at91: switch to CLKDEV_LOOKUP

we do not change the clock naming convention so does not need to switch
the AVR32 yet
Signed-off-by: default avatarJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: default avatarNicolas Ferre <nicolas.ferre@atmel.com>
Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
parent 1b021a3b
......@@ -294,6 +294,7 @@ config ARCH_AT91
bool "Atmel AT91"
select ARCH_REQUIRE_GPIOLIB
select HAVE_CLK
select CLKDEV_LOOKUP
help
This enables support for systems based on the Atmel AT91RM9200,
AT91SAM9 and AT91CAP9 processors.
......
......@@ -205,6 +205,21 @@ static struct clk *periph_clocks[] __initdata = {
/* irq0 .. irq2 */
};
static struct clk_lookup periph_clocks_lookups[] = {
CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk),
CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk),
CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk),
CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk),
CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk),
};
static struct clk_lookup usart_clocks_lookups[] = {
CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck),
CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk),
CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk),
CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk),
};
/*
* The five programmable clocks.
* You must configure pin multiplexing to bring these signals out.
......@@ -262,6 +277,11 @@ static void __init at572d940hf_register_clocks(void)
for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
clk_register(periph_clocks[i]);
clkdev_add_table(periph_clocks_lookups,
ARRAY_SIZE(periph_clocks_lookups));
clkdev_add_table(usart_clocks_lookups,
ARRAY_SIZE(usart_clocks_lookups));
clk_register(&pck0);
clk_register(&pck1);
clk_register(&pck2);
......@@ -272,6 +292,18 @@ static void __init at572d940hf_register_clocks(void)
clk_register(&hck1);
}
static struct clk_lookup console_clock_lookup;
void __init at572d940hf_set_console_clock(int id)
{
if (id >= ARRAY_SIZE(usart_clocks_lookups))
return;
console_clock_lookup.con_id = "usart";
console_clock_lookup.clk = usart_clocks_lookups[id].clk;
clkdev_add(&console_clock_lookup);
}
/* --------------------------------------------------------------------
* GPIO
* -------------------------------------------------------------------- */
......
......@@ -532,7 +532,6 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
at91_set_A_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */
at91_set_A_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */
at91_clock_associate("spi0_clk", &at572d940hf_spi0_device.dev, "spi_clk");
platform_device_register(&at572d940hf_spi0_device);
}
if (enable_spi1) {
......@@ -540,7 +539,6 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
at91_set_A_periph(AT91_PIN_PC1, 0); /* SPI1_MOSI */
at91_set_A_periph(AT91_PIN_PC2, 0); /* SPI1_SPCK */
at91_clock_associate("spi1_clk", &at572d940hf_spi1_device.dev, "spi_clk");
platform_device_register(&at572d940hf_spi1_device);
}
}
......@@ -587,10 +585,6 @@ static struct platform_device at572d940hf_tcb_device = {
static void __init at91_add_device_tc(void)
{
/* this chip has a separate clock and irq for each TC channel */
at91_clock_associate("tc0_clk", &at572d940hf_tcb_device.dev, "t0_clk");
at91_clock_associate("tc1_clk", &at572d940hf_tcb_device.dev, "t1_clk");
at91_clock_associate("tc2_clk", &at572d940hf_tcb_device.dev, "t2_clk");
platform_device_register(&at572d940hf_tcb_device);
}
#else
......@@ -828,22 +822,18 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
case 0: /* DBGU */
pdev = &at572d940hf_dbgu_device;
configure_dbgu_pins();
at91_clock_associate("mck", &pdev->dev, "usart");
break;
case AT572D940HF_ID_US0:
pdev = &at572d940hf_uart0_device;
configure_usart0_pins(pins);
at91_clock_associate("usart0_clk", &pdev->dev, "usart");
break;
case AT572D940HF_ID_US1:
pdev = &at572d940hf_uart1_device;
configure_usart1_pins(pins);
at91_clock_associate("usart1_clk", &pdev->dev, "usart");
break;
case AT572D940HF_ID_US2:
pdev = &at572d940hf_uart2_device;
configure_usart2_pins(pins);
at91_clock_associate("usart2_clk", &pdev->dev, "usart");
break;
default:
return;
......@@ -857,8 +847,10 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
void __init at91_set_serial_console(unsigned portnr)
{
if (portnr < ATMEL_MAX_UART)
if (portnr < ATMEL_MAX_UART) {
atmel_default_console_device = at91_uarts[portnr];
at572d940hf_set_console_clock(portnr);
}
}
void __init at91_add_device_serial(void)
......
......@@ -222,6 +222,25 @@ static struct clk *periph_clocks[] __initdata = {
// irq0 .. irq1
};
static struct clk_lookup periph_clocks_lookups[] = {
CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc.0", &utmi_clk),
CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc.0", &udphs_clk),
CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.0", &mmc0_clk),
CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.1", &mmc1_clk),
CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk),
CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk),
CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb_clk),
CLKDEV_CON_DEV_ID("ssc", "ssc.0", &ssc0_clk),
CLKDEV_CON_DEV_ID("ssc", "ssc.1", &ssc1_clk),
};
static struct clk_lookup usart_clocks_lookups[] = {
CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck),
CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk),
CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk),
CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk),
};
/*
* The four programmable clocks.
* You must configure pin multiplexing to bring these signals out.
......@@ -258,12 +277,29 @@ static void __init at91cap9_register_clocks(void)
for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
clk_register(periph_clocks[i]);
clkdev_add_table(periph_clocks_lookups,
ARRAY_SIZE(periph_clocks_lookups));
clkdev_add_table(usart_clocks_lookups,
ARRAY_SIZE(usart_clocks_lookups));
clk_register(&pck0);
clk_register(&pck1);
clk_register(&pck2);
clk_register(&pck3);
}
static struct clk_lookup console_clock_lookup;
void __init at91cap9_set_console_clock(int id)
{
if (id >= ARRAY_SIZE(usart_clocks_lookups))
return;
console_clock_lookup.con_id = "usart";
console_clock_lookup.clk = usart_clocks_lookups[id].clk;
clkdev_add(&console_clock_lookup);
}
/* --------------------------------------------------------------------
* GPIO
* -------------------------------------------------------------------- */
......
......@@ -181,10 +181,6 @@ void __init at91_add_device_usba(struct usba_platform_data *data)
/* Pullup pin is handled internally by USB device peripheral */
/* Clocks */
at91_clock_associate("utmi_clk", &at91_usba_udc_device.dev, "hclk");
at91_clock_associate("udphs_clk", &at91_usba_udc_device.dev, "pclk");
platform_device_register(&at91_usba_udc_device);
}
#else
......@@ -355,7 +351,6 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
}
mmc0_data = *data;
at91_clock_associate("mci0_clk", &at91cap9_mmc0_device.dev, "mci_clk");
platform_device_register(&at91cap9_mmc0_device);
} else { /* MCI1 */
/* CLK */
......@@ -373,7 +368,6 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
}
mmc1_data = *data;
at91_clock_associate("mci1_clk", &at91cap9_mmc1_device.dev, "mci_clk");
platform_device_register(&at91cap9_mmc1_device);
}
}
......@@ -614,7 +608,6 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
at91_set_B_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */
at91_set_B_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */
at91_clock_associate("spi0_clk", &at91cap9_spi0_device.dev, "spi_clk");
platform_device_register(&at91cap9_spi0_device);
}
if (enable_spi1) {
......@@ -622,7 +615,6 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
at91_set_A_periph(AT91_PIN_PB13, 0); /* SPI1_MOSI */
at91_set_A_periph(AT91_PIN_PB14, 0); /* SPI1_SPCK */
at91_clock_associate("spi1_clk", &at91cap9_spi1_device.dev, "spi_clk");
platform_device_register(&at91cap9_spi1_device);
}
}
......@@ -659,8 +651,6 @@ static struct platform_device at91cap9_tcb_device = {
static void __init at91_add_device_tc(void)
{
/* this chip has one clock and irq for all three TC channels */
at91_clock_associate("tcb_clk", &at91cap9_tcb_device.dev, "t0_clk");
platform_device_register(&at91cap9_tcb_device);
}
#else
......@@ -1001,12 +991,10 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins)
case AT91CAP9_ID_SSC0:
pdev = &at91cap9_ssc0_device;
configure_ssc0_pins(pins);
at91_clock_associate("ssc0_clk", &pdev->dev, "ssc");
break;
case AT91CAP9_ID_SSC1:
pdev = &at91cap9_ssc1_device;
configure_ssc1_pins(pins);
at91_clock_associate("ssc1_clk", &pdev->dev, "ssc");
break;
default:
return;
......@@ -1205,22 +1193,18 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
case 0: /* DBGU */
pdev = &at91cap9_dbgu_device;
configure_dbgu_pins();
at91_clock_associate("mck", &pdev->dev, "usart");
break;
case AT91CAP9_ID_US0:
pdev = &at91cap9_uart0_device;
configure_usart0_pins(pins);
at91_clock_associate("usart0_clk", &pdev->dev, "usart");
break;
case AT91CAP9_ID_US1:
pdev = &at91cap9_uart1_device;
configure_usart1_pins(pins);
at91_clock_associate("usart1_clk", &pdev->dev, "usart");
break;
case AT91CAP9_ID_US2:
pdev = &at91cap9_uart2_device;
configure_usart2_pins(pins);
at91_clock_associate("usart2_clk", &pdev->dev, "usart");
break;
default:
return;
......@@ -1234,8 +1218,10 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
void __init at91_set_serial_console(unsigned portnr)
{
if (portnr < ATMEL_MAX_UART)
if (portnr < ATMEL_MAX_UART) {
atmel_default_console_device = at91_uarts[portnr];
at91cap9_set_console_clock(portnr);
}
}
void __init at91_add_device_serial(void)
......
......@@ -191,6 +191,26 @@ static struct clk *periph_clocks[] __initdata = {
// irq0 .. irq6
};
static struct clk_lookup periph_clocks_lookups[] = {
CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk),
CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk),
CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk),
CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.1", &tc3_clk),
CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.1", &tc4_clk),
CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.1", &tc5_clk),
CLKDEV_CON_DEV_ID("ssc", "ssc.0", &ssc0_clk),
CLKDEV_CON_DEV_ID("ssc", "ssc.1", &ssc1_clk),
CLKDEV_CON_DEV_ID("ssc", "ssc.2", &ssc2_clk),
};
static struct clk_lookup usart_clocks_lookups[] = {
CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck),
CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk),
CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk),
CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk),
CLKDEV_CON_DEV_ID("usart", "atmel_usart.4", &usart3_clk),
};
/*
* The four programmable clocks.
* You must configure pin multiplexing to bring these signals out.
......@@ -227,12 +247,29 @@ static void __init at91rm9200_register_clocks(void)
for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
clk_register(periph_clocks[i]);
clkdev_add_table(periph_clocks_lookups,
ARRAY_SIZE(periph_clocks_lookups));
clkdev_add_table(usart_clocks_lookups,
ARRAY_SIZE(usart_clocks_lookups));
clk_register(&pck0);
clk_register(&pck1);
clk_register(&pck2);
clk_register(&pck3);
}
static struct clk_lookup console_clock_lookup;
void __init at91rm9200_set_console_clock(int id)
{
if (id >= ARRAY_SIZE(usart_clocks_lookups))
return;
console_clock_lookup.con_id = "usart";
console_clock_lookup.clk = usart_clocks_lookups[id].clk;
clkdev_add(&console_clock_lookup);
}
/* --------------------------------------------------------------------
* GPIO
* -------------------------------------------------------------------- */
......
......@@ -644,15 +644,7 @@ static struct platform_device at91rm9200_tcb1_device = {
static void __init at91_add_device_tc(void)
{
/* this chip has a separate clock and irq for each TC channel */
at91_clock_associate("tc0_clk", &at91rm9200_tcb0_device.dev, "t0_clk");
at91_clock_associate("tc1_clk", &at91rm9200_tcb0_device.dev, "t1_clk");
at91_clock_associate("tc2_clk", &at91rm9200_tcb0_device.dev, "t2_clk");
platform_device_register(&at91rm9200_tcb0_device);
at91_clock_associate("tc3_clk", &at91rm9200_tcb1_device.dev, "t0_clk");
at91_clock_associate("tc4_clk", &at91rm9200_tcb1_device.dev, "t1_clk");
at91_clock_associate("tc5_clk", &at91rm9200_tcb1_device.dev, "t2_clk");
platform_device_register(&at91rm9200_tcb1_device);
}
#else
......@@ -849,17 +841,14 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins)
case AT91RM9200_ID_SSC0:
pdev = &at91rm9200_ssc0_device;
configure_ssc0_pins(pins);
at91_clock_associate("ssc0_clk", &pdev->dev, "ssc");
break;
case AT91RM9200_ID_SSC1:
pdev = &at91rm9200_ssc1_device;
configure_ssc1_pins(pins);
at91_clock_associate("ssc1_clk", &pdev->dev, "ssc");
break;
case AT91RM9200_ID_SSC2:
pdev = &at91rm9200_ssc2_device;
configure_ssc2_pins(pins);
at91_clock_associate("ssc2_clk", &pdev->dev, "ssc");
break;
default:
return;
......@@ -1115,27 +1104,22 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
case 0: /* DBGU */
pdev = &at91rm9200_dbgu_device;
configure_dbgu_pins();
at91_clock_associate("mck", &pdev->dev, "usart");
break;
case AT91RM9200_ID_US0:
pdev = &at91rm9200_uart0_device;
configure_usart0_pins(pins);
at91_clock_associate("usart0_clk", &pdev->dev, "usart");
break;
case AT91RM9200_ID_US1:
pdev = &at91rm9200_uart1_device;
configure_usart1_pins(pins);
at91_clock_associate("usart1_clk", &pdev->dev, "usart");
break;
case AT91RM9200_ID_US2:
pdev = &at91rm9200_uart2_device;
configure_usart2_pins(pins);
at91_clock_associate("usart2_clk", &pdev->dev, "usart");
break;
case AT91RM9200_ID_US3:
pdev = &at91rm9200_uart3_device;
configure_usart3_pins(pins);
at91_clock_associate("usart3_clk", &pdev->dev, "usart");
break;
default:
return;
......@@ -1149,8 +1133,10 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
void __init at91_set_serial_console(unsigned portnr)
{
if (portnr < ATMEL_MAX_UART)
if (portnr < ATMEL_MAX_UART) {
atmel_default_console_device = at91_uarts[portnr];
at91rm9200_set_console_clock(portnr);
}
}
void __init at91_add_device_serial(void)
......
......@@ -231,6 +231,28 @@ static struct clk *periph_clocks[] __initdata = {
// irq0 .. irq2
};
static struct clk_lookup periph_clocks_lookups[] = {
CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk),
CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk),
CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk),
CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk),
CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk),
CLKDEV_CON_DEV_ID("t3_clk", "atmel_tcb.1", &tc3_clk),
CLKDEV_CON_DEV_ID("t4_clk", "atmel_tcb.1", &tc4_clk),
CLKDEV_CON_DEV_ID("t5_clk", "atmel_tcb.1", &tc5_clk),
CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc_clk),
};
static struct clk_lookup usart_clocks_lookups[] = {
CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck),
CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk),
CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk),
CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk),
CLKDEV_CON_DEV_ID("usart", "atmel_usart.4", &usart3_clk),
CLKDEV_CON_DEV_ID("usart", "atmel_usart.5", &usart4_clk),
CLKDEV_CON_DEV_ID("usart", "atmel_usart.6", &usart5_clk),
};
/*
* The two programmable clocks.
* You must configure pin multiplexing to bring these signals out.
......@@ -255,10 +277,27 @@ static void __init at91sam9260_register_clocks(void)
for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
clk_register(periph_clocks[i]);
clkdev_add_table(periph_clocks_lookups,
ARRAY_SIZE(periph_clocks_lookups));
clkdev_add_table(usart_clocks_lookups,
ARRAY_SIZE(usart_clocks_lookups));
clk_register(&pck0);
clk_register(&pck1);
}
static struct clk_lookup console_clock_lookup;
void __init at91sam9260_set_console_clock(int id)
{
if (id >= ARRAY_SIZE(usart_clocks_lookups))
return;
console_clock_lookup.con_id = "usart";
console_clock_lookup.clk = usart_clocks_lookups[id].clk;
clkdev_add(&console_clock_lookup);
}
/* --------------------------------------------------------------------
* GPIO
* -------------------------------------------------------------------- */
......
......@@ -609,7 +609,6 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
at91_set_A_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */
at91_set_A_periph(AT91_PIN_PA2, 0); /* SPI1_SPCK */
at91_clock_associate("spi0_clk", &at91sam9260_spi0_device.dev, "spi_clk");
platform_device_register(&at91sam9260_spi0_device);
}
if (enable_spi1) {
......@@ -617,7 +616,6 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
at91_set_A_periph(AT91_PIN_PB1, 0); /* SPI1_MOSI */
at91_set_A_periph(AT91_PIN_PB2, 0); /* SPI1_SPCK */
at91_clock_associate("spi1_clk", &at91sam9260_spi1_device.dev, "spi_clk");
platform_device_register(&at91sam9260_spi1_device);
}
}
......@@ -694,15 +692,7 @@ static struct platform_device at91sam9260_tcb1_device = {
static void __init at91_add_device_tc(void)
{
/* this chip has a separate clock and irq for each TC channel */
at91_clock_associate("tc0_clk", &at91sam9260_tcb0_device.dev, "t0_clk");
at91_clock_associate("tc1_clk", &at91sam9260_tcb0_device.dev, "t1_clk");
at91_clock_associate("tc2_clk", &at91sam9260_tcb0_device.dev, "t2_clk");
platform_device_register(&at91sam9260_tcb0_device);
at91_clock_associate("tc3_clk", &at91sam9260_tcb1_device.dev, "t0_clk");
at91_clock_associate("tc4_clk", &at91sam9260_tcb1_device.dev, "t1_clk");
at91_clock_associate("tc5_clk", &at91sam9260_tcb1_device.dev, "t2_clk");
platform_device_register(&at91sam9260_tcb1_device);
}
#else
......@@ -820,7 +810,6 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins)
case AT91SAM9260_ID_SSC:
pdev = &at91sam9260_ssc_device;
configure_ssc_pins(pins);
at91_clock_associate("ssc_clk", &pdev->dev, "pclk");
break;
default:
return;
......@@ -1145,37 +1134,30 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
case 0: /* DBGU */
pdev = &at91sam9260_dbgu_device;
configure_dbgu_pins();
at91_clock_associate("mck", &pdev->dev, "usart");
break;
case AT91SAM9260_ID_US0:
pdev = &at91sam9260_uart0_device;
configure_usart0_pins(pins);
at91_clock_associate("usart0_clk", &pdev->dev, "usart");
break;
case AT91SAM9260_ID_US1:
pdev = &at91sam9260_uart1_device;
configure_usart1_pins(pins);
at91_clock_associate("usart1_clk", &pdev->dev, "usart");
break;
case AT91SAM9260_ID_US2:
pdev = &at91sam9260_uart2_device;
configure_usart2_pins(pins);
at91_clock_associate("usart2_clk", &pdev->dev, "usart");
break;
case AT91SAM9260_ID_US3:
pdev = &at91sam9260_uart3_device;
configure_usart3_pins(pins);
at91_clock_associate("usart3_clk", &pdev->dev, "usart");
break;
case AT91SAM9260_ID_US4:
pdev = &at91sam9260_uart4_device;
configure_usart4_pins();
at91_clock_associate("usart4_clk", &pdev->dev, "usart");
break;
case AT91SAM9260_ID_US5:
pdev = &at91sam9260_uart5_device;
configure_usart5_pins();
at91_clock_associate("usart5_clk", &pdev->dev, "usart");
break;
default:
return;
......@@ -1189,8 +1171,10 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
void __init at91_set_serial_console(unsigned portnr)
{
if (portnr < ATMEL_MAX_UART)
if (portnr < ATMEL_MAX_UART) {
atmel_default_console_device = at91_uarts[portnr];
at91sam9260_set_console_clock(portnr);
}
}
void __init at91_add_device_serial(void)
......
......@@ -178,6 +178,24 @@ static struct clk *periph_clocks[] __initdata = {
// irq0 .. irq2
};
static struct clk_lookup periph_clocks_lookups[] = {
CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk),
CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk),
CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk),
CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk),
CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc1_clk),
CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk),
CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
CLKDEV_CON_DEV_ID("pclk", "ssc.2", &ssc2_clk),
};
static struct clk_lookup usart_clocks_lookups[] = {
CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck),
CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk),
CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk),
CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk),
};
/*
* The four programmable clocks.
* You must configure pin multiplexing to bring these signals out.
......@@ -228,6 +246,11 @@ static void __init at91sam9261_register_clocks(void)
for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
clk_register(periph_clocks[i]);
clkdev_add_table(periph_clocks_lookups,
ARRAY_SIZE(periph_clocks_lookups));
clkdev_add_table(usart_clocks_lookups,
ARRAY_SIZE(usart_clocks_lookups));
clk_register(&pck0);
clk_register(&pck1);
clk_register(&pck2);
......@@ -237,6 +260,18 @@ static void __init at91sam9261_register_clocks(void)
clk_register(&hck1);
}
static struct clk_lookup console_clock_lookup;
void __init at91sam9261_set_console_clock(int id)
{
if (id >= ARRAY_SIZE(usart_clocks_lookups))
return;
console_clock_lookup.con_id = "usart";
console_clock_lookup.clk = usart_clocks_lookups[id].clk;
clkdev_add(&console_clock_lookup);
}
/* --------------------------------------------------------------------
* GPIO
* -------------------------------------------------------------------- */
......
......@@ -426,7 +426,6 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
at91_set_A_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */