diff --git a/drivers/i2c/busses/i2c-designware.c b/drivers/i2c/busses/i2c-designware.c
index fd1616b3d2b5d103c199a9a173961b8af79e2ee8..cdfd94e41ccc9b2b278b1fd410756be86e1c5c57 100644
--- a/drivers/i2c/busses/i2c-designware.c
+++ b/drivers/i2c/busses/i2c-designware.c
@@ -196,6 +196,61 @@ struct dw_i2c_dev {
 	unsigned int		rx_fifo_depth;
 };
 
+static u32
+i2c_dw_scl_hcnt(u32 ic_clk, u32 tSYMBOL, u32 tf, int cond, int offset)
+{
+	/*
+	 * DesignWare I2C core doesn't seem to have solid strategy to meet
+	 * the tHD;STA timing spec.  Configuring _HCNT based on tHIGH spec
+	 * will result in violation of the tHD;STA spec.
+	 */
+	if (cond)
+		/*
+		 * Conditional expression:
+		 *
+		 *   IC_[FS]S_SCL_HCNT + (1+4+3) >= IC_CLK * tHIGH
+		 *
+		 * This is based on the DW manuals, and represents an ideal
+		 * configuration.  The resulting I2C bus speed will be
+		 * faster than any of the others.
+		 *
+		 * If your hardware is free from tHD;STA issue, try this one.
+		 */
+		return (ic_clk * tSYMBOL + 5000) / 10000 - 8 + offset;
+	else
+		/*
+		 * Conditional expression:
+		 *
+		 *   IC_[FS]S_SCL_HCNT + 3 >= IC_CLK * (tHD;STA + tf)
+		 *
+		 * This is just experimental rule; the tHD;STA period turned
+		 * out to be proportinal to (_HCNT + 3).  With this setting,
+		 * we could meet both tHIGH and tHD;STA timing specs.
+		 *
+		 * If unsure, you'd better to take this alternative.
+		 *
+		 * The reason why we need to take into account "tf" here,
+		 * is the same as described in i2c_dw_scl_lcnt().
+		 */
+		return (ic_clk * (tSYMBOL + tf) + 5000) / 10000 - 3 + offset;
+}
+
+static u32 i2c_dw_scl_lcnt(u32 ic_clk, u32 tLOW, u32 tf, int offset)
+{
+	/*
+	 * Conditional expression:
+	 *
+	 *   IC_[FS]S_SCL_LCNT + 1 >= IC_CLK * (tLOW + tf)
+	 *
+	 * DW I2C core starts counting the SCL CNTs for the LOW period
+	 * of the SCL clock (tLOW) as soon as it pulls the SCL line.
+	 * In order to meet the tLOW timing spec, we need to take into
+	 * account the fall time of SCL signal (tf).  Default tf value
+	 * should be 0.3 us, for safety.
+	 */
+	return ((ic_clk * (tLOW + tf) + 5000) / 10000) - 1 + offset;
+}
+
 /**
  * i2c_dw_init() - initialize the designware i2c master hardware
  * @dev: device private data
@@ -207,20 +262,40 @@ struct dw_i2c_dev {
 static void i2c_dw_init(struct dw_i2c_dev *dev)
 {
 	u32 input_clock_khz = clk_get_rate(dev->clk) / 1000;
-	u32 ic_con;
+	u32 ic_con, hcnt, lcnt;
 
 	/* Disable the adapter */
 	writel(0, dev->base + DW_IC_ENABLE);
 
 	/* set standard and fast speed deviders for high/low periods */
-	writel((input_clock_khz * 40 / 10000)+1, /* std speed high, 4us */
-			dev->base + DW_IC_SS_SCL_HCNT);
-	writel((input_clock_khz * 47 / 10000)+1, /* std speed low, 4.7us */
-			dev->base + DW_IC_SS_SCL_LCNT);
-	writel((input_clock_khz *  6 / 10000)+1, /* fast speed high, 0.6us */
-			dev->base + DW_IC_FS_SCL_HCNT);
-	writel((input_clock_khz * 13 / 10000)+1, /* fast speed low, 1.3us */
-			dev->base + DW_IC_FS_SCL_LCNT);
+
+	/* Standard-mode */
+	hcnt = i2c_dw_scl_hcnt(input_clock_khz,
+				40,	/* tHD;STA = tHIGH = 4.0 us */
+				3,	/* tf = 0.3 us */
+				0,	/* 0: DW default, 1: Ideal */
+				0);	/* No offset */
+	lcnt = i2c_dw_scl_lcnt(input_clock_khz,
+				47,	/* tLOW = 4.7 us */
+				3,	/* tf = 0.3 us */
+				0);	/* No offset */
+	writel(hcnt, dev->base + DW_IC_SS_SCL_HCNT);
+	writel(lcnt, dev->base + DW_IC_SS_SCL_LCNT);
+	dev_dbg(dev->dev, "Standard-mode HCNT:LCNT = %d:%d\n", hcnt, lcnt);
+
+	/* Fast-mode */
+	hcnt = i2c_dw_scl_hcnt(input_clock_khz,
+				6,	/* tHD;STA = tHIGH = 0.6 us */
+				3,	/* tf = 0.3 us */
+				0,	/* 0: DW default, 1: Ideal */
+				0);	/* No offset */
+	lcnt = i2c_dw_scl_lcnt(input_clock_khz,
+				13,	/* tLOW = 1.3 us */
+				3,	/* tf = 0.3 us */
+				0);	/* No offset */
+	writel(hcnt, dev->base + DW_IC_FS_SCL_HCNT);
+	writel(lcnt, dev->base + DW_IC_FS_SCL_LCNT);
+	dev_dbg(dev->dev, "Fast-mode HCNT:LCNT = %d:%d\n", hcnt, lcnt);
 
 	/* configure the i2c master */
 	ic_con = DW_IC_CON_MASTER | DW_IC_CON_SLAVE_DISABLE |