Commit d66c2582 authored by Felix Fietkau's avatar Felix Fietkau Committed by Johannes Berg

mac80211: minstrel_ht: fix rounding issue in MCS duration calculation

On very high MCS bitrates, the calculated duration of rates that are
next to each other can be very imprecise, due to the small packet size
used as reference (1200 bytes).
This is most visible in VHT80 nss=2 MCS8/9, for which minstrel shows the
same throughput when the probability is also the same. This leads to a
bad rate selection for such rates.

Fix this issue by introducing an average A-MPDU size factor into the
calculation.
Signed-off-by: default avatarFelix Fietkau <nbd@openwrt.org>
Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
parent 2e54a689
......@@ -17,10 +17,11 @@
#include "rc80211_minstrel.h"
#include "rc80211_minstrel_ht.h"
#define AVG_AMPDU_SIZE 16
#define AVG_PKT_SIZE 1200
/* Number of bits for an average sized packet */
#define MCS_NBITS (AVG_PKT_SIZE << 3)
#define MCS_NBITS ((AVG_PKT_SIZE * AVG_AMPDU_SIZE) << 3)
/* Number of symbols for a packet with (bps) bits per symbol */
#define MCS_NSYMS(bps) DIV_ROUND_UP(MCS_NBITS, (bps))
......@@ -33,7 +34,8 @@
)
/* Transmit duration for the raw data part of an average sized packet */
#define MCS_DURATION(streams, sgi, bps) MCS_SYMBOL_TIME(sgi, MCS_NSYMS((streams) * (bps)))
#define MCS_DURATION(streams, sgi, bps) \
(MCS_SYMBOL_TIME(sgi, MCS_NSYMS((streams) * (bps))) / AVG_AMPDU_SIZE)
#define BW_20 0
#define BW_40 1
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment