Commit b73adef6 authored by Florian Fainelli's avatar Florian Fainelli Committed by David S. Miller

net: dsa: integrate with SWITCHDEV for HW bridging

In order to support bridging offloads in DSA switch drivers, select
NET_SWITCHDEV to get access to the port_stp_update and parent_get_id
NDOs that we are required to implement.

To facilitate the integratation at the DSA driver level, we implement 3
types of operations:

- port_join_bridge
- port_leave_bridge
- port_stp_update

DSA will resolve which switch ports that are currently bridge port
members as some Switch hardware/drivers need to know about that to limit
the register programming to just the relevant registers (especially for
slow MDIO buses).

We also take care of setting the correct STP state when slave network
devices are brought up/down while being bridge members.

Finally, when a port is leaving the bridge, we make sure we set in
BR_STATE_FORWARDING state, otherwise the bridge layer would leave it
disabled as a result of having left the bridge.
Signed-off-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Reviewed-by: default avatarGuenter Roeck <linux@roeck-us.net>
Tested-by: default avatarGuenter Roeck <linux@roeck-us.net>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent d87d6f44
......@@ -275,6 +275,16 @@ struct dsa_switch_driver {
int (*get_regs_len)(struct dsa_switch *ds, int port);
void (*get_regs)(struct dsa_switch *ds, int port,
struct ethtool_regs *regs, void *p);
/*
* Bridge integration
*/
int (*port_join_bridge)(struct dsa_switch *ds, int port,
u32 br_port_mask);
int (*port_leave_bridge)(struct dsa_switch *ds, int port,
u32 br_port_mask);
int (*port_stp_update)(struct dsa_switch *ds, int port,
u8 state);
};
void register_switch_driver(struct dsa_switch_driver *type);
......
......@@ -8,6 +8,7 @@ config NET_DSA
tristate
depends on HAVE_NET_DSA
select PHYLIB
select NET_SWITCHDEV
if NET_DSA
......
......@@ -826,6 +826,10 @@ static struct packet_type dsa_pack_type __read_mostly = {
.func = dsa_switch_rcv,
};
static struct notifier_block dsa_netdevice_nb __read_mostly = {
.notifier_call = dsa_slave_netdevice_event,
};
#ifdef CONFIG_PM_SLEEP
static int dsa_suspend(struct device *d)
{
......@@ -884,6 +888,8 @@ static int __init dsa_init_module(void)
{
int rc;
register_netdevice_notifier(&dsa_netdevice_nb);
rc = platform_driver_register(&dsa_driver);
if (rc)
return rc;
......@@ -896,6 +902,7 @@ module_init(dsa_init_module);
static void __exit dsa_cleanup_module(void)
{
unregister_netdevice_notifier(&dsa_netdevice_nb);
dev_remove_pack(&dsa_pack_type);
platform_driver_unregister(&dsa_driver);
}
......
......@@ -45,6 +45,8 @@ struct dsa_slave_priv {
int old_link;
int old_pause;
int old_duplex;
struct net_device *bridge_dev;
};
/* dsa.c */
......@@ -57,6 +59,8 @@ int dsa_slave_create(struct dsa_switch *ds, struct device *parent,
int port, char *name);
int dsa_slave_suspend(struct net_device *slave_dev);
int dsa_slave_resume(struct net_device *slave_dev);
int dsa_slave_netdevice_event(struct notifier_block *unused,
unsigned long event, void *ptr);
/* tag_dsa.c */
extern const struct dsa_device_ops dsa_netdev_ops;
......
......@@ -10,10 +10,13 @@
#include <linux/list.h>
#include <linux/etherdevice.h>
#include <linux/netdevice.h>
#include <linux/phy.h>
#include <linux/phy_fixed.h>
#include <linux/of_net.h>
#include <linux/of_mdio.h>
#include <net/rtnetlink.h>
#include <linux/if_bridge.h>
#include "dsa_priv.h"
/* slave mii_bus handling ***************************************************/
......@@ -60,11 +63,18 @@ static int dsa_slave_init(struct net_device *dev)
return 0;
}
static inline bool dsa_port_is_bridged(struct dsa_slave_priv *p)
{
return !!p->bridge_dev;
}
static int dsa_slave_open(struct net_device *dev)
{
struct dsa_slave_priv *p = netdev_priv(dev);
struct net_device *master = p->parent->dst->master_netdev;
struct dsa_switch *ds = p->parent;
u8 stp_state = dsa_port_is_bridged(p) ?
BR_STATE_BLOCKING : BR_STATE_FORWARDING;
int err;
if (!(master->flags & IFF_UP))
......@@ -93,6 +103,9 @@ static int dsa_slave_open(struct net_device *dev)
goto clear_promisc;
}
if (ds->drv->port_stp_update)
ds->drv->port_stp_update(ds, p->port, stp_state);
if (p->phy)
phy_start(p->phy);
......@@ -133,6 +146,9 @@ static int dsa_slave_close(struct net_device *dev)
if (ds->drv->port_disable)
ds->drv->port_disable(ds, p->port, p->phy);
if (ds->drv->port_stp_update)
ds->drv->port_stp_update(ds, p->port, BR_STATE_DISABLED);
return 0;
}
......@@ -194,6 +210,95 @@ static int dsa_slave_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
return -EOPNOTSUPP;
}
/* Return a bitmask of all ports being currently bridged within a given bridge
* device. Note that on leave, the mask will still return the bitmask of ports
* currently bridged, prior to port removal, and this is exactly what we want.
*/
static u32 dsa_slave_br_port_mask(struct dsa_switch *ds,
struct net_device *bridge)
{
struct dsa_slave_priv *p;
unsigned int port;
u32 mask = 0;
for (port = 0; port < DSA_MAX_PORTS; port++) {
if (!((1 << port) & ds->phys_port_mask))
continue;
if (!ds->ports[port])
continue;
p = netdev_priv(ds->ports[port]);
if (ds->ports[port]->priv_flags & IFF_BRIDGE_PORT &&
p->bridge_dev == bridge)
mask |= 1 << port;
}
return mask;
}
static int dsa_slave_stp_update(struct net_device *dev, u8 state)
{
struct dsa_slave_priv *p = netdev_priv(dev);
struct dsa_switch *ds = p->parent;
int ret = -EOPNOTSUPP;
if (ds->drv->port_stp_update)
ret = ds->drv->port_stp_update(ds, p->port, state);
return ret;
}
static int dsa_slave_bridge_port_join(struct net_device *dev,
struct net_device *br)
{
struct dsa_slave_priv *p = netdev_priv(dev);
struct dsa_switch *ds = p->parent;
int ret = -EOPNOTSUPP;
p->bridge_dev = br;
if (ds->drv->port_join_bridge)
ret = ds->drv->port_join_bridge(ds, p->port,
dsa_slave_br_port_mask(ds, br));
return ret;
}
static int dsa_slave_bridge_port_leave(struct net_device *dev)
{
struct dsa_slave_priv *p = netdev_priv(dev);
struct dsa_switch *ds = p->parent;
int ret = -EOPNOTSUPP;
if (ds->drv->port_leave_bridge)
ret = ds->drv->port_leave_bridge(ds, p->port,
dsa_slave_br_port_mask(ds, p->bridge_dev));
p->bridge_dev = NULL;
/* Port left the bridge, put in BR_STATE_DISABLED by the bridge layer,
* so allow it to be in BR_STATE_FORWARDING to be kept functional
*/
dsa_slave_stp_update(dev, BR_STATE_FORWARDING);
return ret;
}
static int dsa_slave_parent_id_get(struct net_device *dev,
struct netdev_phys_item_id *psid)
{
struct dsa_slave_priv *p = netdev_priv(dev);
struct dsa_switch *ds = p->parent;
psid->id_len = sizeof(ds->index);
memcpy(&psid->id, &ds->index, psid->id_len);
return 0;
}
static netdev_tx_t dsa_slave_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct dsa_slave_priv *p = netdev_priv(dev);
......@@ -470,6 +575,8 @@ static const struct net_device_ops dsa_slave_netdev_ops = {
.ndo_set_rx_mode = dsa_slave_set_rx_mode,
.ndo_set_mac_address = dsa_slave_set_mac_address,
.ndo_do_ioctl = dsa_slave_ioctl,
.ndo_switch_parent_id_get = dsa_slave_parent_id_get,
.ndo_switch_port_stp_update = dsa_slave_stp_update,
};
static void dsa_slave_adjust_link(struct net_device *dev)
......@@ -684,3 +791,45 @@ int dsa_slave_create(struct dsa_switch *ds, struct device *parent,
return 0;
}
static bool dsa_slave_dev_check(struct net_device *dev)
{
return dev->netdev_ops == &dsa_slave_netdev_ops;
}
static int dsa_slave_master_changed(struct net_device *dev)
{
struct net_device *master = netdev_master_upper_dev_get(dev);
int err = 0;
if (master && master->rtnl_link_ops &&
!strcmp(master->rtnl_link_ops->kind, "bridge"))
err = dsa_slave_bridge_port_join(dev, master);
else
err = dsa_slave_bridge_port_leave(dev);
return err;
}
int dsa_slave_netdevice_event(struct notifier_block *unused,
unsigned long event, void *ptr)
{
struct net_device *dev;
int err = 0;
switch (event) {
case NETDEV_CHANGEUPPER:
dev = netdev_notifier_info_to_dev(ptr);
if (!dsa_slave_dev_check(dev))
goto out;
err = dsa_slave_master_changed(dev);
if (err)
netdev_warn(dev, "failed to reflect master change\n");
break;
}
out:
return NOTIFY_DONE;
}
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment