diff --git a/drivers/net/ixgbe/ixgbe.h b/drivers/net/ixgbe/ixgbe.h
index 796f189f3879f0735a93e7a90be54693506ad791..9509aee2d361f931a02c8c5f8d17f12ce053297d 100644
--- a/drivers/net/ixgbe/ixgbe.h
+++ b/drivers/net/ixgbe/ixgbe.h
@@ -311,12 +311,15 @@ struct ixgbe_adapter {
unsigned long link_check_timeout;
struct work_struct watchdog_task;
+ struct work_struct sfp_task;
+ struct timer_list sfp_timer;
};
enum ixbge_state_t {
__IXGBE_TESTING,
__IXGBE_RESETTING,
- __IXGBE_DOWN
+ __IXGBE_DOWN,
+ __IXGBE_SFP_MODULE_NOT_FOUND
};
enum ixgbe_boards {
diff --git a/drivers/net/ixgbe/ixgbe_82598.c b/drivers/net/ixgbe/ixgbe_82598.c
index c2cdb042c481b1aed175b19614846e30a8fdf52d..7e09dab0c29f18db5e337f28be200de26097d2f8 100644
--- a/drivers/net/ixgbe/ixgbe_82598.c
+++ b/drivers/net/ixgbe/ixgbe_82598.c
@@ -46,6 +46,8 @@ static s32 ixgbe_setup_copper_link_speed_82598(struct ixgbe_hw *hw,
ixgbe_link_speed speed,
bool autoneg,
bool autoneg_wait_to_complete);
+static s32 ixgbe_read_i2c_eeprom_82598(struct ixgbe_hw *hw, u8 byte_offset,
+ u8 *eeprom_data);
/**
*/
@@ -53,6 +55,8 @@ static s32 ixgbe_get_invariants_82598(struct ixgbe_hw *hw)
{
struct ixgbe_mac_info *mac = &hw->mac;
struct ixgbe_phy_info *phy = &hw->phy;
+ s32 ret_val = 0;
+ u16 list_offset, data_offset;
/* Call PHY identify routine to get the phy type */
ixgbe_identify_phy_generic(hw);
@@ -64,6 +68,27 @@ static s32 ixgbe_get_invariants_82598(struct ixgbe_hw *hw)
phy->ops.get_firmware_version =
&ixgbe_get_phy_firmware_version_tnx;
break;
+ case ixgbe_phy_nl:
+ phy->ops.reset = &ixgbe_reset_phy_nl;
+
+ /* Call SFP+ identify routine to get the SFP+ module type */
+ ret_val = phy->ops.identify_sfp(hw);
+ if (ret_val != 0)
+ goto out;
+ else if (hw->phy.sfp_type == ixgbe_sfp_type_unknown) {
+ ret_val = IXGBE_ERR_SFP_NOT_SUPPORTED;
+ goto out;
+ }
+
+ /* Check to see if SFP+ module is supported */
+ ret_val = ixgbe_get_sfp_init_sequence_offsets(hw,
+ &list_offset,
+ &data_offset);
+ if (ret_val != 0) {
+ ret_val = IXGBE_ERR_SFP_NOT_SUPPORTED;
+ goto out;
+ }
+ break;
default:
break;
}
@@ -82,7 +107,8 @@ static s32 ixgbe_get_invariants_82598(struct ixgbe_hw *hw)
mac->max_rx_queues = IXGBE_82598_MAX_RX_QUEUES;
mac->max_tx_queues = IXGBE_82598_MAX_TX_QUEUES;
- return 0;
+out:
+ return ret_val;
}
/**
@@ -191,7 +217,10 @@ static enum ixgbe_media_type ixgbe_get_media_type_82598(struct ixgbe_hw *hw)
case IXGBE_DEV_ID_82598AF_SINGLE_PORT:
case IXGBE_DEV_ID_82598EB_CX4:
case IXGBE_DEV_ID_82598_CX4_DUAL_PORT:
+ case IXGBE_DEV_ID_82598_DA_DUAL_PORT:
+ case IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM:
case IXGBE_DEV_ID_82598EB_XF_LR:
+ case IXGBE_DEV_ID_82598EB_SFP_LOM:
media_type = ixgbe_media_type_fiber;
break;
case IXGBE_DEV_ID_82598AT:
@@ -399,6 +428,46 @@ static s32 ixgbe_check_mac_link_82598(struct ixgbe_hw *hw,
{
u32 links_reg;
u32 i;
+ u16 link_reg, adapt_comp_reg;
+
+ /*
+ * SERDES PHY requires us to read link status from register 0xC79F.
+ * Bit 0 set indicates link is up/ready; clear indicates link down.
+ * 0xC00C is read to check that the XAUI lanes are active. Bit 0
+ * clear indicates active; set indicates inactive.
+ */
+ if (hw->phy.type == ixgbe_phy_nl) {
+ hw->phy.ops.read_reg(hw, 0xC79F, IXGBE_TWINAX_DEV, &link_reg);
+ hw->phy.ops.read_reg(hw, 0xC79F, IXGBE_TWINAX_DEV, &link_reg);
+ hw->phy.ops.read_reg(hw, 0xC00C, IXGBE_TWINAX_DEV,
+ &adapt_comp_reg);
+ if (link_up_wait_to_complete) {
+ for (i = 0; i < IXGBE_LINK_UP_TIME; i++) {
+ if ((link_reg & 1) &&
+ ((adapt_comp_reg & 1) == 0)) {
+ *link_up = true;
+ break;
+ } else {
+ *link_up = false;
+ }
+ msleep(100);
+ hw->phy.ops.read_reg(hw, 0xC79F,
+ IXGBE_TWINAX_DEV,
+ &link_reg);
+ hw->phy.ops.read_reg(hw, 0xC00C,
+ IXGBE_TWINAX_DEV,
+ &adapt_comp_reg);
+ }
+ } else {
+ if ((link_reg & 1) && ((adapt_comp_reg & 1) == 0))
+ *link_up = true;
+ else
+ *link_up = false;
+ }
+
+ if (*link_up == false)
+ goto out;
+ }
links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS);
if (link_up_wait_to_complete) {
@@ -424,6 +493,7 @@ static s32 ixgbe_check_mac_link_82598(struct ixgbe_hw *hw,
else
*speed = IXGBE_LINK_SPEED_1GB_FULL;
+out:
return 0;
}
@@ -858,6 +928,69 @@ s32 ixgbe_write_analog_reg8_82598(struct ixgbe_hw *hw, u32 reg, u8 val)
return 0;
}
+/**
+ * ixgbe_read_i2c_eeprom_82598 - Read 8 bit EEPROM word of an SFP+ module
+ * over I2C interface through an intermediate phy.
+ * @hw: pointer to hardware structure
+ * @byte_offset: EEPROM byte offset to read
+ * @eeprom_data: value read
+ *
+ * Performs byte read operation to SFP module's EEPROM over I2C interface.
+ **/
+s32 ixgbe_read_i2c_eeprom_82598(struct ixgbe_hw *hw, u8 byte_offset,
+ u8 *eeprom_data)
+{
+ s32 status = 0;
+ u16 sfp_addr = 0;
+ u16 sfp_data = 0;
+ u16 sfp_stat = 0;
+ u32 i;
+
+ if (hw->phy.type == ixgbe_phy_nl) {
+ /*
+ * phy SDA/SCL registers are at addresses 0xC30A to
+ * 0xC30D. These registers are used to talk to the SFP+
+ * module's EEPROM through the SDA/SCL (I2C) interface.
+ */
+ sfp_addr = (IXGBE_I2C_EEPROM_DEV_ADDR << 8) + byte_offset;
+ sfp_addr = (sfp_addr | IXGBE_I2C_EEPROM_READ_MASK);
+ hw->phy.ops.write_reg(hw,
+ IXGBE_MDIO_PMA_PMD_SDA_SCL_ADDR,
+ IXGBE_MDIO_PMA_PMD_DEV_TYPE,
+ sfp_addr);
+
+ /* Poll status */
+ for (i = 0; i < 100; i++) {
+ hw->phy.ops.read_reg(hw,
+ IXGBE_MDIO_PMA_PMD_SDA_SCL_STAT,
+ IXGBE_MDIO_PMA_PMD_DEV_TYPE,
+ &sfp_stat);
+ sfp_stat = sfp_stat & IXGBE_I2C_EEPROM_STATUS_MASK;
+ if (sfp_stat != IXGBE_I2C_EEPROM_STATUS_IN_PROGRESS)
+ break;
+ msleep(10);
+ }
+
+ if (sfp_stat != IXGBE_I2C_EEPROM_STATUS_PASS) {
+ hw_dbg(hw, "EEPROM read did not pass.\n");
+ status = IXGBE_ERR_SFP_NOT_PRESENT;
+ goto out;
+ }
+
+ /* Read data */
+ hw->phy.ops.read_reg(hw, IXGBE_MDIO_PMA_PMD_SDA_SCL_DATA,
+ IXGBE_MDIO_PMA_PMD_DEV_TYPE, &sfp_data);
+
+ *eeprom_data = (u8)(sfp_data >> 8);
+ } else {
+ status = IXGBE_ERR_PHY;
+ goto out;
+ }
+
+out:
+ return status;
+}
+
/**
* ixgbe_get_supported_physical_layer_82598 - Returns physical layer type
* @hw: pointer to hardware structure
@@ -873,8 +1006,12 @@ s32 ixgbe_get_supported_physical_layer_82598(struct ixgbe_hw *hw)
case IXGBE_DEV_ID_82598_CX4_DUAL_PORT:
physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_CX4;
break;
+ case IXGBE_DEV_ID_82598_DA_DUAL_PORT:
+ physical_layer = IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU;
+ break;
case IXGBE_DEV_ID_82598AF_DUAL_PORT:
case IXGBE_DEV_ID_82598AF_SINGLE_PORT:
+ case IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM:
physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_SR;
break;
case IXGBE_DEV_ID_82598EB_XF_LR:
@@ -884,6 +1021,24 @@ s32 ixgbe_get_supported_physical_layer_82598(struct ixgbe_hw *hw)
physical_layer = (IXGBE_PHYSICAL_LAYER_10GBASE_T |
IXGBE_PHYSICAL_LAYER_1000BASE_T);
break;
+ case IXGBE_DEV_ID_82598EB_SFP_LOM:
+ hw->phy.ops.identify_sfp(hw);
+
+ switch (hw->phy.sfp_type) {
+ case ixgbe_sfp_type_da_cu:
+ physical_layer = IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU;
+ break;
+ case ixgbe_sfp_type_sr:
+ physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_SR;
+ break;
+ case ixgbe_sfp_type_lr:
+ physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_LR;
+ break;
+ default:
+ physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;
+ break;
+ }
+ break;
default:
physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;
@@ -935,12 +1090,13 @@ static struct ixgbe_eeprom_operations eeprom_ops_82598 = {
static struct ixgbe_phy_operations phy_ops_82598 = {
.identify = &ixgbe_identify_phy_generic,
- /* .identify_sfp = &ixgbe_identify_sfp_module_generic, */
+ .identify_sfp = &ixgbe_identify_sfp_module_generic,
.reset = &ixgbe_reset_phy_generic,
.read_reg = &ixgbe_read_phy_reg_generic,
.write_reg = &ixgbe_write_phy_reg_generic,
.setup_link = &ixgbe_setup_phy_link_generic,
.setup_link_speed = &ixgbe_setup_phy_link_speed_generic,
+ .read_i2c_eeprom = &ixgbe_read_i2c_eeprom_82598,
};
struct ixgbe_info ixgbe_82598_info = {
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index 91dde9cdab6605bf32f6ccb251128d9c8d32122d..6620397a1fb4b5ce9647406a0a88fa4e4fd84ecf 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -74,8 +74,14 @@ static struct pci_device_id ixgbe_pci_tbl[] = {
board_82598 },
{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598_CX4_DUAL_PORT),
board_82598 },
+ {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598_DA_DUAL_PORT),
+ board_82598 },
+ {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM),
+ board_82598 },
{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598EB_XF_LR),
board_82598 },
+ {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598EB_SFP_LOM),
+ board_82598 },
/* required last entry */
{0, }
@@ -2679,6 +2685,57 @@ err_alloc_queues:
return err;
}
+/**
+ * ixgbe_sfp_timer - worker thread to find a missing module
+ * @data: pointer to our adapter struct
+ **/
+static void ixgbe_sfp_timer(unsigned long data)
+{
+ struct ixgbe_adapter *adapter = (struct ixgbe_adapter *)data;
+
+ /* Do the sfp_timer outside of interrupt context due to the
+ * delays that sfp+ detection requires
+ */
+ schedule_work(&adapter->sfp_task);
+}
+
+/**
+ * ixgbe_sfp_task - worker thread to find a missing module
+ * @work: pointer to work_struct containing our data
+ **/
+static void ixgbe_sfp_task(struct work_struct *work)
+{
+ struct ixgbe_adapter *adapter = container_of(work,
+ struct ixgbe_adapter,
+ sfp_task);
+ struct ixgbe_hw *hw = &adapter->hw;
+
+ if ((hw->phy.type == ixgbe_phy_nl) &&
+ (hw->phy.sfp_type == ixgbe_sfp_type_not_present)) {
+ s32 ret = hw->phy.ops.identify_sfp(hw);
+ if (ret)
+ goto reschedule;
+ ret = hw->phy.ops.reset(hw);
+ if (ret == IXGBE_ERR_SFP_NOT_SUPPORTED) {
+ DPRINTK(PROBE, ERR, "failed to initialize because an "
+ "unsupported SFP+ module type was detected.\n"
+ "Reload the driver after installing a "
+ "supported module.\n");
+ unregister_netdev(adapter->netdev);
+ } else {
+ DPRINTK(PROBE, INFO, "detected SFP+: %d\n",
+ hw->phy.sfp_type);
+ }
+ /* don't need this routine any more */
+ clear_bit(__IXGBE_SFP_MODULE_NOT_FOUND, &adapter->state);
+ }
+ return;
+reschedule:
+ if (test_bit(__IXGBE_SFP_MODULE_NOT_FOUND, &adapter->state))
+ mod_timer(&adapter->sfp_timer,
+ round_jiffies(jiffies + (2 * HZ)));
+}
+
/**
* ixgbe_sw_init - Initialize general software structures (struct ixgbe_adapter)
* @adapter: board private structure to initialize
@@ -4006,11 +4063,31 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
/* PHY */
memcpy(&hw->phy.ops, ii->phy_ops, sizeof(hw->phy.ops));
- /* phy->sfp_type = ixgbe_sfp_type_unknown; */
+ hw->phy.sfp_type = ixgbe_sfp_type_unknown;
+
+ /* set up this timer and work struct before calling get_invariants
+ * which might start the timer
+ */
+ init_timer(&adapter->sfp_timer);
+ adapter->sfp_timer.function = &ixgbe_sfp_timer;
+ adapter->sfp_timer.data = (unsigned long) adapter;
+
+ INIT_WORK(&adapter->sfp_task, ixgbe_sfp_task);
err = ii->get_invariants(hw);
- if (err)
+ if (err == IXGBE_ERR_SFP_NOT_PRESENT) {
+ /* start a kernel thread to watch for a module to arrive */
+ set_bit(__IXGBE_SFP_MODULE_NOT_FOUND, &adapter->state);
+ mod_timer(&adapter->sfp_timer,
+ round_jiffies(jiffies + (2 * HZ)));
+ err = 0;
+ } else if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) {
+ DPRINTK(PROBE, ERR, "failed to load because an "
+ "unsupported SFP+ module type was detected.\n");
goto err_hw_init;
+ } else if (err) {
+ goto err_hw_init;
+ }
/* setup the private structure */
err = ixgbe_sw_init(adapter);
@@ -4144,6 +4221,9 @@ err_hw_init:
err_sw_init:
ixgbe_reset_interrupt_capability(adapter);
err_eeprom:
+ clear_bit(__IXGBE_SFP_MODULE_NOT_FOUND, &adapter->state);
+ del_timer_sync(&adapter->sfp_timer);
+ cancel_work_sync(&adapter->sfp_task);
iounmap(hw->hw_addr);
err_ioremap:
free_netdev(netdev);
@@ -4170,8 +4250,15 @@ static void __devexit ixgbe_remove(struct pci_dev *pdev)
struct ixgbe_adapter *adapter = netdev_priv(netdev);
set_bit(__IXGBE_DOWN, &adapter->state);
+ /* clear the module not found bit to make sure the worker won't
+ * reschedule
+ */
+ clear_bit(__IXGBE_SFP_MODULE_NOT_FOUND, &adapter->state);
del_timer_sync(&adapter->watchdog_timer);
+ del_timer_sync(&adapter->sfp_timer);
+ cancel_work_sync(&adapter->watchdog_task);
+ cancel_work_sync(&adapter->sfp_task);
flush_scheduled_work();
#ifdef CONFIG_IXGBE_DCA
@@ -4182,7 +4269,8 @@ static void __devexit ixgbe_remove(struct pci_dev *pdev)
}
#endif
- unregister_netdev(netdev);
+ if (netdev->reg_state == NETREG_REGISTERED)
+ unregister_netdev(netdev);
ixgbe_reset_interrupt_capability(adapter);
diff --git a/drivers/net/ixgbe/ixgbe_phy.c b/drivers/net/ixgbe/ixgbe_phy.c
index 981e6d8495925e3ae52ad2dbfbffed1768a55485..5a8669aedf6417a244b0b4908f91e1913b530a11 100644
--- a/drivers/net/ixgbe/ixgbe_phy.c
+++ b/drivers/net/ixgbe/ixgbe_phy.c
@@ -127,6 +127,9 @@ static enum ixgbe_phy_type ixgbe_get_phy_type_from_id(u32 phy_id)
case QT2022_PHY_ID:
phy_type = ixgbe_phy_qt;
break;
+ case ATH_PHY_ID:
+ phy_type = ixgbe_phy_nl;
+ break;
default:
phy_type = ixgbe_phy_unknown;
break;
@@ -429,6 +432,261 @@ s32 ixgbe_setup_phy_link_speed_generic(struct ixgbe_hw *hw,
return 0;
}
+/**
+ * ixgbe_reset_phy_nl - Performs a PHY reset
+ * @hw: pointer to hardware structure
+ **/
+s32 ixgbe_reset_phy_nl(struct ixgbe_hw *hw)
+{
+ u16 phy_offset, control, eword, edata, block_crc;
+ bool end_data = false;
+ u16 list_offset, data_offset;
+ u16 phy_data = 0;
+ s32 ret_val = 0;
+ u32 i;
+
+ hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_XS_CONTROL,
+ IXGBE_MDIO_PHY_XS_DEV_TYPE, &phy_data);
+
+ /* reset the PHY and poll for completion */
+ hw->phy.ops.write_reg(hw, IXGBE_MDIO_PHY_XS_CONTROL,
+ IXGBE_MDIO_PHY_XS_DEV_TYPE,
+ (phy_data | IXGBE_MDIO_PHY_XS_RESET));
+
+ for (i = 0; i < 100; i++) {
+ hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_XS_CONTROL,
+ IXGBE_MDIO_PHY_XS_DEV_TYPE, &phy_data);
+ if ((phy_data & IXGBE_MDIO_PHY_XS_RESET) == 0)
+ break;
+ msleep(10);
+ }
+
+ if ((phy_data & IXGBE_MDIO_PHY_XS_RESET) != 0) {
+ hw_dbg(hw, "PHY reset did not complete.\n");
+ ret_val = IXGBE_ERR_PHY;
+ goto out;
+ }
+
+ /* Get init offsets */
+ ret_val = ixgbe_get_sfp_init_sequence_offsets(hw, &list_offset,
+ &data_offset);
+ if (ret_val != 0)
+ goto out;
+
+ ret_val = hw->eeprom.ops.read(hw, data_offset, &block_crc);
+ data_offset++;
+ while (!end_data) {
+ /*
+ * Read control word from PHY init contents offset
+ */
+ ret_val = hw->eeprom.ops.read(hw, data_offset, &eword);
+ control = (eword & IXGBE_CONTROL_MASK_NL) >>
+ IXGBE_CONTROL_SHIFT_NL;
+ edata = eword & IXGBE_DATA_MASK_NL;
+ switch (control) {
+ case IXGBE_DELAY_NL:
+ data_offset++;
+ hw_dbg(hw, "DELAY: %d MS\n", edata);
+ msleep(edata);
+ break;
+ case IXGBE_DATA_NL:
+ hw_dbg(hw, "DATA: \n");
+ data_offset++;
+ hw->eeprom.ops.read(hw, data_offset++,
+ &phy_offset);
+ for (i = 0; i < edata; i++) {
+ hw->eeprom.ops.read(hw, data_offset, &eword);
+ hw->phy.ops.write_reg(hw, phy_offset,
+ IXGBE_TWINAX_DEV, eword);
+ hw_dbg(hw, "Wrote %4.4x to %4.4x\n", eword,
+ phy_offset);
+ data_offset++;
+ phy_offset++;
+ }
+ break;
+ case IXGBE_CONTROL_NL:
+ data_offset++;
+ hw_dbg(hw, "CONTROL: \n");
+ if (edata == IXGBE_CONTROL_EOL_NL) {
+ hw_dbg(hw, "EOL\n");
+ end_data = true;
+ } else if (edata == IXGBE_CONTROL_SOL_NL) {
+ hw_dbg(hw, "SOL\n");
+ } else {
+ hw_dbg(hw, "Bad control value\n");
+ ret_val = IXGBE_ERR_PHY;
+ goto out;
+ }
+ break;
+ default:
+ hw_dbg(hw, "Bad control type\n");
+ ret_val = IXGBE_ERR_PHY;
+ goto out;
+ }
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * ixgbe_identify_sfp_module_generic - Identifies SFP module and assigns
+ * the PHY type.
+ * @hw: pointer to hardware structure
+ *
+ * Searches for and indentifies the SFP module. Assings appropriate PHY type.
+ **/
+s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw)
+{
+ s32 status = IXGBE_ERR_PHY_ADDR_INVALID;
+ u32 vendor_oui = 0;
+ u8 identifier = 0;
+ u8 comp_codes_1g = 0;
+ u8 comp_codes_10g = 0;
+ u8 oui_bytes[4] = {0, 0, 0, 0};
+ u8 transmission_media = 0;
+
+ status = hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_IDENTIFIER,
+ &identifier);
+
+ if (status == IXGBE_ERR_SFP_NOT_PRESENT) {
+ hw->phy.sfp_type = ixgbe_sfp_type_not_present;
+ goto out;
+ }
+
+ if (identifier == IXGBE_SFF_IDENTIFIER_SFP) {
+ hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_1GBE_COMP_CODES,
+ &comp_codes_1g);
+ hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_10GBE_COMP_CODES,
+ &comp_codes_10g);
+ hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_TRANSMISSION_MEDIA,
+ &transmission_media);
+
+ /* ID Module
+ * =========
+ * 0 SFP_DA_CU
+ * 1 SFP_SR
+ * 2 SFP_LR
+ */
+ if (transmission_media & IXGBE_SFF_TWIN_AX_CAPABLE)
+ hw->phy.sfp_type = ixgbe_sfp_type_da_cu;
+ else if (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE)
+ hw->phy.sfp_type = ixgbe_sfp_type_sr;
+ else if (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE)
+ hw->phy.sfp_type = ixgbe_sfp_type_lr;
+ else
+ hw->phy.sfp_type = ixgbe_sfp_type_unknown;
+
+ /* Determine PHY vendor */
+ if (hw->phy.type == ixgbe_phy_unknown) {
+ hw->phy.id = identifier;
+ hw->phy.ops.read_i2c_eeprom(hw,
+ IXGBE_SFF_VENDOR_OUI_BYTE0,
+ &oui_bytes[0]);
+ hw->phy.ops.read_i2c_eeprom(hw,
+ IXGBE_SFF_VENDOR_OUI_BYTE1,
+ &oui_bytes[1]);
+ hw->phy.ops.read_i2c_eeprom(hw,
+ IXGBE_SFF_VENDOR_OUI_BYTE2,
+ &oui_bytes[2]);
+
+ vendor_oui =
+ ((oui_bytes[0] << IXGBE_SFF_VENDOR_OUI_BYTE0_SHIFT) |
+ (oui_bytes[1] << IXGBE_SFF_VENDOR_OUI_BYTE1_SHIFT) |
+ (oui_bytes[2] << IXGBE_SFF_VENDOR_OUI_BYTE2_SHIFT));
+
+ switch (vendor_oui) {
+ case IXGBE_SFF_VENDOR_OUI_TYCO:
+ if (transmission_media &
+ IXGBE_SFF_TWIN_AX_CAPABLE)
+ hw->phy.type = ixgbe_phy_tw_tyco;
+ break;
+ case IXGBE_SFF_VENDOR_OUI_FTL:
+ hw->phy.type = ixgbe_phy_sfp_ftl;
+ break;
+ case IXGBE_SFF_VENDOR_OUI_AVAGO:
+ hw->phy.type = ixgbe_phy_sfp_avago;
+ break;
+ default:
+ if (transmission_media &
+ IXGBE_SFF_TWIN_AX_CAPABLE)
+ hw->phy.type = ixgbe_phy_tw_unknown;
+ else
+ hw->phy.type = ixgbe_phy_sfp_unknown;
+ break;
+ }
+ }
+ status = 0;
+ }
+
+out:
+ return status;
+}
+
+/**
+ * ixgbe_get_sfp_init_sequence_offsets - Checks the MAC's EEPROM to see
+ * if it supports a given SFP+ module type, if so it returns the offsets to the
+ * phy init sequence block.
+ * @hw: pointer to hardware structure
+ * @list_offset: offset to the SFP ID list
+ * @data_offset: offset to the SFP data block
+ **/
+s32 ixgbe_get_sfp_init_sequence_offsets(struct ixgbe_hw *hw,
+ u16 *list_offset,
+ u16 *data_offset)
+{
+ u16 sfp_id;
+
+ if (hw->phy.sfp_type == ixgbe_sfp_type_unknown)
+ return IXGBE_ERR_SFP_NOT_SUPPORTED;
+
+ if (hw->phy.sfp_type == ixgbe_sfp_type_not_present)
+ return IXGBE_ERR_SFP_NOT_PRESENT;
+
+ if ((hw->device_id == IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM) &&
+ (hw->phy.sfp_type == ixgbe_sfp_type_da_cu))
+ return IXGBE_ERR_SFP_NOT_SUPPORTED;
+
+ /* Read offset to PHY init contents */
+ hw->eeprom.ops.read(hw, IXGBE_PHY_INIT_OFFSET_NL, list_offset);
+
+ if ((!*list_offset) || (*list_offset == 0xFFFF))
+ return IXGBE_ERR_PHY;
+
+ /* Shift offset to first ID word */
+ (*list_offset)++;
+
+ /*
+ * Find the matching SFP ID in the EEPROM
+ * and program the init sequence
+ */
+ hw->eeprom.ops.read(hw, *list_offset, &sfp_id);
+
+ while (sfp_id != IXGBE_PHY_INIT_END_NL) {
+ if (sfp_id == hw->phy.sfp_type) {
+ (*list_offset)++;
+ hw->eeprom.ops.read(hw, *list_offset, data_offset);
+ if ((!*data_offset) || (*data_offset == 0xFFFF)) {
+ hw_dbg(hw, "SFP+ module not supported\n");
+ return IXGBE_ERR_SFP_NOT_SUPPORTED;
+ } else {
+ break;
+ }
+ } else {
+ (*list_offset) += 2;
+ if (hw->eeprom.ops.read(hw, *list_offset, &sfp_id))
+ return IXGBE_ERR_PHY;
+ }
+ }
+
+ if (sfp_id == IXGBE_PHY_INIT_END_NL) {
+ hw_dbg(hw, "No matching SFP+ module found\n");
+ return IXGBE_ERR_SFP_NOT_SUPPORTED;
+ }
+
+ return 0;
+}
+
/**
* ixgbe_check_phy_link_tnx - Determine link and speed status
* @hw: pointer to hardware structure
diff --git a/drivers/net/ixgbe/ixgbe_phy.h b/drivers/net/ixgbe/ixgbe_phy.h
index 5cc063d027709fd84a5029ae3dc676276d1138eb..43a97bc420f54c0dbda983bdcbb214aad955f94b 100644
--- a/drivers/net/ixgbe/ixgbe_phy.h
+++ b/drivers/net/ixgbe/ixgbe_phy.h
@@ -63,6 +63,18 @@
#define IXGBE_SFF_VENDOR_OUI_FTL 0x00906500
#define IXGBE_SFF_VENDOR_OUI_AVAGO 0x00176A00
+/* I2C SDA and SCL timing parameters for standard mode */
+#define IXGBE_I2C_T_HD_STA 4
+#define IXGBE_I2C_T_LOW 5
+#define IXGBE_I2C_T_HIGH 4
+#define IXGBE_I2C_T_SU_STA 5
+#define IXGBE_I2C_T_HD_DATA 5
+#define IXGBE_I2C_T_SU_DATA 1
+#define IXGBE_I2C_T_RISE 1
+#define IXGBE_I2C_T_FALL 1
+#define IXGBE_I2C_T_SU_STO 4
+#define IXGBE_I2C_T_BUF 5
+
s32 ixgbe_init_phy_ops_generic(struct ixgbe_hw *hw);
s32 ixgbe_identify_phy_generic(struct ixgbe_hw *hw);
@@ -84,4 +96,10 @@ s32 ixgbe_check_phy_link_tnx(struct ixgbe_hw *hw,
s32 ixgbe_get_phy_firmware_version_tnx(struct ixgbe_hw *hw,
u16 *firmware_version);
+s32 ixgbe_reset_phy_nl(struct ixgbe_hw *hw);
+s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw);
+s32 ixgbe_get_sfp_init_sequence_offsets(struct ixgbe_hw *hw,
+ u16 *list_offset,
+ u16 *data_offset);
+
#endif /* _IXGBE_PHY_H_ */
diff --git a/drivers/net/ixgbe/ixgbe_type.h b/drivers/net/ixgbe/ixgbe_type.h
index 51df39dae81654ebaf1a84a6eb73c0d77136e9ad..83a11ff9ffd190f8aa2ec0db65c63f39d9349aba 100644
--- a/drivers/net/ixgbe/ixgbe_type.h
+++ b/drivers/net/ixgbe/ixgbe_type.h
@@ -36,9 +36,12 @@
/* Device IDs */
#define IXGBE_DEV_ID_82598AF_DUAL_PORT 0x10C6
#define IXGBE_DEV_ID_82598AF_SINGLE_PORT 0x10C7
+#define IXGBE_DEV_ID_82598EB_SFP_LOM 0x10DB
#define IXGBE_DEV_ID_82598AT 0x10C8
#define IXGBE_DEV_ID_82598EB_CX4 0x10DD
#define IXGBE_DEV_ID_82598_CX4_DUAL_PORT 0x10EC
+#define IXGBE_DEV_ID_82598_DA_DUAL_PORT 0x10F1
+#define IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM 0x10E1
#define IXGBE_DEV_ID_82598EB_XF_LR 0x10F4
/* General Registers */
@@ -453,6 +456,7 @@
#define IXGBE_MDIO_PHY_XS_DEV_TYPE 0x4
#define IXGBE_MDIO_AUTO_NEG_DEV_TYPE 0x7
#define IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE 0x1E /* Device 30 */
+#define IXGBE_TWINAX_DEV 1
#define IXGBE_MDIO_COMMAND_TIMEOUT 100 /* PHY Timeout for 1 GB mode */
@@ -488,14 +492,27 @@
#define IXGBE_PHY_REVISION_MASK 0xFFFFFFF0
#define IXGBE_MAX_PHY_ADDR 32
-/* PHY IDs*/
+/* PHY IDs */
#define TN1010_PHY_ID 0x00A19410
#define TNX_FW_REV 0xB
#define QT2022_PHY_ID 0x0043A400
+#define ATH_PHY_ID 0x03429050
/* PHY Types */
#define IXGBE_M88E1145_E_PHY_ID 0x01410CD0
+/* Special PHY Init Routine */
+#define IXGBE_PHY_INIT_OFFSET_NL 0x002B
+#define IXGBE_PHY_INIT_END_NL 0xFFFF
+#define IXGBE_CONTROL_MASK_NL 0xF000
+#define IXGBE_DATA_MASK_NL 0x0FFF
+#define IXGBE_CONTROL_SHIFT_NL 12
+#define IXGBE_DELAY_NL 0
+#define IXGBE_DATA_NL 1
+#define IXGBE_CONTROL_NL 0x000F
+#define IXGBE_CONTROL_EOL_NL 0x0FFF
+#define IXGBE_CONTROL_SOL_NL 0x0000
+
/* General purpose Interrupt Enable */
#define IXGBE_SDP0_GPIEN 0x00000001 /* SDP0 */
#define IXGBE_SDP1_GPIEN 0x00000002 /* SDP1 */
@@ -1208,6 +1225,7 @@ enum ixgbe_phy_type {
ixgbe_phy_tn,
ixgbe_phy_qt,
ixgbe_phy_xaui,
+ ixgbe_phy_nl,
ixgbe_phy_tw_tyco,
ixgbe_phy_tw_unknown,
ixgbe_phy_sfp_avago,
@@ -1229,6 +1247,7 @@ enum ixgbe_sfp_type {
ixgbe_sfp_type_da_cu = 0,
ixgbe_sfp_type_sr = 1,
ixgbe_sfp_type_lr = 2,
+ ixgbe_sfp_type_not_present = 0xFFFE,
ixgbe_sfp_type_unknown = 0xFFFF
};
@@ -1492,6 +1511,7 @@ struct ixgbe_info {
#define IXGBE_ERR_PHY_ADDR_INVALID -17
#define IXGBE_ERR_I2C -18
#define IXGBE_ERR_SFP_NOT_SUPPORTED -19
+#define IXGBE_ERR_SFP_NOT_PRESENT -20
#define IXGBE_NOT_IMPLEMENTED 0x7FFFFFFF
#endif /* _IXGBE_TYPE_H_ */