Commit cfd0d11e authored by Takashi Iwai's avatar Takashi Iwai
Browse files

Merge tag 'asoc-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

The only particularly remarkable change here is the one for handling of
the Android suspend ignore code for idle_bias_off CODECs.  That one is
actually a regression fix as some of the new power savings that have
been introduced confused the suspend ignore code, making devices that
are active for non-audio reasons look like they are idle causing them to
be suspended instead of being kept active.
parents eedec3d3 43b6cec2
......@@ -1113,7 +1113,7 @@ static int cs42l73_pcm_hw_params(struct snd_pcm_substream *substream,
priv->config[id].mmcc &= 0xC0;
priv->config[id].mmcc |= cs42l73_mclk_coeffs[mclk_coeff].mmcc;
priv->config[id].spc &= 0xFC;
priv->config[id].spc &= MCK_SCLK_64FS;
priv->config[id].spc |= MCK_SCLK_MCLK;
} else {
/* CS42L73 Slave */
priv->config[id].spc &= 0xFC;
......
......@@ -3159,13 +3159,13 @@ static int wm8962_hw_params(struct snd_pcm_substream *substream,
case SNDRV_PCM_FORMAT_S16_LE:
break;
case SNDRV_PCM_FORMAT_S20_3LE:
aif0 |= 0x40;
aif0 |= 0x4;
break;
case SNDRV_PCM_FORMAT_S24_LE:
aif0 |= 0x80;
aif0 |= 0x8;
break;
case SNDRV_PCM_FORMAT_S32_LE:
aif0 |= 0xc0;
aif0 |= 0xc;
break;
default:
return -EINVAL;
......
......@@ -2753,11 +2753,6 @@ static int wm8994_resume(struct snd_soc_codec *codec)
codec->cache_only = 0;
}
/* Restore the registers */
ret = snd_soc_cache_sync(codec);
if (ret != 0)
dev_err(codec->dev, "Failed to sync cache: %d\n", ret);
wm8994_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
for (i = 0; i < ARRAY_SIZE(wm8994->fll); i++) {
......
......@@ -586,8 +586,8 @@ SOC_DAPM_SINGLE("Left Output Switch", WM8993_LINE_MIXER1, 0, 1, 0),
};
static const struct snd_kcontrol_new line2_mix[] = {
SOC_DAPM_SINGLE("IN2R Switch", WM8993_LINE_MIXER2, 2, 1, 0),
SOC_DAPM_SINGLE("IN2L Switch", WM8993_LINE_MIXER2, 1, 1, 0),
SOC_DAPM_SINGLE("IN1L Switch", WM8993_LINE_MIXER2, 2, 1, 0),
SOC_DAPM_SINGLE("IN1R Switch", WM8993_LINE_MIXER2, 1, 1, 0),
SOC_DAPM_SINGLE("Output Switch", WM8993_LINE_MIXER2, 0, 1, 0),
};
......@@ -848,8 +848,8 @@ static const struct snd_soc_dapm_route lineout1_se_routes[] = {
};
static const struct snd_soc_dapm_route lineout2_diff_routes[] = {
{ "LINEOUT2 Mixer", "IN2L Switch", "IN2L PGA" },
{ "LINEOUT2 Mixer", "IN2R Switch", "IN2R PGA" },
{ "LINEOUT2 Mixer", "IN1L Switch", "IN1L PGA" },
{ "LINEOUT2 Mixer", "IN1R Switch", "IN1R PGA" },
{ "LINEOUT2 Mixer", "Output Switch", "Right Output PGA" },
{ "LINEOUT2N Driver", NULL, "LINEOUT2 Mixer" },
......
......@@ -567,6 +567,17 @@ int snd_soc_suspend(struct device *dev)
if (!codec->suspended && codec->driver->suspend) {
switch (codec->dapm.bias_level) {
case SND_SOC_BIAS_STANDBY:
/*
* If the CODEC is capable of idle
* bias off then being in STANDBY
* means it's doing something,
* otherwise fall through.
*/
if (codec->dapm.idle_bias_off) {
dev_dbg(codec->dev,
"idle_bias_off CODEC on over suspend\n");
break;
}
case SND_SOC_BIAS_OFF:
codec->driver->suspend(codec);
codec->suspended = 1;
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment