partition *nand_parts,
board_nand_data.nr_parts = nr_parts;
board_nand_data.devsize = nand_type;
board_nand_data.ecc_opt = OMAP_ECC_HAMMING_CODE_DEFAULT;
board_nand_data.gpmc_irq = OMAP_GPMC_IRQ_BASE + cs;
gpmc_nand_init(&board_nand_data);
}
......
......@@ -86,6 +86,12 @@
#define PREFETCH_FIFOTHRESHOLD_MAX 0x40
#define PREFETCH_FIFOTHRESHOLD(val) ((val) << 8)
enum omap_ecc {
/* 1-bit ecc: stored at end of spare area */
OMAP_ECC_HAMMING_CODE_DEFAULT = 0, /* Default, s/w method */
OMAP_ECC_HAMMING_CODE_HW, /* gpmc to detect the error */
};
/*
* Note that all values in this struct are in nanoseconds except sync_clk
* (which is in picoseconds), while the register values are in gpmc_fck cycles.
......
......@@ -8,6 +8,7 @@
* published by the Free Software Foundation.
*/
#include <plat/gpmc.h>
#include <linux/mtd/partitions.h>
enum nand_io {
......@@ -31,6 +32,7 @@ struct omap_nand_platform_data {
enum nand_io xfer_type;
unsigned long phys_base;
int devsize;
enum omap_ecc ecc_opt;
};
/* minimum size for IO mapping */
......
......@@ -626,8 +626,6 @@ static int omap_verify_buf(struct mtd_info *mtd, const u_char * buf, int len)
return 0;
}
#ifdef CONFIG_MTD_NAND_OMAP_HWECC
/**
* gen_true_ecc - This function will generate true ECC value
* @ecc_buf: buffer to store ecc code
......@@ -847,8 +845,6 @@ static void omap_enable_hwecc(struct mtd_info *mtd, int mode)
gpmc_enable_hwecc(info->gpmc_cs, mode, dev_width, info->nand.ecc.size);
}
#endif
/**
* omap_wait - wait until the command is done
* @mtd: MTD device structure
......@@ -1038,17 +1034,17 @@ static int __devinit omap_nand_probe(struct platform_device *pdev)
info->nand.verify_buf = omap_verify_buf;
#ifdef CONFIG_MTD_NAND_OMAP_HWECC
info->nand.ecc.bytes = 3;
info->nand.ecc.size = 512;
info->nand.ecc.calculate = omap_calculate_ecc;
info->nand.ecc.hwctl = omap_enable_hwecc;
info->nand.ecc.correct = omap_correct_data;
info->nand.ecc.mode = NAND_ECC_HW;
#else
info->nand.ecc.mode = NAND_ECC_SOFT;
#endif
/* selsect the ecc type */
if (pdata->ecc_opt == OMAP_ECC_HAMMING_CODE_DEFAULT)
info->nand.ecc.mode = NAND_ECC_SOFT;
else if (pdata->ecc_opt == OMAP_ECC_HAMMING_CODE_HW) {
info->nand.ecc.bytes = 3;
info->nand.ecc.size = 512;
info->nand.ecc.calculate = omap_calculate_ecc;
info->nand.ecc.hwctl = omap_enable_hwecc;
info->nand.ecc.correct = omap_correct_data;
info->nand.ecc.mode = NAND_ECC_HW;
}
/* DIP switches on some boards change between 8 and 16 bit
* bus widths for flash. Try the other width if the first try fails.
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment