From cac1f3c8a80f3fc0b4489d1d3ba29214677ffab2 Mon Sep 17 00:00:00 2001
From: Paul Gortmaker <paul.gortmaker@windriver.com>
Date: Tue, 15 Apr 2008 12:49:21 -0400
Subject: [PATCH] phylib: factor out get_phy_id from within get_phy_device
We were already doing what amounts to a get_phy_id from within
get_phy_device, and rather than duplicate this for the TBIPA
probing, we might as well just factor it out and make it available
instead.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
drivers/net/phy/phy_device.c | 38 +++++++++++++++++++++++++++---------
include/linux/phy.h | 1 +
2 files changed, 30 insertions(+), 9 deletions(-)
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index f4c4fd85425f..8b1121b02f98 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -86,35 +86,55 @@ struct phy_device* phy_device_create(struct mii_bus *bus, int addr, int phy_id)
EXPORT_SYMBOL(phy_device_create);
/**
- * get_phy_device - reads the specified PHY device and returns its @phy_device struct
+ * get_phy_id - reads the specified addr for its ID.
* @bus: the target MII bus
* @addr: PHY address on the MII bus
+ * @phy_id: where to store the ID retrieved.
*
* Description: Reads the ID registers of the PHY at @addr on the
- * @bus, then allocates and returns the phy_device to represent it.
+ * @bus, stores it in @phy_id and returns zero on success.
*/
-struct phy_device * get_phy_device(struct mii_bus *bus, int addr)
+int get_phy_id(struct mii_bus *bus, int addr, u32 *phy_id)
{
int phy_reg;
- u32 phy_id;
- struct phy_device *dev = NULL;
/* Grab the bits from PHYIR1, and put them
* in the upper half */
phy_reg = bus->read(bus, addr, MII_PHYSID1);
if (phy_reg < 0)
- return ERR_PTR(phy_reg);
+ return -EIO;
- phy_id = (phy_reg & 0xffff) << 16;
+ *phy_id = (phy_reg & 0xffff) << 16;
/* Grab the bits from PHYIR2, and put them in the lower half */
phy_reg = bus->read(bus, addr, MII_PHYSID2);
if (phy_reg < 0)
- return ERR_PTR(phy_reg);
+ return -EIO;
+
+ *phy_id |= (phy_reg & 0xffff);
+
+ return 0;
+}
+
+/**
+ * get_phy_device - reads the specified PHY device and returns its @phy_device struct
+ * @bus: the target MII bus
+ * @addr: PHY address on the MII bus
+ *
+ * Description: Reads the ID registers of the PHY at @addr on the
+ * @bus, then allocates and returns the phy_device to represent it.
+ */
+struct phy_device * get_phy_device(struct mii_bus *bus, int addr)
+{
+ struct phy_device *dev = NULL;
+ u32 phy_id;
+ int r;
- phy_id |= (phy_reg & 0xffff);
+ r = get_phy_id(bus, addr, &phy_id);
+ if (r)
+ return ERR_PTR(r);
/* If the phy_id is all Fs, there is no device there */
if (0xffffffff == phy_id)
diff --git a/include/linux/phy.h b/include/linux/phy.h
index 2d838448415c..779cbcd65f62 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -381,6 +381,7 @@ struct phy_driver {
int phy_read(struct phy_device *phydev, u16 regnum);
int phy_write(struct phy_device *phydev, u16 regnum, u16 val);
+int get_phy_id(struct mii_bus *bus, int addr, u32 *phy_id);
struct phy_device* get_phy_device(struct mii_bus *bus, int addr);
int phy_clear_interrupt(struct phy_device *phydev);
int phy_config_interrupt(struct phy_device *phydev, u32 interrupts);
--
GitLab