Commit d4b834c1 authored by Barry Song's avatar Barry Song Committed by Mike Frysinger
Browse files

Blackfin: bf537-stamp: add resources for AD1938 audio card


Signed-off-by: default avatarBarry Song <barry.song@analog.com>
Signed-off-by: default avatarMike Frysinger <vapier@gentoo.org>
parent e68d1ebc
......@@ -524,6 +524,15 @@ static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
};
#endif
#if defined(CONFIG_SND_BF5XX_SOC_AD1938) \
|| defined(CONFIG_SND_BF5XX_SOC_AD1938_MODULE)
static struct bfin5xx_spi_chip ad1938_spi_chip_info = {
.enable_dma = 0,
.bits_per_word = 8,
.cs_gpio = GPIO_PF5,
};
#endif
#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
.enable_dma = 0,
......@@ -754,6 +763,18 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.controller_data = &ad1836_spi_chip_info,
},
#endif
#if defined(CONFIG_SND_BF5XX_SOC_AD1938) || defined(CONFIG_SND_BF5XX_SOC_AD1938_MODULE)
{
.modalias = "ad1938-spi",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
.chip_select = 0,/* CONFIG_SND_BLACKFIN_SPI_PFBIT */
.controller_data = &ad1938_spi_chip_info,
.mode = SPI_MODE_3,
},
#endif
#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
{
.modalias = "ad9960-spi",
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment