Commit df9b4296 authored by Johannes Berg's avatar Johannes Berg
Browse files

Merge remote-tracking branch 'wireless/master' into mac80211

parents 33766368 c3e7724b
What: /proc/sys/vm/nr_pdflush_threads
Date: June 2012
Contact: Wanpeng Li <liwp@linux.vnet.ibm.com>
Description: Since pdflush is replaced by per-BDI flusher, the interface of old pdflush
exported in /proc/sys/vm/ should be removed.
......@@ -39,6 +39,17 @@ Users: udev rules to set ownership and access permissions or ACLs of
/dev/fw[0-9]+ character device files
What: /sys/bus/firewire/devices/fw[0-9]+/is_local
Date: July 2012
KernelVersion: 3.6
Contact: linux1394-devel@lists.sourceforge.net
Description:
IEEE 1394 node device attribute.
Read-only and immutable.
Values: 1: The sysfs entry represents a local node (a controller card).
0: The sysfs entry represents a remote node.
What: /sys/bus/firewire/devices/fw[0-9]+[.][0-9]+/
Date: May 2007
KernelVersion: 2.6.22
......
What: /sys/bus/w1/devices/.../pio
Date: May 2012
Contact: Markus Franke <franm@hrz.tu-chemnitz.de>
Description: read/write the contents of the two PIO's of the DS28E04-100
see Documentation/w1/slaves/w1_ds28e04 for detailed information
Users: any user space application which wants to communicate with DS28E04-100
What: /sys/bus/w1/devices/.../eeprom
Date: May 2012
Contact: Markus Franke <franm@hrz.tu-chemnitz.de>
Description: read/write the contents of the EEPROM memory of the DS28E04-100
see Documentation/w1/slaves/w1_ds28e04 for detailed information
Users: any user space application which wants to communicate with DS28E04-100
......@@ -24,4 +24,4 @@ though.
(As of this writing, this ABI documentation as been confirmed for x86_64.
The maintainers of the other vDSO-using architectures should confirm
that it is correct for their architecture.)
\ No newline at end of file
that it is correct for their architecture.)
......@@ -58,16 +58,18 @@ Description: The /dev/kmsg character device node provides userspace access
The output format consists of a prefix carrying the syslog
prefix including priority and facility, the 64 bit message
sequence number and the monotonic timestamp in microseconds.
The values are separated by a ','. Future extensions might
add more comma separated values before the terminating ';'.
Unknown values should be gracefully ignored.
sequence number and the monotonic timestamp in microseconds,
and a flag field. All fields are separated by a ','.
Future extensions might add more comma separated values before
the terminating ';'. Unknown fields and values should be
gracefully ignored.
The human readable text string starts directly after the ';'
and is terminated by a '\n'. Untrusted values derived from
hardware or other facilities are printed, therefore
all non-printable characters in the log message are escaped
by "\x00" C-style hex encoding.
all non-printable characters and '\' itself in the log message
are escaped by "\x00" C-style hex encoding.
A line starting with ' ', is a continuation line, adding
key/value pairs to the log message, which provide the machine
......@@ -75,11 +77,11 @@ Description: The /dev/kmsg character device node provides userspace access
userspace.
Example:
7,160,424069;pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
7,160,424069,-;pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
SUBSYSTEM=acpi
DEVICE=+acpi:PNP0A03:00
6,339,5140900;NET: Registered protocol family 10
30,340,5690716;udevd[80]: starting version 181
6,339,5140900,-;NET: Registered protocol family 10
30,340,5690716,-;udevd[80]: starting version 181
The DEVICE= key uniquely identifies devices the following way:
b12:8 - block dev_t
......@@ -87,4 +89,13 @@ Description: The /dev/kmsg character device node provides userspace access
n8 - netdev ifindex
+sound:card0 - subsystem:devname
The flags field carries '-' by default. A 'c' indicates a
fragment of a line. All following fragments are flagged with
'+'. Note, that these hints about continuation lines are not
neccessarily correct, and the stream could be interleaved with
unrelated messages, but merging the lines in the output
usually produces better human readable results. A similar
logic is used internally when messages are printed to the
console, /proc/kmsg or the syslog() syscall.
Users: dmesg(1), userspace kernel log consumers
......@@ -96,4 +96,4 @@ Description:
overhead, allocated for this disk. So, allocator space
efficiency can be calculated using compr_data_size and this
statistic.
Unit: bytes
\ No newline at end of file
Unit: bytes
......@@ -40,9 +40,9 @@ Contact: linux-iio@vger.kernel.org
Description:
Some devices have internal clocks. This parameter sets the
resulting sampling frequency. In many devices this
parameter has an effect on input filters etc rather than
parameter has an effect on input filters etc. rather than
simply controlling when the input is sampled. As this
effects datardy triggers, hardware buffers and the sysfs
effects data ready triggers, hardware buffers and the sysfs
direct access interfaces, it may be found in any of the
relevant directories. If it effects all of the above
then it is to be found in the base device directory.
......@@ -74,7 +74,7 @@ What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_supply_raw
KernelVersion: 2.6.35
Contact: linux-iio@vger.kernel.org
Description:
Raw (unscaled no bias removal etc) voltage measurement from
Raw (unscaled no bias removal etc.) voltage measurement from
channel Y. In special cases where the channel does not
correspond to externally available input one of the named
versions may be used. The number must always be specified and
......@@ -118,11 +118,11 @@ What: /sys/bus/iio/devices/iio:deviceX/in_temp_z_raw
KernelVersion: 2.6.35
Contact: linux-iio@vger.kernel.org
Description:
Raw (unscaled no bias removal etc) temperature measurement.
Raw (unscaled no bias removal etc.) temperature measurement.
If an axis is specified it generally means that the temperature
sensor is associated with one part of a compound device (e.g.
a gyroscope axis). Units after application of scale and offset
are milli degrees Celsuis.
are milli degrees Celsius.
What: /sys/bus/iio/devices/iio:deviceX/in_tempX_input
KernelVersion: 2.6.38
......@@ -148,10 +148,9 @@ KernelVersion: 2.6.35
Contact: linux-iio@vger.kernel.org
Description:
Angular velocity about axis x, y or z (may be arbitrarily
assigned) Data converted by application of offset then scale to
radians per second. Has all the equivalent parameters as
per voltageY. Units after application of scale and offset are
radians per second.
assigned). Has all the equivalent parameters as per voltageY.
Units after application of scale and offset are radians per
second.
What: /sys/bus/iio/devices/iio:deviceX/in_incli_x_raw
What: /sys/bus/iio/devices/iio:deviceX/in_incli_y_raw
......@@ -161,7 +160,7 @@ Contact: linux-iio@vger.kernel.org
Description:
Inclination raw reading about axis x, y or z (may be
arbitrarily assigned). Data converted by application of offset
and scale to Degrees.
and scale to degrees.
What: /sys/bus/iio/devices/iio:deviceX/in_magn_x_raw
What: /sys/bus/iio/devices/iio:deviceX/in_magn_y_raw
......@@ -203,7 +202,7 @@ Contact: linux-iio@vger.kernel.org
Description:
If known for a device, offset to be added to <type>[Y]_raw prior
to scaling by <type>[Y]_scale in order to obtain value in the
<type> units as specified in <type>[y]_raw documentation.
<type> units as specified in <type>[Y]_raw documentation.
Not present if the offset is always 0 or unknown. If Y or
axis <x|y|z> is not present, then the offset applies to all
in channels of <type>.
......@@ -249,7 +248,7 @@ What: /sys/bus/iio/devices/iio:deviceX/in_proximity0_calibbias
KernelVersion: 2.6.35
Contact: linux-iio@vger.kernel.org
Description:
Hardware applied calibration offset. (assumed to fix production
Hardware applied calibration offset (assumed to fix production
inaccuracies).
What /sys/bus/iio/devices/iio:deviceX/in_voltageY_calibscale
......@@ -266,7 +265,7 @@ what /sys/bus/iio/devices/iio:deviceX/in_proximity0_calibscale
KernelVersion: 2.6.35
Contact: linux-iio@vger.kernel.org
Description:
Hardware applied calibration scale factor. (assumed to fix
Hardware applied calibration scale factor (assumed to fix
production inaccuracies). If shared across all channels,
<type>_calibscale is used.
......@@ -276,10 +275,10 @@ What: /sys/.../iio:deviceX/in_voltage-voltage_scale_available
What: /sys/.../iio:deviceX/out_voltageX_scale_available
What: /sys/.../iio:deviceX/out_altvoltageX_scale_available
What: /sys/.../iio:deviceX/in_capacitance_scale_available
KernelVersion: 2.635
KernelVersion: 2.6.35
Contact: linux-iio@vger.kernel.org
Description:
If a discrete set of scale values are available, they
If a discrete set of scale values is available, they
are listed in this attribute.
What /sys/bus/iio/devices/iio:deviceX/out_voltageY_hardwaregain
......@@ -330,9 +329,11 @@ Contact: linux-iio@vger.kernel.org
Description:
Specifies the output powerdown mode.
DAC output stage is disconnected from the amplifier and
1kohm_to_gnd: connected to ground via an 1kOhm resistor
100kohm_to_gnd: connected to ground via an 100kOhm resistor
three_state: left floating
1kohm_to_gnd: connected to ground via an 1kOhm resistor,
6kohm_to_gnd: connected to ground via a 6kOhm resistor,
20kohm_to_gnd: connected to ground via a 20kOhm resistor,
100kohm_to_gnd: connected to ground via an 100kOhm resistor,
three_state: left floating.
For a list of available output power down options read
outX_powerdown_mode_available. If Y is not present the
mode is shared across all outputs.
......@@ -355,9 +356,10 @@ KernelVersion: 2.6.38
Contact: linux-iio@vger.kernel.org
Description:
Writing 1 causes output Y to enter the power down mode specified
by the corresponding outY_powerdown_mode. Clearing returns to
normal operation. Y may be suppressed if all outputs are
controlled together.
by the corresponding outY_powerdown_mode. DAC output stage is
disconnected from the amplifier. Clearing returns to normal
operation. Y may be suppressed if all outputs are controlled
together.
What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_frequency
KernelVersion: 3.4.0
......@@ -421,12 +423,12 @@ Description:
different values, but the device can only enable both thresholds
or neither.
Note the driver will assume the last p events requested are
to be enabled where p is however many it supports (which may
vary depending on the exact set requested. So if you want to be
to be enabled where p is how many it supports (which may vary
depending on the exact set requested. So if you want to be
sure you have set what you think you have, check the contents of
these attributes after everything is configured. Drivers may
have to buffer any parameters so that they are consistent when
a given event type is enabled a future point (and not those for
a given event type is enabled at a future point (and not those for
whatever event was previously enabled).
What: /sys/.../iio:deviceX/events/in_accel_x_roc_rising_en
......@@ -702,7 +704,7 @@ What: /sys/.../buffer/scan_elements/in_anglvel_type
What: /sys/.../buffer/scan_elements/in_magn_type
What: /sys/.../buffer/scan_elements/in_incli_type
What: /sys/.../buffer/scan_elements/in_voltageY_type
What: /sys/.../buffer/scan_elements/in_voltage-in_type
What: /sys/.../buffer/scan_elements/in_voltage_type
What: /sys/.../buffer/scan_elements/in_voltageY_supply_type
What: /sys/.../buffer/scan_elements/in_timestamp_type
KernelVersion: 2.6.37
......@@ -723,7 +725,7 @@ Description:
the buffer output value appropriately. The storagebits value
also specifies the data alignment. So s48/64>>2 will be a
signed 48 bit integer stored in a 64 bit location aligned to
a a64 bit boundary. To obtain the clean value, shift right 2
a 64 bit boundary. To obtain the clean value, shift right 2
and apply a mask to zero the top 16 bits of the result.
For other storage combinations this attribute will be extended
appropriately.
......
What: /sys/bus/iio/devices/iio:deviceX/pll2_feedback_clk_present
What: /sys/bus/iio/devices/iio:deviceX/pll2_reference_clk_present
What: /sys/bus/iio/devices/iio:deviceX/pll1_reference_clk_a_present
What: /sys/bus/iio/devices/iio:deviceX/pll1_reference_clk_b_present
What: /sys/bus/iio/devices/iio:deviceX/pll1_reference_clk_test_present
What: /sys/bus/iio/devices/iio:deviceX/vcxo_clk_present
KernelVersion: 3.4.0
Contact: linux-iio@vger.kernel.org
Description:
Reading returns either '1' or '0'.
'1' means that the clock in question is present.
'0' means that the clock is missing.
What: /sys/bus/iio/devices/iio:deviceX/pllY_locked
KernelVersion: 3.4.0
Contact: linux-iio@vger.kernel.org
Description:
Reading returns either '1' or '0'. '1' means that the
pllY is locked.
What: /sys/bus/iio/devices/iio:deviceX/store_eeprom
KernelVersion: 3.4.0
Contact: linux-iio@vger.kernel.org
Description:
Writing '1' stores the current device configuration into
on-chip EEPROM. After power-up or chip reset the device will
automatically load the saved configuration.
What: /sys/bus/iio/devices/iio:deviceX/sync_dividers
KernelVersion: 3.4.0
Contact: linux-iio@vger.kernel.org
Description:
Writing '1' triggers the clock distribution synchronization
functionality. All dividers are reset and the channels start
with their predefined phase offsets (out_altvoltageY_phase).
Writing this file has the effect as driving the external
/SYNC pin low.
What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_frequency_resolution
KernelVersion: 3.4.0
Contact: linux-iio@vger.kernel.org
Description:
Stores channel Y frequency resolution/channel spacing in Hz.
The value given directly influences the MODULUS used by
the fractional-N PLL. It is assumed that the algorithm
that is used to compute the various dividers, is able to
generate proper values for multiples of channel spacing.
What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_refin_frequency
KernelVersion: 3.4.0
Contact: linux-iio@vger.kernel.org
Description:
Sets channel Y REFin frequency in Hz. In some clock chained
applications, the reference frequency used by the PLL may
change during runtime. This attribute allows the user to
adjust the reference frequency accordingly.
The value written has no effect until out_altvoltageY_frequency
is updated. Consider to use out_altvoltageY_powerdown to power
down the PLL and it's RFOut buffers during REFin changes.
What: /sys/.../events/in_illuminance0_thresh_either_en
Date: April 2012
KernelVersion: 3.5
Contact: Johan Hovold <jhovold@gmail.com>
Description:
Event generated when channel passes one of the four thresholds
in each direction (rising|falling) and a zone change occurs.
The corresponding light zone can be read from
in_illuminance0_zone.
What: /sys/.../events/in_illuminance0_threshY_hysteresis
Date: May 2012
KernelVersion: 3.5
Contact: Johan Hovold <jhovold@gmail.com>
Description:
Get the hysteresis for thresholds Y, that is,
threshY_hysteresis = threshY_raising - threshY_falling
What: /sys/.../events/illuminance_threshY_falling_value
What: /sys/.../events/illuminance_threshY_raising_value
Date: April 2012
KernelVersion: 3.5
Contact: Johan Hovold <jhovold@gmail.com>
Description:
Specifies the value of threshold that the device is comparing
against for the events enabled by
in_illuminance0_thresh_either_en (0..255), where Y in 0..3.
Note that threshY_falling must be less than or equal to
threshY_raising.
These thresholds correspond to the eight zone-boundary
registers (boundaryY_{low,high}) and define the five light
zones.
What: /sys/bus/iio/devices/iio:deviceX/in_illuminance0_zone
Date: April 2012
KernelVersion: 3.5
Contact: Johan Hovold <jhovold@gmail.com>
Description:
Get the current light zone (0..4) as defined by the
in_illuminance0_threshY_{falling,rising} thresholds.
What: /sys/bus/iio/devices/iio:deviceX/out_currentY_raw
Date: May 2012
KernelVersion: 3.5
Contact: Johan Hovold <jhovold@gmail.com>
Description:
Get output current for channel Y (0..255), that is,
out_currentY_currentZ_raw, where Z is the current zone.
What: /sys/bus/iio/devices/iio:deviceX/out_currentY_currentZ_raw
Date: May 2012
KernelVersion: 3.5
Contact: Johan Hovold <jhovold@gmail.com>
Description:
Set the output current for channel out_currentY when in zone
Z (0..255), where Y in 0..2 and Z in 0..4.
These values correspond to the ALS-mapper target registers for
ALS-mapper Y + 1.
......@@ -210,3 +210,15 @@ Users:
firmware assigned instance number of the PCI
device that can help in understanding the firmware
intended order of the PCI device.
What: /sys/bus/pci/devices/.../d3cold_allowed
Date: July 2012
Contact: Huang Ying <ying.huang@intel.com>
Description:
d3cold_allowed is bit to control whether the corresponding PCI
device can be put into D3Cold state. If it is cleared, the
device will never be put into D3Cold state. If it is set, the
device may be put into D3Cold state if other requirements are
satisfied too. Reading this attribute will show the current
value of d3cold_allowed bit. Writing this attribute will set
the value of d3cold_allowed bit.
......@@ -35,8 +35,14 @@ name
pool
The pool where this rbd image resides. The pool-name pair is unique
per rados system.
The name of the storage pool where this rbd image resides.
An rbd image name is unique within its pool.
pool_id
The unique identifier for the rbd image's pool. This is
a permanent attribute of the pool. A pool's id will never
change.
size
......
......@@ -208,3 +208,22 @@ Description:
such as ACPI. This file will read either "removable" or
"fixed" if the information is available, and "unknown"
otherwise.
What: /sys/bus/usb/devices/.../ltm_capable
Date: July 2012
Contact: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Description:
USB 3.0 devices may optionally support Latency Tolerance
Messaging (LTM). They indicate their support by setting a bit
in the bmAttributes field of their SuperSpeed BOS descriptors.
If that bit is set for the device, ltm_capable will read "yes".
If the device doesn't support LTM, the file will read "no".
The file will be present for all speeds of USB devices, and will
always read "no" for USB 1.1 and USB 2.0 devices.
What: /sys/bus/usb/devices/.../(hub interface)/portX
Date: August 2012
Contact: Lan Tianyu <tianyu.lan@intel.com>
Description:
The /sys/bus/usb/devices/.../(hub interface)/portX
is usb port device's sysfs directory.
......@@ -40,4 +40,4 @@ Description: Controls the decimal places on the device.
the value of 10 ** n. Assume this field has
the value k and has 1 or more decimal places set,
to set the mth place (where m is not already set),
change this fields value to k + 10 ** m.
\ No newline at end of file
change this fields value to k + 10 ** m.
......@@ -53,4 +53,4 @@ Description:
Documentation/ABI/stable/sysfs-class-backlight.
It can be enabled by writing the value stored in
/sys/class/backlight/<backlight>/max_brightness to
/sys/class/backlight/<backlight>/brightness.
\ No newline at end of file
/sys/class/backlight/<backlight>/brightness.
......@@ -13,7 +13,7 @@ Description:
accessory cables have such capability. For example,
the 30-pin port of Nuri board (/arch/arm/mach-exynos)
may have both HDMI and Charger attached, or analog audio,
video, and USB cables attached simulteneously.
video, and USB cables attached simultaneously.
If there are cables mutually exclusive with each other,
such binary relations may be expressed with extcon_dev's
......@@ -35,7 +35,7 @@ Description:
The /sys/class/extcon/.../state shows and stores the cable
attach/detach information of the corresponding extcon object.
If the extcon object has an optional callback "show_state"
defined, the showing function is overriden with the optional
defined, the showing function is overridden with the optional
callback.
If the default callback for showing function is used, the
......@@ -46,19 +46,19 @@ Description:
TA=1
EAR_JACK=0
#
In this example, the extcon device have USB_OTG and TA
In this example, the extcon device has USB_OTG and TA
cables attached and HDMI and EAR_JACK cables detached.
In order to update the state of an extcon device, enter a hex
state number starting with 0x.
echo 0xHEX > state
state number starting with 0x:
# echo 0xHEX > state
This updates the whole state of the extcon dev.
This updates the whole state of the extcon device.
Inputs of all the methods are required to meet the
mutually_exclusive contidions if they exist.
mutually_exclusive conditions if they exist.
It is recommended to use this "global" state interface if
you need to enter the value atomically. The later state
you need to set the value atomically. The later state
interface associated with each cable cannot update
multiple cable states of an extcon device simultaneously.
......@@ -73,7 +73,7 @@ What: /sys/class/extcon/.../cable.x/state
Date: February 2012
Contact: MyungJoo Ham <myungjoo.ham@samsung.com>
Description:
The /sys/class/extcon/.../cable.x/name shows and stores the
The /sys/class/extcon/.../cable.x/state shows and stores the
state of cable "x" (integer between 0 and 31) of an extcon
device. The state value is either 0 (detached) or 1
(attached).
......@@ -83,8 +83,8 @@ Date: December 2011
Contact: MyungJoo Ham <myungjoo.ham@samsung.com>
Description:
Shows the relations of mutually exclusiveness. For example,
if the mutually_exclusive array of extcon_dev is
{0x3, 0x5, 0xC, 0x0}, the, the output is:
if the mutually_exclusive array of extcon device is
{0x3, 0x5, 0xC, 0x0}, then the output is:
# ls mutually_exclusive/
0x3
0x5
......
......@@ -349,3 +349,24 @@ Description:
This will be one of the same strings reported by
the "state" attribute.
What: /sys/class/regulator/.../bypass
Date: September 2012
KernelVersion: 3.7
Contact: Mark Brown <broonie@opensource.wolfsonmicro.com>
Description:
Some regulator directories will contain a field called
bypass. This indicates if the device is in bypass mode.
This will be one of the following strings:
'enabled'
'disabled'
'unknown'
'enabled' means the regulator is in bypass mode.
'disabled' means that the regulator is regulating.
'unknown' means software cannot determine the state, or
the reported state is invalid.
What: /sys/devices/system/edac/mc/mc*/reset_counters
Date: January 2006
Contact: linux-edac@vger.kernel.org
Description: This write-only control file will zero all the statistical
counters for UE and CE errors on the given memory controller.
Zeroing the counters will also reset the timer indicating how
long since the last counter were reset. This is useful for
computing errors/time. Since the counters are always reset
at driver initialization time, no module/kernel parameter
is available.
What: /sys/devices/system/edac/mc/mc*/seconds_since_reset
Date: January 2006
Contact: linux-edac@vger.kernel.org
Description: This attribute file displays how many seconds have elapsed
since the last counter reset. This can be used with the error
counters to measure error rates.
What: /sys/devices/system/edac/mc/mc*/mc_name
Date: January 2006
Contact: linux-edac@vger.kernel.org
Description: This attribute file displays the type of memory controller
that is being utilized.
What: /sys/devices/system/edac/mc/mc*/size_mb
Date: January 2006
Contact: linux-edac@vger.kernel.org
Description: This attribute file displays, in count of megabytes, of memory
that this memory controller manages.
What: /sys/devices/system/edac/mc/mc*/ue_count
Date: January 2006
Contact: linux-edac@vger.kernel.org
Description: This attribute file displays the total count of uncorrectable
errors that have occurred on this memory controller. If
panic_on_ue is set, this counter will not have a chance to
increment, since EDAC will panic the system
What: /sys/devices/system/edac/mc/mc*/ue_noinfo_count
Date: January 2006
Contact: linux-edac@vger.kernel.org
Description: This attribute file displays the number of UEs that have
occurred on this memory controller with no information as to
which DIMM slot is having errors.
What: /sys/devices/system/edac/mc/mc*/ce_count
Date: January 2006
Contact: linux-edac@vger.kernel.org
Description: This attribute file displays the total count of correctable
errors that have occurred on this memory controller. This
count is very important to examine. CEs provide early
indications that a DIMM is beginning to fail. This count
field should be monitored for non-zero values and report
such information to the system administrator.
What: /sys/devices/system/edac/mc/mc*/ce_noinfo_count
Date: January 2006
Contact: linux-edac@vger.kernel.org
Description: This attribute file displays the number of CEs that
have occurred on this memory controller wherewith no
information as to which DIMM slot is having errors. Memory is
handicapped, but operational, yet no information is available
to indicate which slot the failing memory is in. This count
field should be also be monitored for non-zero values.
What: /sys/devices/system/edac/mc/mc*/sdram_scrub_rate
Date: February 2007
Contact: linux-edac@vger.kernel.org
Description: Read/Write attribute file that controls memory scrubbing.
The scrubbing rate used by the memory controller is set by
writing a minimum bandwidth in bytes/sec to the attribute file.
The rate will be translated to an internal value that gives at
least the specified rate.
Reading the file will return the actual scrubbing rate employed.
If configuration fails or memory scrubbing is not implemented,
the value of the attribute file will be -1.
What: /sys/devices/system/edac/mc/mc*/max_location
Date: April 2012
Contact: Mauro Carvalho Chehab <mchehab@redhat.com>
linux-edac@vger.kernel.org
Description: This attribute file displays the information about the last
available memory slot in this memory controller. It is used by