Commit d4913dc6 authored by Bob Moore's avatar Bob Moore Committed by Len Brown
Browse files

ACPICA: Formatting update - no functional changes



Split long lines, update comments.
Signed-off-by: default avatarBob Moore <robert.moore@intel.com>
Signed-off-by: default avatarLin Ming <ming.m.lin@intel.com>
Signed-off-by: default avatarLen Brown <len.brown@intel.com>
parent 768aaaf1
......@@ -88,10 +88,10 @@ acpi_ev_set_gpe_type(struct acpi_gpe_event_info *gpe_event_info, u8 type)
status = acpi_ev_disable_gpe(gpe_event_info);
/* Type was validated above */
/* Clear the type bits and insert the new Type */
gpe_event_info->flags &= ~ACPI_GPE_TYPE_MASK; /* Clear type bits */
gpe_event_info->flags |= type; /* Insert type */
gpe_event_info->flags &= ~ACPI_GPE_TYPE_MASK;
gpe_event_info->flags |= type;
return_ACPI_STATUS(status);
}
......@@ -122,6 +122,7 @@ acpi_ev_update_gpe_enable_masks(struct acpi_gpe_event_info *gpe_event_info,
if (!gpe_register_info) {
return_ACPI_STATUS(AE_NOT_EXIST);
}
register_bit = (u8)
(1 <<
(gpe_event_info->gpe_number - gpe_register_info->base_gpe_number));
......
......@@ -104,9 +104,9 @@ u8 acpi_ev_valid_gpe_event(struct acpi_gpe_event_info *gpe_event_info)
while (gpe_block) {
if ((&gpe_block->event_info[0] <= gpe_event_info) &&
(&gpe_block->
event_info[((acpi_size) gpe_block->
register_count) * 8] >
(&gpe_block->event_info[((acpi_size)
gpe_block->
register_count) * 8] >
gpe_event_info)) {
return (TRUE);
}
......@@ -210,10 +210,9 @@ acpi_ev_delete_gpe_handlers(struct acpi_gpe_xrupt_info *gpe_xrupt_info,
/* Now look at the individual GPEs in this byte register */
for (j = 0; j < ACPI_GPE_REGISTER_WIDTH; j++) {
gpe_event_info =
&gpe_block->
event_info[((acpi_size) i *
ACPI_GPE_REGISTER_WIDTH) + j];
gpe_event_info = &gpe_block->event_info[((acpi_size) i *
ACPI_GPE_REGISTER_WIDTH)
+ j];
if ((gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK) ==
ACPI_GPE_DISPATCH_HANDLER) {
......@@ -293,8 +292,8 @@ acpi_ev_save_method_info(acpi_handle obj_handle,
/* Unknown method type, just ignore it! */
ACPI_DEBUG_PRINT((ACPI_DB_LOAD,
"Ignoring unknown GPE method type: %s (name not of form _Lxx or _Exx)",
name));
"Ignoring unknown GPE method type: %s "
"(name not of form _Lxx or _Exx)", name));
return_ACPI_STATUS(AE_OK);
}
......@@ -306,17 +305,16 @@ acpi_ev_save_method_info(acpi_handle obj_handle,
/* Conversion failed; invalid method, just ignore it */
ACPI_DEBUG_PRINT((ACPI_DB_LOAD,
"Could not extract GPE number from name: %s (name is not of form _Lxx or _Exx)",
name));
"Could not extract GPE number from name: %s "
"(name is not of form _Lxx or _Exx)", name));
return_ACPI_STATUS(AE_OK);
}
/* Ensure that we have a valid GPE number for this GPE block */
if ((gpe_number < gpe_block->block_base_number) ||
(gpe_number >=
(gpe_block->block_base_number +
(gpe_block->register_count * 8)))) {
(gpe_number >= (gpe_block->block_base_number +
(gpe_block->register_count * 8)))) {
/*
* Not valid for this GPE block, just ignore it. However, it may be
* valid for a different GPE block, since GPE0 and GPE1 methods both
......@@ -423,9 +421,9 @@ acpi_ev_match_prw_and_gpe(acpi_handle obj_handle,
if ((obj_desc->package.count < 2) ||
((obj_desc->package.elements[0])->common.type !=
ACPI_TYPE_LOCAL_REFERENCE)
|| ((obj_desc->package.elements[1])->common.type !=
ACPI_TYPE_INTEGER)) {
ACPI_TYPE_LOCAL_REFERENCE) ||
((obj_desc->package.elements[1])->common.type !=
ACPI_TYPE_INTEGER)) {
goto cleanup;
}
......@@ -450,11 +448,11 @@ acpi_ev_match_prw_and_gpe(acpi_handle obj_handle,
*/
if ((gpe_device == target_gpe_device) &&
(gpe_number >= gpe_block->block_base_number) &&
(gpe_number <
gpe_block->block_base_number + (gpe_block->register_count * 8))) {
gpe_event_info =
&gpe_block->event_info[gpe_number -
gpe_block->block_base_number];
(gpe_number < gpe_block->block_base_number +
(gpe_block->register_count * 8))) {
gpe_event_info = &gpe_block->event_info[gpe_number -
gpe_block->
block_base_number];
/* Mark GPE for WAKE-ONLY but WAKE_DISABLED */
......@@ -1033,8 +1031,8 @@ acpi_ev_initialize_gpe_block(struct acpi_namespace_node *gpe_device,
* 1) are "runtime" or "run/wake" GPEs, and
* 2) have a corresponding _Lxx or _Exx method
*
* Any other GPEs within this block must be enabled via the acpi_enable_gpe()
* external interface.
* Any other GPEs within this block must be enabled via the
* acpi_enable_gpe() external interface.
*/
wake_gpe_count = 0;
gpe_enabled_count = 0;
......@@ -1044,14 +1042,13 @@ acpi_ev_initialize_gpe_block(struct acpi_namespace_node *gpe_device,
/* Get the info block for this particular GPE */
gpe_event_info =
&gpe_block->
event_info[((acpi_size) i *
ACPI_GPE_REGISTER_WIDTH) + j];
gpe_event_info = &gpe_block->event_info[((acpi_size) i *
ACPI_GPE_REGISTER_WIDTH)
+ j];
if (((gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK) ==
ACPI_GPE_DISPATCH_METHOD)
&& (gpe_event_info->flags & ACPI_GPE_TYPE_RUNTIME)) {
ACPI_GPE_DISPATCH_METHOD) &&
(gpe_event_info->flags & ACPI_GPE_TYPE_RUNTIME)) {
gpe_enabled_count++;
}
......@@ -1105,8 +1102,8 @@ acpi_status acpi_ev_gpe_initialize(void)
/*
* Initialize the GPE Block(s) defined in the FADT
*
* Why the GPE register block lengths are divided by 2: From the ACPI Spec,
* section "General-Purpose Event Registers", we have:
* Why the GPE register block lengths are divided by 2: From the ACPI
* Spec, section "General-Purpose Event Registers", we have:
*
* "Each register block contains two registers of equal length
* GPEx_STS and GPEx_EN (where x is 0 or 1). The length of the
......@@ -1163,7 +1160,8 @@ acpi_status acpi_ev_gpe_initialize(void)
if ((register_count0) &&
(gpe_number_max >= acpi_gbl_FADT.gpe1_base)) {
ACPI_ERROR((AE_INFO,
"GPE0 block (GPE 0 to %d) overlaps the GPE1 block (GPE %d to %d) - Ignoring GPE1",
"GPE0 block (GPE 0 to %d) overlaps the GPE1 block "
"(GPE %d to %d) - Ignoring GPE1",
gpe_number_max, acpi_gbl_FADT.gpe1_base,
acpi_gbl_FADT.gpe1_base +
((register_count1 *
......
......@@ -163,10 +163,10 @@ acpi_ev_queue_notify_request(struct acpi_namespace_node * node,
* 2) Global device notify handler
* 3) Per-device notify handler
*/
if ((acpi_gbl_system_notify.handler
&& (notify_value <= ACPI_MAX_SYS_NOTIFY))
|| (acpi_gbl_device_notify.handler
&& (notify_value > ACPI_MAX_SYS_NOTIFY)) || handler_obj) {
if ((acpi_gbl_system_notify.handler &&
(notify_value <= ACPI_MAX_SYS_NOTIFY)) ||
(acpi_gbl_device_notify.handler &&
(notify_value > ACPI_MAX_SYS_NOTIFY)) || handler_obj) {
notify_info = acpi_ut_create_generic_state();
if (!notify_info) {
return (AE_NO_MEMORY);
......@@ -174,7 +174,8 @@ acpi_ev_queue_notify_request(struct acpi_namespace_node * node,
if (!handler_obj) {
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"Executing system notify handler for Notify (%4.4s, %X) node %p\n",
"Executing system notify handler for Notify (%4.4s, %X) "
"node %p\n",
acpi_ut_get_node_name(node),
notify_value, node));
}
......
......@@ -703,7 +703,8 @@ acpi_ev_install_handler(acpi_handle obj_handle,
if (next_handler_obj->address_space.space_id ==
handler_obj->address_space.space_id) {
ACPI_DEBUG_PRINT((ACPI_DB_OPREGION,
"Found handler for region [%s] in device %p(%p) handler %p\n",
"Found handler for region [%s] in device %p(%p) "
"handler %p\n",
acpi_ut_get_region_name
(handler_obj->address_space.
space_id), obj_desc,
......
......@@ -241,7 +241,8 @@ acpi_ev_pci_config_region_setup(acpi_handle handle,
status = AE_OK;
} else {
ACPI_EXCEPTION((AE_INFO, status,
"Could not install PciConfig handler for Root Bridge %4.4s",
"Could not install PciConfig handler "
"for Root Bridge %4.4s",
acpi_ut_get_node_name
(pci_root_node)));
}
......@@ -293,9 +294,8 @@ acpi_ev_pci_config_region_setup(acpi_handle handle,
* Get the PCI device and function numbers from the _ADR object contained
* in the parent's scope.
*/
status =
acpi_ut_evaluate_numeric_object(METHOD_NAME__ADR, pci_device_node,
&pci_value);
status = acpi_ut_evaluate_numeric_object(METHOD_NAME__ADR,
pci_device_node, &pci_value);
/*
* The default is zero, and since the allocation above zeroed the data,
......@@ -308,18 +308,16 @@ acpi_ev_pci_config_region_setup(acpi_handle handle,
/* The PCI segment number comes from the _SEG method */
status =
acpi_ut_evaluate_numeric_object(METHOD_NAME__SEG, pci_root_node,
&pci_value);
status = acpi_ut_evaluate_numeric_object(METHOD_NAME__SEG,
pci_root_node, &pci_value);
if (ACPI_SUCCESS(status)) {
pci_id->segment = ACPI_LOWORD(pci_value);
}
/* The PCI bus number comes from the _BBN method */
status =
acpi_ut_evaluate_numeric_object(METHOD_NAME__BBN, pci_root_node,
&pci_value);
status = acpi_ut_evaluate_numeric_object(METHOD_NAME__BBN,
pci_root_node, &pci_value);
if (ACPI_SUCCESS(status)) {
pci_id->bus = ACPI_LOWORD(pci_value);
}
......@@ -632,8 +630,8 @@ acpi_ev_initialize_region(union acpi_operand_object *region_obj,
acpi_ns_locked);
/*
* Tell all users that this region is usable by running the _REG
* method
* Tell all users that this region is usable by
* running the _REG method
*/
if (acpi_ns_locked) {
status =
......
......@@ -631,7 +631,8 @@ acpi_install_gpe_handler(acpi_handle gpe_device,
/* Setup up dispatch flags to indicate handler (vs. method) */
gpe_event_info->flags &= ~(ACPI_GPE_XRUPT_TYPE_MASK | ACPI_GPE_DISPATCH_MASK); /* Clear bits */
gpe_event_info->flags &=
~(ACPI_GPE_XRUPT_TYPE_MASK | ACPI_GPE_DISPATCH_MASK);
gpe_event_info->flags |= (u8) (type | ACPI_GPE_DISPATCH_HANDLER);
acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
......
......@@ -193,7 +193,8 @@ acpi_remove_address_space_handler(acpi_handle device,
/* Matched space_id, first dereference this in the Regions */
ACPI_DEBUG_PRINT((ACPI_DB_OPREGION,
"Removing address handler %p(%p) for region %s on Device %p(%p)\n",
"Removing address handler %p(%p) for region %s "
"on Device %p(%p)\n",
handler_obj, handler,
acpi_ut_get_region_name(space_id),
node, obj_desc));
......
......@@ -86,7 +86,8 @@ acpi_status acpi_hw_set_mode(u32 mode)
*/
if (!acpi_gbl_FADT.acpi_enable && !acpi_gbl_FADT.acpi_disable) {
ACPI_ERROR((AE_INFO,
"No ACPI mode transition supported in this system (enable/disable both zero)"));
"No ACPI mode transition supported in this system "
"(enable/disable both zero)"));
return_ACPI_STATUS(AE_OK);
}
......
......@@ -89,10 +89,9 @@ acpi_status acpi_hw_low_disable_gpe(struct acpi_gpe_event_info *gpe_event_info)
/* Clear just the bit that corresponds to this GPE */
ACPI_CLEAR_BIT(enable_mask,
((u32) 1 <<
(gpe_event_info->gpe_number -
gpe_register_info->base_gpe_number)));
ACPI_CLEAR_BIT(enable_mask, ((u32)1 <<
(gpe_event_info->gpe_number -
gpe_register_info->base_gpe_number)));
/* Write the updated enable mask */
......@@ -156,10 +155,9 @@ acpi_status acpi_hw_clear_gpe(struct acpi_gpe_event_info * gpe_event_info)
ACPI_FUNCTION_ENTRY();
register_bit = (u8)
(1 <<
(gpe_event_info->gpe_number -
gpe_event_info->register_info->base_gpe_number));
register_bit = (u8)(1 <<
(gpe_event_info->gpe_number -
gpe_event_info->register_info->base_gpe_number));
/*
* Write a one to the appropriate bit in the status register to
......@@ -206,10 +204,9 @@ acpi_hw_get_gpe_status(struct acpi_gpe_event_info * gpe_event_info,
/* Get the register bitmask for this GPE */
register_bit = (u8)
(1 <<
(gpe_event_info->gpe_number -
gpe_event_info->register_info->base_gpe_number));
register_bit = (u8)(1 <<
(gpe_event_info->gpe_number -
gpe_event_info->register_info->base_gpe_number));
/* GPE currently enabled? (enabled for runtime?) */
......
......@@ -349,8 +349,8 @@ acpi_status asmlinkage acpi_enter_sleep_state(u8 sleep_state)
* Wait ten seconds, then try again. This is to get S4/S5 to work on
* all machines.
*
* We wait so long to allow chipsets that poll this reg very slowly to
* still read the right value. Ideally, this block would go
* We wait so long to allow chipsets that poll this reg very slowly
* to still read the right value. Ideally, this block would go
* away entirely.
*/
acpi_os_stall(10000000);
......@@ -501,12 +501,10 @@ acpi_status acpi_leave_sleep_state_prep(u8 sleep_state)
/* Insert the SLP_TYP bits */
pm1a_control |=
(acpi_gbl_sleep_type_a << sleep_type_reg_info->
bit_position);
pm1b_control |=
(acpi_gbl_sleep_type_b << sleep_type_reg_info->
bit_position);
pm1a_control |= (acpi_gbl_sleep_type_a <<
sleep_type_reg_info->bit_position);
pm1b_control |= (acpi_gbl_sleep_type_b <<
sleep_type_reg_info->bit_position);
/* Write the control registers and ignore any errors */
......
......@@ -494,7 +494,8 @@ acpi_get_sleep_type_data(u8 sleep_state, u8 *sleep_type_a, u8 *sleep_type_b)
((info->return_object->package.elements[1])->common.type
!= ACPI_TYPE_INTEGER)) {
ACPI_ERROR((AE_INFO,
"Sleep State return package elements are not both Integers (%s, %s)",
"Sleep State return package elements are not both Integers "
"(%s, %s)",
acpi_ut_get_object_type_name(info->return_object->
package.elements[0]),
acpi_ut_get_object_type_name(info->return_object->
......
......@@ -118,9 +118,8 @@ acpi_status acpi_ns_root_initialize(void)
}
/*
* Name entered successfully.
* If entry in pre_defined_names[] specifies an
* initial value, create the initial value.
* Name entered successfully. If entry in pre_defined_names[] specifies
* an initial value, create the initial value.
*/
if (init_val->val) {
status = acpi_os_predefined_override(init_val, &val);
......@@ -178,9 +177,8 @@ acpi_status acpi_ns_root_initialize(void)
case ACPI_TYPE_STRING:
/*
* Build an object around the static string
*/
/* Build an object around the static string */
obj_desc->string.length =
(u32) ACPI_STRLEN(val);
obj_desc->string.pointer = val;
......@@ -314,10 +312,8 @@ acpi_ns_lookup(union acpi_generic_state *scope_info,
return_ACPI_STATUS(AE_NO_NAMESPACE);
}
/*
* Get the prefix scope.
* A null scope means use the root scope
*/
/* Get the prefix scope. A null scope means use the root scope */
if ((!scope_info) || (!scope_info->scope.node)) {
ACPI_DEBUG_PRINT((ACPI_DB_NAMES,
"Null scope prefix, using root node (%p)\n",
......@@ -337,8 +333,8 @@ acpi_ns_lookup(union acpi_generic_state *scope_info,
if (!(flags & ACPI_NS_PREFIX_IS_SCOPE)) {
/*
* This node might not be a actual "scope" node (such as a
* Device/Method, etc.) It could be a Package or other object node.
* Backup up the tree to find the containing scope node.
* Device/Method, etc.) It could be a Package or other object
* node. Backup up the tree to find the containing scope node.
*/
while (!acpi_ns_opens_scope(prefix_node->type) &&
prefix_node->type != ACPI_TYPE_ANY) {
......@@ -348,7 +344,7 @@ acpi_ns_lookup(union acpi_generic_state *scope_info,
}
}
/* Save type TBD: may be no longer necessary */
/* Save type. TBD: may be no longer necessary */
type_to_check_for = type;
......@@ -413,6 +409,7 @@ acpi_ns_lookup(union acpi_generic_state *scope_info,
/* Name is fully qualified, no search rules apply */
search_parent_flag = ACPI_NS_NO_UPSEARCH;
/*
* Point past this prefix to the name segment
* part or the next Parent Prefix
......@@ -428,7 +425,8 @@ acpi_ns_lookup(union acpi_generic_state *scope_info,
/* Current scope has no parent scope */
ACPI_ERROR((AE_INFO,
"ACPI path has too many parent prefixes (^) - reached beyond root node"));
"ACPI path has too many parent prefixes (^) "
"- reached beyond root node"));
return_ACPI_STATUS(AE_NOT_FOUND);
}
}
......@@ -530,9 +528,9 @@ acpi_ns_lookup(union acpi_generic_state *scope_info,
while (num_segments && current_node) {
num_segments--;
if (!num_segments) {
/*
* This is the last segment, enable typechecking
*/
/* This is the last segment, enable typechecking */
this_search_type = type;
/*
......@@ -583,9 +581,9 @@ acpi_ns_lookup(union acpi_generic_state *scope_info,
if (num_segments > 0) {
/*
* If we have an alias to an object that opens a scope (such as a
* device or processor), we need to dereference the alias here so that
* we can access any children of the original node (via the remaining
* segments).
* device or processor), we need to dereference the alias here so
* that we can access any children of the original node (via the
* remaining segments).
*/
if (this_node->type == ACPI_TYPE_LOCAL_ALIAS) {
if (!this_node->object) {
......@@ -593,8 +591,8 @@ acpi_ns_lookup(union acpi_generic_state *scope_info,
}
if (acpi_ns_opens_scope
(((struct acpi_namespace_node *)this_node->
object)->type)) {
(((struct acpi_namespace_node *)
this_node->object)->type)) {
this_node =
(struct acpi_namespace_node *)
this_node->object;
......@@ -638,8 +636,8 @@ acpi_ns_lookup(union acpi_generic_state *scope_info,
/*
* If this is the last name segment and we are not looking for a
* specific type, but the type of found object is known, use that type
* to (later) see if it opens a scope.
* specific type, but the type of found object is known, use that
* type to (later) see if it opens a scope.
*/
if (type == ACPI_TYPE_ANY) {
type = this_node->type;
......@@ -652,9 +650,8 @@ acpi_ns_lookup(union acpi_generic_state *scope_info,
current_node = this_node;
}
/*
* Always check if we need to open a new scope
*/
/* Always check if we need to open a new scope */
if (!(flags & ACPI_NS_DONT_OPEN_SCOPE) && (walk_state)) {
/*
* If entry is a type which opens a scope, push the new scope on the
......
......@@ -76,8 +76,7 @@ struct acpi_namespace_node *acpi_ns_create_node(u32 name)
ACPI_MEM_TRACKING(acpi_gbl_ns_node_list->total_allocated++);
#ifdef ACPI_DBG_TRACK_ALLOCATIONS
temp =
acpi_gbl_ns_node_list->total_allocated -
temp = acpi_gbl_ns_node_list->total_allocated -
acpi_gbl_ns_node_list->total_freed;
if (temp > acpi_gbl_ns_node_list->max_occupied) {
acpi_gbl_ns_node_list->max_occupied = temp;
......@@ -145,9 +144,8 @@ void acpi_ns_delete_node(struct acpi_namespace_node *node)
ACPI_MEM_TRACKING(acpi_gbl_ns_node_list->total_freed++);
/*
* Detach an object if there is one, then delete the node
*/
/* Detach an object if there is one, then delete the node */
acpi_ns_detach_object(node);
(void)acpi_os_release_object(acpi_gbl_namespace_cache, node);
return_VOID;
......@@ -183,9 +181,8 @@ void acpi_ns_install_node(struct acpi_walk_state *walk_state, struct acpi_namesp
ACPI_FUNCTION_TRACE(ns_install_node);
/*
* Get the owner ID from the Walk state
* The owner ID is used to track table deletion and
* deletion of objects created by methods
* Get the owner ID from the Walk state. The owner ID is used to track
* table deletion and deletion of objects created by methods.
*/
if (walk_state) {
owner_id = walk_state->owner_id;
......@@ -260,9 +257,8 @@ void acpi_ns_delete_children(struct acpi_namespace_node *parent_node)
return_VOID;
}
/*
* Deallocate all children at this level
*/
/* Deallocate all children at this level */
do {
/* Get the things we need */
......@@ -285,9 +281,8 @@ void acpi_ns_delete_children(struct acpi_namespace_node *parent_node)
"Object %p, Remaining %X\n", child_node,
acpi_gbl_current_node_count));
/*
* Detach an object if there is one, then free the child node
*/
/* Detach an object if there is one, then free the child node */
acpi_ns_detach_object(child_node);
/* Now we can delete the node */
......@@ -304,7 +299,6 @@ void acpi_ns_delete_children(struct acpi_namespace_node *parent_node)
/* Clear the parent's child pointer */
parent_node->child = NULL;
return_VOID;
}
......
......@@ -220,9 +220,8 @@ acpi_ns_dump_one_object(acpi_handle obj_handle,
acpi_os_printf("%4.4s", acpi_ut_get_node_name(this_node));
}
/*
* Now we can print out the pertinent information
*/
/* Now we can print out the pertinent information */
acpi_os_printf(" %-12s %p %2.2X ",
acpi_ut_get_type_name(type), this_node,
this_node->owner_id);
......@@ -545,9 +544,8 @@ acpi_ns_dump_one_object(acpi_handle obj_handle,
goto cleanup;
}
/*
* Valid object, get the pointer to next level, if any
*/
/* Valid object, get the pointer to next level, if any */
switch (obj_type) {
case ACPI_TYPE_BUFFER:
case ACPI_TYPE_STRING:
......@@ -608,14 +606,14 @@ acpi_ns_dump_one_object(acpi_handle obj_handle,
* display_type - 0 or ACPI_DISPLAY_SUMMARY
* max_depth - Maximum depth of dump. Use ACPI_UINT32_MAX
* for an effectively unlimited depth.
* owner_id - Dump only objects owned by this ID. Use
* owner_id - Dump only objects owned by this ID. Use
* ACPI_UINT32_MAX to match all owners.
* start_handle - Where in namespace to start/end search
*
* RETURN: None
*
* DESCRIPTION: Dump typed objects within the loaded namespace.
* Uses acpi_ns_walk_namespace in conjunction with acpi_ns_dump_one_object.
* DESCRIPTION: Dump typed objects within the loaded namespace. Uses
* acpi_ns_walk_namespace in conjunction with acpi_ns_dump_one_object.
*
******************************************************************************/
......
......@@ -103,7 +103,8 @@ acpi_status acpi_ns_initialize_objects(void)
}
ACPI_DEBUG_PRINT_RAW((ACPI_DB_INIT,
"\nInitialized %hd/%hd Regions %hd/%hd Fields %hd/%hd Buffers %hd/%hd Packages (%hd nodes)\n",
"\nInitialized %hd/%hd Regions %hd/%hd Fields %hd/%hd "
"Buffers %hd/%hd Packages (%hd nodes)\n",
info.op_region_init, info.op_region_count,
info.field_init, info.field_count,
info.buffer_init, info.buffer_count,
......@@ -148,7 +149,8 @@ acpi_status acpi_ns_initialize_devices(void)
info.num_INI = 0;
ACPI_DEBUG_PRINT_RAW((ACPI_DB_INIT,
"Initializing Device/Processor/Thermal objects by executing _INI methods:"));
"Initializing Device/Processor/Thermal objects "
"by executing _INI methods:"));
/* Tree analysis: find all subtrees that contain _INI methods */
......@@ -180,7 +182,8 @@ acpi_status acpi_ns_initialize_devices(void)
}
ACPI_DEBUG_PRINT_RAW((ACPI_DB_INIT,
"\nExecuted %hd _INI methods requiring %hd _STA executions (examined %hd objects)\n",
"\nExecuted %hd _INI methods requiring %hd _STA executions "