Commit cf3a6aba authored by Uwe Kleine-König's avatar Uwe Kleine-König
Browse files

ARM: imx: remove last explicit users of virtual base address defines



This allows changing the mapping without the need to adapt all users.

While at it remove some unneeded casts to void __iomem *, this is already
taken care for in the IO_ADDRESS macros
Signed-off-by: default avatarUwe Kleine-König <u.kleine-koenig@pengutronix.de>
parent 08ff97b5
......@@ -159,22 +159,22 @@ struct platform_device imx_usb_device = {
static struct mxc_gpio_port imx_gpio_ports[] = {
{
.chip.label = "gpio-0",
.base = (void __iomem *)MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR),
.base = MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR),
.irq = MX1_GPIO_INT_PORTA,
.virtual_irq_start = MXC_GPIO_IRQ_START,
}, {
.chip.label = "gpio-1",
.base = (void __iomem *)MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR + 0x100),
.base = MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR + 0x100),
.irq = MX1_GPIO_INT_PORTB,
.virtual_irq_start = MXC_GPIO_IRQ_START + 32,
}, {
.chip.label = "gpio-2",
.base = (void __iomem *)MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR + 0x200),
.base = MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR + 0x200),
.irq = MX1_GPIO_INT_PORTC,
.virtual_irq_start = MXC_GPIO_IRQ_START + 64,
}, {
.chip.label = "gpio-3",
.base = (void __iomem *)MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR + 0x300),
.base = MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR + 0x300),
.irq = MX1_GPIO_INT_PORTD,
.virtual_irq_start = MXC_GPIO_IRQ_START + 96,
}
......
......@@ -182,22 +182,22 @@ struct platform_device mxc_pwm_device3 = {
static struct mxc_gpio_port imx_gpio_ports[] = {
{
.chip.label = "gpio-0",
.base = (void __iomem *)MX25_GPIO1_BASE_ADDR_VIRT,
.base = MX25_IO_ADDRESS(MX25_GPIO1_BASE_ADDR),
.irq = 52,
.virtual_irq_start = MXC_GPIO_IRQ_START,
}, {
.chip.label = "gpio-1",
.base = (void __iomem *)MX25_GPIO2_BASE_ADDR_VIRT,
.base = MX25_IO_ADDRESS(MX25_GPIO2_BASE_ADDR),
.irq = 51,
.virtual_irq_start = MXC_GPIO_IRQ_START + 32,
}, {
.chip.label = "gpio-2",
.base = (void __iomem *)MX25_GPIO3_BASE_ADDR_VIRT,
.base = MX25_IO_ADDRESS(MX25_GPIO3_BASE_ADDR),
.irq = 16,
.virtual_irq_start = MXC_GPIO_IRQ_START + 64,
}, {
.chip.label = "gpio-3",
.base = (void __iomem *)MX25_GPIO4_BASE_ADDR_VIRT,
.base = MX25_IO_ADDRESS(MX25_GPIO4_BASE_ADDR),
.irq = 23,
.virtual_irq_start = MXC_GPIO_IRQ_START + 96,
}
......
......@@ -56,7 +56,7 @@ int imx25_register_gpios(void);
void __init mx25_init_irq(void)
{
mxc_init_irq((void __iomem *)MX25_AVIC_BASE_ADDR_VIRT);
mxc_init_irq(MX25_IO_ADDRESS(MX25_AVIC_BASE_ADDR));
imx25_register_gpios();
}
......@@ -21,13 +21,12 @@
#define MX25_CRM_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0x80000)
#define MX25_GPT1_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0x90000)
#define MX25_GPIO4_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0x9c000)
#define MX25_GPIO3_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0xa4000)
#define MX25_GPIO1_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0xcc000)
#define MX25_GPIO2_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0xd0000)
#define MX25_WDOG_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0xdc000)
#define MX25_GPIO1_BASE_ADDR_VIRT (MX25_AIPS2_BASE_ADDR_VIRT + 0xcc000)
#define MX25_GPIO2_BASE_ADDR_VIRT (MX25_AIPS2_BASE_ADDR_VIRT + 0xd0000)
#define MX25_GPIO3_BASE_ADDR_VIRT (MX25_AIPS2_BASE_ADDR_VIRT + 0xa4000)
#define MX25_GPIO4_BASE_ADDR_VIRT (MX25_AIPS2_BASE_ADDR_VIRT + 0x9c000)
#define MX25_IO_P2V(x) ( \
IMX_IO_P2V_MODULE(x, MX25_AIPS1) ?: \
IMX_IO_P2V_MODULE(x, MX25_AIPS2) ?: \
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment