Commit dbccdd1d authored by Sujith Manoharan's avatar Sujith Manoharan Committed by John W. Linville
Browse files

ath9k_hw: Use CONFIG_ATH9K_BTCOEX_SUPPORT



Make use of CONFIG_ATH9K_BTCOEX_SUPPORT in ath9k_hw
to provide a clean way of compilation without BTCOEX
support.
Signed-off-by: default avatarSujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent a3f846f1
......@@ -31,14 +31,14 @@ ath9k_hw-y:= \
eeprom_4k.o \
eeprom_9287.o \
ani.o \
btcoex.o \
mac.o \
ar9002_mac.o \
ar9003_mac.o \
ar9003_eeprom.o \
ar9003_paprd.o \
ar9003_mci.o
ar9003_paprd.o
ath9k_hw-$(CONFIG_ATH9K_BTCOEX_SUPPORT) += btcoex.o \
ar9003_mci.o
obj-$(CONFIG_ATH9K_HW) += ath9k_hw.o
obj-$(CONFIG_ATH9K_COMMON) += ath9k_common.o
......
......@@ -254,16 +254,32 @@ enum mci_gpm_coex_opcode {
#define MCI_GPM_IS_CAL_TYPE(_type) ((_type) <= MCI_GPM_WLAN_CAL_DONE)
/*
* Functions that are available to the MCI driver core.
*/
bool ar9003_mci_send_message(struct ath_hw *ah, u8 header, u32 flag,
u32 *payload, u8 len, bool wait_done,
bool check_bt);
void ar9003_mci_stop_bt(struct ath_hw *ah, bool sava_fullsleep);
u32 ar9003_mci_state(struct ath_hw *ah, u32 state_type, u32 *p_data);
void ar9003_mci_init_cal_req(struct ath_hw *ah, bool *is_reusable);
void ar9003_mci_init_cal_done(struct ath_hw *ah);
void ar9003_mci_setup(struct ath_hw *ah, u32 gpm_addr, void *gpm_buf,
u16 len, u32 sched_addr);
void ar9003_mci_cleanup(struct ath_hw *ah);
void ar9003_mci_get_interrupt(struct ath_hw *ah, u32 *raw_intr,
u32 *rx_msg_intr);
/*
* These functions are used by ath9k_hw.
*/
#ifdef CONFIG_ATH9K_BTCOEX_SUPPORT
static inline bool ar9003_mci_is_ready(struct ath_hw *ah)
{
return ah->btcoex_hw.mci.ready;
}
void ar9003_mci_stop_bt(struct ath_hw *ah, bool save_fullsleep);
void ar9003_mci_init_cal_req(struct ath_hw *ah, bool *is_reusable);
void ar9003_mci_init_cal_done(struct ath_hw *ah);
void ar9003_mci_set_full_sleep(struct ath_hw *ah);
void ar9003_mci_2g5g_switch(struct ath_hw *ah, bool wait_done);
void ar9003_mci_check_bt(struct ath_hw *ah);
......@@ -272,13 +288,48 @@ int ar9003_mci_end_reset(struct ath_hw *ah, struct ath9k_channel *chan,
struct ath9k_hw_cal_data *caldata);
void ar9003_mci_reset(struct ath_hw *ah, bool en_int, bool is_2g,
bool is_full_sleep);
void ar9003_mci_get_interrupt(struct ath_hw *ah, u32 *raw_intr,
u32 *rx_msg_intr);
void ar9003_mci_get_isr(struct ath_hw *ah, enum ath9k_int *masked);
#else
static inline bool ar9003_mci_is_ready(struct ath_hw *ah)
{
return ah->btcoex_hw.mci.ready;
return false;
}
static inline void ar9003_mci_stop_bt(struct ath_hw *ah, bool save_fullsleep)
{
}
static inline void ar9003_mci_init_cal_req(struct ath_hw *ah, bool *is_reusable)
{
}
static inline void ar9003_mci_init_cal_done(struct ath_hw *ah)
{
}
static inline void ar9003_mci_set_full_sleep(struct ath_hw *ah)
{
}
static inline void ar9003_mci_2g5g_switch(struct ath_hw *ah, bool wait_done)
{
}
static inline void ar9003_mci_check_bt(struct ath_hw *ah)
{
}
static inline bool ar9003_mci_start_reset(struct ath_hw *ah, struct ath9k_channel *chan)
{
return false;
}
static inline int ar9003_mci_end_reset(struct ath_hw *ah, struct ath9k_channel *chan,
struct ath9k_hw_cal_data *caldata)
{
return 0;
}
static inline void ar9003_mci_reset(struct ath_hw *ah, bool en_int, bool is_2g,
bool is_full_sleep)
{
}
static inline void ar9003_mci_get_isr(struct ath_hw *ah, enum ath9k_int *masked)
{
}
#endif /* CONFIG_ATH9K_BTCOEX_SUPPORT */
#endif
......@@ -105,7 +105,6 @@ void ath9k_hw_init_btcoex_hw(struct ath_hw *ah, int qnum);
void ath9k_hw_btcoex_set_weight(struct ath_hw *ah,
u32 bt_weight,
u32 wlan_weight);
void ath9k_hw_btcoex_enable(struct ath_hw *ah);
void ath9k_hw_btcoex_disable(struct ath_hw *ah);
void ath9k_hw_btcoex_bt_stomp(struct ath_hw *ah,
enum ath_stomp_type stomp_type);
......
......@@ -1800,8 +1800,7 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan,
#endif
}
if (ah->btcoex_hw.enabled &&
ath9k_hw_get_btcoex_scheme(ah) != ATH_BTCOEX_CFG_NONE)
if (ath9k_hw_btcoex_is_enabled(ah))
ath9k_hw_btcoex_enable(ah);
if (mci)
......
......@@ -802,8 +802,9 @@ struct ath_hw {
int firpwr[5];
enum ath9k_ani_cmd ani_function;
/* Bluetooth coexistance */
#ifdef CONFIG_ATH9K_BTCOEX_SUPPORT
struct ath_btcoex_hw btcoex_hw;
#endif
u32 intr_txqs;
u8 txchainmask;
......@@ -1052,13 +1053,29 @@ void ath9k_hw_proc_mib_event(struct ath_hw *ah);
void ath9k_hw_ani_monitor(struct ath_hw *ah, struct ath9k_channel *chan);
#ifdef CONFIG_ATH9K_BTCOEX_SUPPORT
static inline bool ath9k_hw_btcoex_is_enabled(struct ath_hw *ah)
{
return ah->btcoex_hw.enabled;
}
void ath9k_hw_btcoex_enable(struct ath_hw *ah);
static inline enum ath_btcoex_scheme
ath9k_hw_get_btcoex_scheme(struct ath_hw *ah)
{
return ah->btcoex_hw.scheme;
}
#else
#define ath9k_hw_get_btcoex_scheme(...) ATH_BTCOEX_CFG_NONE
static inline bool ath9k_hw_btcoex_is_enabled(struct ath_hw *ah)
{
return false;
}
static inline void ath9k_hw_btcoex_enable(struct ath_hw *ah)
{
}
static inline enum ath_btcoex_scheme
ath9k_hw_get_btcoex_scheme(struct ath_hw *ah)
{
return ATH_BTCOEX_CFG_NONE;
}
#endif
#define ATH9K_CLOCK_RATE_CCK 22
......
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment