Commit dde96ca8 authored by Ralf Baechle's avatar Ralf Baechle
Browse files

[MIPS] Use -Werror on subdirectories which build cleanly.


Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
parent e9c227f9
......@@ -12,3 +12,5 @@ obj-y += prom.o irq.o puts.o time.o reset.o \
obj-$(CONFIG_KGDB) += dbg_io.o
obj-$(CONFIG_PCI) += pci.o
EXTRA_CFLAGS += -Werror
......@@ -7,3 +7,5 @@ obj-y := buttons.o irq.o reset.o rtc.o serial.o setup.o
obj-$(CONFIG_PCI) += pci.o
obj-$(CONFIG_EARLY_PRINTK) += console.o
obj-$(CONFIG_MTD_PHYSMAP) += mtd.o
EXTRA_CFLAGS += -Werror
......@@ -3,3 +3,5 @@
#
obj-y += nile4.o prom.o rtc_ds1386.o
EXTRA_CFLAGS += -Werror
......@@ -7,3 +7,5 @@ obj-y += ddb5477-platform.o irq.o irq_5477.o setup.o \
obj-$(CONFIG_RUNTIME_DEBUG) += debug.o
obj-$(CONFIG_KGDB) += kgdb_io.o
EXTRA_CFLAGS += -Werror
......@@ -8,3 +8,5 @@ obj-y := ecc-berr.o int-handler.o ioasic-irq.o kn01-berr.o \
obj-$(CONFIG_PROM_CONSOLE) += promcon.o
obj-$(CONFIG_TC) += tc.o
obj-$(CONFIG_CPU_HAS_WB) += wbflush.o
EXTRA_CFLAGS += -Werror
......@@ -10,3 +10,5 @@
#
obj-y += irq.o reset.o setup.o time.o pci.o
EXTRA_CFLAGS += -Werror
......@@ -3,3 +3,5 @@
#
obj-y := irq.o jazzdma.o jazz-platform.o reset.o setup.o
EXTRA_CFLAGS += -Werror
......@@ -3,3 +3,5 @@
#
obj-y += prom.o puts.o
EXTRA_CFLAGS += -Werror
......@@ -4,3 +4,5 @@
obj-y += init.o irq.o setup.o
obj-$(CONFIG_KGDB) += kgdb_io.o
EXTRA_CFLAGS += -Werror
......@@ -71,3 +71,5 @@ obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
CFLAGS_cpu-bugs64.o = $(shell if $(CC) $(CFLAGS) -Wa,-mdaddi -c -o /dev/null -xc /dev/null >/dev/null 2>&1; then echo "-DHAVE_AS_SET_DADDI"; fi)
obj-$(CONFIG_HAVE_STD_PC_SERIAL_PORT) += 8250-platform.o
EXTRA_CFLAGS += -Werror
......@@ -3,5 +3,6 @@
#
obj-y += setup.o prom.o reset.o irq.o pci.o bonito-irq.o dbg_io.o mem.o
EXTRA_AFLAGS := $(CFLAGS)
EXTRA_AFLAGS := $(CFLAGS)
EXTRA_CFLAGS += -Werror
......@@ -9,3 +9,5 @@ obj-y := cp1emu.o ieee754m.o ieee754d.o ieee754dp.o ieee754sp.o ieee754.o \
sp_div.o sp_mul.o sp_sub.o sp_add.o sp_fdp.o sp_cmp.o sp_logb.o \
sp_scalb.o sp_simple.o sp_tint.o sp_fint.o sp_tlong.o sp_flong.o \
dp_sqrt.o sp_sqrt.o kernel_linkage.o dsemul.o
EXTRA_CFLAGS += -Werror
......@@ -18,3 +18,5 @@
obj-y := atlas_int.o atlas_setup.o
obj-$(CONFIG_KGDB) += atlas_gdb.o
EXTRA_CFLAGS += -Werror
......@@ -24,3 +24,5 @@ obj-y := reset.o display.o init.o memory.o \
obj-$(CONFIG_EARLY_PRINTK) += console.o
obj-$(CONFIG_PCI) += pci.o
obj-$(CONFIG_KGDB) += gdb_hook.o
EXTRA_CFLAGS += -Werror
......@@ -23,3 +23,5 @@ obj-y := malta_int.o malta_platform.o malta_setup.o
obj-$(CONFIG_MTD) += malta_mtd.o
obj-$(CONFIG_MIPS_MT_SMTC) += malta_smtc.o
EXTRA_CFLAGS += -Werror
......@@ -24,3 +24,5 @@
#
obj-y := sead_int.o sead_setup.o
EXTRA_CFLAGS += -Werror
......@@ -22,3 +22,5 @@ obj-y := sim_platform.o sim_setup.o sim_mem.o sim_time.o sim_int.o \
obj-$(CONFIG_EARLY_PRINTK) += sim_console.o
obj-$(CONFIG_SMP) += sim_smp.o
EXTRA_CFLAGS += -Werror
......@@ -32,3 +32,5 @@ obj-$(CONFIG_IP22_CPU_SCACHE) += sc-ip22.o
obj-$(CONFIG_R5000_CPU_SCACHE) += sc-r5k.o
obj-$(CONFIG_RM7000_CPU_SCACHE) += sc-rm7k.o
obj-$(CONFIG_MIPS_CPU_SCACHE) += sc-mips.o
EXTRA_CFLAGS += -Werror
......@@ -25,3 +25,5 @@
obj-y := setup.o prom.o int.o reset.o time.o proc.o platform.o
obj-$(CONFIG_PCI) += pci.o
obj-$(CONFIG_KGDB) += gdb_hook.o
EXTRA_CFLAGS += -Werror
......@@ -5,3 +5,5 @@
obj-y = q-firmware.o q-irq.o q-mem.o q-setup.o q-reset.o
obj-$(CONFIG_SMP) += q-smp.o
EXTRA_CFLAGS += -Werror
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment