Commit e5b900d2 authored by Johannes Berg's avatar Johannes Berg Committed by John W. Linville

mac80211: allow drivers to request DTIM period

Some features require knowing the DTIM period
before associating. This implements the ability
to wait for a beacon in mac80211 before assoc
to provide this value. It is optional since
most likely not all drivers will need this.
Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent d28232b4
......@@ -194,7 +194,9 @@ enum ieee80211_bss_change {
* if the hardware cannot handle this it must set the
* IEEE80211_HW_2GHZ_SHORT_SLOT_INCAPABLE hardware flag
* @dtim_period: num of beacons before the next DTIM, for beaconing,
* not valid in station mode (cf. hw conf ps_dtim_period)
* valid in station mode only while @assoc is true and if also
* requested by %IEEE80211_HW_NEED_DTIM_PERIOD (cf. also hw conf
* @ps_dtim_period)
* @timestamp: beacon timestamp
* @beacon_int: beacon interval
* @assoc_capability: capabilities taken from assoc resp
......@@ -1027,6 +1029,9 @@ enum ieee80211_tkip_key_type {
* connection quality related parameters, such as the RSSI level and
* provide notifications if configured trigger levels are reached.
*
* @IEEE80211_HW_NEED_DTIM_PERIOD:
* This device needs to know the DTIM period for the BSS before
* associating.
*/
enum ieee80211_hw_flags {
IEEE80211_HW_HAS_RATE_CONTROL = 1<<0,
......@@ -1036,7 +1041,7 @@ enum ieee80211_hw_flags {
IEEE80211_HW_2GHZ_SHORT_PREAMBLE_INCAPABLE = 1<<4,
IEEE80211_HW_SIGNAL_UNSPEC = 1<<5,
IEEE80211_HW_SIGNAL_DBM = 1<<6,
/* use this hole */
IEEE80211_HW_NEED_DTIM_PERIOD = 1<<7,
IEEE80211_HW_SPECTRUM_MGMT = 1<<8,
IEEE80211_HW_AMPDU_AGGREGATION = 1<<9,
IEEE80211_HW_SUPPORTS_PS = 1<<10,
......
......@@ -238,6 +238,7 @@ enum ieee80211_work_type {
IEEE80211_WORK_ABORT,
IEEE80211_WORK_DIRECT_PROBE,
IEEE80211_WORK_AUTH,
IEEE80211_WORK_ASSOC_BEACON_WAIT,
IEEE80211_WORK_ASSOC,
IEEE80211_WORK_REMAIN_ON_CHANNEL,
};
......
......@@ -870,6 +870,11 @@ static void ieee80211_set_associated(struct ieee80211_sub_if_data *sdata,
ieee80211_led_assoc(local, 1);
if (local->hw.flags & IEEE80211_HW_NEED_DTIM_PERIOD)
bss_conf->dtim_period = bss->dtim_period;
else
bss_conf->dtim_period = 0;
bss_conf->assoc = 1;
/*
* For now just always ask the driver to update the basic rateset
......@@ -1751,7 +1756,8 @@ void ieee80211_sta_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata,
if (wk->sdata != sdata)
continue;
if (wk->type != IEEE80211_WORK_ASSOC)
if (wk->type != IEEE80211_WORK_ASSOC &&
wk->type != IEEE80211_WORK_ASSOC_BEACON_WAIT)
continue;
if (memcmp(mgmt->bssid, wk->filter_ta, ETH_ALEN))
......@@ -2086,6 +2092,8 @@ static enum work_done_result ieee80211_assoc_done(struct ieee80211_work *wk,
struct sk_buff *skb)
{
struct ieee80211_mgmt *mgmt;
struct ieee80211_rx_status *rx_status;
struct ieee802_11_elems elems;
u16 status;
if (!skb) {
......@@ -2093,6 +2101,19 @@ static enum work_done_result ieee80211_assoc_done(struct ieee80211_work *wk,
return WORK_DONE_DESTROY;
}
if (wk->type == IEEE80211_WORK_ASSOC_BEACON_WAIT) {
mutex_lock(&wk->sdata->u.mgd.mtx);
rx_status = (void *) skb->cb;
ieee802_11_parse_elems(skb->data + 24 + 12, skb->len - 24 - 12, &elems);
ieee80211_rx_bss_info(wk->sdata, (void *)skb->data, skb->len, rx_status,
&elems, true);
mutex_unlock(&wk->sdata->u.mgd.mtx);
wk->type = IEEE80211_WORK_ASSOC;
/* not really done yet */
return WORK_DONE_REQUEUE;
}
mgmt = (void *)skb->data;
status = le16_to_cpu(mgmt->u.assoc_resp.status_code);
......@@ -2206,10 +2227,14 @@ int ieee80211_mgd_assoc(struct ieee80211_sub_if_data *sdata,
if (req->prev_bssid)
memcpy(wk->assoc.prev_bssid, req->prev_bssid, ETH_ALEN);
wk->type = IEEE80211_WORK_ASSOC;
wk->chan = req->bss->channel;
wk->sdata = sdata;
wk->done = ieee80211_assoc_done;
if (!bss->dtim_period &&
sdata->local->hw.flags & IEEE80211_HW_NEED_DTIM_PERIOD)
wk->type = IEEE80211_WORK_ASSOC_BEACON_WAIT;
else
wk->type = IEEE80211_WORK_ASSOC;
if (req->use_mfp) {
ifmgd->mfp = IEEE80211_MFP_REQUIRED;
......@@ -2257,7 +2282,8 @@ int ieee80211_mgd_deauth(struct ieee80211_sub_if_data *sdata,
if (wk->type != IEEE80211_WORK_DIRECT_PROBE &&
wk->type != IEEE80211_WORK_AUTH &&
wk->type != IEEE80211_WORK_ASSOC)
wk->type != IEEE80211_WORK_ASSOC &&
wk->type != IEEE80211_WORK_ASSOC_BEACON_WAIT)
continue;
if (memcmp(req->bss->bssid, wk->filter_ta, ETH_ALEN))
......
......@@ -114,6 +114,10 @@ ieee80211_bss_info_update(struct ieee80211_local *local,
bss->dtim_period = tim_ie->dtim_period;
}
/* If the beacon had no TIM IE, or it was invalid, use 1 */
if (beacon && !bss->dtim_period)
bss->dtim_period = 1;
/* replace old supported rates if we get new values */
srlen = 0;
if (elems->supp_rates) {
......
......@@ -560,6 +560,22 @@ ieee80211_remain_on_channel_timeout(struct ieee80211_work *wk)
return WORK_ACT_TIMEOUT;
}
static enum work_action __must_check
ieee80211_assoc_beacon_wait(struct ieee80211_work *wk)
{
if (wk->started)
return WORK_ACT_TIMEOUT;
/*
* Wait up to one beacon interval ...
* should this be more if we miss one?
*/
printk(KERN_DEBUG "%s: waiting for beacon from %pM\n",
wk->sdata->name, wk->filter_ta);
wk->timeout = TU_TO_EXP_TIME(wk->assoc.bss->beacon_interval);
return WORK_ACT_NONE;
}
static void ieee80211_auth_challenge(struct ieee80211_work *wk,
struct ieee80211_mgmt *mgmt,
size_t len)
......@@ -709,6 +725,25 @@ ieee80211_rx_mgmt_probe_resp(struct ieee80211_work *wk,
return WORK_ACT_DONE;
}
static enum work_action __must_check
ieee80211_rx_mgmt_beacon(struct ieee80211_work *wk,
struct ieee80211_mgmt *mgmt, size_t len)
{
struct ieee80211_sub_if_data *sdata = wk->sdata;
struct ieee80211_local *local = sdata->local;
ASSERT_WORK_MTX(local);
if (wk->type != IEEE80211_WORK_ASSOC_BEACON_WAIT)
return WORK_ACT_MISMATCH;
if (len < 24 + 12)
return WORK_ACT_NONE;
printk(KERN_DEBUG "%s: beacon received\n", sdata->name);
return WORK_ACT_DONE;
}
static void ieee80211_work_rx_queued_mgmt(struct ieee80211_local *local,
struct sk_buff *skb)
{
......@@ -731,6 +766,7 @@ static void ieee80211_work_rx_queued_mgmt(struct ieee80211_local *local,
case IEEE80211_WORK_DIRECT_PROBE:
case IEEE80211_WORK_AUTH:
case IEEE80211_WORK_ASSOC:
case IEEE80211_WORK_ASSOC_BEACON_WAIT:
bssid = wk->filter_ta;
break;
default:
......@@ -745,6 +781,9 @@ static void ieee80211_work_rx_queued_mgmt(struct ieee80211_local *local,
continue;
switch (fc & IEEE80211_FCTL_STYPE) {
case IEEE80211_STYPE_BEACON:
rma = ieee80211_rx_mgmt_beacon(wk, mgmt, skb->len);
break;
case IEEE80211_STYPE_PROBE_RESP:
rma = ieee80211_rx_mgmt_probe_resp(wk, mgmt, skb->len,
rx_status);
......@@ -916,6 +955,9 @@ static void ieee80211_work_work(struct work_struct *work)
case IEEE80211_WORK_REMAIN_ON_CHANNEL:
rma = ieee80211_remain_on_channel_timeout(wk);
break;
case IEEE80211_WORK_ASSOC_BEACON_WAIT:
rma = ieee80211_assoc_beacon_wait(wk);
break;
}
wk->started = started;
......@@ -1065,6 +1107,7 @@ ieee80211_rx_result ieee80211_work_rx_mgmt(struct ieee80211_sub_if_data *sdata,
case IEEE80211_STYPE_PROBE_RESP:
case IEEE80211_STYPE_ASSOC_RESP:
case IEEE80211_STYPE_REASSOC_RESP:
case IEEE80211_STYPE_BEACON:
skb_queue_tail(&local->work_skb_queue, skb);
ieee80211_queue_work(&local->hw, &local->work_work);
return RX_QUEUED;
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment