All new accounts created on Gitlab now require administrator approval. If you invite any collaborators, please let Flux staff know so they can approve the accounts.

Commit d9621176 authored by Linus Walleij's avatar Linus Walleij

ARM: nomadik: bump the IRQ numbers again

Bump the IRQ numbers from offset at 1 (right above NO_IRQ)
to 32. This is the painful way to learn that if you're using
SPARSE_IRQ and avoid to define .nr_irqs in your machine,
the first 16 IRQs will be pre-allocated, and the IRQdomain
code (as the VIC core code before it) will then assume
that all IRQ descriptors are pre-allocated, and 16 of them
are - by somebody else. So mapping the IRQs will fail in
irq_create_mapping(). Moving the offset upward rids us of
this problem.

Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
parent 7f252b16
......@@ -22,49 +22,49 @@
#include <mach/hardware.h>
#define IRQ_VIC_START 1 /* first VIC interrupt is 1 */
#define IRQ_VIC_START 32 /* first VIC interrupt is 1 */
/*
* Interrupt numbers generic for all Nomadik Chip cuts
*/
#define IRQ_WATCHDOG 1
#define IRQ_SOFTINT 2
#define IRQ_CRYPTO 3
#define IRQ_OWM 4
#define IRQ_MTU0 5
#define IRQ_MTU1 6
#define IRQ_GPIO0 7
#define IRQ_GPIO1 8
#define IRQ_GPIO2 9
#define IRQ_GPIO3 10
#define IRQ_RTC_RTT 11
#define IRQ_SSP 12
#define IRQ_UART0 13
#define IRQ_DMA1 14
#define IRQ_CLCD_MDIF 15
#define IRQ_DMA0 16
#define IRQ_PWRFAIL 17
#define IRQ_UART1 18
#define IRQ_FIRDA 19
#define IRQ_MSP0 20
#define IRQ_I2C0 21
#define IRQ_I2C1 22
#define IRQ_SDMMC 23
#define IRQ_USBOTG 24
#define IRQ_SVA_IT0 25
#define IRQ_SVA_IT1 26
#define IRQ_SAA_IT0 27
#define IRQ_SAA_IT1 28
#define IRQ_UART2 29
#define IRQ_MSP2 30
#define IRQ_L2CC 49
#define IRQ_HPI 50
#define IRQ_SKE 51
#define IRQ_KP 52
#define IRQ_MEMST 55
#define IRQ_SGA_IT 59
#define IRQ_USBM 61
#define IRQ_MSP1 63
#define IRQ_WATCHDOG (IRQ_VIC_START+0)
#define IRQ_SOFTINT (IRQ_VIC_START+1)
#define IRQ_CRYPTO (IRQ_VIC_START+2)
#define IRQ_OWM (IRQ_VIC_START+3)
#define IRQ_MTU0 (IRQ_VIC_START+4)
#define IRQ_MTU1 (IRQ_VIC_START+5)
#define IRQ_GPIO0 (IRQ_VIC_START+6)
#define IRQ_GPIO1 (IRQ_VIC_START+7)
#define IRQ_GPIO2 (IRQ_VIC_START+8)
#define IRQ_GPIO3 (IRQ_VIC_START+9)
#define IRQ_RTC_RTT (IRQ_VIC_START+10)
#define IRQ_SSP (IRQ_VIC_START+11)
#define IRQ_UART0 (IRQ_VIC_START+12)
#define IRQ_DMA1 (IRQ_VIC_START+13)
#define IRQ_CLCD_MDIF (IRQ_VIC_START+14)
#define IRQ_DMA0 (IRQ_VIC_START+15)
#define IRQ_PWRFAIL (IRQ_VIC_START+16)
#define IRQ_UART1 (IRQ_VIC_START+17)
#define IRQ_FIRDA (IRQ_VIC_START+18)
#define IRQ_MSP0 (IRQ_VIC_START+19)
#define IRQ_I2C0 (IRQ_VIC_START+20)
#define IRQ_I2C1 (IRQ_VIC_START+21)
#define IRQ_SDMMC (IRQ_VIC_START+22)
#define IRQ_USBOTG (IRQ_VIC_START+23)
#define IRQ_SVA_IT0 (IRQ_VIC_START+24)
#define IRQ_SVA_IT1 (IRQ_VIC_START+25)
#define IRQ_SAA_IT0 (IRQ_VIC_START+26)
#define IRQ_SAA_IT1 (IRQ_VIC_START+27)
#define IRQ_UART2 (IRQ_VIC_START+28)
#define IRQ_MSP2 (IRQ_VIC_START+29)
#define IRQ_L2CC (IRQ_VIC_START+30)
#define IRQ_HPI (IRQ_VIC_START+31)
#define IRQ_SKE (IRQ_VIC_START+32)
#define IRQ_KP (IRQ_VIC_START+33)
#define IRQ_MEMST (IRQ_VIC_START+34)
#define IRQ_SGA_IT (IRQ_VIC_START+35)
#define IRQ_USBM (IRQ_VIC_START+36)
#define IRQ_MSP1 (IRQ_VIC_START+37)
#define NOMADIK_GPIO_OFFSET (IRQ_VIC_START+64)
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment