Commit dd89ccb2 authored by Eric Miao's avatar Eric Miao Committed by Russell King
Browse files

lcd: add support for Toppoly TDO24M series LCD panels



This type of LCD panel can be found on PXA3xx/Littleton platforms.
Add LCD device and SPI-based driver for this.
Signed-off-by: default avatarEric Miao <eric.miao@marvell.com>
Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
parent bfdcaa3b
......@@ -51,6 +51,14 @@ config LCD_ILI9320
If you have a panel based on the ILI9320 controller chip
then say y to include a power driver for it.
config LCD_TDO24M
tristate "Toppoly TDO24M LCD Panels support"
depends on LCD_CLASS_DEVICE && SPI_MASTER
default n
help
If you have a Toppoly TDO24M series LCD panel, say y here to
include the support for it.
config LCD_VGG2432A4
tristate "VGG2432A4 LCM device support"
depends on BACKLIGHT_LCD_SUPPORT && LCD_CLASS_DEVICE && SPI_MASTER
......
......@@ -6,6 +6,7 @@ obj-$(CONFIG_LCD_LTV350QV) += ltv350qv.o
obj-$(CONFIG_LCD_ILI9320) += ili9320.o
obj-$(CONFIG_LCD_PLATFORM) += platform_lcd.o
obj-$(CONFIG_LCD_VGG2432A4) += vgg2432a4.o
obj-$(CONFIG_LCD_TDO24M) += tdo24m.o
obj-$(CONFIG_BACKLIGHT_CLASS_DEVICE) += backlight.o
obj-$(CONFIG_BACKLIGHT_ATMEL_PWM) += atmel-pwm-bl.o
......
/*
* tdo24m - SPI-based drivers for Toppoly TDO24M series LCD panels
*
* Copyright (C) 2008 Marvell International Ltd.
* Eric Miao <eric.miao@marvell.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* publishhed by the Free Software Foundation.
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/device.h>
#include <linux/spi/spi.h>
#include <linux/fb.h>
#include <linux/lcd.h>
#define POWER_IS_ON(pwr) ((pwr) <= FB_BLANK_NORMAL)
#define TDO24M_SPI_BUFF_SIZE (4)
#define MODE_QVGA 0
#define MODE_VGA 1
struct tdo24m {
struct spi_device *spi_dev;
struct lcd_device *lcd_dev;
struct spi_message msg;
struct spi_transfer xfer;
uint8_t *buf;
int power;
int mode;
};
/* use bit 30, 31 as the indicator of command parameter number */
#define CMD0(x) ((0 << 30) | (x))
#define CMD1(x, x1) ((1 << 30) | ((x) << 9) | 0x100 | (x1))
#define CMD2(x, x1, x2) ((2 << 30) | ((x) << 18) | 0x20000 |\
((x1) << 9) | 0x100 | (x2))
#define CMD_NULL (-1)
static uint32_t lcd_panel_reset[] = {
CMD0(0x1), /* reset */
CMD0(0x0), /* nop */
CMD0(0x0), /* nop */
CMD0(0x0), /* nop */
CMD_NULL,
};
static uint32_t lcd_panel_on[] = {
CMD0(0x29), /* Display ON */
CMD2(0xB8, 0xFF, 0xF9), /* Output Control */
CMD0(0x11), /* Sleep out */
CMD1(0xB0, 0x16), /* Wake */
CMD_NULL,
};
static uint32_t lcd_panel_off[] = {
CMD0(0x28), /* Display OFF */
CMD2(0xB8, 0x80, 0x02), /* Output Control */
CMD0(0x10), /* Sleep in */
CMD1(0xB0, 0x00), /* Deep stand by in */
CMD_NULL,
};
static uint32_t lcd_vga_pass_through[] = {
CMD1(0xB0, 0x16),
CMD1(0xBC, 0x80),
CMD1(0xE1, 0x00),
CMD1(0x36, 0x50),
CMD1(0x3B, 0x00),
CMD_NULL,
};
static uint32_t lcd_qvga_pass_through[] = {
CMD1(0xB0, 0x16),
CMD1(0xBC, 0x81),
CMD1(0xE1, 0x00),
CMD1(0x36, 0x50),
CMD1(0x3B, 0x22),
CMD_NULL,
};
static uint32_t lcd_vga_transfer[] = {
CMD1(0xcf, 0x02), /* Blanking period control (1) */
CMD2(0xd0, 0x08, 0x04), /* Blanking period control (2) */
CMD1(0xd1, 0x01), /* CKV timing control on/off */
CMD2(0xd2, 0x14, 0x00), /* CKV 1,2 timing control */
CMD2(0xd3, 0x1a, 0x0f), /* OEV timing control */
CMD2(0xd4, 0x1f, 0xaf), /* ASW timing control (1) */
CMD1(0xd5, 0x14), /* ASW timing control (2) */
CMD0(0x21), /* Invert for normally black display */
CMD0(0x29), /* Display on */
CMD_NULL,
};
static uint32_t lcd_qvga_transfer[] = {
CMD1(0xd6, 0x02), /* Blanking period control (1) */
CMD2(0xd7, 0x08, 0x04), /* Blanking period control (2) */
CMD1(0xd8, 0x01), /* CKV timing control on/off */
CMD2(0xd9, 0x00, 0x08), /* CKV 1,2 timing control */
CMD2(0xde, 0x05, 0x0a), /* OEV timing control */
CMD2(0xdf, 0x0a, 0x19), /* ASW timing control (1) */
CMD1(0xe0, 0x0a), /* ASW timing control (2) */
CMD0(0x21), /* Invert for normally black display */
CMD0(0x29), /* Display on */
CMD_NULL,
};
static uint32_t lcd_panel_config[] = {
CMD2(0xb8, 0xff, 0xf9), /* Output control */
CMD0(0x11), /* sleep out */
CMD1(0xba, 0x01), /* Display mode (1) */
CMD1(0xbb, 0x00), /* Display mode (2) */
CMD1(0x3a, 0x60), /* Display mode 18-bit RGB */
CMD1(0xbf, 0x10), /* Drive system change control */
CMD1(0xb1, 0x56), /* Booster operation setup */
CMD1(0xb2, 0x33), /* Booster mode setup */
CMD1(0xb3, 0x11), /* Booster frequency setup */
CMD1(0xb4, 0x02), /* Op amp/system clock */
CMD1(0xb5, 0x35), /* VCS voltage */
CMD1(0xb6, 0x40), /* VCOM voltage */
CMD1(0xb7, 0x03), /* External display signal */
CMD1(0xbd, 0x00), /* ASW slew rate */
CMD1(0xbe, 0x00), /* Dummy data for QuadData operation */
CMD1(0xc0, 0x11), /* Sleep out FR count (A) */
CMD1(0xc1, 0x11), /* Sleep out FR count (B) */
CMD1(0xc2, 0x11), /* Sleep out FR count (C) */
CMD2(0xc3, 0x20, 0x40), /* Sleep out FR count (D) */
CMD2(0xc4, 0x60, 0xc0), /* Sleep out FR count (E) */
CMD2(0xc5, 0x10, 0x20), /* Sleep out FR count (F) */
CMD1(0xc6, 0xc0), /* Sleep out FR count (G) */
CMD2(0xc7, 0x33, 0x43), /* Gamma 1 fine tuning (1) */
CMD1(0xc8, 0x44), /* Gamma 1 fine tuning (2) */
CMD1(0xc9, 0x33), /* Gamma 1 inclination adjustment */
CMD1(0xca, 0x00), /* Gamma 1 blue offset adjustment */
CMD2(0xec, 0x01, 0xf0), /* Horizontal clock cycles */
CMD_NULL,
};
static int tdo24m_writes(struct tdo24m *lcd, uint32_t *array)
{
struct spi_transfer *x = &lcd->xfer;
uint32_t data, *p = array;
int nparams, err = 0;
for (; *p != CMD_NULL; p++) {
nparams = (*p >> 30) & 0x3;
data = *p << (7 - nparams);
switch (nparams) {
case 0:
lcd->buf[0] = (data >> 8) & 0xff;
lcd->buf[1] = data & 0xff;
break;
case 1:
lcd->buf[0] = (data >> 16) & 0xff;
lcd->buf[1] = (data >> 8) & 0xff;
lcd->buf[2] = data & 0xff;
break;
case 2:
lcd->buf[0] = (data >> 24) & 0xff;
lcd->buf[1] = (data >> 16) & 0xff;
lcd->buf[2] = (data >> 8) & 0xff;
lcd->buf[3] = data & 0xff;
break;
default:
continue;
}
x->len = nparams + 2;
err = spi_sync(lcd->spi_dev, &lcd->msg);
if (err)
break;
}
return err;
}
static int tdo24m_adj_mode(struct tdo24m *lcd, int mode)
{
switch (mode) {
case MODE_VGA:
tdo24m_writes(lcd, lcd_vga_pass_through);
tdo24m_writes(lcd, lcd_panel_config);
tdo24m_writes(lcd, lcd_vga_transfer);
break;
case MODE_QVGA:
tdo24m_writes(lcd, lcd_qvga_pass_through);
tdo24m_writes(lcd, lcd_panel_config);
tdo24m_writes(lcd, lcd_qvga_transfer);
break;
default:
return -EINVAL;
}
lcd->mode = mode;
return 0;
}
static int tdo24m_power_on(struct tdo24m *lcd)
{
int err;
err = tdo24m_writes(lcd, lcd_panel_on);
if (err)
goto out;
err = tdo24m_writes(lcd, lcd_panel_reset);
if (err)
goto out;
err = tdo24m_adj_mode(lcd, lcd->mode);
out:
return err;
}
static int tdo24m_power_off(struct tdo24m *lcd)
{
return tdo24m_writes(lcd, lcd_panel_off);
}
static int tdo24m_power(struct tdo24m *lcd, int power)
{
int ret = 0;
if (POWER_IS_ON(power) && !POWER_IS_ON(lcd->power))
ret = tdo24m_power_on(lcd);
else if (!POWER_IS_ON(power) && POWER_IS_ON(lcd->power))
ret = tdo24m_power_off(lcd);
if (!ret)
lcd->power = power;
return ret;
}
static int tdo24m_set_power(struct lcd_device *ld, int power)
{
struct tdo24m *lcd = lcd_get_data(ld);
return tdo24m_power(lcd, power);
}
static int tdo24m_get_power(struct lcd_device *ld)
{
struct tdo24m *lcd = lcd_get_data(ld);
return lcd->power;
}
static int tdo24m_set_mode(struct lcd_device *ld, struct fb_videomode *m)
{
struct tdo24m *lcd = lcd_get_data(ld);
int mode = MODE_QVGA;
if (m->xres == 640 || m->xres == 480)
mode = MODE_VGA;
if (lcd->mode == mode)
return 0;
return tdo24m_adj_mode(lcd, mode);
}
static struct lcd_ops tdo24m_ops = {
.get_power = tdo24m_get_power,
.set_power = tdo24m_set_power,
.set_mode = tdo24m_set_mode,
};
static int __devinit tdo24m_probe(struct spi_device *spi)
{
struct tdo24m *lcd;
struct spi_message *m;
struct spi_transfer *x;
int err;
spi->bits_per_word = 8;
spi->mode = SPI_MODE_3;
err = spi_setup(spi);
if (err)
return err;
lcd = kzalloc(sizeof(struct tdo24m), GFP_KERNEL);
if (!lcd)
return -ENOMEM;
lcd->spi_dev = spi;
lcd->power = FB_BLANK_POWERDOWN;
lcd->mode = MODE_VGA; /* default to VGA */
lcd->buf = kmalloc(TDO24M_SPI_BUFF_SIZE, sizeof(GFP_KERNEL));
if (lcd->buf == NULL) {
kfree(lcd);
return -ENOMEM;
}
m = &lcd->msg;
x = &lcd->xfer;
spi_message_init(m);
x->tx_buf = &lcd->buf[0];
spi_message_add_tail(x, m);
lcd->lcd_dev = lcd_device_register("tdo24m", &spi->dev,
lcd, &tdo24m_ops);
if (IS_ERR(lcd->lcd_dev)) {
err = PTR_ERR(lcd->lcd_dev);
goto out_free;
}
dev_set_drvdata(&spi->dev, lcd);
err = tdo24m_power(lcd, FB_BLANK_UNBLANK);
if (err)
goto out_unregister;
return 0;
out_unregister:
lcd_device_unregister(lcd->lcd_dev);
out_free:
kfree(lcd->buf);
kfree(lcd);
return err;
}
static int __devexit tdo24m_remove(struct spi_device *spi)
{
struct tdo24m *lcd = dev_get_drvdata(&spi->dev);
tdo24m_power(lcd, FB_BLANK_POWERDOWN);
lcd_device_unregister(lcd->lcd_dev);
kfree(lcd->buf);
kfree(lcd);
return 0;
}
#ifdef CONFIG_PM
static int tdo24m_suspend(struct spi_device *spi, pm_message_t state)
{
struct tdo24m *lcd = dev_get_drvdata(&spi->dev);
return tdo24m_power(lcd, FB_BLANK_POWERDOWN);
}
static int tdo24m_resume(struct spi_device *spi)
{
struct tdo24m *lcd = dev_get_drvdata(&spi->dev);
return tdo24m_power(lcd, FB_BLANK_UNBLANK);
}
#else
#define tdo24m_suspend NULL
#define tdo24m_resume NULL
#endif
/* Power down all displays on reboot, poweroff or halt */
static void tdo24m_shutdown(struct spi_device *spi)
{
struct tdo24m *lcd = dev_get_drvdata(&spi->dev);
tdo24m_power(lcd, FB_BLANK_POWERDOWN);
}
static struct spi_driver tdo24m_driver = {
.driver = {
.name = "tdo24m",
.owner = THIS_MODULE,
},
.probe = tdo24m_probe,
.remove = __devexit_p(tdo24m_remove),
.shutdown = tdo24m_shutdown,
.suspend = tdo24m_suspend,
.resume = tdo24m_resume,
};
static int __init tdo24m_init(void)
{
return spi_register_driver(&tdo24m_driver);
}
module_init(tdo24m_init);
static void __exit tdo24m_exit(void)
{
spi_unregister_driver(&tdo24m_driver);
}
module_exit(tdo24m_exit);
MODULE_AUTHOR("Eric Miao <eric.miao@marvell.com>");
MODULE_DESCRIPTION("Driver for Toppoly TDO24M LCD Panel");
MODULE_LICENSE("GPL");
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment