Commit e44ba033 authored by Vitaliy Ivanov's avatar Vitaliy Ivanov Committed by Jiri Kosina

treewide: remove duplicate includes

Many stupid corrections of duplicated includes based on the output of
scripts/checkincludes.pl.
Signed-off-by: default avatarVitaliy Ivanov <vitalivanov@gmail.com>
Signed-off-by: default avatarJiri Kosina <jkosina@suse.cz>
parent 1816315b
......@@ -18,7 +18,6 @@
#include <linux/leds.h>
#include <linux/gpio.h>
#include <linux/rfkill.h>
#include <linux/leds.h>
#include <mach/regs-gpio.h>
#include <mach/hardware.h>
......
......@@ -15,11 +15,9 @@
#include <linux/platform_device.h>
#include <linux/leds.h>
#include <linux/etherdevice.h>
#include <linux/reboot.h>
#include <linux/time.h>
#include <linux/io.h>
#include <linux/gpio.h>
#include <linux/leds.h>
#include <asm/bootinfo.h>
#include <asm/irq.h>
......
......@@ -16,11 +16,9 @@
#include <linux/platform_device.h>
#include <linux/leds.h>
#include <linux/etherdevice.h>
#include <linux/reboot.h>
#include <linux/time.h>
#include <linux/io.h>
#include <linux/gpio.h>
#include <linux/leds.h>
#include <asm/bootinfo.h>
#include <asm/irq.h>
......
......@@ -44,7 +44,6 @@
#include <asm/mpic.h>
#include <asm/vdso_datapage.h>
#include <asm/cputhreads.h>
#include <asm/mpic.h>
#include <asm/xics.h>
#include "plpar_wrappers.h"
......
......@@ -14,7 +14,6 @@
#include <linux/errno.h>
#include <asm/asm-offsets.h>
#include <asm/setup.h>
#include <asm/asm-offsets.h>
#include <asm/ptrace.h>
#include <asm/thread_info.h>
......
......@@ -13,8 +13,6 @@
#include <linux/oprofile.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/oprofile.h>
#include <linux/errno.h>
#include <linux/fs.h>
#include "../../../drivers/oprofile/oprof.h"
......
......@@ -22,7 +22,6 @@
#include "mmu.h"
#include "x86.h"
#include "kvm_cache_regs.h"
#include "x86.h"
#include <linux/kvm_host.h>
#include <linux/types.h>
......
......@@ -17,6 +17,7 @@
#define _XTENSA_UACCESS_H
#include <linux/errno.h>
#include <asm/types.h>
#define VERIFY_READ 0
#define VERIFY_WRITE 1
......@@ -26,7 +27,6 @@
#include <asm/current.h>
#include <asm/asm-offsets.h>
#include <asm/processor.h>
#include <asm/types.h>
/*
* These assembly macros mirror the C macros that follow below. They
......@@ -157,7 +157,6 @@
#else /* __ASSEMBLY__ not defined */
#include <linux/sched.h>
#include <asm/types.h>
/*
* The fs value determines whether argument validity checking should
......
......@@ -15,7 +15,6 @@
#include <linux/module.h>
#include <linux/err.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/gpio.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
......
......@@ -31,7 +31,6 @@
#include "nouveau_grctx.h"
#include "nouveau_dma.h"
#include "nouveau_vm.h"
#include "nouveau_ramht.h"
#include "nv50_evo.h"
struct nv50_graph_engine {
......
......@@ -42,7 +42,6 @@
#include <linux/bitops.h>
#include <media/rc-core.h>
#include <linux/pci_ids.h>
#include <linux/delay.h>
#include "ite-cir.h"
......
......@@ -22,7 +22,6 @@
#include <linux/gpio.h>
#include <linux/regulator/consumer.h>
#include <linux/videodev2.h>
#include <linux/version.h>
#include <media/v4l2-ctrls.h>
#include <media/v4l2-device.h>
#include <media/v4l2-subdev.h>
......
......@@ -18,7 +18,6 @@
#include <linux/mm.h>
#include <linux/sched.h>
#include <linux/file.h>
#include <linux/slab.h>
#include <media/videobuf2-core.h>
#include <media/videobuf2-memops.h>
......
......@@ -34,7 +34,6 @@
#include <linux/if_arp.h>
#include <linux/if_ether.h>
#include <linux/list.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/can.h>
......
......@@ -28,7 +28,6 @@
#include <linux/if_arp.h>
#include <linux/if_ether.h>
#include <linux/list.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
......
......@@ -66,15 +66,14 @@
#include <asm/byteorder.h>
#include <asm/uaccess.h>
#include <asm/irq.h>
#include <asm/prom.h>
#ifdef CONFIG_SPARC
#include <asm/idprom.h>
#include <asm/prom.h>
#endif
#ifdef CONFIG_PPC_PMAC
#include <asm/pci-bridge.h>
#include <asm/prom.h>
#include <asm/machdep.h>
#include <asm/pmac_feature.h>
#endif
......
......@@ -24,7 +24,6 @@
#include "debug.h"
#include "base.h"
#include "reg.h"
#include "debug.h"
/* return bus cachesize in 4B word units */
static void ath5k_ahb_read_cachesize(struct ath_common *common, int *csz)
......
......@@ -52,7 +52,6 @@
#include "aggr_recv_api.h"
#include <host_version.h>
#include <linux/rtnetlink.h>
#include <linux/init.h>
#include <linux/moduleparam.h>
#include "ar6000_api.h"
#ifdef CONFIG_HOST_TCMD_SUPPORT
......
......@@ -20,25 +20,23 @@
#include <linux/file.h>
#include <linux/string.h>
#include <linux/etherdevice.h>
#include <net/ip.h>
#include <linux/wait.h>
#include <linux/proc_fs.h>
#include <linux/interrupt.h>
#include <linux/version.h>
#include <linux/stddef.h>
#include <linux/kernel.h>
#include <linux/stat.h>
#include <linux/fcntl.h>
#include <linux/unistd.h>
#include <linux/sched.h>
#include <linux/mm.h>
#include <linux/pagemap.h>
#include <asm/uaccess.h>
#include <linux/kthread.h>
#include <linux/tcp.h>
#include <linux/udp.h>
#include <linux/usb.h>
#include <asm/uaccess.h>
#include <net/ip.h>
#include "Typedefs.h"
#include "Version.h"
......@@ -61,7 +59,6 @@
#include "Queue.h"
#include "vendorspecificextn.h"
#include "InterfaceMacros.h"
#include "InterfaceAdapter.h"
#include "InterfaceIsr.h"
......
......@@ -26,7 +26,6 @@
#include BCMEMBEDIMAGE
#endif /* BCMEMBEDIMAGE */
#include <bcmdefs.h>
#include <bcmutils.h>
#include <bcmdevs.h>
......
......@@ -17,7 +17,6 @@
#ifndef _wl_cfg80211_h_
#define _wl_cfg80211_h_
#include <linux/wireless.h>
#include <linux/wireless.h>
#include <net/cfg80211.h>
#include <wlioctl.h>
......
......@@ -19,21 +19,16 @@
#include <bcmdefs.h>
#include <linux/netdevice.h>
#include <wlioctl.h>
#include <bcmutils.h>
#include <linux/if_arp.h>
#include <asm/uaccess.h>
#include <linux/ieee80211.h>
#include <dngl_stats.h>
#include <dhd.h>
#include <dhdioctl.h>
#include <linux/ieee80211.h>
typedef const struct si_pub si_t;
#include <wlioctl.h>
#include <dngl_stats.h>
#include <dhd.h>
typedef const struct si_pub si_t;
#define WL_ERROR(fmt, args...) printk(fmt, ##args)
#define WL_TRACE(fmt, args...) no_printk(fmt, ##args)
......
......@@ -38,7 +38,6 @@
#include "psb_drv.h"
#include "psb_reg.h"
#include "psb_drv.h"
#include "psb_fb.h"
void psb_spank(struct drm_psb_private *dev_priv)
......
......@@ -24,7 +24,6 @@
#include <linux/hiddev.h>
#include <linux/pci.h>
#include <linux/dmi.h>
#include <linux/delay.h>
#include "hyperv.h"
......
......@@ -35,7 +35,6 @@
#include <arpa/inet.h>
#include <linux/connector.h>
#include <linux/netlink.h>
#include <sys/socket.h>
#include <ifaddrs.h>
#include <netdb.h>
#include <syslog.h>
......
......@@ -21,7 +21,6 @@
#include <linux/semaphore.h>
#include <linux/list.h>
#include <linux/notifier.h>
#include <linux/workqueue.h>
#include <linux/platform_device.h>
#include "nvec.h"
......
......@@ -29,7 +29,6 @@ struct qos_priv {
#include "rtl871x_ht.h"
#include "rtl871x_cmd.h"
#include "wlan_bssdef.h"
#include "rtl871x_xmit.h"
#include "rtl871x_recv.h"
#include "rtl871x_security.h"
......
......@@ -22,7 +22,6 @@
#include <linux/module.h>
#include <linux/sched.h>
#include <linux/kref.h>
#include <linux/netdevice.h>
#include <linux/skbuff.h>
#include <linux/usb.h>
#include <linux/usb/ch9.h>
......
......@@ -50,7 +50,6 @@
#include <linux/interrupt.h>
#include <linux/pagemap.h>
#include <asm/cacheflush.h>
#include <linux/sched.h>
#include <linux/delay.h>
#include <linux/jiffies.h>
#include <linux/rar_register.h>
......
......@@ -13,7 +13,6 @@
#include <glib.h>
#include <unistd.h>
#include <stdio.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <stdlib.h>
......
......@@ -315,5 +315,5 @@ void cy_as_hal_set_ep_dma_mode(uint8_t ep, bool sg_xfer_enabled);
/* moved to staging location
#include <linux/westbridge/cyas_cplus_end.h>
*/
#include "../../../../../../../include/linux/westbridge/cyas_cplus_start.h"
#include "../../../../../../../include/linux/westbridge/cyas_cplus_end.h"
#endif
......@@ -54,19 +54,15 @@
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
#include <linux/sched.h>
#include <linux/module.h>
#include <linux/init.h>
#include "../include/linux/westbridge/cyastoria.h"
#include "../include/linux/westbridge/cyashal.h"
#include "../include/linux/westbridge/cyasdevice.h"
#include "cyasgadget_ioctl.h"
#include <linux/module.h>
#include <linux/init.h>
/*char driver defines, revisit*/
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/init.h>
#include <linux/fs.h> /* everything... */
#include <linux/errno.h> /* error codes */
#include <linux/types.h> /* size_t */
......
......@@ -31,7 +31,6 @@
#include <scsi/scsi_host.h>
#include <scsi/scsi_device.h>
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_tcq.h>
#include <target/target_core_base.h>
#include <target/target_core_transport.h>
......
......@@ -45,7 +45,6 @@
#include <target/target_core_device.h>
#include <target/target_core_tpg.h>
#include <target/target_core_configfs.h>
#include <target/target_core_base.h>
#include <target/target_core_tmr.h>
#include <target/configfs_macros.h>
......
......@@ -48,7 +48,6 @@
#include <target/target_core_device.h>
#include <target/target_core_tpg.h>
#include <target/target_core_configfs.h>
#include <target/target_core_base.h>
#include <target/configfs_macros.h>
#include "tcm_fc.h"
......
......@@ -53,7 +53,6 @@
#include <target/target_core_device.h>
#include <target/target_core_tpg.h>
#include <target/target_core_configfs.h>
#include <target/target_core_base.h>
#include <target/configfs_macros.h>
#include "tcm_fc.h"
......
......@@ -46,10 +46,8 @@
#include <target/target_core_device.h>
#include <target/target_core_tpg.h>
#include <target/target_core_configfs.h>
#include <target/target_core_base.h>
#include <target/configfs_macros.h>
#include <scsi/libfc.h>
#include "tcm_fc.h"
static void ft_sess_delete_all(struct ft_tport *);
......
......@@ -28,7 +28,6 @@
#include <linux/usb.h>
#include <linux/usb/gadget.h>
#include <linux/usb/otg.h>
#include <linux/types.h>
#include "otg_fsm.h"
......
......@@ -29,7 +29,6 @@
#include <linux/slab.h>
#include <linux/prefetch.h>
#include <linux/delay.h>
#include <linux/prefetch.h>
#include <video/udlfb.h>
#include "edid.h"
......
......@@ -42,7 +42,6 @@
#include <linux/sched.h>
#include <linux/signal.h>
#include <linux/sfi.h>
#include <linux/types.h>
#include <asm/irq.h>
#include <asm/atomic.h>
#include <asm/intel_scu_ipc.h>
......
......@@ -36,6 +36,8 @@
#include <linux/types.h>
#include <linux/string.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/nfs_idmap.h>
static int nfs_map_string_to_numeric(const char *name, size_t namelen, __u32 *res)
{
......@@ -59,12 +61,10 @@ static int nfs_map_numeric_to_string(__u32 id, char *buf, size_t buflen)
#ifdef CONFIG_NFS_USE_NEW_IDMAPPER
#include <linux/slab.h>
#include <linux/cred.h>
#include <linux/sunrpc/sched.h>
#include <linux/nfs4.h>
#include <linux/nfs_fs_sb.h>
#include <linux/nfs_idmap.h>
#include <linux/keyctl.h>
#include <linux/key-type.h>
#include <linux/rcupdate.h>
......@@ -284,18 +284,15 @@ int nfs_map_gid_to_group(const struct nfs_server *server, __u32 gid, char *buf,
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/socket.h>
#include <linux/in.h>
#include <linux/sched.h>
#include <linux/sunrpc/clnt.h>
#include <linux/workqueue.h>
#include <linux/sunrpc/rpc_pipe_fs.h>
#include <linux/nfs_fs.h>
#include <linux/nfs_idmap.h>
#include "nfs4_fs.h"
#define IDMAP_HASH_SZ 128
......
......@@ -36,7 +36,6 @@
#include "dir.h"
#include "buffer_head_io.h"
#include "sysfile.h"
#include "suballoc.h"
#include "refcounttree.h"
#include "move_extents.h"
......
......@@ -376,7 +376,6 @@ struct inodes_stat_t {
#include <linux/linkage.h>
#include <linux/wait.h>
#include <linux/types.h>
#include <linux/kdev_t.h>
#include <linux/dcache.h>
#include <linux/path.h>
......
......@@ -41,7 +41,6 @@
#include <linux/proc_fs.h>
#include <net/sock.h>
#include <net/ping.h>
#include <net/icmp.h>
#include <net/udp.h>
#include <net/route.h>
#include <net/inet_common.h>
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment