Commit d7065c30 authored by Christian Lamparter's avatar Christian Lamparter Committed by John W. Linville
Browse files

p54spi: Kconfig option for config blob

This patch adds an Kconfig option, which allows the user
to select, whenever he/she wants to include a 4k blob for
generic calibration and interface values into the driver,
or cut the module size by about 15 to 20%.

Signed-off-by: default avatarChristian Lamparter <>
Signed-off-by: default avatarJohn W. Linville <>
parent b4c52612
......@@ -49,6 +49,23 @@ config P54_SPI
If you choose to build a module, it'll be called p54spi.
bool "Include fallback EEPROM blob"
depends on P54_SPI
default n
Unlike the PCI or USB devices, the SPI variants don't have
a dedicated EEPROM chip to store all device specific values
for calibration, country and interface settings.
The driver will try to load the image "3826.eeprom", if the
file is put at the right place. (usually /lib/firmware.)
Only if this request fails, this option will provide a
backup set of generic values to get the device working.
Enabling this option adds about 4k to p54spi.
config P54_LEDS
depends on P54_COMMON && MAC80211_LEDS && (LEDS_CLASS = y || LEDS_CLASS = P54_COMMON)
......@@ -32,11 +32,14 @@
#include <linux/slab.h>
#include "p54spi.h"
#include "p54spi_eeprom.h"
#include "p54.h"
#include "lmac.h"
#include "p54spi_eeprom.h"
......@@ -195,9 +198,11 @@ static int p54spi_request_eeprom(struct ieee80211_hw *dev)
ret = request_firmware(&eeprom, "3826.eeprom", &priv->spi->dev);
if (ret < 0) {
dev_info(&priv->spi->dev, "loading default eeprom...\n");
ret = p54_parse_eeprom(dev, (void *) p54spi_eeprom,
} else {
dev_info(&priv->spi->dev, "loading user eeprom...\n");
ret = p54_parse_eeprom(dev, (void *) eeprom->data,
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment