Commit e655b9f0 authored by Zhu Yi's avatar Zhu Yi Committed by David S. Miller
Browse files

iwlwifi: fix problem when rf_killswitch change during suspend/resume



After we delay device initialization until interface up, there are more
conditions for the hardware rf_kill switch states during suspend and
resume. For example, before suspend we can have interface up or down,
rf_kill enable or disable; before resume we can have rf_kill enable or
disable. So there are totally 2^3 = 8 conditions to handle. This patch
addressed this problem and makes sure every condition works correctly.

This patch also merges the device suspend and resume handlers with the
mac_start and mac_stop code since they are basically doing the same
thing.
Signed-off-by: default avatarZhu Yi <yi.zhu@intel.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 5a66926a
......@@ -6340,7 +6340,19 @@ static int __iwl3945_up(struct iwl3945_priv *priv)
if (test_bit(STATUS_RF_KILL_SW, &priv->status)) {
IWL_WARNING("Radio disabled by SW RF kill (module "
"parameter)\n");
return 0;
return -ENODEV;
}
/* If platform's RF_KILL switch is NOT set to KILL */
if (iwl3945_read32(priv, CSR_GP_CNTRL) &
CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)
clear_bit(STATUS_RF_KILL_HW, &priv->status);
else {
set_bit(STATUS_RF_KILL_HW, &priv->status);
if (!test_bit(STATUS_IN_SUSPEND, &priv->status)) {
IWL_WARNING("Radio disabled by HW RF Kill switch\n");
return -ENODEV;
}
}
if (!priv->ucode_data_backup.v_addr || !priv->ucode_data.v_addr) {
......@@ -6375,6 +6387,10 @@ static int __iwl3945_up(struct iwl3945_priv *priv)
memcpy(priv->ucode_data_backup.v_addr, priv->ucode_data.v_addr,
priv->ucode_data.len);
/* We return success when we resume from suspend and rf_kill is on. */
if (test_bit(STATUS_RF_KILL_HW, &priv->status))
return 0;
for (i = 0; i < MAX_HW_RESTARTS; i++) {
iwl3945_clear_stations_table(priv);
......@@ -6919,12 +6935,18 @@ static int iwl3945_mac_start(struct ieee80211_hw *hw)
}
}
IWL_DEBUG_INFO("Start UP work.\n");
__iwl3945_up(priv);
ret = __iwl3945_up(priv);
priv->is_open = 1;
mutex_unlock(&priv->mutex);
if (ret)
goto out_release_irq;
IWL_DEBUG_INFO("Start UP work.\n");
if (test_bit(STATUS_IN_SUSPEND, &priv->status))
return 0;
/* Wait for START_ALIVE from ucode. Otherwise callbacks from
* mac80211 will not be run successfully. */
ret = wait_event_interruptible_timeout(priv->wait_command_queue,
......@@ -6939,6 +6961,7 @@ static int iwl3945_mac_start(struct ieee80211_hw *hw)
}
}
priv->is_open = 1;
IWL_DEBUG_MAC80211("leave\n");
return 0;
......@@ -6946,6 +6969,9 @@ out_release_irq:
free_irq(priv->pci_dev->irq, priv);
out_disable_msi:
pci_disable_msi(priv->pci_dev);
pci_disable_device(priv->pci_dev);
priv->is_open = 0;
IWL_DEBUG_MAC80211("leave - failed\n");
return ret;
}
......@@ -6955,12 +6981,17 @@ static void iwl3945_mac_stop(struct ieee80211_hw *hw)
IWL_DEBUG_MAC80211("enter\n");
/* stop mac, cancel any scan request and clear
* RXON_FILTER_ASSOC_MSK BIT
*/
if (!priv->is_open) {
IWL_DEBUG_MAC80211("leave - skip\n");
return;
}
priv->is_open = 0;
if (iwl3945_is_ready_rf(priv)) {
/* stop mac, cancel any scan request and clear
* RXON_FILTER_ASSOC_MSK BIT
*/
mutex_lock(&priv->mutex);
iwl3945_scan_cancel_timeout(priv, 100);
cancel_delayed_work(&priv->post_associate);
......@@ -7334,7 +7365,6 @@ static void iwl3945_mac_remove_interface(struct ieee80211_hw *hw,
mutex_unlock(&priv->mutex);
IWL_DEBUG_MAC80211("leave\n");
}
static int iwl3945_mac_hw_scan(struct ieee80211_hw *hw, u8 *ssid, size_t len)
......@@ -8731,89 +8761,27 @@ static int iwl3945_pci_suspend(struct pci_dev *pdev, pm_message_t state)
{
struct iwl3945_priv *priv = pci_get_drvdata(pdev);
set_bit(STATUS_IN_SUSPEND, &priv->status);
/* Take down the device; powers it off, etc. */
iwl3945_down(priv);
if (priv->mac80211_registered)
ieee80211_stop_queues(priv->hw);
if (priv->is_open) {
set_bit(STATUS_IN_SUSPEND, &priv->status);
iwl3945_mac_stop(priv->hw);
priv->is_open = 1;
}
pci_save_state(pdev);
pci_disable_device(pdev);
pci_set_power_state(pdev, PCI_D3hot);
return 0;
}
static void iwl3945_resume(struct iwl3945_priv *priv)
{
unsigned long flags;
/* The following it a temporary work around due to the
* suspend / resume not fully initializing the NIC correctly.
* Without all of the following, resume will not attempt to take
* down the NIC (it shouldn't really need to) and will just try
* and bring the NIC back up. However that fails during the
* ucode verification process. This then causes iwl3945_down to be
* called *after* iwl3945_hw_nic_init() has succeeded -- which
* then lets the next init sequence succeed. So, we've
* replicated all of that NIC init code here... */
iwl3945_write32(priv, CSR_INT, 0xFFFFFFFF);
iwl3945_hw_nic_init(priv);
iwl3945_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
iwl3945_write32(priv, CSR_UCODE_DRV_GP1_CLR,
CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
iwl3945_write32(priv, CSR_INT, 0xFFFFFFFF);
iwl3945_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
iwl3945_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
/* tell the device to stop sending interrupts */
iwl3945_disable_interrupts(priv);
spin_lock_irqsave(&priv->lock, flags);
iwl3945_clear_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
if (!iwl3945_grab_nic_access(priv)) {
iwl3945_write_prph(priv, APMG_CLK_DIS_REG,
APMG_CLK_VAL_DMA_CLK_RQT);
iwl3945_release_nic_access(priv);
}
spin_unlock_irqrestore(&priv->lock, flags);
udelay(5);
iwl3945_hw_nic_reset(priv);
/* Bring the device back up */
clear_bit(STATUS_IN_SUSPEND, &priv->status);
queue_work(priv->workqueue, &priv->up);
}
static int iwl3945_pci_resume(struct pci_dev *pdev)
{
struct iwl3945_priv *priv = pci_get_drvdata(pdev);
int err;
printk(KERN_INFO "Coming out of suspend...\n");
pci_set_power_state(pdev, PCI_D0);
err = pci_enable_device(pdev);
pci_restore_state(pdev);
/*
* Suspend/Resume resets the PCI configuration space, so we have to
* re-disable the RETRY_TIMEOUT register (0x41) to keep PCI Tx retries
* from interfering with C3 CPU state. pci_restore_state won't help
* here since it only restores the first 64 bytes pci config header.
*/
pci_write_config_byte(pdev, 0x41, 0x00);
iwl3945_resume(priv);
if (priv->is_open)
iwl3945_mac_start(priv->hw);
clear_bit(STATUS_IN_SUSPEND, &priv->status);
return 0;
}
......
......@@ -6761,7 +6761,6 @@ static void iwl4965_down(struct iwl4965_priv *priv)
static int __iwl4965_up(struct iwl4965_priv *priv)
{
int rc, i;
u32 hw_rf_kill = 0;
if (test_bit(STATUS_EXIT_PENDING, &priv->status)) {
IWL_WARNING("Exit pending; will not bring the NIC up\n");
......@@ -6771,7 +6770,19 @@ static int __iwl4965_up(struct iwl4965_priv *priv)
if (test_bit(STATUS_RF_KILL_SW, &priv->status)) {
IWL_WARNING("Radio disabled by SW RF kill (module "
"parameter)\n");
return 0;
return -ENODEV;
}
/* If platform's RF_KILL switch is NOT set to KILL */
if (iwl4965_read32(priv, CSR_GP_CNTRL) &
CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)
clear_bit(STATUS_RF_KILL_HW, &priv->status);
else {
set_bit(STATUS_RF_KILL_HW, &priv->status);
if (!test_bit(STATUS_IN_SUSPEND, &priv->status)) {
IWL_WARNING("Radio disabled by HW RF Kill switch\n");
return -ENODEV;
}
}
if (!priv->ucode_data_backup.v_addr || !priv->ucode_data.v_addr) {
......@@ -6806,17 +6817,9 @@ static int __iwl4965_up(struct iwl4965_priv *priv)
memcpy(priv->ucode_data_backup.v_addr, priv->ucode_data.v_addr,
priv->ucode_data.len);
/* If platform's RF_KILL switch is set to KILL,
* wait for BIT_INT_RF_KILL interrupt before loading uCode
* and getting things started */
if (!(iwl4965_read32(priv, CSR_GP_CNTRL) &
CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW))
hw_rf_kill = 1;
if (test_bit(STATUS_RF_KILL_HW, &priv->status) || hw_rf_kill) {
IWL_WARNING("Radio disabled by HW RF Kill switch\n");
/* We return success when we resume from suspend and rf_kill is on. */
if (test_bit(STATUS_RF_KILL_HW, &priv->status))
return 0;
}
for (i = 0; i < MAX_HW_RESTARTS; i++) {
......@@ -7379,12 +7382,18 @@ static int iwl4965_mac_start(struct ieee80211_hw *hw)
}
}
IWL_DEBUG_INFO("Start UP work.\n");
__iwl4965_up(priv);
ret = __iwl4965_up(priv);
priv->is_open = 1;
mutex_unlock(&priv->mutex);
if (ret)
goto out_release_irq;
IWL_DEBUG_INFO("Start UP work done.\n");
if (test_bit(STATUS_IN_SUSPEND, &priv->status))
return 0;
/* Wait for START_ALIVE from ucode. Otherwise callbacks from
* mac80211 will not be run successfully. */
ret = wait_event_interruptible_timeout(priv->wait_command_queue,
......@@ -7399,6 +7408,7 @@ static int iwl4965_mac_start(struct ieee80211_hw *hw)
}
}
priv->is_open = 1;
IWL_DEBUG_MAC80211("leave\n");
return 0;
......@@ -7406,6 +7416,9 @@ out_release_irq:
free_irq(priv->pci_dev->irq, priv);
out_disable_msi:
pci_disable_msi(priv->pci_dev);
pci_disable_device(priv->pci_dev);
priv->is_open = 0;
IWL_DEBUG_MAC80211("leave - failed\n");
return ret;
}
......@@ -7415,12 +7428,17 @@ static void iwl4965_mac_stop(struct ieee80211_hw *hw)
IWL_DEBUG_MAC80211("enter\n");
/* stop mac, cancel any scan request and clear
* RXON_FILTER_ASSOC_MSK BIT
*/
if (!priv->is_open) {
IWL_DEBUG_MAC80211("leave - skip\n");
return;
}
priv->is_open = 0;
if (iwl4965_is_ready_rf(priv)) {
/* stop mac, cancel any scan request and clear
* RXON_FILTER_ASSOC_MSK BIT
*/
mutex_lock(&priv->mutex);
iwl4965_scan_cancel_timeout(priv, 100);
cancel_delayed_work(&priv->post_associate);
......@@ -8152,7 +8170,6 @@ static void iwl4965_mac_reset_tsf(struct ieee80211_hw *hw)
mutex_unlock(&priv->mutex);
IWL_DEBUG_MAC80211("leave\n");
}
static int iwl4965_mac_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb,
......@@ -9327,89 +9344,27 @@ static int iwl4965_pci_suspend(struct pci_dev *pdev, pm_message_t state)
{
struct iwl4965_priv *priv = pci_get_drvdata(pdev);
set_bit(STATUS_IN_SUSPEND, &priv->status);
/* Take down the device; powers it off, etc. */
iwl4965_down(priv);
if (priv->mac80211_registered)
ieee80211_stop_queues(priv->hw);
if (priv->is_open) {
set_bit(STATUS_IN_SUSPEND, &priv->status);
iwl4965_mac_stop(priv->hw);
priv->is_open = 1;
}
pci_save_state(pdev);
pci_disable_device(pdev);
pci_set_power_state(pdev, PCI_D3hot);
return 0;
}
static void iwl4965_resume(struct iwl4965_priv *priv)
{
unsigned long flags;
/* The following it a temporary work around due to the
* suspend / resume not fully initializing the NIC correctly.
* Without all of the following, resume will not attempt to take
* down the NIC (it shouldn't really need to) and will just try
* and bring the NIC back up. However that fails during the
* ucode verification process. This then causes iwl4965_down to be
* called *after* iwl4965_hw_nic_init() has succeeded -- which
* then lets the next init sequence succeed. So, we've
* replicated all of that NIC init code here... */
iwl4965_write32(priv, CSR_INT, 0xFFFFFFFF);
iwl4965_hw_nic_init(priv);
iwl4965_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
iwl4965_write32(priv, CSR_UCODE_DRV_GP1_CLR,
CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
iwl4965_write32(priv, CSR_INT, 0xFFFFFFFF);
iwl4965_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
iwl4965_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
/* tell the device to stop sending interrupts */
iwl4965_disable_interrupts(priv);
spin_lock_irqsave(&priv->lock, flags);
iwl4965_clear_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
if (!iwl4965_grab_nic_access(priv)) {
iwl4965_write_prph(priv, APMG_CLK_DIS_REG,
APMG_CLK_VAL_DMA_CLK_RQT);
iwl4965_release_nic_access(priv);
}
spin_unlock_irqrestore(&priv->lock, flags);
udelay(5);
iwl4965_hw_nic_reset(priv);
/* Bring the device back up */
clear_bit(STATUS_IN_SUSPEND, &priv->status);
queue_work(priv->workqueue, &priv->up);
}
static int iwl4965_pci_resume(struct pci_dev *pdev)
{
struct iwl4965_priv *priv = pci_get_drvdata(pdev);
int err;
printk(KERN_INFO "Coming out of suspend...\n");
pci_set_power_state(pdev, PCI_D0);
err = pci_enable_device(pdev);
pci_restore_state(pdev);
/*
* Suspend/Resume resets the PCI configuration space, so we have to
* re-disable the RETRY_TIMEOUT register (0x41) to keep PCI Tx retries
* from interfering with C3 CPU state. pci_restore_state won't help
* here since it only restores the first 64 bytes pci config header.
*/
pci_write_config_byte(pdev, 0x41, 0x00);
iwl4965_resume(priv);
if (priv->is_open)
iwl4965_mac_start(priv->hw);
clear_bit(STATUS_IN_SUSPEND, &priv->status);
return 0;
}
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment