Commit e853534e authored by Horst Schirmeier's avatar Horst Schirmeier Committed by Russell King
Browse files

[SERIAL] typo: buad -> baud



Replacing mistyped "buad" with "baud" where applicable.
Signed-off-by: default avatarHorst Schirmeier <horst@schirmeier.com>
Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
parent 672c6108
......@@ -86,7 +86,7 @@ void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop)
/* disable interrupts */
UART16550_WRITE(OFS_INTR_ENABLE, 0);
/* set up buad rate */
/* set up baud rate */
{
uint32 divisor;
......
......@@ -86,7 +86,7 @@ void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop)
/* disable interrupts */
UART16550_WRITE(OFS_INTR_ENABLE, 0);
/* set up buad rate */
/* set up baud rate */
{
uint32 divisor;
......
......@@ -149,7 +149,7 @@ void serial_set(int channel, unsigned long baud)
#else
/*
* Note: Set baud rate, hardcoded here for rate of 115200
* since became unsure of above "buad rate" algorithm (??).
* since became unsure of above "baud rate" algorithm (??).
*/
outreg(channel, LCR, 0x83);
outreg(channel, DLM, 0x00); // See note above
......
......@@ -73,7 +73,7 @@ void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop)
/* disable interrupts */
UART16550_WRITE(OFS_INTR_ENABLE, 0);
/* set up buad rate */
/* set up baud rate */
{
uint32 divisor;
......
......@@ -72,7 +72,7 @@ void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop)
/* disable interrupts */
UART16550_WRITE(OFS_INTR_ENABLE, 0);
/* set up buad rate */
/* set up baud rate */
{
uint32 divisor;
......
......@@ -73,7 +73,7 @@ void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop)
/* disable interrupts */
UART16550_WRITE(OFS_INTR_ENABLE, 0);
/* set up buad rate */
/* set up baud rate */
{
uint32 divisor;
......
......@@ -73,7 +73,7 @@ void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop)
/* disable interrupts */
UART16550_WRITE(OFS_INTR_ENABLE, 0);
/* set up buad rate */
/* set up baud rate */
{
uint32 divisor;
......
......@@ -73,7 +73,7 @@ void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop)
/* disable interrupts */
UART16550_WRITE(OFS_INTR_ENABLE, 0);
/* set up buad rate */
/* set up baud rate */
{
uint32 divisor;
......
......@@ -28,7 +28,7 @@
#define UARTDR 0x00 /* Tx/Rx data */
#define RXSTAT 0x04 /* Rx status */
#define H_UBRLCR 0x08 /* mode register high */
#define M_UBRLCR 0x0C /* mode reg mid (MSB of buad)*/
#define M_UBRLCR 0x0C /* mode reg mid (MSB of baud)*/
#define L_UBRLCR 0x10 /* mode reg low (LSB of baud)*/
#define UARTCON 0x14 /* control register */
#define UARTFLG 0x18 /* flag register */
......
......@@ -6,7 +6,7 @@
* Changelog:
* 05-01-2000 SJH Created
* 05-13-2000 SJH Filled in function bodies
* 07-26-2000 SJH Removed hard coded buad rate
* 07-26-2000 SJH Removed hard coded baud rate
*/
#include <asm/hardware.h>
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment