Commit c3152d47 authored by Lendacky, Thomas's avatar Lendacky, Thomas Committed by David S. Miller
Browse files

amd-xgbe-phy: Change auto-negotiation logic



The auto negotiation logic was geared to being the initiator of the
auto negotiation. This presented problems when auto negotiation was
initiated by the remote end. Change the auto negotiation logic to
make use of the auto negotiation event interrupt thus allowing the
auto negotiation state machine to function properly in either scenario.
This also removes the polling during auto-negotiation.
Signed-off-by: default avatarTom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent a83ef427
......@@ -7,6 +7,9 @@ Required properties:
- SerDes Rx/Tx registers
- SerDes integration registers (1/2)
- SerDes integration registers (2/2)
- interrupt-parent: Should be the phandle for the interrupt controller
that services interrupts for this device
- interrupts: Should contain the amd-xgbe-phy interrupt.
Optional properties:
- amd,speed-set: Speed capabilities of the device
......@@ -19,5 +22,7 @@ Example:
reg = <0 0xe1240800 0 0x00400>,
<0 0xe1250000 0 0x00060>,
<0 0xe1250080 0 0x00004>;
interrupt-parent = <&gic>;
interrupts = <0 323 4>;
amd,speed-set = <0>;
};
......@@ -115,6 +115,7 @@
*/
#include <linux/phy.h>
#include <linux/mdio.h>
#include <linux/clk.h>
#include <linux/bitrev.h>
#include <linux/crc32.h>
......@@ -673,6 +674,9 @@ static void xgbe_enable_mac_interrupts(struct xgbe_prv_data *pdata)
static int xgbe_set_gmii_speed(struct xgbe_prv_data *pdata)
{
if (XGMAC_IOREAD_BITS(pdata, MAC_TCR, SS) == 0x3)
return 0;
XGMAC_IOWRITE_BITS(pdata, MAC_TCR, SS, 0x3);
return 0;
......@@ -680,6 +684,9 @@ static int xgbe_set_gmii_speed(struct xgbe_prv_data *pdata)
static int xgbe_set_gmii_2500_speed(struct xgbe_prv_data *pdata)
{
if (XGMAC_IOREAD_BITS(pdata, MAC_TCR, SS) == 0x2)
return 0;
XGMAC_IOWRITE_BITS(pdata, MAC_TCR, SS, 0x2);
return 0;
......@@ -687,6 +694,9 @@ static int xgbe_set_gmii_2500_speed(struct xgbe_prv_data *pdata)
static int xgbe_set_xgmii_speed(struct xgbe_prv_data *pdata)
{
if (XGMAC_IOREAD_BITS(pdata, MAC_TCR, SS) == 0)
return 0;
XGMAC_IOWRITE_BITS(pdata, MAC_TCR, SS, 0);
return 0;
......@@ -881,6 +891,23 @@ static void xgbe_write_mmd_regs(struct xgbe_prv_data *pdata, int prtad,
else
mmd_address = (pdata->mdio_mmd << 16) | (mmd_reg & 0xffff);
/* If the PCS is changing modes, match the MAC speed to it */
if (((mmd_address >> 16) == MDIO_MMD_PCS) &&
((mmd_address & 0xffff) == MDIO_CTRL2)) {
struct phy_device *phydev = pdata->phydev;
if (mmd_data & MDIO_PCS_CTRL2_TYPE) {
/* KX mode */
if (phydev->supported & SUPPORTED_1000baseKX_Full)
xgbe_set_gmii_speed(pdata);
else
xgbe_set_gmii_2500_speed(pdata);
} else {
/* KR mode */
xgbe_set_xgmii_speed(pdata);
}
}
/* The PCS registers are accessed using mmio. The underlying APB3
* management interface uses indirect addressing to access the MMD
* register sets. This requires accessing of the PCS register in two
......
This diff is collapsed.
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment