Commit bdb2dfb2 authored by Rafał Miłecki's avatar Rafał Miłecki Committed by John W. Linville
Browse files

b43: HT-PHY: upload PHY values when switching channel



After calibrating radio you can find few PHY writes in MMIO dumps:
 phy_read(0x0009) -> 0x0000
phy_write(0x01ce) <- 0x03dd
phy_write(0x01cf) <- 0x03d9
phy_write(0x01d0) <- 0x03d5
phy_write(0x01d1) <- 0x0424
phy_write(0x01d2) <- 0x0429
phy_write(0x01d3) <- 0x042d
By comparing to N-PHY code we found out that they are PHY tables for
channel switching plus band info read at the beginning.
Signed-off-by: default avatarRafał Miłecki <zajec5@gmail.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent 1a931392
......@@ -82,7 +82,21 @@ static void b43_phy_ht_channel_setup(struct b43_wldev *dev,
const struct b43_phy_ht_channeltab_e_phy *e,
struct ieee80211_channel *new_channel)
{
/* TODO */
bool old_band_5ghz;
old_band_5ghz = b43_phy_read(dev, B43_PHY_HT_BANDCTL) & 0; /* FIXME */
if (new_channel->band == IEEE80211_BAND_5GHZ && !old_band_5ghz) {
/* TODO */
} else if (new_channel->band == IEEE80211_BAND_2GHZ && old_band_5ghz) {
/* TODO */
}
b43_phy_write(dev, B43_PHY_HT_BW1, e->bw1);
b43_phy_write(dev, B43_PHY_HT_BW2, e->bw2);
b43_phy_write(dev, B43_PHY_HT_BW3, e->bw3);
b43_phy_write(dev, B43_PHY_HT_BW4, e->bw4);
b43_phy_write(dev, B43_PHY_HT_BW5, e->bw5);
b43_phy_write(dev, B43_PHY_HT_BW6, e->bw6);
}
static int b43_phy_ht_set_channel(struct b43_wldev *dev,
......
......@@ -4,9 +4,16 @@
#include "phy_common.h"
#define B43_PHY_HT_BANDCTL 0x009 /* Band control */
#define B43_PHY_HT_TABLE_ADDR 0x072 /* Table address */
#define B43_PHY_HT_TABLE_DATALO 0x073 /* Table data low */
#define B43_PHY_HT_TABLE_DATAHI 0x074 /* Table data high */
#define B43_PHY_HT_BW1 0x1CE
#define B43_PHY_HT_BW2 0x1CF
#define B43_PHY_HT_BW3 0x1D0
#define B43_PHY_HT_BW4 0x1D1
#define B43_PHY_HT_BW5 0x1D2
#define B43_PHY_HT_BW6 0x1D3
#define B43_PHY_HT_RF_CTL1 B43_PHY_EXTG(0x010)
......@@ -20,7 +27,12 @@
/* Values for PHY registers used on channel switching */
struct b43_phy_ht_channeltab_e_phy {
/* TODO */
u16 bw1;
u16 bw2;
u16 bw3;
u16 bw4;
u16 bw5;
u16 bw6;
};
......
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment