All new accounts created on Gitlab now require administrator approval. If you invite any collaborators, please let Flux staff know so they can approve the accounts.

Commit bf96208f authored by Wolfram Sang's avatar Wolfram Sang Committed by Ulf Hansson

mmc: tmio: refactor set_clock a little

Some of the indentation made the code awful to read. Fix that. Also,
introduce defines instead of magic hex values. Note that this includes
one change: We mask out know 0xff instead of 0x1ff. But 0x100 has always
been the clock enable bit. It doesn't make any sense to set it depending
on the clock calculation. Update copyright notices, too. I'll be working
on those files some more in the future.
Signed-off-by: default avatarWolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: default avatarUlf Hansson <ulf.hansson@linaro.org>
parent 16a65524
/*
* linux/drivers/mmc/host/tmio_mmc_pio.c
*
* Copyright (C) 2016 Sang Engineering, Wolfram Sang
* Copyright (C) 2015-16 Renesas Electronics Corporation
* Copyright (C) 2011 Guennadi Liakhovetski
* Copyright (C) 2007 Ian Molton
* Copyright (C) 2004 Ian Molton
......@@ -159,19 +161,20 @@ static void tmio_mmc_set_clock(struct tmio_mmc_host *host,
if (new_clock) {
for (clock = host->mmc->f_min, clk = 0x80000080;
new_clock >= (clock<<1); clk >>= 1)
new_clock >= (clock << 1);
clk >>= 1)
clock <<= 1;
/* 1/1 clock is option */
if ((host->pdata->flags & TMIO_MMC_CLK_ACTUAL) &&
((clk >> 22) & 0x1))
((clk >> 22) & 0x1))
clk |= 0xff;
}
if (host->set_clk_div)
host->set_clk_div(host->pdev, (clk>>22) & 1);
host->set_clk_div(host->pdev, (clk >> 22) & 1);
sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, clk & 0x1ff);
sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, clk & CLK_CTL_DIV_MASK);
if (!(host->pdata->flags & TMIO_MMC_FAST_CLK_CHG))
msleep(10);
}
......@@ -183,14 +186,14 @@ static void tmio_mmc_clk_stop(struct tmio_mmc_host *host)
msleep(10);
}
sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, ~0x0100 &
sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, ~CLK_CTL_SCLKEN &
sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL));
msleep(host->pdata->flags & TMIO_MMC_FAST_CLK_CHG ? 5 : 10);
}
static void tmio_mmc_clk_start(struct tmio_mmc_host *host)
{
sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, 0x0100 |
sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, CLK_CTL_SCLKEN |
sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL));
msleep(host->pdata->flags & TMIO_MMC_FAST_CLK_CHG ? 1 : 10);
......
/*
* include/linux/mmc/tmio.h
*
* Copyright (C) 2016 Sang Engineering, Wolfram Sang
* Copyright (C) 2015-16 Renesas Electronics Corporation
* Copyright (C) 2007 Ian Molton
* Copyright (C) 2004 Ian Molton
*
......@@ -61,6 +63,9 @@
#define TMIO_STAT_CMD_BUSY 0x40000000
#define TMIO_STAT_ILL_ACCESS 0x80000000
#define CLK_CTL_DIV_MASK 0xff
#define CLK_CTL_SCLKEN BIT(8)
#define TMIO_BBS 512 /* Boot block size */
#endif /* LINUX_MMC_TMIO_H */
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment