Commit b8b572e1 authored by Stephen Rothwell's avatar Stephen Rothwell Committed by Paul Mackerras
Browse files

powerpc: Move include files to arch/powerpc/include/asm

from include/asm-powerpc.  This is the result of a

mkdir arch/powerpc/include/asm
git mv include/asm-powerpc/* arch/powerpc/include/asm

Followed by a few documentation/comment fixups and a couple of places
where <asm-powepc/...> was being used explicitly.  Of the latter only
one was outside the arch code and it is a driver only built for powerpc.

Signed-off-by: default avatarStephen Rothwell <>
Signed-off-by: default avatarPaul Mackerras <>
parent 2b12a4c5
......@@ -278,7 +278,7 @@ it with special cases.
a 64-bit platform.
d) request and get assigned a platform number (see PLATFORM_*
constants in include/asm-powerpc/processor.h
constants in arch/powerpc/include/asm/processor.h
32-bit embedded kernels:
......@@ -340,7 +340,7 @@ the block to RAM before passing it to the kernel.
The kernel is entered with r3 pointing to an area of memory that is
roughly described in include/asm-powerpc/prom.h by the structure
roughly described in arch/powerpc/include/asm/prom.h by the structure
struct boot_param_header {
......@@ -133,7 +133,7 @@ error. Given an arbitrary address, the routine
pci_get_device_by_addr() will find the pci device associated
with that address (if any).
The default include/asm-powerpc/io.h macros readb(), inb(), insb(),
The default arch/powerpc/include/asm/io.h macros readb(), inb(), insb(),
etc. include a check to see if the i/o read returned all-0xff's.
If so, these make a call to eeh_dn_check_failure(), which in turn
asks the firmware if the all-ff's value is the sign of a true EEH
......@@ -6,7 +6,7 @@
* Low-level I/O routines.
* Copied from <file:include/asm-powerpc/io.h> (which has no copyright)
* Copied from <file:arch/powerpc/include/asm/io.h> (which has no copyright)
static inline int in_8(const volatile unsigned char *addr)
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment