Commit de4148f3 authored by Ralf Baechle's avatar Ralf Baechle
Browse files

MIPS: eXcite: Remove platform.



The platform has never been fully merged 
Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
Cc: Thomas Koeller <thomas.koeller@baslerweb.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Wim Van Sebroeck <wim@iguana.be>
Cc: linux-kernel@vger.kernel.org
Cc: linux-mtd@lists.infradead.org
Acked-by: default avatarDavid Woodhouse <David.Woodhouse@intel.com>
Acked-by: default avatarWim Van Sebroeck <wim@iguana.be>
parent c3d8d850
......@@ -50,23 +50,6 @@ config AR7
Support for the Texas Instruments AR7 System-on-a-Chip
family: TNETD7100, 7200 and 7300.
config BASLER_EXCITE
bool "Basler eXcite smart camera"
select CEVT_R4K
select CSRC_R4K
select DMA_COHERENT
select HW_HAS_PCI
select IRQ_CPU
select IRQ_CPU_RM7K
select IRQ_CPU_RM9K
select MIPS_RM9122
select SYS_HAS_CPU_RM9000
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
help
The eXcite is a smart camera platform manufactured by
Basler Vision Technologies AG.
config BCM47XX
bool "BCM47XX based boards"
select CEVT_R4K
......@@ -701,7 +684,6 @@ config CAVIUM_OCTEON_REFERENCE_BOARD
endchoice
source "arch/mips/alchemy/Kconfig"
source "arch/mips/basler/excite/Kconfig"
source "arch/mips/bcm63xx/Kconfig"
source "arch/mips/jazz/Kconfig"
source "arch/mips/lasat/Kconfig"
......
......@@ -368,13 +368,6 @@ core-$(CONFIG_PMC_YOSEMITE) += arch/mips/pmc-sierra/yosemite/
cflags-$(CONFIG_PMC_YOSEMITE) += -I$(srctree)/arch/mips/include/asm/mach-yosemite
load-$(CONFIG_PMC_YOSEMITE) += 0xffffffff80100000
#
# Basler eXcite
#
core-$(CONFIG_BASLER_EXCITE) += arch/mips/basler/excite/
cflags-$(CONFIG_BASLER_EXCITE) += -I$(srctree)/arch/mips/include/asm/mach-excite
load-$(CONFIG_BASLER_EXCITE) += 0x80100000
#
# LASAT platforms
#
......
config BASLER_EXCITE_PROTOTYPE
bool "Support for pre-release units"
depends on BASLER_EXCITE
default n
help
Pre-series (prototype) units are different from later ones in
some ways. Select this option if you have one of these. Please
note that a kernel built with this option selected will not be
able to run on normal units.
#
# Makefile for Basler eXcite
#
obj-$(CONFIG_BASLER_EXCITE) += excite_irq.o excite_prom.o excite_setup.o \
excite_device.o excite_procfs.o
obj-m += excite_iodev.o
/*
* Copyright (C) 2004 by Basler Vision Technologies AG
* Author: Thomas Koeller <thomas.koeller@baslerweb.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/ioport.h>
#include <linux/err.h>
#include <linux/jiffies.h>
#include <linux/sched.h>
#include <asm/types.h>
#include <asm/rm9k-ocd.h>
#include <excite.h>
#include <rm9k_eth.h>
#include <rm9k_wdt.h>
#include <rm9k_xicap.h>
#include <excite_nandflash.h>
#include "excite_iodev.h"
#define RM9K_GE_UNIT 0
#define XICAP_UNIT 0
#define NAND_UNIT 0
#define DLL_TIMEOUT 3 /* seconds */
#define RINIT(__start__, __end__, __name__, __parent__) { \
.name = __name__ "_0", \
.start = (__start__), \
.end = (__end__), \
.flags = 0, \
.parent = (__parent__) \
}
#define RINIT_IRQ(__irq__, __name__) { \
.name = __name__ "_0", \
.start = (__irq__), \
.end = (__irq__), \
.flags = IORESOURCE_IRQ, \
.parent = NULL \
}
enum {
slice_xicap,
slice_eth
};
static struct resource
excite_ctr_resource __maybe_unused = {
.name = "GPI counters",
.start = 0,
.end = 5,
.flags = 0,
.parent = NULL,
.sibling = NULL,
.child = NULL
},
excite_gpislice_resource __maybe_unused = {
.name = "GPI slices",
.start = 0,
.end = 1,
.flags = 0,
.parent = NULL,
.sibling = NULL,
.child = NULL
},
excite_mdio_channel_resource __maybe_unused = {
.name = "MDIO channels",
.start = 0,
.end = 1,
.flags = 0,
.parent = NULL,
.sibling = NULL,
.child = NULL
},
excite_fifomem_resource __maybe_unused = {
.name = "FIFO memory",
.start = 0,
.end = 767,
.flags = 0,
.parent = NULL,
.sibling = NULL,
.child = NULL
},
excite_scram_resource __maybe_unused = {
.name = "Scratch RAM",
.start = EXCITE_PHYS_SCRAM,
.end = EXCITE_PHYS_SCRAM + EXCITE_SIZE_SCRAM - 1,
.flags = IORESOURCE_MEM,
.parent = NULL,
.sibling = NULL,
.child = NULL
},
excite_fpga_resource __maybe_unused = {
.name = "System FPGA",
.start = EXCITE_PHYS_FPGA,
.end = EXCITE_PHYS_FPGA + EXCITE_SIZE_FPGA - 1,
.flags = IORESOURCE_MEM,
.parent = NULL,
.sibling = NULL,
.child = NULL
},
excite_nand_resource __maybe_unused = {
.name = "NAND flash control",
.start = EXCITE_PHYS_NAND,
.end = EXCITE_PHYS_NAND + EXCITE_SIZE_NAND - 1,
.flags = IORESOURCE_MEM,
.parent = NULL,
.sibling = NULL,
.child = NULL
},
excite_titan_resource __maybe_unused = {
.name = "TITAN registers",
.start = EXCITE_PHYS_TITAN,
.end = EXCITE_PHYS_TITAN + EXCITE_SIZE_TITAN - 1,
.flags = IORESOURCE_MEM,
.parent = NULL,
.sibling = NULL,
.child = NULL
};
static void adjust_resources(struct resource *res, unsigned int n)
{
struct resource *p;
const unsigned long mask = IORESOURCE_IO | IORESOURCE_MEM
| IORESOURCE_IRQ | IORESOURCE_DMA;
for (p = res; p < res + n; p++) {
const struct resource * const parent = p->parent;
if (parent) {
p->start += parent->start;
p->end += parent->start;
p->flags = parent->flags & mask;
}
}
}
#if defined(CONFIG_EXCITE_FCAP_GPI) || defined(CONFIG_EXCITE_FCAP_GPI_MODULE)
static struct resource xicap_rsrc[] = {
RINIT(0x4840, 0x486f, XICAP_RESOURCE_FIFO_RX, &excite_titan_resource),
RINIT(0x4940, 0x494b, XICAP_RESOURCE_FIFO_TX, &excite_titan_resource),
RINIT(0x5040, 0x5127, XICAP_RESOURCE_XDMA, &excite_titan_resource),
RINIT(0x1000, 0x112f, XICAP_RESOURCE_PKTPROC, &excite_titan_resource),
RINIT(0x1100, 0x110f, XICAP_RESOURCE_PKT_STREAM, &excite_fpga_resource),
RINIT(0x0800, 0x0bff, XICAP_RESOURCE_DMADESC, &excite_scram_resource),
RINIT(slice_xicap, slice_xicap, XICAP_RESOURCE_GPI_SLICE, &excite_gpislice_resource),
RINIT(0x0100, 0x02ff, XICAP_RESOURCE_FIFO_BLK, &excite_fifomem_resource),
RINIT_IRQ(TITAN_IRQ, XICAP_RESOURCE_IRQ)
};
static struct platform_device xicap_pdev = {
.name = XICAP_NAME,
.id = XICAP_UNIT,
.num_resources = ARRAY_SIZE(xicap_rsrc),
.resource = xicap_rsrc
};
/*
* Create a platform device for the GPI port that receives the
* image data from the embedded camera.
*/
static int __init xicap_devinit(void)
{
unsigned long tend;
u32 reg;
int retval;
adjust_resources(xicap_rsrc, ARRAY_SIZE(xicap_rsrc));
/* Power up the slice and configure it. */
reg = titan_readl(CPTC1R);
reg &= ~(0x11100 << slice_xicap);
titan_writel(reg, CPTC1R);
/* Enable slice & DLL. */
reg= titan_readl(CPRR);
reg &= ~(0x00030003 << (slice_xicap * 2));
titan_writel(reg, CPRR);
/* Wait for DLLs to lock */
tend = jiffies + DLL_TIMEOUT * HZ;
while (time_before(jiffies, tend)) {
if (!(~titan_readl(CPDSR) & (0x1 << (slice_xicap * 4))))
break;
yield();
}
if (~titan_readl(CPDSR) & (0x1 << (slice_xicap * 4))) {
printk(KERN_ERR "%s: DLL not locked after %u seconds\n",
xicap_pdev.name, DLL_TIMEOUT);
retval = -ETIME;
} else {
/* Register platform device */
retval = platform_device_register(&xicap_pdev);
}
return retval;
}
device_initcall(xicap_devinit);
#endif /* defined(CONFIG_EXCITE_FCAP_GPI) || defined(CONFIG_EXCITE_FCAP_GPI_MODULE) */
#if defined(CONFIG_WDT_RM9K_GPI) || defined(CONFIG_WDT_RM9K_GPI_MODULE)
static struct resource wdt_rsrc[] = {
RINIT(0, 0, WDT_RESOURCE_COUNTER, &excite_ctr_resource),
RINIT(0x0084, 0x008f, WDT_RESOURCE_REGS, &excite_titan_resource),
RINIT_IRQ(TITAN_IRQ, WDT_RESOURCE_IRQ)
};
static struct platform_device wdt_pdev = {
.name = WDT_NAME,
.id = -1,
.num_resources = ARRAY_SIZE(wdt_rsrc),
.resource = wdt_rsrc
};
/*
* Create a platform device for the GPI port that receives the
* image data from the embedded camera.
*/
static int __init wdt_devinit(void)
{
adjust_resources(wdt_rsrc, ARRAY_SIZE(wdt_rsrc));
return platform_device_register(&wdt_pdev);
}
device_initcall(wdt_devinit);
#endif /* defined(CONFIG_WDT_RM9K_GPI) || defined(CONFIG_WDT_RM9K_GPI_MODULE) */
static struct resource excite_nandflash_rsrc[] = {
RINIT(0x2000, 0x201f, EXCITE_NANDFLASH_RESOURCE_REGS, &excite_nand_resource)
};
static struct platform_device excite_nandflash_pdev = {
.name = "excite_nand",
.id = NAND_UNIT,
.num_resources = ARRAY_SIZE(excite_nandflash_rsrc),
.resource = excite_nandflash_rsrc
};
/*
* Create a platform device for the access to the nand-flash
* port
*/
static int __init excite_nandflash_devinit(void)
{
adjust_resources(excite_nandflash_rsrc, ARRAY_SIZE(excite_nandflash_rsrc));
/* nothing to be done here */
/* Register platform device */
return platform_device_register(&excite_nandflash_pdev);
}
device_initcall(excite_nandflash_devinit);
static struct resource iodev_rsrc[] = {
RINIT_IRQ(FPGA1_IRQ, IODEV_RESOURCE_IRQ)
};
static struct platform_device io_pdev = {
.name = IODEV_NAME,
.id = -1,
.num_resources = ARRAY_SIZE(iodev_rsrc),
.resource = iodev_rsrc
};
/*
* Create a platform device for the external I/O ports.
*/
static int __init io_devinit(void)
{
adjust_resources(iodev_rsrc, ARRAY_SIZE(iodev_rsrc));
return platform_device_register(&io_pdev);
}
device_initcall(io_devinit);
#if defined(CONFIG_RM9K_GE) || defined(CONFIG_RM9K_GE_MODULE)
static struct resource rm9k_ge_rsrc[] = {
RINIT(0x2200, 0x27ff, RM9K_GE_RESOURCE_MAC, &excite_titan_resource),
RINIT(0x1800, 0x1fff, RM9K_GE_RESOURCE_MSTAT, &excite_titan_resource),
RINIT(0x2000, 0x212f, RM9K_GE_RESOURCE_PKTPROC, &excite_titan_resource),
RINIT(0x5140, 0x5227, RM9K_GE_RESOURCE_XDMA, &excite_titan_resource),
RINIT(0x4870, 0x489f, RM9K_GE_RESOURCE_FIFO_RX, &excite_titan_resource),
RINIT(0x494c, 0x4957, RM9K_GE_RESOURCE_FIFO_TX, &excite_titan_resource),
RINIT(0x0000, 0x007f, RM9K_GE_RESOURCE_FIFOMEM_RX, &excite_fifomem_resource),
RINIT(0x0080, 0x00ff, RM9K_GE_RESOURCE_FIFOMEM_TX, &excite_fifomem_resource),
RINIT(0x0180, 0x019f, RM9K_GE_RESOURCE_PHY, &excite_titan_resource),
RINIT(0x0000, 0x03ff, RM9K_GE_RESOURCE_DMADESC_RX, &excite_scram_resource),
RINIT(0x0400, 0x07ff, RM9K_GE_RESOURCE_DMADESC_TX, &excite_scram_resource),
RINIT(slice_eth, slice_eth, RM9K_GE_RESOURCE_GPI_SLICE, &excite_gpislice_resource),
RINIT(0, 0, RM9K_GE_RESOURCE_MDIO_CHANNEL, &excite_mdio_channel_resource),
RINIT_IRQ(TITAN_IRQ, RM9K_GE_RESOURCE_IRQ_MAIN),
RINIT_IRQ(PHY_IRQ, RM9K_GE_RESOURCE_IRQ_PHY)
};
static struct platform_device rm9k_ge_pdev = {
.name = RM9K_GE_NAME,
.id = RM9K_GE_UNIT,
.num_resources = ARRAY_SIZE(rm9k_ge_rsrc),
.resource = rm9k_ge_rsrc
};
/*
* Create a platform device for the Ethernet port.
*/
static int __init rm9k_ge_devinit(void)
{
u32 reg;
adjust_resources(rm9k_ge_rsrc, ARRAY_SIZE(rm9k_ge_rsrc));
/* Power up the slice and configure it. */
reg = titan_readl(CPTC1R);
reg &= ~(0x11000 << slice_eth);
reg |= 0x100 << slice_eth;
titan_writel(reg, CPTC1R);
/* Take the MAC out of reset, reset the DLLs. */
reg = titan_readl(CPRR);
reg &= ~(0x00030000 << (slice_eth * 2));
reg |= 0x3 << (slice_eth * 2);
titan_writel(reg, CPRR);
return platform_device_register(&rm9k_ge_pdev);
}
device_initcall(rm9k_ge_devinit);
#endif /* defined(CONFIG_RM9K_GE) || defined(CONFIG_RM9K_GE_MODULE) */
static int __init excite_setup_devs(void)
{
int res;
u32 reg;
/* Enable xdma and fifo interrupts */
reg = titan_readl(0x0050);
titan_writel(reg | 0x18000000, 0x0050);
res = request_resource(&iomem_resource, &excite_titan_resource);
if (res)
return res;
res = request_resource(&iomem_resource, &excite_scram_resource);
if (res)
return res;
res = request_resource(&iomem_resource, &excite_fpga_resource);
if (res)
return res;
res = request_resource(&iomem_resource, &excite_nand_resource);
if (res)
return res;
excite_fpga_resource.flags = excite_fpga_resource.parent->flags &
( IORESOURCE_IO | IORESOURCE_MEM
| IORESOURCE_IRQ | IORESOURCE_DMA);
excite_nand_resource.flags = excite_nand_resource.parent->flags &
( IORESOURCE_IO | IORESOURCE_MEM
| IORESOURCE_IRQ | IORESOURCE_DMA);
return 0;
}
arch_initcall(excite_setup_devs);
/*
* Copyright (C) 2005 by Basler Vision Technologies AG
* Author: Thomas Koeller <thomas.koeller@baslerweb.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/compiler.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/sched.h>
#include <linux/wait.h>
#include <linux/poll.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/miscdevice.h>
#include <linux/smp_lock.h>
#include "excite_iodev.h"
static const struct resource *iodev_get_resource(struct platform_device *, const char *, unsigned int);
static int __init iodev_probe(struct platform_device *);
static int __devexit iodev_remove(struct platform_device *);
static int iodev_open(struct inode *, struct file *);
static int iodev_release(struct inode *, struct file *);
static ssize_t iodev_read(struct file *, char __user *, size_t s, loff_t *);
static unsigned int iodev_poll(struct file *, struct poll_table_struct *);
static irqreturn_t iodev_irqhdl(int, void *);
static const char iodev_name[] = "iodev";
static unsigned int iodev_irq;
static DECLARE_WAIT_QUEUE_HEAD(wq);
static const struct file_operations fops =
{
.owner = THIS_MODULE,
.open = iodev_open,
.release = iodev_release,
.read = iodev_read,
.poll = iodev_poll
};
static struct miscdevice miscdev =
{
.minor = MISC_DYNAMIC_MINOR,
.name = iodev_name,
.fops = &fops
};
static struct platform_driver iodev_driver = {
.driver = {
.name = iodev_name,
.owner = THIS_MODULE,
},
.probe = iodev_probe,
.remove = __devexit_p(iodev_remove),
};
static const struct resource *
iodev_get_resource(struct platform_device *pdv, const char *name,
unsigned int type)
{
char buf[80];
if (snprintf(buf, sizeof buf, "%s_0", name) >= sizeof buf)
return NULL;
return platform_get_resource_byname(pdv, type, buf);
}
/* No hotplugging on the platform bus - use __init */
static int __init iodev_probe(struct platform_device *dev)
{
const struct resource * const ri =
iodev_get_resource(dev, IODEV_RESOURCE_IRQ, IORESOURCE_IRQ);
if (unlikely(!ri))
return -ENXIO;
iodev_irq = ri->start;
return misc_register(&miscdev);
}
static int __devexit iodev_remove(struct platform_device *dev)
{
return misc_deregister(&miscdev);
}
static int iodev_open(struct inode *i, struct file *f)
{
int ret;
ret = request_irq(iodev_irq, iodev_irqhdl, IRQF_DISABLED,
iodev_name, &miscdev);
return ret;
}
static int iodev_release(struct inode *i, struct file *f)
{
free_irq(iodev_irq, &miscdev);
return 0;
}
static ssize_t
iodev_read(struct file *f, char __user *d, size_t s, loff_t *o)
{
ssize_t ret;
DEFINE_WAIT(w);
prepare_to_wait(&wq, &w, TASK_INTERRUPTIBLE);
if (!signal_pending(current))
schedule();
ret = signal_pending(current) ? -ERESTARTSYS : 0;