Commit c2798e93 authored by Vimal Singh's avatar Vimal Singh Committed by Tony Lindgren
Browse files

omap3: SDP: Introducing 'board-sdp-flash.c' for flash init



This patch adds 'board-sdp-flash.c', which could be utilized
by boards similar to 3430SDP. (For ex: 2430sdp, 36030sdp).

This file does initialization for all three flash devices present
in SDP boards (NOR, NAND, OneNAND), by finding there 'cs' number
dynamically using switch setting information (S8: 1-4).
This also expects partition information from core board files (for
ex: board-3430sdp.c). Which allows to choose different default
partitions for different boards.

A new structure is created for this purpose: 'flash_partitions'
in 'mach/board-sdp.h'. This has two members:
1. struct mtd_partition *parts
2. int nr_parts

A board file is expected to fill this structure and pass it to
'sdp-flsash-init'. Partition information should be passed in
structure array of 'flash_partitions'. Partition information should
be passed in below sequence in array:
NOR
OneNAND
NAND
Signed-off-by: default avatarVimal Singh <vimalsingh@ti.com>
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
parent 2f70a1e9
/*
* board-sdp-flash.c
* Modified from mach-omap2/board-3430sdp-flash.c
*
* Copyright (C) 2009 Nokia Corporation
* Copyright (C) 2009 Texas Instruments
*
* Vimal Singh <vimalsingh@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/mtd/physmap.h>
#include <linux/io.h>
#include <plat/gpmc.h>
#include <plat/nand.h>
#include <plat/onenand.h>
#include <plat/tc.h>
#include <mach/board-sdp.h>
#define REG_FPGA_REV 0x10
#define REG_FPGA_DIP_SWITCH_INPUT2 0x60
#define MAX_SUPPORTED_GPMC_CONFIG 3
#define DEBUG_BASE 0x08000000 /* debug board */
#define PDC_NOR 1
#define PDC_NAND 2
#define PDC_ONENAND 3
#define DBG_MPDB 4
/* various memory sizes */
#define FLASH_SIZE_SDPV1 SZ_64M /* NOR flash (64 Meg aligned) */
#define FLASH_SIZE_SDPV2 SZ_128M /* NOR flash (256 Meg aligned) */
/*
* SDP3430 V2 Board CS organization
* Different from SDP3430 V1. Now 4 switches used to specify CS
*
* See also the Switch S8 settings in the comments.
*
* REVISIT: Add support for 2430 SDP
*/
static const unsigned char chip_sel_sdp[][GPMC_CS_NUM] = {
{PDC_NOR, PDC_NAND, PDC_ONENAND, DBG_MPDB, 0, 0, 0, 0}, /* S8:1111 */
{PDC_ONENAND, PDC_NAND, PDC_NOR, DBG_MPDB, 0, 0, 0, 0}, /* S8:1110 */
{PDC_NAND, PDC_ONENAND, PDC_NOR, DBG_MPDB, 0, 0, 0, 0}, /* S8:1101 */
};
static struct physmap_flash_data sdp_nor_data = {
.width = 2,
};
static struct resource sdp_nor_resource = {
.flags = IORESOURCE_MEM,
};
static struct platform_device sdp_nor_device = {
.name = "physmap-flash",
.id = 0,
.dev = {
.platform_data = &sdp_nor_data,
},
.num_resources = 1,
.resource = &sdp_nor_resource,
};
static void
__init board_nor_init(struct flash_partitions sdp_nor_parts, u8 cs)
{
int err;
sdp_nor_data.parts = sdp_nor_parts.parts;
sdp_nor_data.nr_parts = sdp_nor_parts.nr_parts;
/* Configure start address and size of NOR device */
if (omap_rev() >= OMAP3430_REV_ES1_0) {
err = gpmc_cs_request(cs, FLASH_SIZE_SDPV2 - 1,
(unsigned long *)&sdp_nor_resource.start);
sdp_nor_resource.end = sdp_nor_resource.start
+ FLASH_SIZE_SDPV2 - 1;
} else {
err = gpmc_cs_request(cs, FLASH_SIZE_SDPV1 - 1,
(unsigned long *)&sdp_nor_resource.start);
sdp_nor_resource.end = sdp_nor_resource.start
+ FLASH_SIZE_SDPV1 - 1;
}
if (err < 0) {
printk(KERN_ERR "NOR: Can't request GPMC CS\n");
return;
}
if (platform_device_register(&sdp_nor_device) < 0)
printk(KERN_ERR "Unable to register NOR device\n");
}
#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
static struct omap_onenand_platform_data board_onenand_data = {
.dma_channel = -1, /* disable DMA in OMAP OneNAND driver */
};
static void
__init board_onenand_init(struct flash_partitions sdp_onenand_parts, u8 cs)
{
board_onenand_data.cs = cs;
board_onenand_data.parts = sdp_onenand_parts.parts;
board_onenand_data.nr_parts = sdp_onenand_parts.nr_parts;
gpmc_onenand_init(&board_onenand_data);
}
#else
static void
__init board_onenand_init(struct flash_partitions sdp_onenand_parts, u8 cs)
{
}
#endif /* CONFIG_MTD_ONENAND_OMAP2 || CONFIG_MTD_ONENAND_OMAP2_MODULE */
#if defined(CONFIG_MTD_NAND_OMAP2) || \
defined(CONFIG_MTD_NAND_OMAP2_MODULE)
/* Note that all values in this struct are in nanoseconds */
static struct gpmc_timings nand_timings = {
.sync_clk = 0,
.cs_on = 0,
.cs_rd_off = 36,
.cs_wr_off = 36,
.adv_on = 6,
.adv_rd_off = 24,
.adv_wr_off = 36,
.we_off = 30,
.oe_off = 48,
.access = 54,
.rd_cycle = 72,
.wr_cycle = 72,
.wr_access = 30,
.wr_data_mux_bus = 0,
};
static struct omap_nand_platform_data sdp_nand_data = {
.nand_setup = NULL,
.gpmc_t = &nand_timings,
.dma_channel = -1, /* disable DMA in OMAP NAND driver */
.dev_ready = NULL,
.devsize = 0, /* '0' for 8-bit, '1' for 16-bit device */
};
static void
__init board_nand_init(struct flash_partitions sdp_nand_parts, u8 cs)
{
sdp_nand_data.cs = cs;
sdp_nand_data.parts = sdp_nand_parts.parts;
sdp_nand_data.nr_parts = sdp_nand_parts.nr_parts;
sdp_nand_data.gpmc_cs_baseaddr = (void *)(OMAP34XX_GPMC_VIRT +
GPMC_CS0_BASE +
cs * GPMC_CS_SIZE);
sdp_nand_data.gpmc_baseaddr = (void *) (OMAP34XX_GPMC_VIRT);
gpmc_nand_init(&sdp_nand_data);
}
#else
static void
__init board_nand_init(struct flash_partitions sdp_nand_parts, u8 cs)
{
}
#endif /* CONFIG_MTD_NAND_OMAP2 || CONFIG_MTD_NAND_OMAP2_MODULE */
/**
* get_gpmc0_type - Reads the FPGA DIP_SWITCH_INPUT_REGISTER2 to get
* the various cs values.
*/
static u8 get_gpmc0_type(void)
{
u8 cs = 0;
void __iomem *fpga_map_addr;
fpga_map_addr = ioremap(DEBUG_BASE, 4096);
if (!fpga_map_addr)
return -ENOMEM;
if (!(__raw_readw(fpga_map_addr + REG_FPGA_REV)))
/* we dont have an DEBUG FPGA??? */
/* Depend on #defines!! default to strata boot return param */
goto unmap;
/* S8-DIP-OFF = 1, S8-DIP-ON = 0 */
cs = __raw_readw(fpga_map_addr + REG_FPGA_DIP_SWITCH_INPUT2) & 0xf;
/* ES2.0 SDP's onwards 4 dip switches are provided for CS */
if (omap_rev() >= OMAP3430_REV_ES1_0)
/* change (S8-1:4=DS-2:0) to (S8-4:1=DS-2:0) */
cs = ((cs & 8) >> 3) | ((cs & 4) >> 1) |
((cs & 2) << 1) | ((cs & 1) << 3);
else
/* change (S8-1:3=DS-2:0) to (S8-3:1=DS-2:0) */
cs = ((cs & 4) >> 2) | (cs & 2) | ((cs & 1) << 2);
unmap:
iounmap(fpga_map_addr);
return cs;
}
/**
* sdp3430_flash_init - Identify devices connected to GPMC and register.
*
* @return - void.
*/
void __init sdp_flash_init(struct flash_partitions sdp_partition_info[])
{
u8 cs = 0;
u8 norcs = GPMC_CS_NUM + 1;
u8 nandcs = GPMC_CS_NUM + 1;
u8 onenandcs = GPMC_CS_NUM + 1;
u8 idx;
unsigned char *config_sel = NULL;
/* REVISIT: Is this return correct idx for 2430 SDP?
* for which cs configuration matches for 2430 SDP?
*/
idx = get_gpmc0_type();
if (idx >= MAX_SUPPORTED_GPMC_CONFIG) {
printk(KERN_ERR "%s: Invalid chip select: %d\n", __func__, cs);
return;
}
config_sel = (unsigned char *)(chip_sel_sdp[idx]);
while (cs < GPMC_CS_NUM) {
switch (config_sel[cs]) {
case PDC_NOR:
if (norcs > GPMC_CS_NUM)
norcs = cs;
break;
case PDC_NAND:
if (nandcs > GPMC_CS_NUM)
nandcs = cs;
break;
case PDC_ONENAND:
if (onenandcs > GPMC_CS_NUM)
onenandcs = cs;
break;
};
cs++;
}
if (norcs > GPMC_CS_NUM)
printk(KERN_INFO "OneNAND: Unable to find configuration "
" in GPMC\n ");
else
board_nor_init(sdp_partition_info[0], norcs);
if (onenandcs > GPMC_CS_NUM)
printk(KERN_INFO "OneNAND: Unable to find configuration "
" in GPMC\n ");
else
board_onenand_init(sdp_partition_info[1], onenandcs);
if (nandcs > GPMC_CS_NUM)
printk(KERN_INFO "NAND: Unable to find configuration "
" in GPMC\n ");
else
board_nand_init(sdp_partition_info[2], nandcs);
}
/*
* board-sdp.h
*
* Information structures for SDP-specific board config data
*
* Copyright (C) 2009 Nokia Corporation
* Copyright (C) 2009 Texas Instruments
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
struct flash_partitions {
struct mtd_partition *parts;
int nr_parts;
};
extern void sdp_flash_init(struct flash_partitions []);
......@@ -27,6 +27,8 @@
#define GPMC_CONFIG 0x50
#define GPMC_STATUS 0x54
#define GPMC_CS0_BASE 0x60
#define GPMC_CS_SIZE 0x30
#define GPMC_CONFIG1_WRAPBURST_SUPP (1 << 31)
#define GPMC_CONFIG1_READMULTIPLE_SUPP (1 << 30)
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment